corrigendum tender for supply part for retrofitting of lt panel by supply and installation , service part for retrofitting of lt panel by supply and installation , supply of main incoming lt power distribution panels slipway , installation , replace, test and commissioning of main incoming lt power distribution panels slipway , supply of welding and lighting panels slipway , installation , replace, test and commissioning of welding and lighting panels slipway , supply of 3.5c x 400 sq.mm aluminum cable from substation-02 to slipway , laying, fixing, testing and commissioning of 3.5c x 400 sq.mm aluminum cable from substation-02 to slipway , supply of 3.5cx 185 sq.mm aluminum cable from slipway-2 and 3 main incoming panels to welding and lighting panels , laying, fixing, testing and commissioning of 3.5cx 185 sq.mm aluminum cable from slipway-2 and 3 main incoming panels to welding and lighting panels , supply and fitment of suitable end termination kits - straight through joints kits of required quantity to all the incoming and outgoing cables at both ends of slipway-02, slipway-03, substations, etc , providing earth pits with 75mm ci pipe as is standards , supply and laying of gi flat 50 x10 mm necessary joints with nut and bolts from earth pit to panel boards , repair and excavation of cable trench of 75mm thick up to 90cm depth , fixing of perforated cable tray on slipways 02 and 03 and securing of cables with metal ties and capping and casing to be provided , foundation for all lt panels i.e. steel foundations with concrete pedestal for panels all incoming and welding and lighting panels, refurbishment and replacement of electrical panels, supply part for retrofitting of lt panel by supply & installation of 1250a,50ka,edo acb along with suitable bus bar rating at north & ss2 lt panels as per technical specification & sow., service part for retrofitting of lt panel by supply & installation of 1250a,50ka,edo acb along with suitable bus bar rating at north & ss2 lt panels as per technical specification & sow., supply of main incoming lt power distribution panels slipway-2&3 as per technical spec & sow., installation , replace, test and commissioning of main incoming lt power distribution panels slipway-2&3 (4nos.) as per technical spec & sow., supply of welding and lighting panels slipway-2&3 (17nos) as per technical spec & sow., installation , replace, test and commissioning of welding and lighting panels slipway-2&3 (17nos) as per technical spec & sow., supply of 3.5c x 400 sq.mm aluminum cable (from substation-02 to slipway-2&3 main incoming panels) as per technical specification & sow., laying, fixing, testing and commissioning of 3.5c x 400 sq.mm aluminum cable (from substation-02 to slipway-2&3 main incoming panels) as per technical specification & sow., supply of 3.5cx 185 sq.mm aluminum cable (from slipway-2&3 main incoming panels to welding and lighting panels) as per technical specification & sow., laying, fixing, testing and commissioning of 3.5cx 185 sq.mm aluminum cable (from slipway-2&3 main incoming panels to welding and lighting panels) as per technical specification & sow., supply and fitment of suitable end termination kits / straight through joints kits of required quantity to all the incoming & outgoing cables at both ends of slipway-02, slipway-03, substations, etc., as per tech spec. & sow, providing earth pits with 75mm ci pipe as is standards as per technical specification & sow., supply and laying of gi flat 50 x10 mm necessary joints with nut and bolts from earth pit to panel boards as per technical specification & sow, repair and excavation of cable trench (of 75mm thick) up to 90cm depth as per technical specification & sow., fixing of perforated cable tray on slipways 02 & 03 and securing of cables with metal ties and capping & casing to be provided as per technical specification & sow., foundation for all lt panels i.e. steel foundations with concrete pedestal for panels (all incoming and welding & lighting panels as per technical specification & sow.

