tender for safe carriage of 8.5 m long pcc , safe carriage of 11 m long pcc , safe carriage of 9 m long stp , safe carriage of 11 and 13 m long stp , safe carriage of line material , safe carriage of xlpe cable , safe carriage of 11 kv ct pt pole mounting , safe carriage of 10 and 16 kva tf , safe carriage of 25 and 63 kva tf , safe carriage of 100 kva tf , etection of 8.5 m long pcc single support , etection of 9 m long stp single support , etection of 11 and 13 m long stp single support , etection of 11 m long pcc single support , etection of 8.5 m long pcc double pole section pole , etection of 11 m long pcc double pole section pole , etection of 11 and 13 m long stp double pole with tpmo etc , laying sagging of dog conductor , laying sagging of acsr weasel conductor , laying sagging of lt xlpe cable , laying sagging of 11 kv xlpe cable , laying sagging of ab cable , fixing of stay rod , fixing of 3 phase distribution box , erection of 11 kv ct pt pole mounting unit , installation of 11 kv pilfer metering cubical , providing and fixing of suspension clamp , providing and fixing of nut bolts off size , providing and fixing of lt shackle insulator , providing and fixing of dead end clamp , providing and fixing of stone pad , providing and fixing of danger board , providing and fixing of barbed wire , providing and fixing of number plate , fixing of joint kit outdoor , fixing of joint kit indoor , mounting of 10 and 16 kva tf , mounting of 25 and 63 kva tf , mounting of 100 kva tf , earthing of pcc pole stp dt , new guarding of ht lines with gi wire , carriage of acsr dog weseal conductor scrap , carriage of line material scrap , carriage of st pole scrap, erection of electricity lines under deposit head in the area of eudd etah, safe carriage of 8.5 mtr. long pcc pole from store center etah 33/11 kv s/s to direct pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 11 mtr. long pcc pole from store center etah 33/11 kv s/s to direct pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 9 mtr. long stp pole from store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 10 km. including loading & unloading at both ends., safe carriage of 11/13 mtr. long stp pole from store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 10 km. including loading & unloading at both ends., safe carriage of line material from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of xlpe cable 3x70/3x120 sq mm from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 11 kv ct/pt pole mounting unit/11 kv metering cubical from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 10/16 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 25/63 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 100 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., erection of 8.5 mtr long pcc pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 9 mtr long st pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11/13 mtr long st pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11 mtr long pcc pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 8.5 mtr. long pcc poles as d/p or section pole including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11 mtr. long pcc poles as d/p or section pole including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11/13 mtr. long st poles as d/p including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., laying sagging, stringing, binding and jumpering etc of dog conductor as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of acsr weasel conductor as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of lt xlpe cable 3.5x70/3.5x150 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of 11 kv xlpe cable size 3x70 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of 11 kv xlpe cable size 3x120 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of ab cable of size 3x50 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of ab cable of size 1x25+1x16 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., fixing of stay rod with nozzling etc complete., fixing of 3 phase distribution box with clamp, erection of 11 kv ct/pt pole mounting unit with connection, installation of 11 kv pilfer metering cubical 5/5a, providing and fixing of suspension clamp for pcc/st pole, providing and fixing of nut bolts off size, providing and fixing of lt shackle insulator/lt pin clamp/double pole clamp for pcc/st pole, providing and fixing of dead end clamp/piercing connector for ab cable, providing and fixing of stone pad 300x300x75 mm, providing and fixing of danger board with clamp, providing and fixing of barbed wire as per norrms, providing and fixing of number plate as per norrms, fixing of outdoor jointing kit suitable for 11 kv 3x120 sq mm xlpe cable, fixing of indoor jointing kit suitable for 11 kv 3x120 sq mm xlpe cable, fixing of outdoor jointing kit suitable for 11 kv 3x70 sq mm xlpe cable, fixing of indoor jointing kit suitable for 11 kv 3x70 sq mm xlpe cable, mounting of 10/16 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., mounting of 25/63 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., mounting of 100 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., earthing of pcc pole/stp/dt with ms earth rod as per respo norms/specification., new guarding of ht lines with gi wire as per respo norms/specification., carriage of acsr dog/weseal conductor (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking., carriage of line material (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking., carriage of st pole (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking.

Latest Tender Detail from uttar pradesh power corporation limited UPPCL for the tender for safe carriage of 8.5 m long pcc , safe carriage of 11 m long pcc , safe carriage of 9 m long stp , safe carriage of 11 and 13 m long stp , safe carriage of line material , safe carriage of xlpe cable , safe carriage of 11 kv ct pt pole mounting , safe carriage of 10 and 16 kva tf , safe carriage of 25 and 63 kva tf , safe carriage of 100 kva tf , etection of 8.5 m long pcc single support , etection of 9 m long stp single support , etection of 11 and 13 m long stp single support , etection of 11 m long pcc single support , etection of 8.5 m long pcc double pole section pole , etection of 11 m long pcc double pole section pole , etection of 11 and 13 m long stp double pole with tpmo etc , laying sagging of dog conductor , laying sagging of acsr weasel conductor , laying sagging of lt xlpe cable , laying sagging of 11 kv xlpe cable , laying sagging of ab cable , fixing of stay rod , fixing of 3 phase distribution box , erection of 11 kv ct pt pole mounting unit , installation of 11 kv pilfer metering cubical , providing and fixing of suspension clamp , providing and fixing of nut bolts off size , providing and fixing of lt shackle insulator , providing and fixing of dead end clamp , providing and fixing of stone pad , providing and fixing of danger board , providing and fixing of barbed wire , providing and fixing of number plate , fixing of joint kit outdoor , fixing of joint kit indoor , mounting of 10 and 16 kva tf , mounting of 25 and 63 kva tf , mounting of 100 kva tf , earthing of pcc pole stp dt , new guarding of ht lines with gi wire , carriage of acsr dog weseal conductor scrap , carriage of line material scrap , carriage of st pole scrap, erection of electricity lines under deposit head in the area of eudd etah, safe carriage of 8.5 mtr. long pcc pole from store center etah 33/11 kv s/s to direct pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 11 mtr. long pcc pole from store center etah 33/11 kv s/s to direct pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 9 mtr. long stp pole from store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 10 km. including loading & unloading at both ends., safe carriage of 11/13 mtr. long stp pole from store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 10 km. including loading & unloading at both ends., safe carriage of line material from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of xlpe cable 3x70/3x120 sq mm from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 11 kv ct/pt pole mounting unit/11 kv metering cubical from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 10/16 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 25/63 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 100 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., erection of 8.5 mtr long pcc pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 9 mtr long st pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11/13 mtr long st pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11 mtr long pcc pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 8.5 mtr. long pcc poles as d/p or section pole including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11 mtr. long pcc poles as d/p or section pole including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11/13 mtr. long st poles as d/p including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., laying sagging, stringing, binding and jumpering etc of dog conductor as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of acsr weasel conductor as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of lt xlpe cable 3.5x70/3.5x150 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of 11 kv xlpe cable size 3x70 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of 11 kv xlpe cable size 3x120 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of ab cable of size 3x50 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of ab cable of size 1x25+1x16 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., fixing of stay rod with nozzling etc complete., fixing of 3 phase distribution box with clamp, erection of 11 kv ct/pt pole mounting unit with connection, installation of 11 kv pilfer metering cubical 5/5a, providing and fixing of suspension clamp for pcc/st pole, providing and fixing of nut bolts off size, providing and fixing of lt shackle insulator/lt pin clamp/double pole clamp for pcc/st pole, providing and fixing of dead end clamp/piercing connector for ab cable, providing and fixing of stone pad 300x300x75 mm, providing and fixing of danger board with clamp, providing and fixing of barbed wire as per norrms, providing and fixing of number plate as per norrms, fixing of outdoor jointing kit suitable for 11 kv 3x120 sq mm xlpe cable, fixing of indoor jointing kit suitable for 11 kv 3x120 sq mm xlpe cable, fixing of outdoor jointing kit suitable for 11 kv 3x70 sq mm xlpe cable, fixing of indoor jointing kit suitable for 11 kv 3x70 sq mm xlpe cable, mounting of 10/16 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., mounting of 25/63 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., mounting of 100 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., earthing of pcc pole/stp/dt with ms earth rod as per respo norms/specification., new guarding of ht lines with gi wire as per respo norms/specification., carriage of acsr dog/weseal conductor (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking., carriage of line material (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking., carriage of st pole (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking. in etah, uttar pradesh,. Reference number 15861699. Don't miss out on this chance to be part of a significant project. Register for free today to access the complete tender details and download the necessary documents. Seize the opportunity with Tender 18!

