Search Tenders

Filters

Reset All

Tender Status

All India TendersNew TendersLive TendersArchive Tenders

T18 Ref No

All States

All Cities

All Agencies

Tender ID

Due Date

Tender Value

Tender Source (GeM, Cppp & Others)

Tender Type

26Latest Wood working machine Tenders List

Name: Tender18 Infotech Private Limited
Address: B-913/914, Sivanta One The Business Park,Opp. Bank of Baroda, Pritam Nagar, Paldi ,, Ahmedabad, 380007, IN
Telephone: 7069661818
Price range: 00

Latest Wood working machine Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Wood working machine tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Wood working machine tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.

Real-Time Wood working machine Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Wood working machine tenders into:

Supply Tenders – BOQs and specifications sourced from GeM and PSUs
Service Tenders – NITs and scope of work from CPPP and state portals
EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.

Comprehensive Sources of Wood working machine Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
Railways & Transport – IREPS and Metro Rail projects
Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
Defense & Strategic Sectors – MES and DRDO tenders
State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.

Step-by-Step Guide to Participate in Wood working machine Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

Financial turnover requirements (30–50% of tender value)
Past experience (2–3 similar projects)
Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

Digital Signature Certificate (Class 3 DSC)
GST, PAN, MSME/Udyam registration
EMD (Earnest Money Deposit) or exemption proof
Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

Analyze item-wise pricing
Ensure competitive yet sustainable quotes
Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.

Why Tender18 is a Trusted Platform for Wood working machine Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Wood working machine tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.

Growth of Wood working machine Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Wood working machine sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

L1 Purchase
Direct Procurement
MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts

Frequently Asked Questions (SEO Optimized)

How can I get daily Wood working machine tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Wood working machine tenders.

Is EMD mandatory for all Wood working machine tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Wood working machine work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Wood working machine tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.

Get Expert Support for Wood working machine Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

Tender discovery & analysis
Documentation support
Bid strategy & submission
GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

T18 Ref No : 17188120

Location : karnal , haryana

Source : GEM Tenders

LIVE TENDER

tender for multipurpose wood working machine (q3)

Agency / Dept :

indian council of agricultural research ICAR

Due Date :

Sep 19, 2026 (7 days left)

Tender Value :

Refer Document

View Documents

T18 Ref No : 16901990

Location : ranchi , jharkhand

Source : GEM Tenders

LIVE TENDER

tender for multipurpose wood working machine , submersible motor pump set three phase 5 hp , submersible pump or open well 5hp 3 phase , monoblock pump 2 hp , medium weight chipping hammer , aluminium ladder 20 feet long , hammering drill machine , hydraulic crimper , aluminium ladder 10 feet long , tile or stone or marble cutter, heavy machine purchase, size 13 inch speed of 4 cutting band saw blade length 12 to18 inch electrical motor 3hp 1440 rpm copper coil, multi stage discharge head 260 mtr copper coil, discharge head 24 mtr discharge capacity in litter per hour 16 discharge head 24 meter speed rpm 2810 copper coil, 2 hp single phase rpm 2500 to3000 rpm copper coil, weight 15 to18 kg material of bit h t s noise level 120ds power rating 1510 watt copper coil, 20 feet heavy duty aluminium platform step ladder, mi rhd 22 drill machine having drilling capacity, 8 ton hydraulic crimping tool hydraulic cable crimper hand tool with 16 dies 4 70 cum portable electrical terminal cable wire tool kit, 10 feet long heavy duty aluminium platform step ladder, 1450 watt 125 mm 12000 rpm 3 kg and hex key hexagon socket wrench isi mark or std qlty approved brand

Agency / Dept :

indo tibetan border police ITBP

Due Date :

Sep 12, 2026 (Expire Today)

Tender Value :

Refer Document

View Documents

T18 Ref No : 17029546

Location : leh , ladakh

Source : GEM Tenders

LIVE TENDER

Agency / Dept :

public works department PWD

Due Date :