You can fill out the integrated inquiry form below on this detail page to share your company profile. Our consultancy desk will review your query regarding electrical panels,end termination,panel boards,cable tray,lt panel,cables,bolts,pipe,nut parameters and guide you on how to coordinate efficiently with the procurement team of Hindustan shipyard limited HSL

Tender18 provides end-to-end professional bidding support and documentation advisory for corrigendum tender for supply part for retrofitting of lt panel by supply and installation , service part for retrofitting of lt panel by supply and installation , supply of main incoming lt power distribution panels slipway , installation , replace, test and commissioning of main incoming lt power distribution panels slipway , supply of welding and lighting panels slipway , installation , replace, test and commissioning of welding and lighting panels slipway , supply of 3.5c x 400 sq.mm aluminum cable from substation-02 to slipway , laying, fixing, testing and commissioning of 3.5c x 400 sq.mm aluminum cable from substation-02 to slipway , supply of 3.5cx 185 sq.mm aluminum cable from slipway-2 and 3 main incoming panels to welding and lighting panels , laying, fixing, testing and commissioning of 3.5cx 185 sq.mm aluminum cable from slipway-2 and 3 main incoming panels to welding and lighting panels , supply and fitment of suitable end termination kits - straight through joints kits of required quantity to all the incoming and outgoing cables at both ends of slipway-02, slipway-03, substations, etc , providing earth pits with 75mm ci pipe as is standards , supply and laying of gi flat 50 x10 mm necessary joints with nut and bolts from earth pit to panel boards , repair and excavation of cable trench of 75mm thick up to 90cm depth , fixing of perforated cable tray on slipways 02 and 03 and securing of cables with metal ties and capping and casing to be provided , foundation for all lt panels i.e. steel foundations with concrete pedestal for panels all incoming and welding and lighting panels, refurbishment and replacement of electrical panels, supply part for retrofitting of lt panel by supply & installation of 1250a,50ka,edo acb along with suitable bus bar rating at north & ss2 lt panels as per technical specification & sow., service part for retrofitting of lt panel by supply & installation of 1250a,50ka,edo acb along with suitable bus bar rating at north & ss2 lt panels as per technical specification & sow., supply of main incoming lt power distribution panels slipway-2&3 as per technical spec & sow., installation , replace, test and commissioning of main incoming lt power distribution panels slipway-2&3 (4nos.) as per technical spec & sow., supply of welding and lighting panels slipway-2&3 (17nos) as per technical spec & sow., installation , replace, test and commissioning of welding and lighting panels slipway-2&3 (17nos) as per technical spec & sow., supply of 3.5c x 400 sq.mm aluminum cable (from substation-02 to slipway-2&3 main incoming panels) as per technical specification & sow., laying, fixing, testing and commissioning of 3.5c x 400 sq.mm aluminum cable (from substation-02 to slipway-2&3 main incoming panels) as per technical specification & sow., supply of 3.5cx 185 sq.mm aluminum cable (from slipway-2&3 main incoming panels to welding and lighting panels) as per technical specification & sow., laying, fixing, testing and commissioning of 3.5cx 185 sq.mm aluminum cable (from slipway-2&3 main incoming panels to welding and lighting panels) as per technical specification & sow., supply and fitment of suitable end termination kits / straight through joints kits of required quantity to all the incoming & outgoing cables at both ends of slipway-02, slipway-03, substations, etc., as per tech spec. & sow, providing earth pits with 75mm ci pipe as is standards as per technical specification & sow., supply and laying of gi flat 50 x10 mm necessary joints with nut and bolts from earth pit to panel boards as per technical specification & sow, repair and excavation of cable trench (of 75mm thick) up to 90cm depth as per technical specification & sow., fixing of perforated cable tray on slipways 02 & 03 and securing of cables with metal ties and capping & casing to be provided as per technical specification & sow., foundation for all lt panels i.e. steel foundations with concrete pedestal for panels (all incoming and welding & lighting panels as per technical specification & sow. . Our senior analysts help you decode the complete project guidelines, manage accurate costing sheets, and complete error-free submissions on the official platform used by Hindustan shipyard limited HSL.

