tender for annealed, peeled, ground, straightened and 100% magna flux crack, annealed, peeled, ground, straightened and 100% magna flux crack tested spring steel round rods s ize 21.7 mm diameter x 1615 mm long. material grade 52cr4mo2v according to is-3195- 1992 (reaffirmed 2022 or l atest). the technical specification of the ss round rods shall governed by rdso specification no. wd-01-hls-94 rev. 05 of dec-2024 or latest for chemical composition to manufacturing of bars to final packing and transportation. in ad dition to above the following should be ensured by supplier: i) dimensional tolerance in diameter shall be + 0.1mm/- 0.0 mm and in length shall be within +10.0 mm/-0.0 mm. ii)corrosion protection: as per clause 6.3.1 & 6.3.2 of rds o spec. rdso/2017/cg-01 (rev.03) of jan; 2025. the bars/rods shall be coated with lacquer, cellulose, pigmented, fi nishing, glossy to is: 5691-1970 (latest) to a dft of corrosion protection layer shall be 3-5 microns. iii) packing and t ransportation: 1.1 after the application coating is dried up, bio degradable material shall be used for packing. if any plastic material is used for packing, necessary government guidelines should be followed. to avoid metal to metal c ontact spiral rings shall be provided on each bars/rods. 1.2 all other packing condition shall be as per rdso spec. r dso/2017/cg-01 (rev.03) of jan-2025. in addition to above all necessary test certificate as per clause 9.2.1 has to b e submitted by supplier also any other relevant para of the rdso spec. no. rdso/2017/cg-01(rev. 03), jan.25 shoul d be ensured by supplier. - warranty period: 60 months after the date of delivery

You can fill out the integrated inquiry form below on this detail page to share your company profile. Our consultancy desk will review your query regarding steel round parameters and guide you on how to coordinate efficiently with the procurement team of North central railway NCR

Tender18 provides end-to-end professional bidding support and documentation advisory for tender for annealed, peeled, ground, straightened and 100% magna flux crack, annealed, peeled, ground, straightened and 100% magna flux crack tested spring steel round rods s ize 21.7 mm diameter x 1615 mm long. material grade 52cr4mo2v according to is-3195- 1992 (reaffirmed 2022 or l atest). the technical specification of the ss round rods shall governed by rdso specification no. wd-01-hls-94 rev. 05 of dec-2024 or latest for chemical composition to manufacturing of bars to final packing and transportation. in ad dition to above the following should be ensured by supplier: i) dimensional tolerance in diameter shall be + 0.1mm/- 0.0 mm and in length shall be within +10.0 mm/-0.0 mm. ii)corrosion protection: as per clause 6.3.1 & 6.3.2 of rds o spec. rdso/2017/cg-01 (rev.03) of jan; 2025. the bars/rods shall be coated with lacquer, cellulose, pigmented, fi nishing, glossy to is: 5691-1970 (latest) to a dft of corrosion protection layer shall be 3-5 microns. iii) packing and t ransportation: 1.1 after the application coating is dried up, bio degradable material shall be used for packing. if any plastic material is used for packing, necessary government guidelines should be followed. to avoid metal to metal c ontact spiral rings shall be provided on each bars/rods. 1.2 all other packing condition shall be as per rdso spec. r dso/2017/cg-01 (rev.03) of jan-2025. in addition to above all necessary test certificate as per clause 9.2.1 has to b e submitted by supplier also any other relevant para of the rdso spec. no. rdso/2017/cg-01(rev. 03), jan.25 shoul d be ensured by supplier. - warranty period: 60 months after the date of delivery . Our senior analysts help you decode the complete project guidelines, manage accurate costing sheets, and complete error-free submissions on the official platform used by North central railway NCR.