T18 Ref No:15861699
Tender ID:GEM/2026/B/7664537
Tender Agency:uttar pradesh power corporation limited UPPCL
City:etah
State:uttar pradesh
Tender Related Keywords :pole mounting, xlpe cable, unloading, stacking, labour, clamp, bolts, wire, nut
Description :total quantity = 10276 ----- document required from seller = experience criteria,past performance,bidder turnover,oem annual turnover ----- evaluation method = total value wise evaluation
Tender Value:2000000
Tender EMD:20000
Tender Fee:Refer Document
Published Date:Jun 17, 2026
Due Date:Jul 02, 2026
Tender Opening Date:Jul 02, 2026
Tender DocumentsDownload Document
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tender Inquiry

This Government Tender has been Published  by Uttar pradesh power corporation limited UPPCL for work related to pole mounting,xlpe cable,unloading,stacking,labour,clamp,bolts,wire,nut in Etah, Uttar pradesh. The Tender work is tender for safe carriage of 8.5 m long pcc , safe carriage of 11 m long pcc , safe carriage of 9 m long stp , safe carriage of 11 and 13 m long stp , safe carriage of line material , safe carriage of xlpe cable , safe carriage of 11 kv ct pt pole mounting , safe carriage of 10 and 16 kva tf , safe carriage of 25 and 63 kva tf , safe carriage of 100 kva tf , etection of 8.5 m long pcc single support , etection of 9 m long stp single support , etection of 11 and 13 m long stp single support , etection of 11 m long pcc single support , etection of 8.5 m long pcc double pole section pole , etection of 11 m long pcc double pole section pole , etection of 11 and 13 m long stp double pole with tpmo etc , laying sagging of dog conductor , laying sagging of acsr weasel conductor , laying sagging of lt xlpe cable , laying sagging of 11 kv xlpe cable , laying sagging of ab cable , fixing of stay rod , fixing of 3 phase distribution box , erection of 11 kv ct pt pole mounting unit , installation of 11 kv pilfer metering cubical , providing and fixing of suspension clamp , providing and fixing of nut bolts off size , providing and fixing of lt shackle insulator , providing and fixing of dead end clamp , providing and fixing of stone pad , providing and fixing of danger board , providing and fixing of barbed wire , providing and fixing of number plate , fixing of joint kit outdoor , fixing of joint kit indoor , mounting of 10 and 16 kva tf , mounting of 25 and 63 kva tf , mounting of 100 kva tf , earthing of pcc pole stp dt , new guarding of ht lines with gi wire , carriage of acsr dog weseal conductor scrap , carriage of line material scrap , carriage of st pole scrap, erection of electricity lines under deposit head in the area of eudd etah, safe carriage of 8.5 mtr. long pcc pole from store center etah 33/11 kv s/s to direct pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 11 mtr. long pcc pole from store center etah 33/11 kv s/s to direct pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 9 mtr. long stp pole from store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 10 km. including loading & unloading at both ends., safe carriage of 11/13 mtr. long stp pole from store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 10 km. including loading & unloading at both ends., safe carriage of line material from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of xlpe cable 3x70/3x120 sq mm from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 11 kv ct/pt pole mounting unit/11 kv metering cubical from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 10/16 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 25/63 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 100 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., erection of 8.5 mtr long pcc pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 9 mtr long st pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11/13 mtr long st pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11 mtr long pcc pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 8.5 mtr. long pcc poles as d/p or section pole including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11 mtr. long pcc poles as d/p or section pole including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11/13 mtr. long st poles as d/p including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., laying sagging, stringing, binding and jumpering etc of dog conductor as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of acsr weasel conductor as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of lt xlpe cable 3.5x70/3.5x150 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of 11 kv xlpe cable size 3x70 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of 11 kv xlpe cable size 3x120 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of ab cable of size 3x50 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of ab cable of size 1x25+1x16 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., fixing of stay rod with nozzling etc complete., fixing of 3 phase distribution box with clamp, erection of 11 kv ct/pt pole mounting unit with connection, installation of 11 kv pilfer metering cubical 5/5a, providing and fixing of suspension clamp for pcc/st pole, providing and fixing of nut bolts off size, providing and fixing of lt shackle insulator/lt pin clamp/double pole clamp for pcc/st pole, providing and fixing of dead end clamp/piercing connector for ab cable, providing and fixing of stone pad 300x300x75 mm, providing and fixing of danger board with clamp, providing and fixing of barbed wire as per norrms, providing and fixing of number plate as per norrms, fixing of outdoor jointing kit suitable for 11 kv 3x120 sq mm xlpe cable, fixing of indoor jointing kit suitable for 11 kv 3x120 sq mm xlpe cable, fixing of outdoor jointing kit suitable for 11 kv 3x70 sq mm xlpe cable, fixing of indoor jointing kit suitable for 11 kv 3x70 sq mm xlpe cable, mounting of 10/16 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., mounting of 25/63 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., mounting of 100 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., earthing of pcc pole/stp/dt with ms earth rod as per respo norms/specification., new guarding of ht lines with gi wire as per respo norms/specification., carriage of acsr dog/weseal conductor (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking., carriage of line material (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking., carriage of st pole (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking.. Tender18 Provide this type Government Tender Information on daily basis.


This tender invites eligible contractors, suppliers, manufacturers, consultants, Startups, Msmes, traders and service providers to submit bids for the specified project, supply, service, or work requirement.


Before applying, interested bidders should review the tender scope, eligibility criteria, estimated contract value, important dates, technical requirements, reqired docuent list for bidder and bid submission instructions as per provided in the official tender documents. 


This Verified Information Provide By Tender18 in this page so Bidder Can Easiy  Understanding tender  requirements and bidders can prepare a compliant and competitive tender proposal.