Most online bids face rejection during the initial evaluation round due to avoidable errors like uploading blurred document scans, submitting expired DSCs, or missing critical experience papers required for corrigendum tender for supply part for retrofitting of lt panel by supply and installation , service part for retrofitting of lt panel by supply and installation , supply of main incoming lt power distribution panels slipway , installation , replace, test and commissioning of main incoming lt power distribution panels slipway , supply of welding and lighting panels slipway , installation , replace, test and commissioning of welding and lighting panels slipway , supply of 3.5c x 400 sq.mm aluminum cable from substation-02 to slipway , laying, fixing, testing and commissioning of 3.5c x 400 sq.mm aluminum cable from substation-02 to slipway , supply of 3.5cx 185 sq.mm aluminum cable from slipway-2 and 3 main incoming panels to welding and lighting panels , laying, fixing, testing and commissioning of 3.5cx 185 sq.mm aluminum cable from slipway-2 and 3 main incoming panels to welding and lighting panels , supply and fitment of suitable end termination kits - straight through joints kits of required quantity to all the incoming and outgoing cables at both ends of slipway-02, slipway-03, substations, etc , providing earth pits with 75mm ci pipe as is standards , supply and laying of gi flat 50 x10 mm necessary joints with nut and bolts from earth pit to panel boards , repair and excavation of cable trench of 75mm thick up to 90cm depth , fixing of perforated cable tray on slipways 02 and 03 and securing of cables with metal ties and capping and casing to be provided , foundation for all lt panels i.e. steel foundations with concrete pedestal for panels all incoming and welding and lighting panels, refurbishment and replacement of electrical panels, supply part for retrofitting of lt panel by supply & installation of 1250a,50ka,edo acb along with suitable bus bar rating at north & ss2 lt panels as per technical specification & sow., service part for retrofitting of lt panel by supply & installation of 1250a,50ka,edo acb along with suitable bus bar rating at north & ss2 lt panels as per technical specification & sow., supply of main incoming lt power distribution panels slipway-2&3 as per technical spec & sow., installation , replace, test and commissioning of main incoming lt power distribution panels slipway-2&3 (4nos.) as per technical spec & sow., supply of welding and lighting panels slipway-2&3 (17nos) as per technical spec & sow., installation , replace, test and commissioning of welding and lighting panels slipway-2&3 (17nos) as per technical spec & sow., supply of 3.5c x 400 sq.mm aluminum cable (from substation-02 to slipway-2&3 main incoming panels) as per technical specification & sow., laying, fixing, testing and commissioning of 3.5c x 400 sq.mm aluminum cable (from substation-02 to slipway-2&3 main incoming panels) as per technical specification & sow., supply of 3.5cx 185 sq.mm aluminum cable (from slipway-2&3 main incoming panels to welding and lighting panels) as per technical specification & sow., laying, fixing, testing and commissioning of 3.5cx 185 sq.mm aluminum cable (from slipway-2&3 main incoming panels to welding and lighting panels) as per technical specification & sow., supply and fitment of suitable end termination kits / straight through joints kits of required quantity to all the incoming & outgoing cables at both ends of slipway-02, slipway-03, substations, etc., as per tech spec. & sow, providing earth pits with 75mm ci pipe as is standards as per technical specification & sow., supply and laying of gi flat 50 x10 mm necessary joints with nut and bolts from earth pit to panel boards as per technical specification & sow, repair and excavation of cable trench (of 75mm thick) up to 90cm depth as per technical specification & sow., fixing of perforated cable tray on slipways 02 & 03 and securing of cables with metal ties and capping & casing to be provided as per technical specification & sow., foundation for all lt panels i.e. steel foundations with concrete pedestal for panels (all incoming and welding & lighting panels as per technical specification & sow. in Andhra pradesh.