Most online bids face rejection during the initial evaluation round due to avoidable errors like uploading blurred document scans, submitting expired DSCs, or missing critical experience papers required for tender for annealed, peeled, ground, straightened and 100% magna flux crack, annealed, peeled, ground, straightened and 100% magna flux crack tested spring steel round rods s ize 21.7 mm diameter x 1615 mm long. material grade 52cr4mo2v according to is-3195- 1992 (reaffirmed 2022 or l atest). the technical specification of the ss round rods shall governed by rdso specification no. wd-01-hls-94 rev. 05 of dec-2024 or latest for chemical composition to manufacturing of bars to final packing and transportation. in ad dition to above the following should be ensured by supplier: i) dimensional tolerance in diameter shall be + 0.1mm/- 0.0 mm and in length shall be within +10.0 mm/-0.0 mm. ii)corrosion protection: as per clause 6.3.1 & 6.3.2 of rds o spec. rdso/2017/cg-01 (rev.03) of jan; 2025. the bars/rods shall be coated with lacquer, cellulose, pigmented, fi nishing, glossy to is: 5691-1970 (latest) to a dft of corrosion protection layer shall be 3-5 microns. iii) packing and t ransportation: 1.1 after the application coating is dried up, bio degradable material shall be used for packing. if any plastic material is used for packing, necessary government guidelines should be followed. to avoid metal to metal c ontact spiral rings shall be provided on each bars/rods. 1.2 all other packing condition shall be as per rdso spec. r dso/2017/cg-01 (rev.03) of jan-2025. in addition to above all necessary test certificate as per clause 9.2.1 has to b e submitted by supplier also any other relevant para of the rdso spec. no. rdso/2017/cg-01(rev. 03), jan.25 shoul d be ensured by supplier. - warranty period: 60 months after the date of delivery in Uttar pradesh.

Eligibility for outstation bidders depends entirely on the terms set inside the document for tender for annealed, peeled, ground, straightened and 100% magna flux crack, annealed, peeled, ground, straightened and 100% magna flux crack tested spring steel round rods s ize 21.7 mm diameter x 1615 mm long. material grade 52cr4mo2v according to is-3195- 1992 (reaffirmed 2022 or l atest). the technical specification of the ss round rods shall governed by rdso specification no. wd-01-hls-94 rev. 05 of dec-2024 or latest for chemical composition to manufacturing of bars to final packing and transportation. in ad dition to above the following should be ensured by supplier: i) dimensional tolerance in diameter shall be + 0.1mm/- 0.0 mm and in length shall be within +10.0 mm/-0.0 mm. ii)corrosion protection: as per clause 6.3.1 & 6.3.2 of rds o spec. rdso/2017/cg-01 (rev.03) of jan; 2025. the bars/rods shall be coated with lacquer, cellulose, pigmented, fi nishing, glossy to is: 5691-1970 (latest) to a dft of corrosion protection layer shall be 3-5 microns. iii) packing and t ransportation: 1.1 after the application coating is dried up, bio degradable material shall be used for packing. if any plastic material is used for packing, necessary government guidelines should be followed. to avoid metal to metal c ontact spiral rings shall be provided on each bars/rods. 1.2 all other packing condition shall be as per rdso spec. r dso/2017/cg-01 (rev.03) of jan-2025. in addition to above all necessary test certificate as per clause 9.2.1 has to b e submitted by supplier also any other relevant para of the rdso spec. no. rdso/2017/cg-01(rev. 03), jan.25 shoul d be ensured by supplier. - warranty period: 60 months after the date of delivery. While many public sector projects allow national competitive bidding, certain localized works require local offices or specific registration metrics in Jhansi.

If this procurement is routed through the central marketplace, an active GeM Seller ID is mandatory to supply steel round items. Tender18 offers complete assistance for brand cataloging, profile creation, and vendor assessment required officially by North central railway NCR

To register an eligible bid for these steel round contracts, companies must prepare their core compliance documents. Vendors operating across Uttar pradesh must ensure they possess a valid GST registration, permanent account number (PAN), and active Class-3 Digital Signature Certificates.

This public procurement cycle is specifically looking for qualified vendors and suppliers who can provide high-quality steel round solutions. The operational execution, delivery, and deployment of these materials must be managed locally within the Jhansi region.

The estimated project cost and budget thresholds can be reviewed directly inside the tender document. Bidders can analyze these qualification files to check if their firm meets the financial capability criteria specified for tender for annealed, peeled, ground, straightened and 100% magna flux crack, annealed, peeled, ground, straightened and 100% magna flux crack tested spring steel round rods s ize 21.7 mm diameter x 1615 mm long. material grade 52cr4mo2v according to is-3195- 1992 (reaffirmed 2022 or l atest). the technical specification of the ss round rods shall governed by rdso specification no. wd-01-hls-94 rev. 05 of dec-2024 or latest for chemical composition to manufacturing of bars to final packing and transportation. in ad dition to above the following should be ensured by supplier: i) dimensional tolerance in diameter shall be + 0.1mm/- 0.0 mm and in length shall be within +10.0 mm/-0.0 mm. ii)corrosion protection: as per clause 6.3.1 & 6.3.2 of rds o spec. rdso/2017/cg-01 (rev.03) of jan; 2025. the bars/rods shall be coated with lacquer, cellulose, pigmented, fi nishing, glossy to is: 5691-1970 (latest) to a dft of corrosion protection layer shall be 3-5 microns. iii) packing and t ransportation: 1.1 after the application coating is dried up, bio degradable material shall be used for packing. if any plastic material is used for packing, necessary government guidelines should be followed. to avoid metal to metal c ontact spiral rings shall be provided on each bars/rods. 1.2 all other packing condition shall be as per rdso spec. r dso/2017/cg-01 (rev.03) of jan-2025. in addition to above all necessary test certificate as per clause 9.2.1 has to b e submitted by supplier also any other relevant para of the rdso spec. no. rdso/2017/cg-01(rev. 03), jan.25 shoul d be ensured by supplier. - warranty period: 60 months after the date of delivery by North central railway NCR