To participate in the tender for safe carriage of 8.5 m long pcc , safe carriage of 11 m long pcc , safe carriage of 9 m long stp , safe carriage of 11 and 13 m long stp , safe carriage of line material , safe carriage of xlpe cable , safe carriage of 11 kv ct pt pole mounting , safe carriage of 10 and 16 kva tf , safe carriage of 25 and 63 kva tf , safe carriage of 100 kva tf , etection of 8.5 m long pcc single support , etection of 9 m long stp single support , etection of 11 and 13 m long stp single support , etection of 11 m long pcc single support , etection of 8.5 m long pcc double pole section pole , etection of 11 m long pcc double pole section pole , etection of 11 and 13 m long stp double pole with tpmo etc , laying sagging of dog conductor , laying sagging of acsr weasel conductor , laying sagging of lt xlpe cable , laying sagging of 11 kv xlpe cable , laying sagging of ab cable , fixing of stay rod , fixing of 3 phase distribution box , erection of 11 kv ct pt pole mounting unit , installation of 11 kv pilfer metering cubical , providing and fixing of suspension clamp , providing and fixing of nut bolts off size , providing and fixing of lt shackle insulator , providing and fixing of dead end clamp , providing and fixing of stone pad , providing and fixing of danger board , providing and fixing of barbed wire , providing and fixing of number plate , fixing of joint kit outdoor , fixing of joint kit indoor , mounting of 10 and 16 kva tf , mounting of 25 and 63 kva tf , mounting of 100 kva tf , earthing of pcc pole stp dt , new guarding of ht lines with gi wire , carriage of acsr dog weseal conductor scrap , carriage of line material scrap , carriage of st pole scrap, erection of electricity lines under deposit head in the area of eudd etah, safe carriage of 8.5 mtr. long pcc pole from store center etah 33/11 kv s/s to direct pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 11 mtr. long pcc pole from store center etah 33/11 kv s/s to direct pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 9 mtr. long stp pole from store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 10 km. including loading & unloading at both ends., safe carriage of 11/13 mtr. long stp pole from store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 10 km. including loading & unloading at both ends., safe carriage of line material from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of xlpe cable 3x70/3x120 sq mm from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 11 kv ct/pt pole mounting unit/11 kv metering cubical from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 10/16 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 25/63 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 100 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., erection of 8.5 mtr long pcc pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 9 mtr long st pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11/13 mtr long st pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11 mtr long pcc pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 8.5 mtr. long pcc poles as d/p or section pole including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11 mtr. long pcc poles as d/p or section pole including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11/13 mtr. long st poles as d/p including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., laying sagging, stringing, binding and jumpering etc of dog conductor as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of acsr weasel conductor as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of lt xlpe cable 3.5x70/3.5x150 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of 11 kv xlpe cable size 3x70 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of 11 kv xlpe cable size 3x120 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of ab cable of size 3x50 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of ab cable of size 1x25+1x16 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., fixing of stay rod with nozzling etc complete., fixing of 3 phase distribution box with clamp, erection of 11 kv ct/pt pole mounting unit with connection, installation of 11 kv pilfer metering cubical 5/5a, providing and fixing of suspension clamp for pcc/st pole, providing and fixing of nut bolts off size, providing and fixing of lt shackle insulator/lt pin clamp/double pole clamp for pcc/st pole, providing and fixing of dead end clamp/piercing connector for ab cable, providing and fixing of stone pad 300x300x75 mm, providing and fixing of danger board with clamp, providing and fixing of barbed wire as per norrms, providing and fixing of number plate as per norrms, fixing of outdoor jointing kit suitable for 11 kv 3x120 sq mm xlpe cable, fixing of indoor jointing kit suitable for 11 kv 3x120 sq mm xlpe cable, fixing of outdoor jointing kit suitable for 11 kv 3x70 sq mm xlpe cable, fixing of indoor jointing kit suitable for 11 kv 3x70 sq mm xlpe cable, mounting of 10/16 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., mounting of 25/63 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., mounting of 100 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., earthing of pcc pole/stp/dt with ms earth rod as per respo norms/specification., new guarding of ht lines with gi wire as per respo norms/specification., carriage of acsr dog/weseal conductor (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking., carriage of line material (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking., carriage of st pole (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking., bidders should first download and review all available tender documents. These documents generally include the Notice Inviting Tender (NIT), Bill of Quantities (BOQ), technical specifications, eligibility criteria, scope of work, and bid submission instructions.


Tender Governemnt Authorities like Uttar pradesh power corporation limited UPPCL usually publish these documents on their official eProcurement portals, departmental tender portals, the GeM Tender Portal, or other government procurement platforms or on newspapre. Finding and accessing the correct tender documents across multiple portals can sometimes be time-consuming for bidders. 


To make the process easier, Tender18 provides quick access to the available tender documents related to this Etah , Uttar pradesh tender on a single page. Businesses involved in pole mounting,xlpe cable,unloading,stacking,labour,clamp,bolts,wire,nut related products, services, or works can conveniently download the relevant documents and review the tender requirements without spending time searching across different procurement portals.

The tender for safe carriage of 8.5 m long pcc , safe carriage of 11 m long pcc , safe carriage of 9 m long stp , safe carriage of 11 and 13 m long stp , safe carriage of line material , safe carriage of xlpe cable , safe carriage of 11 kv ct pt pole mounting , safe carriage of 10 and 16 kva tf , safe carriage of 25 and 63 kva tf , safe carriage of 100 kva tf , etection of 8.5 m long pcc single support , etection of 9 m long stp single support , etection of 11 and 13 m long stp single support , etection of 11 m long pcc single support , etection of 8.5 m long pcc double pole section pole , etection of 11 m long pcc double pole section pole , etection of 11 and 13 m long stp double pole with tpmo etc , laying sagging of dog conductor , laying sagging of acsr weasel conductor , laying sagging of lt xlpe cable , laying sagging of 11 kv xlpe cable , laying sagging of ab cable , fixing of stay rod , fixing of 3 phase distribution box , erection of 11 kv ct pt pole mounting unit , installation of 11 kv pilfer metering cubical , providing and fixing of suspension clamp , providing and fixing of nut bolts off size , providing and fixing of lt shackle insulator , providing and fixing of dead end clamp , providing and fixing of stone pad , providing and fixing of danger board , providing and fixing of barbed wire , providing and fixing of number plate , fixing of joint kit outdoor , fixing of joint kit indoor , mounting of 10 and 16 kva tf , mounting of 25 and 63 kva tf , mounting of 100 kva tf , earthing of pcc pole stp dt , new guarding of ht lines with gi wire , carriage of acsr dog weseal conductor scrap , carriage of line material scrap , carriage of st pole scrap, erection of electricity lines under deposit head in the area of eudd etah, safe carriage of 8.5 mtr. long pcc pole from store center etah 33/11 kv s/s to direct pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 11 mtr. long pcc pole from store center etah 33/11 kv s/s to direct pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 9 mtr. long stp pole from store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 10 km. including loading & unloading at both ends., safe carriage of 11/13 mtr. long stp pole from store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 10 km. including loading & unloading at both ends., safe carriage of line material from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of xlpe cable 3x70/3x120 sq mm from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 11 kv ct/pt pole mounting unit/11 kv metering cubical from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 10/16 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 25/63 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 100 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., erection of 8.5 mtr long pcc pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 9 mtr long st pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11/13 mtr long st pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11 mtr long pcc pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 8.5 mtr. long pcc poles as d/p or section pole including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11 mtr. long pcc poles as d/p or section pole including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11/13 mtr. long st poles as d/p including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., laying sagging, stringing, binding and jumpering etc of dog conductor as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of acsr weasel conductor as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of lt xlpe cable 3.5x70/3.5x150 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of 11 kv xlpe cable size 3x70 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of 11 kv xlpe cable size 3x120 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of ab cable of size 3x50 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of ab cable of size 1x25+1x16 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., fixing of stay rod with nozzling etc complete., fixing of 3 phase distribution box with clamp, erection of 11 kv ct/pt pole mounting unit with connection, installation of 11 kv pilfer metering cubical 5/5a, providing and fixing of suspension clamp for pcc/st pole, providing and fixing of nut bolts off size, providing and fixing of lt shackle insulator/lt pin clamp/double pole clamp for pcc/st pole, providing and fixing of dead end clamp/piercing connector for ab cable, providing and fixing of stone pad 300x300x75 mm, providing and fixing of danger board with clamp, providing and fixing of barbed wire as per norrms, providing and fixing of number plate as per norrms, fixing of outdoor jointing kit suitable for 11 kv 3x120 sq mm xlpe cable, fixing of indoor jointing kit suitable for 11 kv 3x120 sq mm xlpe cable, fixing of outdoor jointing kit suitable for 11 kv 3x70 sq mm xlpe cable, fixing of indoor jointing kit suitable for 11 kv 3x70 sq mm xlpe cable, mounting of 10/16 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., mounting of 25/63 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., mounting of 100 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., earthing of pcc pole/stp/dt with ms earth rod as per respo norms/specification., new guarding of ht lines with gi wire as per respo norms/specification., carriage of acsr dog/weseal conductor (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking., carriage of line material (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking., carriage of st pole (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking. from Etah, Uttar pradesh may be relevant for contractors, suppliers, vendors, manufacturers, consultants, service providers, startups, MSMEs, and other organizations involved in pole mounting,xlpe cable,unloading,stacking,labour,clamp,bolts,wire,nut related products, services, or works. However, eligibility to participate depends on the qualification criteria specified by Uttar pradesh power corporation limited UPPCL in the official tender documents.