Eligibility for outstation bidders depends entirely on the terms set inside the document for corrigendum tender for supply part for retrofitting of lt panel by supply and installation , service part for retrofitting of lt panel by supply and installation , supply of main incoming lt power distribution panels slipway , installation , replace, test and commissioning of main incoming lt power distribution panels slipway , supply of welding and lighting panels slipway , installation , replace, test and commissioning of welding and lighting panels slipway , supply of 3.5c x 400 sq.mm aluminum cable from substation-02 to slipway , laying, fixing, testing and commissioning of 3.5c x 400 sq.mm aluminum cable from substation-02 to slipway , supply of 3.5cx 185 sq.mm aluminum cable from slipway-2 and 3 main incoming panels to welding and lighting panels , laying, fixing, testing and commissioning of 3.5cx 185 sq.mm aluminum cable from slipway-2 and 3 main incoming panels to welding and lighting panels , supply and fitment of suitable end termination kits - straight through joints kits of required quantity to all the incoming and outgoing cables at both ends of slipway-02, slipway-03, substations, etc , providing earth pits with 75mm ci pipe as is standards , supply and laying of gi flat 50 x10 mm necessary joints with nut and bolts from earth pit to panel boards , repair and excavation of cable trench of 75mm thick up to 90cm depth , fixing of perforated cable tray on slipways 02 and 03 and securing of cables with metal ties and capping and casing to be provided , foundation for all lt panels i.e. steel foundations with concrete pedestal for panels all incoming and welding and lighting panels, refurbishment and replacement of electrical panels, supply part for retrofitting of lt panel by supply & installation of 1250a,50ka,edo acb along with suitable bus bar rating at north & ss2 lt panels as per technical specification & sow., service part for retrofitting of lt panel by supply & installation of 1250a,50ka,edo acb along with suitable bus bar rating at north & ss2 lt panels as per technical specification & sow., supply of main incoming lt power distribution panels slipway-2&3 as per technical spec & sow., installation , replace, test and commissioning of main incoming lt power distribution panels slipway-2&3 (4nos.) as per technical spec & sow., supply of welding and lighting panels slipway-2&3 (17nos) as per technical spec & sow., installation , replace, test and commissioning of welding and lighting panels slipway-2&3 (17nos) as per technical spec & sow., supply of 3.5c x 400 sq.mm aluminum cable (from substation-02 to slipway-2&3 main incoming panels) as per technical specification & sow., laying, fixing, testing and commissioning of 3.5c x 400 sq.mm aluminum cable (from substation-02 to slipway-2&3 main incoming panels) as per technical specification & sow., supply of 3.5cx 185 sq.mm aluminum cable (from slipway-2&3 main incoming panels to welding and lighting panels) as per technical specification & sow., laying, fixing, testing and commissioning of 3.5cx 185 sq.mm aluminum cable (from slipway-2&3 main incoming panels to welding and lighting panels) as per technical specification & sow., supply and fitment of suitable end termination kits / straight through joints kits of required quantity to all the incoming & outgoing cables at both ends of slipway-02, slipway-03, substations, etc., as per tech spec. & sow, providing earth pits with 75mm ci pipe as is standards as per technical specification & sow., supply and laying of gi flat 50 x10 mm necessary joints with nut and bolts from earth pit to panel boards as per technical specification & sow, repair and excavation of cable trench (of 75mm thick) up to 90cm depth as per technical specification & sow., fixing of perforated cable tray on slipways 02 & 03 and securing of cables with metal ties and capping & casing to be provided as per technical specification & sow., foundation for all lt panels i.e. steel foundations with concrete pedestal for panels (all incoming and welding & lighting panels as per technical specification & sow.. While many public sector projects allow national competitive bidding, certain localized works require local offices or specific registration metrics in Visakhapatnam.

If this procurement is routed through the central marketplace, an active GeM Seller ID is mandatory to supply electrical panels,end termination,panel boards,cable tray,lt panel,cables,bolts,pipe,nut items. Tender18 offers complete assistance for brand cataloging, profile creation, and vendor assessment required officially by Hindustan shipyard limited HSL

To register an eligible bid for these electrical panels,end termination,panel boards,cable tray,lt panel,cables,bolts,pipe,nut contracts, companies must prepare their core compliance documents. Vendors operating across Andhra pradesh must ensure they possess a valid GST registration, permanent account number (PAN), and active Class-3 Digital Signature Certificates.