Sep 12, 2026 (Expire Today)

Tender Value :

Refer Document

View Documents

T18 Ref No : 16835395

Location : ghatshila , jharkhand

Source : GEM Tenders

LIVE TENDER

tender for demolishing r.c.c work , demolishing cement concrete , earth work , filling available excavated earth , filling in plinth with sand , plain cement concrete 1 isto 3 isto 6 , laying position cement concrete 1 isto 2 isto 4 , reinforced cement concrete work 1 isto 1.5 isto 3 , steel reinforcement , providing and fixing centering and shuttering , lintels or beams or plinth beams or chujja or griders or bressumers and cantilevers , structural steel work , brick work foundation and plinth , brick work in super structure , half brick masonry , 12 mm thick cement plaster 1 isto 6 , 15 mm thick cement plaster , 12 mm thick cement plaster 1 isto 4 , providing and fixing concertina coil , premium acrlic smooth exterior paint , chain link , supplying and laying painting with synthetic enamel paint , steel work in built up tubular , transportation of building rubbish , transportation of excavated earth , surface dressing , cleaning jungle , providing and applying priming coat with ready mixed wood, construction of boundary wall from sitadanga to jaduguda thana in ucil housing colony jaduguda, demolishing r.c.c work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material within 2 km lead as per direction of engineer in charge ., demolishing cement concrete mix 1 / 3 /6 as richer mix manually or by mechanical means including disposal of material within 1 km lead as per directions of engineer in charge ., earth work in excavation in foundation, trenches or drains not exceeding 1.50m in width or 10.00 sqm on plain including dressing of sites and ramming of bottoms, lift upto 1.50m including getting out the excavated soil and disposal of surplus excavated soil, including dewatering and directed with a lead of 500 m ., filling available excavated earth (excluding rock) in trenches plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.50 m., supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete of direction of the engineer in charge., providing and laying plain cement concrete1/3/6 - 1 cement /3 coarse sand / 6 graded stone aggregate 40mm nominal size in foundation plinth wherever necessary including desalinating finishing curing etc as per specification all complete but excluding the cost of centering and shuttering etc, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level 1 isto 2 isto 4 (1 cement / 2 coarse sand / 4 graded stone aggregate 20mm nominal size), providing and laying reinforced cement concrete work 1 isto 1.5 isto 3 - 1 cement /1.5 coarse sand / 3 graded stone aggregate 20mm down screened and washed including machine mixing placing in position and mechanically vibrating in columns pillars etc to any level and anywhere and like including preparing of the top surface finishing curing etc complete in all respects as per specification and direction of the engineer-in-charge, steel reinforcement for reinforced cement concrete work including transporting decoiling straightening derusting placing cutting to requiste length hooking bending to correct shape placing in proper position and binding with 16 gauge black annealed wire at every intersection including removal of loos rust and applying a coat of cement wash if necessary complete in all respects as per drawing and as directed, providing and fixing centering and shuttering including strutting, propping etc. and removal of form for foundation, footings, bases of column etc. for mass concrete., providing and fixing centering and shuttering including strutting propping etc and removal of form for - lintels beams plinth beams chujja girders bressumers and cantilevers, providing and laying structural steel work riveted bolted or welded in built up sections trusses and framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete., providing