The tender for item 1 , item 2 , item 3 , item 4 , item 5, augmentation of building, augmentation of building 1, augmentation of building 2, augmentation of building 3, augmentation of building 4, augmentation of building 5 supplying and placing in position main table,eru & pedestal of the following specifications. the main table shall be of size 3600 width mm x 1080 mm depth x 750 mm height. top surface of the table shall made up of mdf (medium density fibre ) board duly finished with veneer and final coating of pu. the main desk should contain in smart case - space slides effortlessly in style.the mobile pedestal shall be of size 480 width mm x 640 depth mm x 600 height mm. mobile pedestal shall be coated of mdf (medium density fiber) with veneer coating and pu coating.the eru top shall be of mdf (medium density fiber) board duly finished with veneer and final pu coating. size of eru top 1900 width mm x 480 depth mm x 550(not from ground with castors).the main desk is provided eith the wire management system also there is perfect storage side unit . 1 2 supplying and placing in position back unit of the following specifications. the size of the back unit shall be 1000 mm width x 480 mm depth x 2035 mm height. the back unit shall be made up of mdf board duly finished with veneer & final finish by pu coating. the mobile unit can be bought in multiples.pu coating hardness 1.5h. 2 3 providing, supplying and placing of 3 seater sofa. dimensions w x h x d (cm)222 x 103 x 89 .nomenclature & dimensions (mm): tolarence + / - 10 mm code description specification code description specification a total width 2220 b total depth 890 c total height 1030 d seating area width 1720 e seating area depth 520 f seating area height from ground 510 g arm height 645 h arm width 250 i back height from arm 420 j back width 2060 k arm depth 610 l leg height 70 m back height from seat 660 n lumbar height from seat 410 stitching: thread : polyester pitch :- 4 ( type of thread : nylon , polyester) ( pitch of thread i.e. stitch per inch) no. of ply in thread : 3 stitching tolarence : 10 mm minimum tex # (tkt #): 75 tkt leather/pvc/fabric: (pu/pvc/cotton/ polyester/ composite) pigmented leather + pvc thickness (mm) :leather=1.5mm / pvc=0.38mm weight (gsm) : pvc=750gsm tensile strength {wrap/weft} (kg/cm) : leather=300kg/cm2 + pvc=100kg/cm2 bursting strength (kg/cm2) : adhesion (pvc/pu backing) (kg/cm) : colour fastness to rubbing {dry /wet} (scale 1-5) : leather=5 / pvc=3 frame material (tropical wood / pine wood/ rubber wood): pine wood moisture content ( recommended 12 â 18 %) :15% anti â tremite treatment (recommended borex powder treatment) : kiln drying : conventional thickness of plywood used(mm) : 3mm/9mm/12mm/18mm standard of plywood used: commercial plywood seat foam: (density, type) * provide weight of recron filling used per seat* thickness (mm) : 127mm density (kg/m3): 27 kg/m3 + 30 kg/m3 type of foam (virgin/composite/moulded/ slabstock) : virgin * please provide layerwsie detail of foam used along with details of density & thickness* back foam: (density, type) * provide weight of recron filling used per seat* thickness (mm) : recron filling 1.0kg /seat density (kg/m3): n/a type of foam (virgin/composite/moulded/ slabstock) : n/a * please provide layerwsie 1 detail of foam used along with details of density & thickness* armrest foam: (density, type) * provide weight of recron filling used per seat* thickness (mm) : 38mm density (kg/m3): 27 kg/m3 + 30 kg/m3 type of foam (virgin/composite/moulded/ slabstock) : virgin * please provide layerwsie detail of foam used along with details of density & thickness* belt/ webbing material: width of belt (mm) : n/a. total length of belt used (mm): n/a. tensile strength (kg/cm) : n/a. recommended 3-4 vertical & 3 horizontal webbing mesh & 50 % stretch while fixing spring details ( s-spring / pocket spring): thickness of s-spring (mm) : 4.0mm & 34mm width number