Before submitting a bid, interested applicants should carefully review the eligibility conditions, technical requirements, financial criteria, work experience requirements, annual turnover conditions, registrations, certifications, and any other supporting documents required by the tendering authority. The detailed qualification requirements and bidder eligibility criteria are available in the tender notice and related documents provided on this page. 

Ensuring compliance with all eligibility and qualification requirements before bid submission can help bidders avoid disqualification and improve their chances of successful participation in the tender process.

Tende18 provides comprehensive tender bidding services, including a complete tender summary along with a detailed analysis of the Tender Qualification and Eligibility Criteria.

Interested in participating in the tender for safe carriage of 8.5 m long pcc , safe carriage of 11 m long pcc , safe carriage of 9 m long stp , safe carriage of 11 and 13 m long stp , safe carriage of line material , safe carriage of xlpe cable , safe carriage of 11 kv ct pt pole mounting , safe carriage of 10 and 16 kva tf , safe carriage of 25 and 63 kva tf , safe carriage of 100 kva tf , etection of 8.5 m long pcc single support , etection of 9 m long stp single support , etection of 11 and 13 m long stp single support , etection of 11 m long pcc single support , etection of 8.5 m long pcc double pole section pole , etection of 11 m long pcc double pole section pole , etection of 11 and 13 m long stp double pole with tpmo etc , laying sagging of dog conductor , laying sagging of acsr weasel conductor , laying sagging of lt xlpe cable , laying sagging of 11 kv xlpe cable , laying sagging of ab cable , fixing of stay rod , fixing of 3 phase distribution box , erection of 11 kv ct pt pole mounting unit , installation of 11 kv pilfer metering cubical , providing and fixing of suspension clamp , providing and fixing of nut bolts off size , providing and fixing of lt shackle insulator , providing and fixing of dead end clamp , providing and fixing of stone pad , providing and fixing of danger board , providing and fixing of barbed wire , providing and fixing of number plate , fixing of joint kit outdoor , fixing of joint kit indoor , mounting of 10 and 16 kva tf , mounting of 25 and 63 kva tf , mounting of 100 kva tf , earthing of pcc pole stp dt , new guarding of ht lines with gi wire , carriage of acsr dog weseal conductor scrap , carriage of line material scrap , carriage of st pole scrap, erection of electricity lines under deposit head in the area of eudd etah, safe carriage of 8.5 mtr. long pcc pole from store center etah 33/11 kv s/s to direct pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 11 mtr. long pcc pole from store center etah 33/11 kv s/s to direct pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 9 mtr. long stp pole from store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 10 km. including loading & unloading at both ends., safe carriage of 11/13 mtr. long stp pole from store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 10 km. including loading & unloading at both ends., safe carriage of line material from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of xlpe cable 3x70/3x120 sq mm from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 11 kv ct/pt pole mounting unit/11 kv metering cubical from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 10/16 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 25/63 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 100 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., erection of 8.5 mtr long pcc pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 9 mtr long st pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11/13 mtr long st pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11 mtr long pcc pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 8.5 mtr. long pcc poles as d/p or section pole including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11 mtr. long pcc poles as d/p or section pole including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11/13 mtr. long st poles as d/p including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., laying sagging, stringing, binding and jumpering etc of dog conductor as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of acsr weasel conductor as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of lt xlpe cable 3.5x70/3.5x150 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of 11 kv xlpe cable size 3x70 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of 11 kv xlpe cable size 3x120 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of ab cable of size 3x50 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of ab cable of size 1x25+1x16 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., fixing of stay rod with nozzling etc complete., fixing of 3 phase distribution box with clamp, erection of 11 kv ct/pt pole mounting unit with connection, installation of 11 kv pilfer metering cubical 5/5a, providing and fixing of suspension clamp for pcc/st pole, providing and fixing of nut bolts off size, providing and fixing of lt shackle insulator/lt pin clamp/double pole clamp for pcc/st pole, providing and fixing of dead end clamp/piercing connector for ab cable, providing and fixing of stone pad 300x300x75 mm, providing and fixing of danger board with clamp, providing and fixing of barbed wire as per norrms, providing and fixing of number plate as per norrms, fixing of outdoor jointing kit suitable for 11 kv 3x120 sq mm xlpe cable, fixing of indoor jointing kit suitable for 11 kv 3x120 sq mm xlpe cable, fixing of outdoor jointing kit suitable for 11 kv 3x70 sq mm xlpe cable, fixing of indoor jointing kit suitable for 11 kv 3x70 sq mm xlpe cable, mounting of 10/16 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., mounting of 25/63 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., mounting of 100 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., earthing of pcc pole/stp/dt with ms earth rod as per respo norms/specification., new guarding of ht lines with gi wire as per respo norms/specification., carriage of acsr dog/weseal conductor (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking., carriage of line material (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking., carriage of st pole (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking. issued by Uttar pradesh power corporation limited UPPCL for pole mounting,xlpe cable,unloading,stacking,labour,clamp,bolts,wire,nut related work in Etah, Uttar pradesh? TENDER18 provides complete assistance to help businesses understand tender requirements, access tender documents, review eligibility criteria, qualification requirements, important dates, and bid submission guidelines associated with this tender.