and laying 1st class brick work with bricks of class designation 75 in foundation and plinth in cement mortar 1/6 -1 cement / 6 coarse sand including all complete as per specification drawing and direction of the eic., providing and laying best quality brick work in super structure upto floor two level 1/6- 1 cement / 6 coarse sand including curing scaffolding shuttering etc all complete. all materials including cement etc to be supplied by the contractor, half brick masonry with common burnt clay f.p.s non modular bricks of class designation 7.5 in foundations and plinth in cement mortar 1/4 - 1 cement / 4 coarse sand, providing and laying 12 mm thick cement plaster 1/6 -1 cement /6 fine sand all complete as per specifications. all materials including cement etc to be supplied by the contractor, providing 15 mm thick cement plaster to a rough side in cement mortar 1/6 - 1 cement / 6 fine sand including scaffolding ,raking the joints backing the surface finishing to correct lines, levels plumb curing as required ., providing and laying 12 mm thick cement plaster 1/4 - 1 cement / 4 fine sand with a floating coat of neat cement punning with redoxided powder all complete as per specification. all materials including cement etc. to be supplied by the contractor., providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron - y shaped placed 2.4 m or 3.00 m apart and with 9 horizontal r.b.t. reinforced barbed wire, stud tied with g.i. staples and g.i. clips to retain horizontal, including necessary bolts or g.i. barbed wire tied to angle iron, all complete as per direction of engineer in charge, with reinforced barbed tape (r.b.t.) / spring core (2.5mm thick) wire of high tensile strength of 165 kg per sq. mm with tape (0.52 mm thick) and weight 43.478 gm per metre (cost of m.s. angle, c.c. blocks shall be paid separately) ., finishing walls with premium acrlic smooth exterior paint - whether coat with silicone additives of required shade - new work - two or more coats applied at the rate 1.43ltr per 10 sqm over and including priming coat of exterior primer applied at the rate 2.20 kg per 10 sqm as approved by engineer in charge, providing and fixing g.i chain link fabric fencing of required width in mesh size 50 x 50 mm including straightening with 2 mm dia wire or nuts. bolts and washers as required complete as per the direction of engineer in charge. made of g i wire of dia 4mm ., supplying and laying painting with synthetic enamel paint / over two coats primer of approved brand and manufacturer two or more coats ., steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and two coat of synthetic enamel paint including welding and bolted with special shaped washers, locking arrangement etc. all complete. hot finished welded type tubes for single and double leaf entrance gates. size of gate - 3.50 m x 1.80 m -3 nos. size of gate - 1.20 m x 1.80 m -8 nos., transportation of building rubbish from working site to other area upto 2 km by mechanical transport including loading unloading and lift upto 2.20 m disposal of same to be leveled and neatly dressed as per instruction of engineer in charge ., transportation of excavated earth from working site to other area load upto 1 km by mechanical transport including loading unloading and lift upto 2 20 m disposal earth to be levelled and neatly dressed as per instruction of engineer in charge, surface dressing of the ground including removing vegetation and inequalities, clay etc., not exceeding 15cm deep and disposal of rubbish lead upto 500 m and lift upto 1 km, cleaning jungle including uprooting of rank vegetation , grass , brush wood ,trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50m outside the periphery of the area cleared., providing and applying priming coat with ready mixed wood/ iron primer of approved brand (asian/berger/nerolac/ ici dulux) - iron work