of springs used: -4 s-springs (zig-zag springs) + 1 tie rods/ seat length of s-spring used (mm) : n/a. number of pocket springs per seat: n/a. thickness of pocket spring (mm) : n/a. * provide details of number of pocket springs & pitch * leg material: * fixing of leg : (self tapping screw / insert with metric threading) :- n/a * material of leg : (plastic / insert moulding / wooden/ ms + chrome plating / ss) :- n/a * bush for leg bottom : (pvc bush / felt pad) :- n/a bonding solution: * type of glue used : (synthetic / rubber base/ water base/ solvent base) : rubber base glue * material handling data sheet (msds) for glue polyester fibre fill : * denier : 13 * fiber hollowness : 100% * siliconized fibre * conjugated fibre stapling pins: * size of pin : (zinc plated) yes * no. of pins : bottom non-woven cloth : * gsm : 100 gsm non woven cloth * colour : black colour metal under structure detail : * bedstead size : (in mm) * pipe / tube section : ( l x b x thickness) * mesh size : ( thickness & mesh square size) plating/ coating : type of plating : powder coating salt spray test : (in hours) recommended 96 hrs of salt spray for plating & 250 hrs for coating mechanism : manual / automatic : manual mechanism make : allstar warranty of mechanism : (recommended 3 years warranty on mechanism) actuator power rating : packing specs: carton ply gsm :- number of ply : bursting strength (kg/m2) : recommended 22 â 24 bs 5 ply gsm of paper : 200-180-180- 180-180 other remarks: as per specification or picture warranty : 2 years warranty for sofa upholstery 3 years warranty for recliner mechanism 4 providing, supplying and placing of 1 seater sofa. dimensions w x h x d (cm) 107 x 103 x 89. nomenclature & dimensions (mm): tolarence + / - 10 mm code description specification code description specification a total width 1070 b total depth 890 c total height 1030 d seating area width 580 e seating area depth 520 f seating area height from ground 510 g arm height 645 h arm width 250 i back height from arm 420 j back width 925 k arm depth 610 l leg height 70 m back height from seat 660 n lumbar height from seat 410 stitching: thread : polyester pitch :- 4 ( type of thread : nylon , polyester) ( pitch of thread i.e. stitch per inch) no. of ply in thread : 3 stitching tolarence : 10 mm minimum tex # (tkt #): 75 tkt leather/pvc/fabric: (pu/pvc/cotton/ polyester/ composite) pigmemted leather + pvc thickness (mm) :leather=1.5mm / pvc=0.38mm weight (gsm) : pvc=750gsm tensile strength {wrap/weft} (kg/cm) : leather=300kg/cm2 + pvc=100kg/cm2 bursting strength (kg/cm2) : adhesion (pvc/pu backing) (kg/cm) : colour fastness to rubbing {dry /wet} (scale 1-5) : leather=5 / pvc=3 frame material (tropical wood / pine wood/ rubber wood): pine wood moisture content ( recommended 12 â 18 %) :15% anti â tremite treatment (recommended borex powder treatment) : kiln drying : conventional thickness of plywood used(mm) : 3mm/9mm/12mm/18mm standard of plywood used: commercial plywood seat foam: (density, type) * provide weight of recron filling used per seat* thickness (mm) : 127mm density (kg/m3): 27 kg/m3 + 30 kg/m3 type of foam (virgin/composite/moulded/ slabstock) : virgin * please provide layerwsie detail of foam used along with details of density & thickness* back foam: (density, type) * provide weight of recron filling used per seat* thickness (mm) : recron filling 1.0kg /seat density (kg/m3): n/a type of foam (virgin/composite/moulded/ slabstock) : n/a * please provide layerwsie detail of foam used along with details of density & thickness* armrest foam: (density, type) * provide weight of recron filling used per seat* thickness (mm) : 38mm density (kg/m3): 27 kg/m3 + 30 kg/m3 type of foam (virgin/composite/moulded/ slabstock) : virgin * please provide layerwsie detail of foam used along with details of density & thickness* belt/ webbing material: width of belt (mm) : n/a. total length of belt used (mm): n/a. tensile