Our Tender18 Expert Technical team can assist with vendor and GeM registration on the relevant departmental, eProcurement, GeM, or government tender portal, preparation of technical and financial bid documents, compliance with qualification criteria, document verification, and complete online tender submission support. Whether you are a contractor, supplier, manufacturer, consultant, startup, or MSME working in the field of pole mounting,xlpe cable,unloading,stacking,labour,clamp,bolts,wire,nut, Tender18 can help simplify the tender participation process and support you throughout every stage of bidding for this tender. so that tender18 is one the top leading tender consultant in Inda.

1.

Whom should I contact if I have further queries about the Tender scope?

You can fill out the integrated inquiry form below on this detail page to share your company profile. Our consultancy desk will review your query regarding pole mounting,xlpe cable,unloading,stacking,labour,clamp,bolts,wire,nut parameters and guide you on how to coordinate efficiently with the procurement team of Uttar pradesh power corporation limited UPPCL

2.

How can Tender18 assist my business in winning this government contract?

Tender18 provides end-to-end professional bidding support and documentation advisory for tender for safe carriage of 8.5 m long pcc , safe carriage of 11 m long pcc , safe carriage of 9 m long stp , safe carriage of 11 and 13 m long stp , safe carriage of line material , safe carriage of xlpe cable , safe carriage of 11 kv ct pt pole mounting , safe carriage of 10 and 16 kva tf , safe carriage of 25 and 63 kva tf , safe carriage of 100 kva tf , etection of 8.5 m long pcc single support , etection of 9 m long stp single support , etection of 11 and 13 m long stp single support , etection of 11 m long pcc single support , etection of 8.5 m long pcc double pole section pole , etection of 11 m long pcc double pole section pole , etection of 11 and 13 m long stp double pole with tpmo etc , laying sagging of dog conductor , laying sagging of acsr weasel conductor , laying sagging of lt xlpe cable , laying sagging of 11 kv xlpe cable , laying sagging of ab cable , fixing of stay rod , fixing of 3 phase distribution box , erection of 11 kv ct pt pole mounting unit , installation of 11 kv pilfer metering cubical , providing and fixing of suspension clamp , providing and fixing of nut bolts off size , providing and fixing of lt shackle insulator , providing and fixing of dead end clamp , providing and fixing of stone pad , providing and fixing of danger board , providing and fixing of barbed wire , providing and fixing of number plate , fixing of joint kit outdoor , fixing of joint kit indoor , mounting of 10 and 16 kva tf , mounting of 25 and 63 kva tf , mounting of 100 kva tf , earthing of pcc pole stp dt , new guarding of ht lines with gi wire , carriage of acsr dog weseal conductor scrap , carriage of line material scrap , carriage of st pole scrap, erection of electricity lines under deposit head in the area of eudd etah, safe carriage of 8.5 mtr. long pcc pole from store center etah 33/11 kv s/s to direct pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 11 mtr. long pcc pole from store center etah 33/11 kv s/s to direct pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 9 mtr. long stp pole from store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 10 km. including loading & unloading at both ends., safe carriage of 11/13 mtr. long stp pole from store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 10 km. including loading & unloading at both ends., safe carriage of line material from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of xlpe cable 3x70/3x120 sq mm from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 11 kv ct/pt pole mounting unit/11 kv metering cubical from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 10/16 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 25/63 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 100 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., erection of 8.5 mtr long pcc pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 9 mtr long st pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11/13 mtr long st pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11 mtr long pcc pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 8.5 mtr. long pcc poles as d/p or section pole including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11 mtr. long pcc poles as d/p or section pole including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11/13 mtr. long st poles as d/p including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., laying sagging, stringing, binding and jumpering etc of dog conductor as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of acsr weasel conductor as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of lt xlpe cable 3.5x70/3.5x150 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of 11 kv xlpe cable size 3x70 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of 11 kv xlpe cable size 3x120 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of ab cable of size 3x50 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of ab cable of size 1x25+1x16 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., fixing of stay rod with nozzling etc complete., fixing of 3 phase distribution box with clamp, erection of 11 kv ct/pt pole mounting unit with connection, installation of 11 kv pilfer metering cubical 5/5a, providing and fixing of suspension clamp for pcc/st pole, providing and fixing of nut bolts off size, providing and fixing of lt shackle insulator/lt pin clamp/double pole clamp for pcc/st pole, providing and fixing of dead end clamp/piercing connector for ab cable, providing and fixing of stone pad 300x300x75 mm, providing and fixing of danger board with clamp, providing and fixing of barbed wire as per norrms, providing and fixing of number plate as per norrms, fixing of outdoor jointing kit suitable for 11 kv 3x120 sq mm xlpe cable, fixing of indoor jointing kit suitable for 11 kv 3x120 sq mm xlpe cable, fixing of outdoor jointing kit suitable for 11 kv 3x70 sq mm xlpe cable, fixing of indoor jointing kit suitable for 11 kv 3x70 sq mm xlpe cable, mounting of 10/16 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., mounting of 25/63 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., mounting of 100 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., earthing of pcc pole/stp/dt with ms earth rod as per respo norms/specification., new guarding of ht lines with gi wire as per respo norms/specification., carriage of acsr dog/weseal conductor (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking., carriage of line material (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking., carriage of st pole (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking. . Our senior analysts help you decode the complete project guidelines, manage accurate costing sheets, and complete error-free submissions on the official platform used by Uttar pradesh power corporation limited UPPCL.

3.

What are the main reasons for a technical tender rejection?