Agency / Dept :

uranium corporation of india limited UCIL

Due Date :

Sep 18, 2026 (6 days left)

Tender Value :

5.52Cr

View Documents

T18 Ref No : 17207971

Location : gurdaspur , punjab

Source : GEM Tenders

LIVE TENDER

tender for cnc router machine working on glass wood mfd acp sheet acrylic sheet hardwood 2d or 3d carvings machine power 5kw , cnc controller machine bits and cutting tools , manual hinge boring machine max drilling depth 0 to 50 mm number of spimdles 3 motor power 2 hp motor , chain saw electric , training for cnc and boring machine 4 week, cnc machine, cnc router machine working on glass wood mfd acp sheet acrylic sheet hardwood 2d or 3d carvings machine power 5kw, cnc controller machine bits and cutting tools, manual hinge boring machine max drilling depth 0 to 50 mm number of spimdles 3 motor power 2 hp motor, chain saw electric, training for cnc and boring machine 4 week

Agency / Dept :

indian army

Due Date :

Sep 21, 2026 (9 days left)

Tender Value :

15L

View Documents

T18 Ref No : 17096233

Location : jodhpur , rajasthan

Source : GEM Tenders

LIVE TENDER

corrigendum tender for tachometer digital , tong tester clamp meter , megger insulation tester , 3- point d.c. starter , 4- point d.c. starter , wheatstone bridge , single phase variable auto transformer , phase sequence indicator , growler , ac starters 1 each , function generator , electric soldering iron , discrete component trainer , domestic appliances 1 each , oil testing kit , inverter with battery , voltage stabilizer , dc power supply , desktop computer , transformer single phase 1 kva , ceiling fan coil winding machine , ev charger 3 phase , plumb bob , set of rowel punch , conduit pipe cutting and threading machines adjustable , conduit pipe bending machine,suitable , torque wrench , solid state solar based single phase , 3 phase kw meter digital , meter reading instrument mri , wire stripper , bus bar bending machine , bldc motor with controller , servo motor with resolver , pmsm with controller , current transformer , potential transformer , solar panel with battery , mppt based charge controller , digital timer on delay and off delay 230v 1 each , impulse relay , dusk and dawn switch , inkjet laser printer , motor-generator ac to dc , d.c. compound generator , dc compound motor with starter and switch , motor generator dc to ac set consisting of , ac squirrel cage motor with star delta starter , ac phase- wound slip ring motor with starter switch , universal motor with starter switch , synchronous motor with accessories like starter, excitation arrangements , thyristor igbt controlled d.c. motor drive with tacho-generator feedback arrangement , thyristor igbt controlled a.c. motor drive with , electrical machine trainer , pillar electric drill machine motorized , motorised bench grinder , a.c. series type motor , single phase capacitor motor with starter switch , manual motor coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter single phase , smart meter 3 phase , bus bar punching machine , rawal tool holder and bit , scriber , foot print grip , spirit level , forge with hand blower , tower ladder on type wheels , portable extension ladder , solar street light , solar traffic light , solar dc pump , motion detector , single phasing preventer , solar street light lamp set , d.c. compound motor with control panel , d.c. shunt motor , d. c. series motor , mg set , cctv camera kit , ups with battery , lcd led projector , dmx controller , field regulator , working bench , wiring board , instructors table , instructors chair , metal rack , lockers with drawers 10 drawer , almirah , black board white board , fire extinguisher co2, 2 kg , fire buckets , student table , student stool , gi pipe bending machine 19 mm to 32 mm , battery charger, 0 - 6 - 9 - 12 - 24 - 48 v, 30 amp , battery charger 15 volts, current controlled , hammer ball peen 250gm , ac starters , automatic reverse forward starter , single phase k.w.h meter digital 5a, 250 v a. c , three phase k.w.h meter digital 25a, 415 v a. c , a.c. voltmeter , milli voltmeter centre zero analog , ammeter mc analog , ac ammeter mi , ammeter mc analog, portable box type housed in bakelite case 0-25 a , ammeter m.c. centre zero 5-0-5amp , crimping tool hydraulic 16-300 sq, lab of electrician and wireman, measuring steel tape, combination plier insulated, screwdriver insulated, pliers long nose insulated, heavy duty screwdriver insulated, screw driver, terminal screw driver, pliers side cutting insulated, punch centre, knife double bladed electrician, neon tester, steel rule, hammer, cross