strength (kg/cm) : n/a. recommended 3-4 vertical & 3 horizontal webbing mesh & 50 % stretch while fixing spring details ( s-spring / pocket spring): thickness of s-spring (mm) : 4.0mm & 34mm width number of springs used: 4 s-springs (zig-zag springs) + 1 tie rods per seat length of s-spring used (mm) : n/a. number of pocket springs per seat: n/a. thickness of pocket spring (mm) : n/a. * provide details of number of pocket springs & pitch * leg material: * fixing of leg : (self tapping screw / insert with metric threading) :- n/a * material of leg : (plastic / insert moulding / wooden/ ms + chrome plating / ss) :- n/a * bush for leg bottom : (pvc bush / felt pad) :- n/a bonding solution: * type of glue used : (synthetic / rubber base/ water base/ solvent base) : rubber base glue * material handling data sheet (msds) for glue polyester fibre fill : * denier : 13 * fiber hollowness : 100% * siliconized fibre * conjugated fibre stapling pins: * size of pin : (zinc plated) yes * 2 no. of pins : bottom non-woven cloth : * gsm : 100 gsm non woven cloth * colour : black colour metal under structure detail : * bedstead size : (in mm) * pipe / tube section : ( l x b x thickness) * mesh size : ( thickness & mesh square size) plating/ coating : type of plating : powder coating salt spray test : (in hours) recommended 96 hrs of salt spray for plating & 250 hrs for coating mechanism : manual / automatic : automatic mechanism make : allstar warranty of mechanism : (recommended 3 years warranty on mechanism) actuator power rating : 50w packing specs: carton ply gsm :- number of ply : bursting strength (kg/m2) : recommended 22 â 24 bs 5 ply gsm of paper : 200-180-180- 180-180 other remarks: as per specification or picture warranty : 2 years warranty for sofa upholstery 3 years warranty for recliner mechanism & actuator 5 providing, supplying and placing of coffee table overall size : width: 100cm depth : 65cm height : 43cm table materials: glass of 08 mm thk tempered, solid rubber woood legs and frame, ms sheet as bottom shelf .decoration materials & specifications: (density / type): pu coating to the rubber wood parts, clear glass rubber wood understructure with 12 mm tempered glass top. ms sheet at the base, with a laser-cut floral design, can be used as a display shelf.tapered legs with enhanced aesthetics 1 6 providing, supplying and placing of high back chair. seat assembly: the cushioned seat inner is made of injection moulded glass filled polyamide.upholstered seat sub-assembly consists of moulded high resilience (hr) polyurethane foam of density 45±2 kg/m³, and hardness load 16 ± 2 kgf as per is:7888 for 25% compression. *seat size: 45.5cm. (d) x 52.4cm. (w) back assembly: the cushioned back is made of pu foam with polypropylene injection molded plastic inner. *high back size: 50.5 cm. (w) x 76.7 cm. (d) armrests: the armrest having four range of adjustment · height adjustment sub assembly is inserted in the aluminum die cast arm body & all other adjustment are provided in adjustable arm top sub assembly. · up-down adjustment has 8 position (10.5±0.5cm range) · arm top swivel adjustment- 2 position, 12°±2° swivel inside · arm top width adjustment - any position (2.0±0.5cm range each arm top) · arm top to - fro adjustment- any position (4.0±0.5cm range) · armrest top is made up of high density pu molded over glass filled polyamide inner. posture perfect mechanism: the adjustable tilting mechanism is designed with the following features: · 360° revolving type. · forward tilt of sesat and back. · upright tilt lock. · tilt tension adjustment can be operated in seating position. · 3-position tilt limiter. seat depth adjustment: seat depth adjustment is housed below the seat and integrated with the mechanism with help of polypropene seat cover. seat depth can be adjusted in sitting position. seat depth adjustment range is of 5.0±0.5 cm. adjustable back support: back assembly is connected to buff