Most online bids face rejection during the initial evaluation round due to avoidable errors like uploading blurred document scans, submitting expired DSCs, or missing critical experience papers required for tender for safe carriage of 8.5 m long pcc , safe carriage of 11 m long pcc , safe carriage of 9 m long stp , safe carriage of 11 and 13 m long stp , safe carriage of line material , safe carriage of xlpe cable , safe carriage of 11 kv ct pt pole mounting , safe carriage of 10 and 16 kva tf , safe carriage of 25 and 63 kva tf , safe carriage of 100 kva tf , etection of 8.5 m long pcc single support , etection of 9 m long stp single support , etection of 11 and 13 m long stp single support , etection of 11 m long pcc single support , etection of 8.5 m long pcc double pole section pole , etection of 11 m long pcc double pole section pole , etection of 11 and 13 m long stp double pole with tpmo etc , laying sagging of dog conductor , laying sagging of acsr weasel conductor , laying sagging of lt xlpe cable , laying sagging of 11 kv xlpe cable , laying sagging of ab cable , fixing of stay rod , fixing of 3 phase distribution box , erection of 11 kv ct pt pole mounting unit , installation of 11 kv pilfer metering cubical , providing and fixing of suspension clamp , providing and fixing of nut bolts off size , providing and fixing of lt shackle insulator , providing and fixing of dead end clamp , providing and fixing of stone pad , providing and fixing of danger board , providing and fixing of barbed wire , providing and fixing of number plate , fixing of joint kit outdoor , fixing of joint kit indoor , mounting of 10 and 16 kva tf , mounting of 25 and 63 kva tf , mounting of 100 kva tf , earthing of pcc pole stp dt , new guarding of ht lines with gi wire , carriage of acsr dog weseal conductor scrap , carriage of line material scrap , carriage of st pole scrap, erection of electricity lines under deposit head in the area of eudd etah, safe carriage of 8.5 mtr. long pcc pole from store center etah 33/11 kv s/s to direct pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 11 mtr. long pcc pole from store center etah 33/11 kv s/s to direct pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 9 mtr. long stp pole from store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 10 km. including loading & unloading at both ends., safe carriage of 11/13 mtr. long stp pole from store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 10 km. including loading & unloading at both ends., safe carriage of line material from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of xlpe cable 3x70/3x120 sq mm from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 11 kv ct/pt pole mounting unit/11 kv metering cubical from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 10/16 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 25/63 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 100 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., erection of 8.5 mtr long pcc pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 9 mtr long st pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11/13 mtr long st pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11 mtr long pcc pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 8.5 mtr. long pcc poles as d/p or section pole including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11 mtr. long pcc poles as d/p or section pole including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11/13 mtr. long st poles as d/p including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., laying sagging, stringing, binding and jumpering etc of dog conductor as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of acsr weasel conductor as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of lt xlpe cable 3.5x70/3.5x150 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of 11 kv xlpe cable size 3x70 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of 11 kv xlpe cable size 3x120 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of ab cable of size 3x50 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of ab cable of size 1x25+1x16 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., fixing of stay rod with nozzling etc complete., fixing of 3 phase distribution box with clamp, erection of 11 kv ct/pt pole mounting unit with connection, installation of 11 kv pilfer metering cubical 5/5a, providing and fixing of suspension clamp for pcc/st pole, providing and fixing of nut bolts off size, providing and fixing of lt shackle insulator/lt pin clamp/double pole clamp for pcc/st pole, providing and fixing of dead end clamp/piercing connector for ab cable, providing and fixing of stone pad 300x300x75 mm, providing and fixing of danger board with clamp, providing and fixing of barbed wire as per norrms, providing and fixing of number plate as per norrms, fixing of outdoor jointing kit suitable for 11 kv 3x120 sq mm xlpe cable, fixing of indoor jointing kit suitable for 11 kv 3x120 sq mm xlpe cable, fixing of outdoor jointing kit suitable for 11 kv 3x70 sq mm xlpe cable, fixing of indoor jointing kit suitable for 11 kv 3x70 sq mm xlpe cable, mounting of 10/16 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., mounting of 25/63 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., mounting of 100 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., earthing of pcc pole/stp/dt with ms earth rod as per respo norms/specification., new guarding of ht lines with gi wire as per respo norms/specification., carriage of acsr dog/weseal conductor (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking., carriage of line material (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking., carriage of st pole (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking. in Uttar pradesh.

4.

Can contractors located outside the local region participate in this bid?

Eligibility for outstation bidders depends entirely on the terms set inside the document for tender for safe carriage of 8.5 m long pcc , safe carriage of 11 m long pcc , safe carriage of 9 m long stp , safe carriage of 11 and 13 m long stp , safe carriage of line material , safe carriage of xlpe cable , safe carriage of 11 kv ct pt pole mounting , safe carriage of 10 and 16 kva tf , safe carriage of 25 and 63 kva tf , safe carriage of 100 kva tf , etection of 8.5 m long pcc single support , etection of 9 m long stp single support , etection of 11 and 13 m long stp single support , etection of 11 m long pcc single support , etection of 8.5 m long pcc double pole section pole , etection of 11 m long pcc double pole section pole , etection of 11 and 13 m long stp double pole with tpmo etc , laying sagging of dog conductor , laying sagging of acsr weasel conductor , laying sagging of lt xlpe cable , laying sagging of 11 kv xlpe cable , laying sagging of ab cable , fixing of stay rod , fixing of 3 phase distribution box , erection of 11 kv ct pt pole mounting unit , installation of 11 kv pilfer metering cubical , providing and fixing of suspension clamp , providing and fixing of nut bolts off size , providing and fixing of lt shackle insulator , providing and fixing of dead end clamp , providing and fixing of stone pad , providing and fixing of danger board , providing and fixing of barbed wire , providing and fixing of number plate , fixing of joint kit outdoor , fixing of joint kit indoor , mounting of 10 and 16 kva tf , mounting of 25 and 63 kva tf , mounting of 100 kva tf , earthing of pcc pole stp dt , new guarding of ht lines with gi wire , carriage of acsr dog weseal conductor scrap , carriage of line material scrap , carriage of st pole scrap, erection of electricity lines under deposit head in the area of eudd etah, safe carriage of 8.5 mtr. long pcc pole from store center etah 33/11 kv s/s to direct pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 11 mtr. long pcc pole from store center etah 33/11 kv s/s to direct pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 9 mtr. long stp pole from store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 10 km. including loading & unloading at both ends., safe carriage of 11/13 mtr. long stp pole from store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 10 km. including loading & unloading at both ends., safe carriage of line material from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of xlpe cable 3x70/3x120 sq mm from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 11 kv ct/pt pole mounting unit/11 kv metering cubical from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 10/16 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 25/63 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 100 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., erection of 8.5 mtr long pcc pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 9 mtr long st pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11/13 mtr long st pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11 mtr long pcc pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 8.5 mtr. long pcc poles as d/p or section pole including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11 mtr. long pcc poles as d/p or section pole including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11/13 mtr. long st poles as d/p including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., laying sagging, stringing, binding and jumpering etc of dog conductor as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of acsr weasel conductor as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of lt xlpe cable 3.5x70/3.5x150 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of 11 kv xlpe cable size 3x70 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of 11 kv xlpe cable size 3x120 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of ab cable of size 3x50 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of ab cable of size 1x25+1x16 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., fixing of stay rod with nozzling etc complete., fixing of 3 phase distribution box with clamp, erection of 11 kv ct/pt pole mounting unit with connection, installation of 11 kv pilfer metering cubical 5/5a, providing and fixing of suspension clamp for pcc/st pole, providing and fixing of nut bolts off size, providing and fixing of lt shackle insulator/lt pin clamp/double pole clamp for pcc/st pole, providing and fixing of dead end clamp/piercing connector for ab cable, providing and fixing of stone pad 300x300x75 mm, providing and fixing of danger board with clamp, providing and fixing of barbed wire as per norrms, providing and fixing of number plate as per norrms, fixing of outdoor jointing kit suitable for 11 kv 3x120 sq mm xlpe cable, fixing of indoor jointing kit suitable for 11 kv 3x120 sq mm xlpe cable, fixing of outdoor jointing kit suitable for 11 kv 3x70 sq mm xlpe cable, fixing of indoor jointing kit suitable for 11 kv 3x70 sq mm xlpe cable, mounting of 10/16 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., mounting of 25/63 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., mounting of 100 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., earthing of pcc pole/stp/dt with ms earth rod as per respo norms/specification., new guarding of ht lines with gi wire as per respo norms/specification., carriage of acsr dog/weseal conductor (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking., carriage of line material (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking., carriage of st pole (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking.. While many public sector projects allow national competitive bidding, certain localized works require local offices or specific registration metrics in Etah.

5.

Do I need an active GeM Portal registration to apply for this work?

If this procurement is routed through the central marketplace, an active GeM Seller ID is mandatory to supply pole mounting,xlpe cable,unloading,stacking,labour,clamp,bolts,wire,nut items. Tender18 offers complete assistance for brand cataloging, profile creation, and vendor assessment required officially by Uttar pradesh power corporation limited UPPCL

6.

What are the primary legal documents required to submit a valid bid?