This public procurement cycle is specifically looking for qualified vendors and suppliers who can provide high-quality electrical panels,end termination,panel boards,cable tray,lt panel,cables,bolts,pipe,nut solutions. The operational execution, delivery, and deployment of these materials must be managed locally within the Visakhapatnam region.

The estimated project cost and budget thresholds can be reviewed directly inside the tender document. Bidders can analyze these qualification files to check if their firm meets the financial capability criteria specified for corrigendum tender for supply part for retrofitting of lt panel by supply and installation , service part for retrofitting of lt panel by supply and installation , supply of main incoming lt power distribution panels slipway , installation , replace, test and commissioning of main incoming lt power distribution panels slipway , supply of welding and lighting panels slipway , installation , replace, test and commissioning of welding and lighting panels slipway , supply of 3.5c x 400 sq.mm aluminum cable from substation-02 to slipway , laying, fixing, testing and commissioning of 3.5c x 400 sq.mm aluminum cable from substation-02 to slipway , supply of 3.5cx 185 sq.mm aluminum cable from slipway-2 and 3 main incoming panels to welding and lighting panels , laying, fixing, testing and commissioning of 3.5cx 185 sq.mm aluminum cable from slipway-2 and 3 main incoming panels to welding and lighting panels , supply and fitment of suitable end termination kits - straight through joints kits of required quantity to all the incoming and outgoing cables at both ends of slipway-02, slipway-03, substations, etc , providing earth pits with 75mm ci pipe as is standards , supply and laying of gi flat 50 x10 mm necessary joints with nut and bolts from earth pit to panel boards , repair and excavation of cable trench of 75mm thick up to 90cm depth , fixing of perforated cable tray on slipways 02 and 03 and securing of cables with metal ties and capping and casing to be provided , foundation for all lt panels i.e. steel foundations with concrete pedestal for panels all incoming and welding and lighting panels, refurbishment and replacement of electrical panels, supply part for retrofitting of lt panel by supply & installation of 1250a,50ka,edo acb along with suitable bus bar rating at north & ss2 lt panels as per technical specification & sow., service part for retrofitting of lt panel by supply & installation of 1250a,50ka,edo acb along with suitable bus bar rating at north & ss2 lt panels as per technical specification & sow., supply of main incoming lt power distribution panels slipway-2&3 as per technical spec & sow., installation , replace, test and commissioning of main incoming lt power distribution panels slipway-2&3 (4nos.) as per technical spec & sow., supply of welding and lighting panels slipway-2&3 (17nos) as per technical spec & sow., installation , replace, test and commissioning of welding and lighting panels slipway-2&3 (17nos) as per technical spec & sow., supply of 3.5c x 400 sq.mm aluminum cable (from substation-02 to slipway-2&3 main incoming panels) as per technical specification & sow., laying, fixing, testing and commissioning of 3.5c x 400 sq.mm aluminum cable (from substation-02 to slipway-2&3 main incoming panels) as per technical specification & sow., supply of 3.5cx 185 sq.mm aluminum cable (from slipway-2&3 main incoming panels to welding and lighting panels) as per technical specification & sow., laying, fixing, testing and commissioning of 3.5cx 185 sq.mm aluminum cable (from slipway-2&3 main incoming panels to welding and lighting panels) as per technical specification & sow., supply and fitment of suitable end termination kits / straight through joints kits of required quantity to all the incoming & outgoing cables at both ends of slipway-02, slipway-03, substations, etc., as per tech spec. & sow, providing earth pits with 75mm ci pipe as is standards as per technical specification & sow., supply and laying of gi flat 50 x10 mm necessary joints with nut and bolts from earth pit to panel boards as per technical specification & sow, repair and excavation of cable trench (of 75mm thick) up to 90cm depth as per technical specification & sow., fixing of perforated cable tray on slipways 02 & 03 and securing of cables with metal ties and capping & casing to be provided as per technical specification & sow., foundation for all lt panels i.e. steel foundations with concrete pedestal for panels (all incoming and welding & lighting panels as per technical specification & sow. by Hindustan shipyard limited HSL