polish die cast aluminum spine with an up-down mechanism assembly. back height can be adjusted in sitting position. it can be adjusted in the range of 7.5±0.5 cm. pneumatic height adjustment: the heavy duty class 4 pneumatic height adjustment has an adjustment stroke of 13.0±0.3 cm. pedestal: the pedestal is made of die-cast aluminium with buffing finish. it is fitted with 5nos. twin wheel castor. the pedestal is 67.0 ± 0.5cm pitchcenter dia. twin wheel castor: 5 nos. twin wheel soft castors are injection moulded in poly-amide with pu lining, having 6.5±0.1cm wheel diameter and assembled to pedestal. width (w): 74.0 cm. depth (d): 74.0 cm. height (h): 112.0 - 132.5 cm. seat height (sh): 44.5 - 58.0 cm. 2 7 providing, supplying and placing of visitor chair. chair upperstructure: it is a single shell 1.2 ±0.1cm. thick hot pressed plywood with moulded polyurethane foam on top & backing foam on rear side. it is upholstered with option of knitted & leatherette fabric.the seat has extra thick foam on front edge to give comfort to popliteal area.the foam backing done in back for extra fluffiness and comfort in chair. seat & back high resilience (hr) polyurethane foam :the hr polyurethane foam for seat and back is moulded with density 45 +/-2 kg/m³ and hardness load 16 ± 2 kgf as per is:7888 at 25% compression. m.s. visitor tubular frame : the powder coated (dft 40-60 micron) tubular frame is cantilever type & made of ø2.54±0.03 cm x 0.2±0.016 cm thk ms erw tube. armrests:the armrest top is moulded from polyurethane(pu) with metal insert and mounted on to a tubular frame. width (w): 60.5 cm. depth (d): 65.0 cm. height (h): 86.5 cm. seat height (sh): 46.0 cm 6 8 supplying and placing in position conference table of the following specifications. its size shall be 2400 width mm x 1200 depth mm x 750 height mm . top work surface shall be 12 mm thick tougher glass with back painted design on to under side and crystal edge polish finish . the construction shall be knock down construction . the understructure shall have all panels made from 36 mm thick pre-laminated board with 2 mm thick pvc edge beading . understructure also consists of storage for cpu , projector and paper storage . provision for glass adjustment for glass aligning . the wire management shall have legrand electricals used for wire management on tocentre support beam panel and cpu storage area for socket connections ,rj11,rj45 . 1 9 providing, supplying and placing of high back chair. seat/back assembly: the seat should be made up of 1.2 ±0.1cm. thick hot pressed plywood upholstered with fabric or synthetic leather and moulded polyurethane foam. the back should be made up 1.2 ±0.1cm. thick hot pressed plywood and upholstered with replaceable fabric or synthetic leather upholstery covers and moulded polyurethane foam. the back ply and foam should be designed with contoured lumber support for comfortable seating posture. back size: 48cm.(w) x 76.0cm.(h) seat size: 51.0cm.(w) x 48.0cm.(d) high resilience (hr) polyurethane foam: the hr polyurethane foam for seat and back should be moulded with density = 45 +/-2 kg/m³ and hardness load 16 ± 2 kgf for 25% compression. armrests :the armrest top should be made of moulded polyurethane (p.u) and mounted on to a drop lift height adjustable type m.s. tubular armrest support chrome plated. the armrest height should be adjustable up to 6.5±0.5cm. in 5 steps . knee tilt synchro mechanism with seat depth adjustment mechanism: the mechanism should be designed with the following features: ⢠360° revolving type single point control. ⢠front pivot for tilt with feet resting on ground ensuring more comfort. ⢠tilt tension adjustment. ⢠4-position locking with anti-shock feature. ⢠seat back tilting ratio of 1:2 ⢠seat depth adjustment of 6.0 ±0.5cm. can be locked in 6 positions adjustable backrest: the backrest consshould be ts of a sliding up down mechanism, which can be adjusted in the range of 