To register an eligible bid for these pole mounting,xlpe cable,unloading,stacking,labour,clamp,bolts,wire,nut contracts, companies must prepare their core compliance documents. Vendors operating across Uttar pradesh must ensure they possess a valid GST registration, permanent account number (PAN), and active Class-3 Digital Signature Certificates.

7.

What products or services are required for this active work?

This public procurement cycle is specifically looking for qualified vendors and suppliers who can provide high-quality pole mounting,xlpe cable,unloading,stacking,labour,clamp,bolts,wire,nut solutions. The operational execution, delivery, and deployment of these materials must be managed locally within the Etah region.

8.

Where can I review the estimated cost or budget details for this Tender?

The estimated project cost and budget thresholds can be reviewed directly inside the tender document. Bidders can analyze these qualification files to check if their firm meets the financial capability criteria specified for tender for safe carriage of 8.5 m long pcc , safe carriage of 11 m long pcc , safe carriage of 9 m long stp , safe carriage of 11 and 13 m long stp , safe carriage of line material , safe carriage of xlpe cable , safe carriage of 11 kv ct pt pole mounting , safe carriage of 10 and 16 kva tf , safe carriage of 25 and 63 kva tf , safe carriage of 100 kva tf , etection of 8.5 m long pcc single support , etection of 9 m long stp single support , etection of 11 and 13 m long stp single support , etection of 11 m long pcc single support , etection of 8.5 m long pcc double pole section pole , etection of 11 m long pcc double pole section pole , etection of 11 and 13 m long stp double pole with tpmo etc , laying sagging of dog conductor , laying sagging of acsr weasel conductor , laying sagging of lt xlpe cable , laying sagging of 11 kv xlpe cable , laying sagging of ab cable , fixing of stay rod , fixing of 3 phase distribution box , erection of 11 kv ct pt pole mounting unit , installation of 11 kv pilfer metering cubical , providing and fixing of suspension clamp , providing and fixing of nut bolts off size , providing and fixing of lt shackle insulator , providing and fixing of dead end clamp , providing and fixing of stone pad , providing and fixing of danger board , providing and fixing of barbed wire , providing and fixing of number plate , fixing of joint kit outdoor , fixing of joint kit indoor , mounting of 10 and 16 kva tf , mounting of 25 and 63 kva tf , mounting of 100 kva tf , earthing of pcc pole stp dt , new guarding of ht lines with gi wire , carriage of acsr dog weseal conductor scrap , carriage of line material scrap , carriage of st pole scrap, erection of electricity lines under deposit head in the area of eudd etah, safe carriage of 8.5 mtr. long pcc pole from store center etah 33/11 kv s/s to direct pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 11 mtr. long pcc pole from store center etah 33/11 kv s/s to direct pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 9 mtr. long stp pole from store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 10 km. including loading & unloading at both ends., safe carriage of 11/13 mtr. long stp pole from store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 10 km. including loading & unloading at both ends., safe carriage of line material from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of xlpe cable 3x70/3x120 sq mm from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 11 kv ct/pt pole mounting unit/11 kv metering cubical from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 10/16 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 25/63 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 100 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., erection of 8.5 mtr long pcc pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 9 mtr long st pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11/13 mtr long st pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11 mtr long pcc pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 8.5 mtr. long pcc poles as d/p or section pole including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11 mtr. long pcc poles as d/p or section pole including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11/13 mtr. long st poles as d/p including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., laying sagging, stringing, binding and jumpering etc of dog conductor as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of acsr weasel conductor as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of lt xlpe cable 3.5x70/3.5x150 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of 11 kv xlpe cable size 3x70 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of 11 kv xlpe cable size 3x120 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of ab cable of size 3x50 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of ab cable of size 1x25+1x16 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., fixing of stay rod with nozzling etc complete., fixing of 3 phase distribution box with clamp, erection of 11 kv ct/pt pole mounting unit with connection, installation of 11 kv pilfer metering cubical 5/5a, providing and fixing of suspension clamp for pcc/st pole, providing and fixing of nut bolts off size, providing and fixing of lt shackle insulator/lt pin clamp/double pole clamp for pcc/st pole, providing and fixing of dead end clamp/piercing connector for ab cable, providing and fixing of stone pad 300x300x75 mm, providing and fixing of danger board with clamp, providing and fixing of barbed wire as per norrms, providing and fixing of number plate as per norrms, fixing of outdoor jointing kit suitable for 11 kv 3x120 sq mm xlpe cable, fixing of indoor jointing kit suitable for 11 kv 3x120 sq mm xlpe cable, fixing of outdoor jointing kit suitable for 11 kv 3x70 sq mm xlpe cable, fixing of indoor jointing kit suitable for 11 kv 3x70 sq mm xlpe cable, mounting of 10/16 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., mounting of 25/63 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., mounting of 100 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., earthing of pcc pole/stp/dt with ms earth rod as per respo norms/specification., new guarding of ht lines with gi wire as per respo norms/specification., carriage of acsr dog/weseal conductor (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking., carriage of line material (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking., carriage of st pole (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking. by Uttar pradesh power corporation limited UPPCL

9.

How can I download the official BOQ file for this opportunity?

You can download the commercial Bill of Quantities (BOQ) spreadsheet directly using the secure link provided on this page. The BOQ file contains the item descriptions and rate filling forms officially validated for tender for safe carriage of 8.5 m long pcc , safe carriage of 11 m long pcc , safe carriage of 9 m long stp , safe carriage of 11 and 13 m long stp , safe carriage of line material , safe carriage of xlpe cable , safe carriage of 11 kv ct pt pole mounting , safe carriage of 10 and 16 kva tf , safe carriage of 25 and 63 kva tf , safe carriage of 100 kva tf , etection of 8.5 m long pcc single support , etection of 9 m long stp single support , etection of 11 and 13 m long stp single support , etection of 11 m long pcc single support , etection of 8.5 m long pcc double pole section pole , etection of 11 m long pcc double pole section pole , etection of 11 and 13 m long stp double pole with tpmo etc , laying sagging of dog conductor , laying sagging of acsr weasel conductor , laying sagging of lt xlpe cable , laying sagging of 11 kv xlpe cable , laying sagging of ab cable , fixing of stay rod , fixing of 3 phase distribution box , erection of 11 kv ct pt pole mounting unit , installation of 11 kv pilfer metering cubical , providing and fixing of suspension clamp , providing and fixing of nut bolts off size , providing and fixing of lt shackle insulator , providing and fixing of dead end clamp , providing and fixing of stone pad , providing and fixing of danger board , providing and fixing of barbed wire , providing and fixing of number plate , fixing of joint kit outdoor , fixing of joint kit indoor , mounting of 10 and 16 kva tf , mounting of 25 and 63 kva tf , mounting of 100 kva tf , earthing of pcc pole stp dt , new guarding of ht lines with gi wire , carriage of acsr dog weseal conductor scrap , carriage of line material scrap , carriage of st pole scrap, erection of electricity lines under deposit head in the area of eudd etah, safe carriage of 8.5 mtr. long pcc pole from store center etah 33/11 kv s/s to direct pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 11 mtr. long pcc pole from store center etah 33/11 kv s/s to direct pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 9 mtr. long stp pole from store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 10 km. including loading & unloading at both ends., safe carriage of 11/13 mtr. long stp pole from store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 10 km. including loading & unloading at both ends., safe carriage of line material from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of xlpe cable 3x70/3x120 sq mm from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 11 kv ct/pt pole mounting unit/11 kv metering cubical from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 10/16 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 25/63 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 100 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., erection of 8.5 mtr long pcc pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 9 mtr long st pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11/13 mtr long st pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11 mtr long pcc pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 8.5 mtr. long pcc poles as d/p or section pole including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11 mtr. long pcc poles as d/p or section pole including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11/13 mtr. long st poles as d/p including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., laying sagging, stringing, binding and jumpering etc of dog conductor as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of acsr weasel conductor as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of lt xlpe cable 3.5x70/3.5x150 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of 11 kv xlpe cable size 3x70 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of 11 kv xlpe cable size 3x120 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of ab cable of size 3x50 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of ab cable of size 1x25+1x16 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., fixing of stay rod with nozzling etc complete., fixing of 3 phase distribution box with clamp, erection of 11 kv ct/pt pole mounting unit with connection, installation of 11 kv pilfer metering cubical 5/5a, providing and fixing of suspension clamp for pcc/st pole, providing and fixing of nut bolts off size, providing and fixing of lt shackle insulator/lt pin clamp/double pole clamp for pcc/st pole, providing and fixing of dead end clamp/piercing connector for ab cable, providing and fixing of stone pad 300x300x75 mm, providing and fixing of danger board with clamp, providing and fixing of barbed wire as per norrms, providing and fixing of number plate as per norrms, fixing of outdoor jointing kit suitable for 11 kv 3x120 sq mm xlpe cable, fixing of indoor jointing kit suitable for 11 kv 3x120 sq mm xlpe cable, fixing of outdoor jointing kit suitable for 11 kv 3x70 sq mm xlpe cable, fixing of indoor jointing kit suitable for 11 kv 3x70 sq mm xlpe cable, mounting of 10/16 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., mounting of 25/63 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., mounting of 100 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., earthing of pcc pole/stp/dt with ms earth rod as per respo norms/specification., new guarding of ht lines with gi wire as per respo norms/specification., carriage of acsr dog/weseal conductor (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking., carriage of line material (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking., carriage of st pole (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking. within the Uttar pradesh jurisdiction

