tender for isolation control and installation , gi pipe 1 2 inch class c for domestic png gas service piping installation and connection work , gi pipe 3 4 inch class c for domestic png gas service piping installation and connection work , gi pipe 1 inch class c for domestic png gas service piping installation and connection work , gi elbow 1 2 inch for domestic png gas piping direction change and threaded pipe connection , gi elbow 3 4 inch for domestic png gas piping direction change and threaded pipe connection , gi e tee 1 2 inch for domestic png gas piping branch connection and distribution , gi e tee 3 4 inch for domestic png gas piping branch connection and distribution , gi socket 1 2 inch for domestic png gas pipe threaded jointing and connection , gi socket 3 4 inch for domestic png gas pipe threaded jointing and connection , gi reducing tee 3 4 inch x 1 2 inch for domestic png gas piping branch connection and size reduction , gi union 1 2 inch for domestic png gas pipe connection disconnection and maintenance , gi union 3 4 inch for domestic png gas pipe connection disconnection and maintenance , gi plug 1 2 inch for closing and terminating domestic png gas pipe or fitting connections , gi plug 3 4 inch for closing and terminating domestic png gas pipe or fitting connections , gi plug 1 inch for closing and terminating domestic png gas pipe or fitting connections , gi clamp 1 2 inch for supporting fixing and securing domestic png gas piping on walls and supporting surfaces , gi clamp 3 4 inch for supporting fixing and securing domestic png gas piping on walls and supporting surfaces , gi clamp 1 inch for supporting fixing and securing domestic png gas piping on walls and supporting surfaces , gi nipple 1 2 inch x 2 inch for domestic png gas pipe valve and fitting threaded connection , gi nipple 1 2 inch x 3 inch for domestic png gas pipe valve and fitting threaded connection , gi nipple 1 2 inch x 4 inch for domestic png gas pipe valve and fitting threaded connection , gi nipple 1 2 inch x 6 inch for domestic png gas pipe valve and fitting threaded connection , gi nipple 3 4 inch x 2 inch for domestic png gas pipe valve and fitting threaded connection , gi nipple 3 4 inch x 3 inch for domestic png gas pipe valve and fitting threaded connection , gi nipple 3 4 inch x 4 inch for domestic png gas pipe valve and fitting threaded connection , gi nipple 3 4 inch x 6 inch for domestic png gas pipe valve and fitting threaded connection , meter bracket clamp u type 11 x 19 cm for domestic png gas meter support fixing and installation , plate marker 300 x 250 mm 3 mm thick for domestic png gas installation identification marking and asset identification , teflon tape for sealing threaded joints and preventing leakage in domestic png gas piping fittings and connections , ss screw 35 x 8 mm for fixing and supporting domestic png gas piping fittings brackets and installation components , rawal plug for fixing and anchoring domestic png gas pipe supports clamps brackets and installation, gi and copper tubes, brass adaptor, 1/2 inch x 12 mm, suitable for connecting the specified png domestic gas service components. the adaptor shall be manufactured from good-quality corrosion-resistant brass, accurately machined, free from cracks, burrs, sharp edges and casting defects, and shall provide proper dimensional compatibility and leak-tight connection. threads and connection ends shall be clean and properly formed. the item shall be suitable for natural gas service and domestic png meter installation/conversion work., brass disconnection union, 3/4 inch x 12 mm, suitable for connection and disconnection of png domestic gas piping/metering components. the fitting shall be made from good-quality corrosion-resistant brass, properly machined and dimensionally accurate. it shall have clean, properly formed connection ends and threads, free from cracks, burrs and other defects, and shall provide a secure, leak-tight joint under normal png service conditions., meter inlet fitting, 3/4 inch x 3/4 inch, suitable for connecting the gas meter inlet to the associated png service piping. the fitting shall be made from good-quality brass or approved equivalent material suitable for natural gas service, with accurate dimensions, properly formed threads and smooth internal passages. it shall be free from cracks, burrs and manufacturing defects and shall permit secure, leak-tight installation of domestic png meters., meter outlet fitting, 3/4 inch x 12 mm, suitable for connecting the gas meter outlet with the downstream png service connection. the fitting shall be manufactured from good-quality corrosion-resistant material suitable for natural gas service. dimensions, threads and connection ends shall be accurate and properly finished, with no cracks, burrs or visible defects, and shall ensure a secure and leak-tight joint during normal operation., copper pipe, 2 mm, suitable for domestic png gas installation and meter connection work as specified. the pipe shall be of suitable copper material and quality for