peen with handle 250gm, hammer, ball peen with handle, pincer, c- clamp, d.e. metric spanner double ended 6 - 32 mm, spanner adjustable drop forged, spanner set de, blow lamp brass one litre, chisel firmer with wooden handle, allen key alloy steel, grease gun, bradawl, pully puller with 3 legs 150 mm and 300 mm, bearing puller inside and outside, hand vice, pipe vice cast iron with hardened jaw open type- 100 mm, table vice-100 mm, bench vice-150 mm, crimping tool 1 each, hydraulic crimping tool for ug cable, wire cutter and stripper, mallet hard wood, hacksaw frame, try square-150 mm blade, outside calliper inside calliper 1 each, divider, tweezers, drill s.s. twist block, gauge, wire imperial stainlees steel marked in swg and mm, file half round, file flat, file half round 2nd cut, copper bit soldering iron., de soldering gun, contactor and auxiliary contacts, contactor and auxiliary contacts, limit switch, rotary switch, electromagnetic cutout relay 1 each, portable electric drill machine, cordless drilling machine, load bank heater type, pvc pipe bending spring, brake test arrangement with two spring balance rating, out side micrometer, knife switch dpdt fitted with fuse terminals, knife switch tpdt fitted with fuse terminals, rheostat sliding type, rubber mat, safety belt, ohm meter series type and shunt type, portable box type, multi meter, multifunction meter, voltmeter m.c., ammeter m.i. 0-5 amp, digital wattmeter, power factor meter, frequency meter, lux meter, tachometer digital, tong tester clamp meter, megger insulation tester, 3- point d.c. starter, 4- point d.c. starter, wheatstone bridge, single phase variable auto transformer, phase sequence indicator, growler, ac starters 1 each, function generator, electric soldering iron, discrete component trainer, domestic appliances 1 each, oil testing kit, inverter with battery, voltage stabilizer, dc power supply, desktop computer, transformer single phase 1 kva, ceiling fan coil winding machine, ev charger 3 phase, plumb bob, set of rowel punch, conduit pipe cutting and threading machines adjustable, conduit pipe bending machine,suitable, torque wrench, solid state solar based single phase, 3 phase kw meter digital, meter reading instrument mri, wire stripper, bus bar bending machine, bldc motor with controller, servo motor with resolver, pmsm with controller, current transformer, potential transformer, solar panel with battery, mppt based charge controller, digital timer on delay and off delay 230v 1 each, impulse relay, dusk and dawn switch, inkjet laser printer, motor-generator ac to dc, d.c. compound generator, dc compound motor with starter and switch, motor generator dc to ac set consisting of, ac squirrel cage motor with star delta starter, ac phase-wound slip ring motor with starter switch, universal motor with starter switch, synchronous motor with accessories like starter, excitation arrangements, thyristor igbt controlled d.c. motor drive with tacho-generator feedback arrangement, thyristor igbt controlled a.c. motor drive with, electrical machine trainer, pillar electric drill machine motorized, motorised bench grinder, a.c. series type motor, single phase capacitor motor with starter switch, manual motor coil winding machine, primary current injection set, stepper motor with digital controller, shaded pole motor, smart meter single phase, smart meter 3 phase, bus bar punching machine, rawal tool holder and bit, scriber, foot print grip, spirit level, forge with hand blower, tower ladder on type wheels, portable extension ladder, solar street light, solar traffic light, solar dc pump, motion detector, single phasing preventer, solar street light lamp set, d.c. compound motor with control panel, d.c. shunt motor, d. c. series motor, mg set, cctv camera kit, ups with battery, lcd led projector, dmx controller, field regulator, working bench, wiring board, instructors table, instructors chair, metal rack, lockers with drawers 10 drawer, almirah, black board white board, fire extinguisher co2, 2 kg, fire buckets, student table, student stool, gi pipe bending machine 19 mm to 32 mm, battery charger, 0 - 6 - 9 - 12 - 24 - 48 v, 30 amp, battery charger 15 volts, current controlled, hammer ball peen 250gm, ac starters, automatic reverse forward starter, single phase k.w.h meter digital 5a, 250 v a. c, three phase k.w.h meter digital 25a, 415 v a. c, a.c. voltmeter, milli voltmeter centre zero analog, ammeter mc analog, ac ammeter mi, ammeter mc analog, portable box type housed in bakelite case 0-25 a, ammeter m.c. centre zero 5-0-5amp, crimping tool hydraulic 16-300 sq mm