10.

How can I find the submission closing date for this contract?

The official timeline and deadline details for tender for safe carriage of 8.5 m long pcc , safe carriage of 11 m long pcc , safe carriage of 9 m long stp , safe carriage of 11 and 13 m long stp , safe carriage of line material , safe carriage of xlpe cable , safe carriage of 11 kv ct pt pole mounting , safe carriage of 10 and 16 kva tf , safe carriage of 25 and 63 kva tf , safe carriage of 100 kva tf , etection of 8.5 m long pcc single support , etection of 9 m long stp single support , etection of 11 and 13 m long stp single support , etection of 11 m long pcc single support , etection of 8.5 m long pcc double pole section pole , etection of 11 m long pcc double pole section pole , etection of 11 and 13 m long stp double pole with tpmo etc , laying sagging of dog conductor , laying sagging of acsr weasel conductor , laying sagging of lt xlpe cable , laying sagging of 11 kv xlpe cable , laying sagging of ab cable , fixing of stay rod , fixing of 3 phase distribution box , erection of 11 kv ct pt pole mounting unit , installation of 11 kv pilfer metering cubical , providing and fixing of suspension clamp , providing and fixing of nut bolts off size , providing and fixing of lt shackle insulator , providing and fixing of dead end clamp , providing and fixing of stone pad , providing and fixing of danger board , providing and fixing of barbed wire , providing and fixing of number plate , fixing of joint kit outdoor , fixing of joint kit indoor , mounting of 10 and 16 kva tf , mounting of 25 and 63 kva tf , mounting of 100 kva tf , earthing of pcc pole stp dt , new guarding of ht lines with gi wire , carriage of acsr dog weseal conductor scrap , carriage of line material scrap , carriage of st pole scrap, erection of electricity lines under deposit head in the area of eudd etah, safe carriage of 8.5 mtr. long pcc pole from store center etah 33/11 kv s/s to direct pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 11 mtr. long pcc pole from store center etah 33/11 kv s/s to direct pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 9 mtr. long stp pole from store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 10 km. including loading & unloading at both ends., safe carriage of 11/13 mtr. long stp pole from store center etah/nearest 33/11 kv s/s to direct pit site in distance range 0 to 10 km. including loading & unloading at both ends., safe carriage of line material from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of xlpe cable 3x70/3x120 sq mm from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 11 kv ct/pt pole mounting unit/11 kv metering cubical from store center etah to pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 10/16 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 25/63 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., safe carriage of 100 kva form store center, etah je store to different pit site in distance range 0 to 10 km including loading & unloading at both ends., erection of 8.5 mtr long pcc pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 9 mtr long st pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11/13 mtr long st pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11 mtr long pcc pole as single support including fixing of ht/lt accessories etc complete, pole should be gruted properly as per dvvnl/respo norms., erection of 8.5 mtr. long pcc poles as d/p or section pole including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11 mtr. long pcc poles as d/p or section pole including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., erection of 11/13 mtr. long st poles as d/p including fixing of ht/lt accessories with tpmo etc. complete, pole should be gruted properly as per dvvnl/respo norms., laying sagging, stringing, binding and jumpering etc of dog conductor as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of acsr weasel conductor as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of lt xlpe cable 3.5x70/3.5x150 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of 11 kv xlpe cable size 3x70 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of 11 kv xlpe cable size 3x120 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of ab cable of size 3x50 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., laying sagging, stringing, binding and jumpering etc of ab cable of size 1x25+1x16 sq mm as per respo manual and as per direction of supervising engineer. it includes the cost of labour, t&p, carrier etc required for proper completion of work., fixing of stay rod with nozzling etc complete., fixing of 3 phase distribution box with clamp, erection of 11 kv ct/pt pole mounting unit with connection, installation of 11 kv pilfer metering cubical 5/5a, providing and fixing of suspension clamp for pcc/st pole, providing and fixing of nut bolts off size, providing and fixing of lt shackle insulator/lt pin clamp/double pole clamp for pcc/st pole, providing and fixing of dead end clamp/piercing connector for ab cable, providing and fixing of stone pad 300x300x75 mm, providing and fixing of danger board with clamp, providing and fixing of barbed wire as per norrms, providing and fixing of number plate as per norrms, fixing of outdoor jointing kit suitable for 11 kv 3x120 sq mm xlpe cable, fixing of indoor jointing kit suitable for 11 kv 3x120 sq mm xlpe cable, fixing of outdoor jointing kit suitable for 11 kv 3x70 sq mm xlpe cable, fixing of indoor jointing kit suitable for 11 kv 3x70 sq mm xlpe cable, mounting of 10/16 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., mounting of 25/63 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., mounting of 100 kva tf at double/single pole of pcc/st pole supports including connections with lt line etc. complete., earthing of pcc pole/stp/dt with ms earth rod as per respo norms/specification., new guarding of ht lines with gi wire as per respo norms/specification., carriage of acsr dog/weseal conductor (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking., carriage of line material (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking., carriage of st pole (scrap) old material from pit site to je store/store center etah in distance range 0 to 10 km. including loading & unloading and proper stacking. are available inside the detailed notification files. Bidders planning to target this contract in Etah should check the official portal schedule early to complete their online technical and financial submission well before the closing hours.