natural gas service, with uniform dimensions, clean internal and external surfaces and freedom from cracks, pinholes, excessive dents, corrosion or other manufacturing defects. it shall be supplied in usable lengths/condition and shall permit proper cutting, bending, jointing and leak-tight installation., copper socket, 12 mm, pre-soldered, suitable for joining 12 mm copper pipe used in domestic png gas installation. the socket shall be manufactured from suitable copper/copper-alloy material, accurately dimensioned and properly finished. the pre-soldered jointing provision shall enable reliable installation when used with the specified copper pipe. the fitting shall be free from cracks, burrs and deformation and shall provide a secure, leak-tight connection suitable for natural gas service., copper elbow, 12 mm, pre-soldered, suitable for making directional changes in 12 mm copper pipe used for domestic png gas installation. the fitting shall be made from suitable copper/copper-alloy material with accurate dimensions and smooth connection ends. it shall be properly formed, free from cracks, deformation and burrs, and suitable for creating a secure, leak-tight connection in natural gas service when installed using the approved joining procedure., soldering wire suitable for joining copper fittings and copper piping used in domestic png installation works. the solder shall be of suitable composition and quality for the intended application and shall provide reliable wetting and joint formation when used with the approved flux and installation procedure. it shall be supplied clean, free from excessive oxidation and contamination, and suitable for producing durable, leak-tight joints under normal service conditions., flux suitable for soldering/joining copper pipes and fittings used in domestic png gas installation works. the flux shall be compatible with the specified solder and copper materials and shall promote proper wetting and joint formation. it shall be of consistent quality, free from harmful contamination and suitable for the approved installation procedure. residues shall be capable of being properly cleaned after jointing to avoid corrosion or deterioration of the piping system., pvc clip suitable for securing/supporting domestic png service piping or associated installation components. the clip shall be manufactured from good-quality, durable pvc or approved equivalent material, resistant to normal environmental conditions and suitable for the intended pipe size. it shall be free from cracks, sharp edges and deformation and shall provide firm support without damaging or excessively compressing the pipe., rubber hose, 1 metre length, suitable for the specified domestic png installation/service application. the hose shall be manufactured from good-quality flexible material compatible with natural gas service and normal operating conditions. it shall have uniform construction, suitable flexibility and adequate resistance to ageing, cracking and deterioration. hose ends shall be suitable for secure connection with the associated fittings and shall permit a leak-tight installation., rubber hose, 1.5 metre length, suitable for the specified domestic png installation/service application. the hose shall be made from good-quality flexible material compatible with natural gas service and the expected operating environment. it shall be free from cuts, cracks, blisters, kinks and manufacturing defects and shall have suitable connection ends for secure installation. the hose shall provide a durable and leak-tight connection when installed with approved fittings., app valve, 1/2 inch, suitable for domestic png gas installation and isolation/control application. the valve shall be manufactured from suitable gas-service material, with corrosion-resistant body and properly finished connection ends. it shall provide smooth operation, positive shut-off and reliable sealing under normal natural gas service conditions. the valve shall be free from casting, machining or thread defects and shall be suitable for safe installation in the png domestic service line., isolation valve (iv), 1/2 inch, suitable for isolation of domestic png gas service piping or connected equipment. the valve shall be of suitable construction and material for natural gas service and shall provide positive shut-off with reliable sealing. connection ends shall be accurately dimensioned and properly threaded/finished. the valve shall operate smoothly, be free from visible defects and be suitable for repeated operation under normal service conditions., isolation valve (iv), 3/4 inch, suitable for isolation of domestic png gas service piping or connected equipment. the valve shall be manufactured from suitable gas-service material and shall provide positive shut-off and dependable sealing. connection ends shall be accurate and properly finished, with no cracks, burrs or thread defects. the valve shall operate smoothly and shall be suitable for installation in domestic png gas distribution/service arrangements., isolation valve (iv), 1 inch, suitable for isolation of domestic png gas piping or associated equipment. the valve shall be manufactured from suitable material compatible with natural gas service and shall provide reliable shut-off and sealing. it shall have accurately formed connection ends, smooth operation and robust construction suitable for normal field installation. the valve shall be free from manufacturing defects and shall be suitable for safe, leak-tight service., gi pipe, 1/2 inch, class c, suitable for domestic png gas installation/service piping as specified. the pipe shall be galvanized iron/steel of the specified class, with uniform dimensions, sound galvanizing and clean internal and external surfaces. it shall be free from cracks, excessive dents, corrosion, laminations and other defects. pipe ends shall be suitable for threading and joining with compatible fittings and shall provide durable service under normal installation conditions., gi pipe, 3/4 inch, class c, suitable for domestic png gas installation/service piping. the pipe shall be manufactured from galvanized iron/steel conforming to the specified class and shall have uniform wall thickness, sound galvanizing and properly finished ends suitable for threading. it shall be free from cracks, laminations, excessive dents, corrosion and other defects and shall be suitable for secure and leak-tight connection with compatible gi fittings., gi pipe, 1 inch, class c, suitable for domestic png gas installation/service piping. the pipe shall be of good-quality galvanized iron/steel construction with uniform dimensions and sound galvanizing. it shall have properly finished ends suitable for threading and joining and shall be free from cracks, laminations, excessive dents, corrosion and other manufacturing defects. the pipe shall be suitable for durable installation and normal natural gas service conditions., gi elbow, 1/2 inch, suitable for changing the direction of 1/2 inch gi piping used in png installation work. the fitting shall be made from good-quality galvanized iron/steel or approved equivalent material, accurately dimensioned and properly threaded. it shall be free from cracks, casting defects, burrs and damaged threads and shall provide a secure, leak-tight connection with compatible gi pipe and fittings., gi elbow, 3/4 inch, suitable for changing the direction of 3/4 inch gi piping used in domestic png installation work. the fitting shall be of good-quality galvanized iron/steel or approved equivalent construction, with accurately formed threads and smooth surfaces. it shall be free from cracks, deformation, burrs and thread defects and shall provide a durable, secure and leak-tight connection when properly installed., gi e-tee, 1/2 inch, suitable for branching 1/2 inch gi piping in domestic png installation work. the tee shall be manufactured from suitable galvanized iron/steel or approved equivalent material, with accurate dimensions and properly formed threaded ends. it shall be free from cracks, casting defects, burrs and damaged threads and shall provide secure and leak-tight connections with compatible pipe and fittings., gi e-tee, 3/4 inch, suitable for branching 3/4 inch gi piping in domestic png installation work. the fitting shall be made from good-quality galvanized iron/steel or approved equivalent material, properly dimensioned and threaded. it shall have sound construction, clean threads and smooth connection surfaces and shall be free from cracks, deformation and manufacturing defects. the tee shall provide secure and leak-tight connections after installation., gi socket, 1/2 inch, suitable for joining two compatible 1/2 inch gi pipe sections in domestic png installation. the socket shall be manufactured from suitable galvanized iron/steel or approved equivalent material, with accurate internal threads and proper dimensional compatibility. it shall be free from cracks, burrs, damaged threads and other defects and shall permit secure, leak-tight jointing using the approved sealing method., gi socket, 3/4 inch, suitable for joining two compatible 3/4 inch gi pipe sections in domestic png installation. the socket shall be manufactured from suitable galvanized iron/steel or approved equivalent material with accurately formed internal threads. it shall be free from cracks, deformation, burrs and thread defects and shall provide reliable mechanical engagement and a secure, leak-tight connection when installed with compatible piping., gi reducing tee, 3/4 inch x 1/2 inch, suitable for making a branch connection between the specified gi pipe sizes in domestic png installation. the fitting shall be made from good-quality galvanized iron/steel or approved equivalent material with accurate dimensions and properly formed threads. it shall be free from cracks, burrs and casting defects and shall provide secure, leak-tight connections with compatible piping and fittings., gi union, 1/2 inch, suitable for connecting and allowing convenient disconnection of 1/2 inch gi piping used in domestic png installation. the union shall