You can download the commercial Bill of Quantities (BOQ) spreadsheet directly using the secure link provided on this page. The BOQ file contains the item descriptions and rate filling forms officially validated for corrigendum tender for supply part for retrofitting of lt panel by supply and installation , service part for retrofitting of lt panel by supply and installation , supply of main incoming lt power distribution panels slipway , installation , replace, test and commissioning of main incoming lt power distribution panels slipway , supply of welding and lighting panels slipway , installation , replace, test and commissioning of welding and lighting panels slipway , supply of 3.5c x 400 sq.mm aluminum cable from substation-02 to slipway , laying, fixing, testing and commissioning of 3.5c x 400 sq.mm aluminum cable from substation-02 to slipway , supply of 3.5cx 185 sq.mm aluminum cable from slipway-2 and 3 main incoming panels to welding and lighting panels , laying, fixing, testing and commissioning of 3.5cx 185 sq.mm aluminum cable from slipway-2 and 3 main incoming panels to welding and lighting panels , supply and fitment of suitable end termination kits - straight through joints kits of required quantity to all the incoming and outgoing cables at both ends of slipway-02, slipway-03, substations, etc , providing earth pits with 75mm ci pipe as is standards , supply and laying of gi flat 50 x10 mm necessary joints with nut and bolts from earth pit to panel boards , repair and excavation of cable trench of 75mm thick up to 90cm depth , fixing of perforated cable tray on slipways 02 and 03 and securing of cables with metal ties and capping and casing to be provided , foundation for all lt panels i.e. steel foundations with concrete pedestal for panels all incoming and welding and lighting panels, refurbishment and replacement of electrical panels, supply part for retrofitting of lt panel by supply & installation of 1250a,50ka,edo acb along with suitable bus bar rating at north & ss2 lt panels as per technical specification & sow., service part for retrofitting of lt panel by supply & installation of 1250a,50ka,edo acb along with suitable bus bar rating at north & ss2 lt panels as per technical specification & sow., supply of main incoming lt power distribution panels slipway-2&3 as per technical spec & sow., installation , replace, test and commissioning of main incoming lt power distribution panels slipway-2&3 (4nos.) as per technical spec & sow., supply of welding and lighting panels slipway-2&3 (17nos) as per technical spec & sow., installation , replace, test and commissioning of welding and lighting panels slipway-2&3 (17nos) as per technical spec & sow., supply of 3.5c x 400 sq.mm aluminum cable (from substation-02 to slipway-2&3 main incoming panels) as per technical specification & sow., laying, fixing, testing and commissioning of 3.5c x 400 sq.mm aluminum cable (from substation-02 to slipway-2&3 main incoming panels) as per technical specification & sow., supply of 3.5cx 185 sq.mm aluminum cable (from slipway-2&3 main incoming panels to welding and lighting panels) as per technical specification & sow., laying, fixing, testing and commissioning of 3.5cx 185 sq.mm aluminum cable (from slipway-2&3 main incoming panels to welding and lighting panels) as per technical specification & sow., supply and fitment of suitable end termination kits / straight through joints kits of required quantity to all the incoming & outgoing cables at both ends of slipway-02, slipway-03, substations, etc., as per tech spec. & sow, providing earth pits with 75mm ci pipe as is standards as per technical specification & sow., supply and laying of gi flat 50 x10 mm necessary joints with nut and bolts from earth pit to panel boards as per technical specification & sow, repair and excavation of cable trench (of 75mm thick) up to 90cm depth as per technical specification & sow., fixing of perforated cable tray on slipways 02 & 03 and securing of cables with metal ties and capping & casing to be provided as per technical specification & sow., foundation for all lt panels i.e. steel foundations with concrete pedestal for panels (all incoming and welding & lighting panels as per technical specification & sow. within the Andhra pradesh jurisdiction