7.5±0.5cm. and can be locked in 5 positions for correct position of lumber support. pneumatic height adjustment: the pneumatic height adjustment has an adjustment of 10.0±0.3cm. pedestal assembly: the pedestal should be fabricated from 0.2 ± 0.02 cm thick hr sheet . chrome plated and assembled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors. the pedestal should be 66.0±0.5cm. pitch-center dia. (76.0±1.0 cm with castors). twin wheel castors the twin wheel castors should be injection moulded in black nylon. overall dimensions of chair seat height - min 47.5 to max 57.5cm. height - min 103.5 to max 120.5cm. width & depth of chair as measured from pedestal - width-76.0 cm and depth-76.0 cm. 8 10 providing, placing and supplying of table: high-density high moisture resistance (hdhmr) worktop : worktop is made of 25mm thick pre-laminated hdhmr board. all edges of work surfaces shall provide with machinepessed 2mm thick pvc lipping glued with hot melt eva glue. the work tops are available in square (900x900). trio leg for 4 legged table: trio legs is fabricated from combination of 1.2 mm, 2 mm thk crca (as per is: 513), 3mm, 5mm thk hr (as per is: 2062) which has a triangular shape. argo shield welding is used for fabrication. this is a three dimensional leg which has inclination in 2 planes, it has a ball socket m8 leveler with bottom translucent cap, that allows adjustment up to 50 mm height. the whole structure is epoxy polyster powder coated (dft 40-60 microns). it is assembled using alloy steel hardware (ni / zn plated). cross member / connector : cross members in the upbeat system are made from 50 mm x 25 mm x 1.2mm thk (as per is: 7138 erw). cross members are assembled by friction fit pdc joinery and grub screws. the whole structure is epoxy polyster powder coated (dft 40-60 microns). it is assembled using alloy steel hardware (ni / zn plated). cross are available in 3 lengths, viz.: ( 350mm, 1100mm & 1700mm). 1 11 providing, placing and supplying of wood chair. wood understructure assembly: the under structure is made up of solid steamed beech wood of first grade and adjustable plinth screw. u/s assembly: 51.7cm (w) x 50cm (d) x 36.7cm (h) seat assembly: the seat is made up of 1.2 ± 0.1 cm thick hot - pressed plywood moulded by high resilience pu foam -density:65 ± 5kg/cu.m and upholstered with fabric. seat assembly: 49.5cm (w) x 47.6cm (d) x 8.3cm (h). back assembly: the back is made up of dia. 1cm ms rod -is:2062 and 0.6cm thk hr plate -is:2062 welded together and moulded by high resilience pu foam -density:65 ± 5kg/cu.m and upholstered with fabric. back assembly: 62.5cm (w) x 49.7cm (d) x 46.5cm (h). width: 62.5cm depth: 63.3cm height: 78.4cm seat height: 45cm from Tirupati, Andhra pradesh may be relevant for contractors, suppliers, vendors, manufacturers, consultants, service providers, startups, MSMEs, and other organizations involved in related products, services, or works. However, eligibility to participate depends on the qualification criteria specified by Central board of indirect taxes and customs CBIC in the official tender documents.
Before submitting a bid, interested applicants should carefully review the eligibility conditions, technical requirements, financial criteria, work experience requirements, annual turnover conditions, registrations, certifications, and any other supporting documents required by the tendering authority. The detailed qualification requirements and bidder eligibility criteria are available in the tender notice and related documents provided on this page.
Ensuring compliance with all eligibility and qualification requirements before bid submission can help bidders avoid disqualification and improve their chances of successful participation in the tender process.
Tende18 provides comprehensive tender bidding services, including a complete tender summary along with a detailed analysis of the Tender Qualification and Eligibility Criteria.