Agency / Dept :

department of technical education DTE

Due Date :

Sep 14, 2026 (2 days left)

Tender Value :

Refer Document

View Documents

T18 Ref No : 16324942

Location : tonk , rajasthan

Source : GEM Tenders

tender for multipurpose wood working machine (q3)

Agency / Dept :

indian council of agricultural research ICAR

Due Date :

Aug 03, 2026

Tender Value :

1.5L

View Documents

T18 Ref No : 16642152

Location : hoshangabad , madhya pradesh

Source : GEM Tenders

tender for multipurpose wood working machine (q3)

Agency / Dept :

security printing and minting corporation of india ltd SPMCIL

Due Date :

Sep 03, 2026

Tender Value :

Refer Document

View Documents

T18 Ref No : 16725475

Location : raiganj , west bengal

Source : GEM Tenders

tender for car jet washer , cut section model of mock layout of a motor car electrical system , cut section working model of automatic transmission gear box , demonstration board of electronic ignition system ignition coil , demonstration board of mpfi system , functional experiment model of different type of sensors , working model of power windows , working model of torque converter , air conditioned crdi vehicle in running condition lmv , automotive exhaust 5 gas analyser and diesel smokemeter , diesel engine crdi 4 strokefor , multi scan tool , spring tension tester , working condition of diesel engine crdi 4 stroke engine , cut section of 4 or 6 cylinder diesel engine , air bag simulator , air conditioning service unit car , four stroke petrol engine with cng setup , heavy commercial vehicle , tube and tyre vulcanizing machine , wheel alignment machine computerized 3d , working condition of petrol mpfi engine , working condition of electric vehicle car , sewing machine , over lock machine 3 thread , double needle machine , button hole machine , button sewing machine , auto level , plane table with stand accessories and water proofing cover , dgps , hand gps , echo sounder , hp torch , flash back arrester torch mounted , flash back arrester cylinder mounted , multiangle magnetic clamp set , pedestal grinder , bench grinder , oxy acetylene gas cutting blow pipe , plane table , dumpy level with all accessories , digital theodolite , hand held gps , ev charger , ev charger home , tenoning machine single ended , universal wood working machine , band saw machine with provision , small type compressor with spray painting system, boq of mmv st special repair wld dmc ele wwt, as pe specification

Agency / Dept :

department of industrial training

Due Date :

Aug 27, 2026

Tender Value :

Refer Document

View Documents

T18 Ref No : 16988742

Location : raiganj , west bengal

Source : GEM Tenders

corrigendum tender for car jet washer , cut section model of mock layout of a motor car electrical system , cut section working model of automatic transmission gear box , demonstration board of electronic ignition system ignition coil , demonstration board of mpfi system , functional experiment model of different type of sensors , working model of power windows , working model of torque converter , air conditioned crdi vehicle in running condition lmv , automotive exhaust 5 gas analyser and diesel smokemeter , diesel engine crdi 4 strokefor , multi scan tool , spring tension tester , working condition of diesel engine crdi 4 stroke engine , cut section of 4 or 6 cylinder diesel engine , air bag simulator , air conditioning service unit car , four stroke petrol engine with cng setup , heavy commercial vehicle , tube and tyre vulcanizing machine , wheel alignment machine computerized 3d , working condition of petrol mpfi engine , working condition of electric vehicle car , sewing machine , over lock machine 3 thread , double needle machine , button hole machine , button sewing machine , auto level , plane table with stand accessories and water proofing cover , dgps , hand gps , echo sounder , hp torch , flash back arrester torch mounted , flash back arrester cylinder mounted , multiangle magnetic clamp set , pedestal grinder , bench grinder , oxy acetylene gas cutting blow pipe , plane table , dumpy level with all accessories , digital theodolite , hand held gps , ev charger , ev charger home , tenoning machine single ended , universal wood working machine , band saw machine with provision , small type compressor with spray painting system, boq of mmv st special repair wld dmc ele wwt, as pe specification

Agency / Dept :

department of industrial training

Due Date :

Aug 31, 2026

Tender Value :

Refer Document

View Documents

About Government Tenders for Wood Working Machine

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Wood Working Machine. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Wood Working Machine sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Wood Working Machine Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Wood Working Machine, you can build a highly profitable and stable pipeline of government clients.