The official timeline and deadline details for corrigendum tender for supply part for retrofitting of lt panel by supply and installation , service part for retrofitting of lt panel by supply and installation , supply of main incoming lt power distribution panels slipway , installation , replace, test and commissioning of main incoming lt power distribution panels slipway , supply of welding and lighting panels slipway , installation , replace, test and commissioning of welding and lighting panels slipway , supply of 3.5c x 400 sq.mm aluminum cable from substation-02 to slipway , laying, fixing, testing and commissioning of 3.5c x 400 sq.mm aluminum cable from substation-02 to slipway , supply of 3.5cx 185 sq.mm aluminum cable from slipway-2 and 3 main incoming panels to welding and lighting panels , laying, fixing, testing and commissioning of 3.5cx 185 sq.mm aluminum cable from slipway-2 and 3 main incoming panels to welding and lighting panels , supply and fitment of suitable end termination kits - straight through joints kits of required quantity to all the incoming and outgoing cables at both ends of slipway-02, slipway-03, substations, etc , providing earth pits with 75mm ci pipe as is standards , supply and laying of gi flat 50 x10 mm necessary joints with nut and bolts from earth pit to panel boards , repair and excavation of cable trench of 75mm thick up to 90cm depth , fixing of perforated cable tray on slipways 02 and 03 and securing of cables with metal ties and capping and casing to be provided , foundation for all lt panels i.e. steel foundations with concrete pedestal for panels all incoming and welding and lighting panels, refurbishment and replacement of electrical panels, supply part for retrofitting of lt panel by supply & installation of 1250a,50ka,edo acb along with suitable bus bar rating at north & ss2 lt panels as per technical specification & sow., service part for retrofitting of lt panel by supply & installation of 1250a,50ka,edo acb along with suitable bus bar rating at north & ss2 lt panels as per technical specification & sow., supply of main incoming lt power distribution panels slipway-2&3 as per technical spec & sow., installation , replace, test and commissioning of main incoming lt power distribution panels slipway-2&3 (4nos.) as per technical spec & sow., supply of welding and lighting panels slipway-2&3 (17nos) as per technical spec & sow., installation , replace, test and commissioning of welding and lighting panels slipway-2&3 (17nos) as per technical spec & sow., supply of 3.5c x 400 sq.mm aluminum cable (from substation-02 to slipway-2&3 main incoming panels) as per technical specification & sow., laying, fixing, testing and commissioning of 3.5c x 400 sq.mm aluminum cable (from substation-02 to slipway-2&3 main incoming panels) as per technical specification & sow., supply of 3.5cx 185 sq.mm aluminum cable (from slipway-2&3 main incoming panels to welding and lighting panels) as per technical specification & sow., laying, fixing, testing and commissioning of 3.5cx 185 sq.mm aluminum cable (from slipway-2&3 main incoming panels to welding and lighting panels) as per technical specification & sow., supply and fitment of suitable end termination kits / straight through joints kits of required quantity to all the incoming & outgoing cables at both ends of slipway-02, slipway-03, substations, etc., as per tech spec. & sow, providing earth pits with 75mm ci pipe as is standards as per technical specification & sow., supply and laying of gi flat 50 x10 mm necessary joints with nut and bolts from earth pit to panel boards as per technical specification & sow, repair and excavation of cable trench (of 75mm thick) up to 90cm depth as per technical specification & sow., fixing of perforated cable tray on slipways 02 & 03 and securing of cables with metal ties and capping & casing to be provided as per technical specification & sow., foundation for all lt panels i.e. steel foundations with concrete pedestal for panels (all incoming and welding & lighting panels as per technical specification & sow. are available inside the detailed notification files. Bidders planning to target this contract in Visakhapatnam should check the official portal schedule early to complete their online technical and financial submission well before the closing hours.