be manufactured from suitable galvanized iron/steel or approved equivalent material, with accurately formed threads and mating surfaces. it shall be free from cracks, burrs and thread damage and shall provide a durable, secure and leak-tight joint during normal service., gi union, 3/4 inch, suitable for connecting and allowing convenient disconnection of 3/4 inch gi piping used in domestic png installation. the fitting shall be made from suitable galvanized iron/steel or approved equivalent material, with accurate dimensions and properly finished threads. it shall be free from manufacturing defects and shall provide reliable mechanical connection, easy maintenance/disconnection and leak-tight service., gi plug, 1/2 inch, suitable for closing/sealing a 1/2 inch threaded gi pipe or fitting connection in domestic png installation. the plug shall be made from suitable galvanized iron/steel or approved equivalent material with properly formed external threads. it shall be free from cracks, burrs and thread defects and shall provide secure sealing with the approved jointing/sealing method under normal natural gas service conditions., gi plug, 3/4 inch, suitable for closing/sealing a 3/4 inch threaded gi pipe or fitting connection in domestic png installation. the plug shall be manufactured from suitable galvanized iron/steel or approved equivalent material, with accurate external threads and sound construction. it shall be free from cracks, burrs and deformation and shall provide a secure, leak-tight closure when installed with the approved sealing material., gi plug, 1 inch, suitable for closing/sealing a 1 inch threaded gi pipe or fitting connection in domestic png installation. the plug shall be made from good-quality galvanized iron/steel or approved equivalent material, with accurately formed external threads. it shall be free from cracks, casting defects, burrs and damaged threads and shall provide reliable mechanical engagement and leak-tight sealing under normal service conditions., gi clamp, 1/2 inch, suitable for supporting and securing 1/2 inch gi pipe in domestic png installation. the clamp shall be manufactured from suitable durable material with adequate strength and corrosion resistance for the intended environment. it shall be dimensionally suitable for the specified pipe size, free from sharp edges and defects, and capable of securely holding the pipe without causing damage, excessive deformation or coating deterioration., gi clamp, 3/4 inch, suitable for supporting and securing 3/4 inch gi pipe in domestic png installation. the clamp shall be of good-quality construction, dimensionally compatible with the specified pipe and suitable for normal indoor/outdoor installation conditions. it shall provide firm support without damaging the pipe and shall be free from sharp edges, cracks, deformation and other defects. fixing arrangement shall be suitable for secure installation., gi clamp, 1 inch, suitable for supporting and securing 1 inch gi pipe in domestic png installation. the clamp shall be manufactured from suitable durable and corrosion-resistant material and shall have adequate mechanical strength for the intended service. it shall fit the specified pipe size correctly, have smooth edges and provide firm support without damaging or excessively compressing the pipe., gi nipple, 1/2 inch x 2 inch, suitable for extending or connecting 1/2 inch threaded gi piping and fittings in domestic png installation. the nipple shall be manufactured from suitable galvanized iron/steel or approved equivalent material with accurately formed external threads at both ends. it shall be free from cracks, burrs and thread defects and shall provide a secure, leak-tight connection using the approved jointing method., gi nipple, 1/2 inch x 3 inch, suitable for extending or connecting 1/2 inch threaded gi piping and fittings in domestic png installation. the nipple shall be of good-quality galvanized iron/steel or approved equivalent construction with properly formed external threads at both ends. it shall have accurate dimensions and be free from cracks, deformation, burrs and damaged threads, providing secure and leak-tight connection after installation., gi nipple, 1/2 inch x 4 inch, suitable for extending or connecting 1/2 inch threaded gi piping and fittings in domestic png installation. the fitting shall be manufactured from suitable galvanized iron/steel or approved equivalent material, with accurate length and properly formed external threads at both ends. it shall be free from cracks, burrs and thread defects and shall provide durable, secure and leak-tight service., gi nipple, 1/2 inch x 6 inch, suitable for extending or connecting 1/2 inch threaded gi piping and fittings in domestic png installation. the nipple shall be made from suitable galvanized iron/steel or approved equivalent material with accurately formed external threads. it shall have sound construction, proper dimensions and clean threads, and shall be free from cracks, burrs, deformation and other manufacturing defects., gi