You can download the commercial Bill of Quantities (BOQ) spreadsheet directly using the secure link provided on this page. The BOQ file contains the item descriptions and rate filling forms officially validated for tender for annealed, peeled, ground, straightened and 100% magna flux crack, annealed, peeled, ground, straightened and 100% magna flux crack tested spring steel round rods s ize 21.7 mm diameter x 1615 mm long. material grade 52cr4mo2v according to is-3195- 1992 (reaffirmed 2022 or l atest). the technical specification of the ss round rods shall governed by rdso specification no. wd-01-hls-94 rev. 05 of dec-2024 or latest for chemical composition to manufacturing of bars to final packing and transportation. in ad dition to above the following should be ensured by supplier: i) dimensional tolerance in diameter shall be + 0.1mm/- 0.0 mm and in length shall be within +10.0 mm/-0.0 mm. ii)corrosion protection: as per clause 6.3.1 & 6.3.2 of rds o spec. rdso/2017/cg-01 (rev.03) of jan; 2025. the bars/rods shall be coated with lacquer, cellulose, pigmented, fi nishing, glossy to is: 5691-1970 (latest) to a dft of corrosion protection layer shall be 3-5 microns. iii) packing and t ransportation: 1.1 after the application coating is dried up, bio degradable material shall be used for packing. if any plastic material is used for packing, necessary government guidelines should be followed. to avoid metal to metal c ontact spiral rings shall be provided on each bars/rods. 1.2 all other packing condition shall be as per rdso spec. r dso/2017/cg-01 (rev.03) of jan-2025. in addition to above all necessary test certificate as per clause 9.2.1 has to b e submitted by supplier also any other relevant para of the rdso spec. no. rdso/2017/cg-01(rev. 03), jan.25 shoul d be ensured by supplier. - warranty period: 60 months after the date of delivery within the Uttar pradesh jurisdiction

The official timeline and deadline details for tender for annealed, peeled, ground, straightened and 100% magna flux crack, annealed, peeled, ground, straightened and 100% magna flux crack tested spring steel round rods s ize 21.7 mm diameter x 1615 mm long. material grade 52cr4mo2v according to is-3195- 1992 (reaffirmed 2022 or l atest). the technical specification of the ss round rods shall governed by rdso specification no. wd-01-hls-94 rev. 05 of dec-2024 or latest for chemical composition to manufacturing of bars to final packing and transportation. in ad dition to above the following should be ensured by supplier: i) dimensional tolerance in diameter shall be + 0.1mm/- 0.0 mm and in length shall be within +10.0 mm/-0.0 mm. ii)corrosion protection: as per clause 6.3.1 & 6.3.2 of rds o spec. rdso/2017/cg-01 (rev.03) of jan; 2025. the bars/rods shall be coated with lacquer, cellulose, pigmented, fi nishing, glossy to is: 5691-1970 (latest) to a dft of corrosion protection layer shall be 3-5 microns. iii) packing and t ransportation: 1.1 after the application coating is dried up, bio degradable material shall be used for packing. if any plastic material is used for packing, necessary government guidelines should be followed. to avoid metal to metal c ontact spiral rings shall be provided on each bars/rods. 1.2 all other packing condition shall be as per rdso spec. r dso/2017/cg-01 (rev.03) of jan-2025. in addition to above all necessary test certificate as per clause 9.2.1 has to b e submitted by supplier also any other relevant para of the rdso spec. no. rdso/2017/cg-01(rev. 03), jan.25 shoul d be ensured by supplier. - warranty period: 60 months after the date of delivery are available inside the detailed notification files. Bidders planning to target this contract in Jhansi should check the official portal schedule early to complete their online technical and financial submission well before the closing hours.