Wood Working Machine Tender Information Service

Stop wasting time filtering through irrelevant notices. Our Wood Working Machine Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Wood Working Machine Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Wood Working Machine.
Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Tender Bidding Service in Wood Working Machine

Winning a contract for Wood Working Machine depends entirely on how perfectly your technical capabilities match the buyerâs demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18âs Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Wood Working Machine Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Wood Working Machine bids.
Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Wood Working Machine GeM Consultant & Registration Service

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Wood Working Machine. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Wood Working Machine, ensuring maximum search visibility.
OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Wood Working Machine, maximizing your chances of securing L1 status.

Frequently Asked Questions (FAQs) for Wood Working Machine Tenders

How do I find government contracts exclusively matching my work in Wood Working Machine?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Wood Working Machine tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

As an MSME, can I get financial benefits when bidding for Wood Working Machine?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Wood Working Machine, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Wood Working Machine is declared L1 and is generally awarded the contract

Search Tenders

Filters

26Latest Wood working machine Tenders List

Latest Wood working machine Tenders in India – Verified Leads & Real-Time Insights by Tender18

Real-Time Wood working machine Tender Intelligence & Monitoring

Comprehensive Sources of Wood working machine Tenders

Step-by-Step Guide to Participate in Wood working machine Tenders

1. Eligibility & Prequalification

2. Mandatory Documentation Checklist

3. BOQ Analysis & Financial Bidding

Why Tender18 is a Trusted Platform for Wood working machine Tenders

✔ Proven Expertise in Government Procurement

✔ Verified & Reliable Data

✔ Advanced Filtering Tools

✔ Corrigendum & Update Tracking

✔ Historical Data Insights

✔ End-to-End Bidding Support

Growth of Wood working machine Sector in 2026

Frequently Asked Questions (SEO Optimized)

How can I get daily Wood working machine tender alerts?

Is EMD mandatory for all Wood working machine tenders?

What is the difference between a Wood working machine work tender and supply tender?

Can I access private Wood working machine tenders on Tender18?

Get Expert Support for Wood working machine Tenders

Unlock Full Tender Access

Unlock Full Tender Access

Unlock Full Tender Access

About Government Tenders for Wood Working Machine

Work Dynamics in the Wood Working Machine Sector

Wood Working Machine Tender Information Service

Deep Technical Insights & Documentation For Wood Working Machine Tenders

Tender Bidding Service in Wood Working Machine

Flawless Compliance & Portal Execution For Wood Working Machine Tenders

Wood Working Machine GeM Consultant & Registration Service

Expert Profile Management & Catalogue

Strategic Live Bid Participation

Frequently Asked Questions (FAQs) for Wood Working Machine Tenders

How do I find government contracts exclusively matching my work in Wood Working Machine?

Do I need specific testing or quality certificates to apply for these contracts?

What is a BOQ and why is it important for my bid?

Are samples required to be submitted physically before the digital bid opens?

How does the Dedicated Tender Expert from Tender18 help me?

What is the role of a Digital Signature Certificate (DSC)?

As an MSME, can I get financial benefits when bidding for Wood Working Machine?

Why should I list my services or products on GeM for this category?

What makes Tender18 a reliable GeM support partner?

What does "L1" mean in these government contracts?

GeM Registration & Consultant Services By State

GeM Registration & Consultant Services By City

Tender Bidding Service & Consultancy By Authorities

Explore Government Tenders and GeM Portal Blogs