nipple, 3/4 inch x 2 inch, suitable for extending or connecting 3/4 inch threaded gi piping and fittings in domestic png installation. the nipple shall be manufactured from suitable galvanized iron/steel or approved equivalent material with accurately formed external threads at both ends. it shall be dimensionally correct, free from cracks and burrs, and capable of providing a secure and leak-tight threaded connection., gi nipple, 3/4 inch x 3 inch, suitable for extending or connecting 3/4 inch threaded gi piping and fittings in domestic png installation. the fitting shall be of good-quality galvanized iron/steel or approved equivalent construction with accurate dimensions and properly formed external threads. it shall be free from cracks, deformation, burrs and damaged threads and shall provide reliable leak-tight service when installed correctly., gi nipple, 3/4 inch x 4 inch, suitable for extending or connecting 3/4 inch threaded gi piping and fittings in domestic png installation. the nipple shall be manufactured from suitable galvanized iron/steel or approved equivalent material, with proper length, accurate dimensions and clean external threads at both ends. it shall be free from cracks, burrs and manufacturing defects and suitable for secure threaded jointing., gi nipple, 3/4 inch x 6 inch, suitable for extending or connecting 3/4 inch threaded gi piping and fittings in domestic png installation. the nipple shall be made from suitable galvanized iron/steel or approved equivalent material with properly formed external threads and sound construction. it shall be free from cracks, deformation, burrs and damaged threads and shall provide a durable, secure and leak-tight connection., meter bracket, clamp u-type, approximately 11 x 19 cm, suitable for supporting and securely mounting the domestic png gas meter as specified. the bracket shall be of robust construction and suitable for the intended meter mounting arrangement. it shall have adequate mechanical strength, proper dimensional accuracy and corrosion resistance suitable for the installation environment. edges shall be smooth and free from sharp projections, and the bracket shall permit firm and stable meter installation., plate marker, approximately 300 x 250 mm and 3 mm thick, suitable for identification/marking of the specified png installation. the plate shall be manufactured from durable material suitable for the intended indoor/outdoor service environment and shall have the specified dimensions and thickness. the surface shall be suitable for clear, durable marking/identification and shall be free from excessive warping, sharp edges, cracks and manufacturing defects., teflon tape suitable for sealing threaded joints in domestic png gas piping and fittings. the tape shall be of good-quality ptfe material compatible with natural gas service and suitable for the specified threaded connections. it shall be uniform, clean and free from tears or contamination and shall provide effective sealing when correctly applied. the tape shall be suitable for normal temperature and pressure conditions associated with domestic png installation work., ss screw, 35 x 8 mm, suitable for fixing/supporting components used in domestic png installation works. the screw shall be manufactured from suitable stainless-steel material with adequate mechanical strength and corrosion resistance. it shall have accurately formed threads, a properly finished head and a sharp/appropriate point suitable for the intended fixing application. the screw shall be free from rust, cracks, damaged threads and other manufacturing defects., rawal plug suitable for anchoring/fixing supports, clamps, brackets or associated components to masonry/concrete surfaces in domestic png installation works. the plug shall be manufactured from good-quality durable material with suitable expansion characteristics and dimensional compatibility with the specified screw. it shall be free from cracks and deformation and shall provide reliable holding strength when installed in accordance with the manufacturer-approved method., m/f elbow, 1/2 inch, suitable for connecting 1/2 inch threaded png piping where a male-to-female directional connection is required. the fitting shall be manufactured from suitable material compatible with natural gas service, with accurately formed male and female threads. it shall be free from cracks, burrs, deformation and thread defects and shall provide a secure, leak-tight connection with compatible piping and fittings., s.s. plate suitable for the specified domestic png installation, with hole diameter suitable for 1/2 inch pipe. the plate shall be manufactured from good-quality stainless steel with adequate strength and corrosion resistance for the intended service environment. the plate shall have a properly formed hole suitable for accommodating the specified 1/2 inch pipe, with smooth edges and no sharp projections. it shall be dimensionally accurate, free from cracks, excessive deformation and surface defects, and suitable for secure installation.
