sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

359Latest Weight plates Tenders List

Latest Weight plates Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Weight plates tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Weight plates tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Weight plates Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Weight plates tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Weight plates Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Weight plates Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Weight plates Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Weight plates tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Weight plates Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Weight plates sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Weight plates tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Weight plates tenders.

Is EMD mandatory for all Weight plates tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Weight plates work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Weight plates tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Weight plates Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17566308
Location : jammu , jammu & kashmir
Source : GEM Tenders
NEW TENDER
tender for cross trainer , exercise cycle , leg extention and curl machine , olympic flat bench , adjustable bench , abdominal crunch machine , smith machine , dumbbell stand , t-bar row machine , hyper extension machine , hip abductor and adductor machine , olympic barbell rack , rubberised dumbbells 12.5 kg , rubberised dumbbells 17.5 kg , rubberised dumbbells 22.5 kg , rubberised dumbbells 30 kg , rubberised dumbbells 35 kg , rubberised weight plate 5 kg , rubberised weight plate 7.5 kg , rubberised weight plate 10 kg , rubberised weight plate 15 kg , barbell rod curl 3 ft , barbell rod straight 3 ft , barbell rod straight 5 ft , barbell rod straight 7 ft , foam roller , medicine ball , triceps rope cable attachment , straight bar cable attachment , weight locking pin , v grip cable attachment , pec fly rear delt machine , wrist curl machine , heavy duty commercial treadmill , dip chin assist, (i) resistance levels- opt for machines offering at least 40 resistance levels to accommodate a wide range of workout intensities. (ii) stride length- a stride length of 19 inch to 22 inch ensures a natural and comfortable motion suitable for users of varying heights. (iii) flywheel weight- a heavier flywheel, such as 10kg to 14.2 kg, provides smoother and more stable movement (iv) power source- consider self-generating models to reduce electricity usage and allow placement flexibility (v) console features- look for a 15.6 inch tft touch screen with wi-fi connectivity, offering interactive programs and entertainment options (vi) connectivity options- ensure the machine includes bluetooth connectivity, speakers, and mobile phone holders for user convenience (vii) maximum user weight- a capacity of up to 180kg indicates a robust and durable construction suitable for commercial use (viii) dimensions- a footprint of approximately 217cm (l) x 71cm (w) x 163cm (h) ensures stability and accommodates various user sizes, (i) type- commercial grade upright or magnetic exercise cycle suitable for heavy-duty gym use. (ii) frame material- heavy duty steel frame with powder coated anti-rush finish. (iii) resistance system- magnetic resistance system with minimum 8 resistance levels and smooth operations. (iv) drive mechanism- belt driven system for noiseless and low maintenance performance. (v) flywheel- precision balanced flywheel pf minimum 8 kg for stable cycling motion. (vi) display console- led display showing time, speed, distance, calories and pulse. (vii) user capacity- minimum user weight capacity of 120 kg or above. (viii) seat and pedals- adjustable cushioned seat with anti-skid pedals and foot straps., (i) frame construction- heavy duty 11-gauge steel tubing with powder coated finish for durability and stability (ii) seat and backrest- adjustable backrest and seat angle to align the user knee with machine pivot for optimal biomechanics (iii) adjustment features- high density foam rollers and sweat resistant pu leather pads for comfort and long term use (iv) padding and upholstery- high-density foam padding with sweat-resistant, anti-tear pu leather covering for user comfort and longevity. (v) weight stack- comes with a reflectorized weight stack, steel weight with magnetic selector pin (100-120kg) (vi) range of motion- engineered cam system for consistent resistance and smooth leg extension as well as leg curl across full motion path., (i) frame construction- made from heavy duty 11-gauge steel (3 mm thick), rectangular or oval tubing (usually 50 x 100 mm) powder coated finish for rust, sweat and scratch resistance. (ii) bench platform- fixed flat bench with ipf - standard height (42-45 cm from floor). high-density foam padding covered in anti - microbial sweat - resistant pu leather. (iii) barbell holders- dual height bar catches for easy re-racking, made of steel with uhmw inserts to protect bar knurling. distance between uprights should be 110-120 cm, suitable for standard olympic bars. (iv) spotter platform- integrated rear platform or elevated standing area for spotters (on premium models). provided stability and safety during heavy lifts. (v) safety armsor spotter catches adjustable sporting arms or crash bars available in some models for added safety. protect lifter in case of failed rep. (vi) weight plate storage- 4-6 integrated olympic plate storage pegs (50 mm) with rubber stops for silent racking. pegs are evenly spaced for balance and easy access. (vii) dimensions- length- 160 - 180 cm , width - 120 - 140 cm, height - 120 - 140 cm (viii) stability features- wide base and rubber feet ensure no wobble during heavy pressing. (ix) max weight capacity- rated to withstand 500- 700 kg including user plus barbell weight. should be suitable for advanced lifters and competitive training., (i) construction and frame- built with 11-gauge steel (3 mm thick), using rectangularor oval tubing (usually 50x 100 mm), powder coated finish for rust, sweat and scratch resistance (ii) backrest adjustability- 7 to 9 positions from decline (-10 degree) to upright (85 degrees), laser cut or pin locking ladder system for secure angle transitions (iii) seat adjustability- 2-3 adjustable positions to prevent sliding during incline presses, quick pop pin or ladder lock mechanism (iv) padding- high density foam padding covered with sweat-resistant pu leather, dual stitched seams for durability and comfort (v) weight capacity- supports 400-500kg (including user and weight), ideal for heavy dumbbell work or barbell workout (vi) mobility- rear support wheels and front handle grip for easy movement, rubber feet ensure stability and protect floors (vii) footprint- length- - 120 - 130 cm, width- - 55 - 60 cm, height- - 45 cm (viii) backrest width- optimal width around 28-30 cm to allow full scapular movement during presses, (i) type- commercial grade abdominal crunch machine suitable for institutional and gym use. (ii) frame material- heavy-duty steel frame with powder coated anti-rust finish. (iii) weight stack- minimum 60-80 kg weight stack with safety selector pin arrangement. (iv) seat and padding- high-density foam seat and backrest with durable sweat resistant upholstery. (v) adjustment mechanism- adjustable seat and arm position for different user heights. (vi) cable and pulley system- heavy duty nylon coated cables with precision pulley system for smooth movement. (vii) grip handles- ergonomic anti-slip handles for comfortable and secure grip. (viii) user capacity- minimum user weight capacity of 120 kg or above., (i) frame and construction- built with 11-gauge heavy duty steel frame with 50 x 100 mm oval tubing, coated with electrostatic powder finish for rust, sweat, and corrosion resistance (ii) guide rod system- stainless steel linear guide rods (25-30mm dia.) with ultra-smooth linear bearings for frictionless barbell movement, allows vertical movement only, improving safety and targeting muscles precisely (iii) barbell specifications- integrated olympic bar (20kg) with knurled grip zones, rated to handle 300-350kg of weight, chrome plated finish for durability (iv) safety features- sprig loaded safety stoppers at multiple heights for secure reracking, twist rock mechanism to lockorunlock bar instantly with wrist rotation (v) weight plate storage- 4-6 olympic plate holders (50 mm dia.), rear mounted for convenience and space efficiency, rubber bumpers to reduce noise and protect plates. (vi) dimensions- length 210 cm, width 130 cm, height 230 cm, designed to fit most commercial gym spaces (vii) user capacity and usage- max user weight + load 400-450 kg, suitable for squats, presses, lunges shrugs, and rows with guided control and stability (ix) accessories and add-ons- comes with j- hooks, barbell locks and rubberized foot stabilizers for floor grip and equipment balance, (i) dimensions (l x w x h)- 175 x 81 x 92 cm (ii) pipe size- 100 x 50 x 2.5 mm (iii) paint finish- electrostatic powder coating for durability and corrosion resistance (iv) design- three tier design to accommodate multiple pairs of dumbbells efficiently, (i) type- commercial grade plate loaded t-bar row machine without weight plates. (ii) frame material- heavy duty steel frame with powder coated anti-rust finish. (i) construction- robust and stable structure suitable for heavy-duty institutional gym use. (iv) handle design- multi-grip ergonomic handles with anti-slip coating for comfortable grip. (v) weight loading system- compatible with standard olympic plates. (vi) movement mechanism- smooth pivot movement with high strength bearing system. (vii) user capacity- minimum user weight capacity of 120 kg or above., (i) type- commercial grade back extension machine suitable for institutional gym use. (ii) frame material- heavy-duty steel frame with powder coated anti-rust finish. (iii) padding and upholstery- high-density foam padding with durable sweat resistant upholstery. (iv) adjustment mechanism- adjustable thigh pad and support positions for different user heights. (v) foot support- anti-skid foot platform with secure leg support arrangement. (vi) construction- stable and heavy duty design for continuous commercial usage. (vii) grip handles- ergonomic anti-slip handles for safe and comfortable exercise. (viii) user capacity- minimum user capacity of 120 kg and above., (i) frame construction- heavy duty 11-gauge steel tubing with powder coated finish for durability and stability (ii) dual functionality- single machine allows both hip abduction and adduction exercises via simple position adjustment (iii) adjustable start position- multiple start positions and range settings to accommodate user flexibility and control exercise intensity (iv) padding and comfort- high density foam thigh pads and seat with sweat resistant, tear proof upholstery for maximum comfort during inneror outer thigh movement (v) weight system- standard 100kg to 120 kg steel weight with magnetic selector pin, shielded stack for safety and noise reduction (vi) ergonomic design- seated posture with back support and aligned pivot points ensures proper biomechanics and muscle isolation, (i) frame and material- built with 11-gauge steel (3 mm thick), using rectangularor oval tubing (usually 50x 100 mm), heavy duty welded frame for maximum rigidity, powder coated finish for rust, sweat and scratch resistance (ii) design type- vertical barbell rack, can hold 8-10 olympic barbells depending on model (iii) bar holders- 50mm dia. sleeves with rubberized inserts to protect bar knurling and reduce noise (iv) weight capacity- each holder supports bars weighing up tp 20-25 kg safely, overall rack capacity often exceeds 200kg (v) dimensions- length and height vary by model but typically compact to fit gym spaces efficiently, base equipped with rubber feet for floor protection and stability, (i) core material- solid cast iron core for durability and consistent weight (ii) rubber coating- thick high quality non-marking rubber coating that protects floors, reduces noise, and resists cracking (iii) handle design- ergonomic chrome or stainless steel handle with knurled grip for secure, comfortable hold, handles designed to prevent hand slippage during sweat (iv) weight range- weights and quantity to be provided as asked by the buyer (v) shape and stability- hexagonal heads to prevent rolling, balanced design to ensure even weight distribution (vi) markings- weight values clearly printed on each head for easy identification, (i) core material- made from high density cast iron or steel core for durability and accuracy (ii) rubber coating- thick high quality non-marking rubber coating that protects floors, reduces noise, and resists cracking (iii) hole diameter- standard 50mm (olympic) centre hole to fit olympic bars (iv) weight accuracy- precision weight tolerance within +- 1 to 2 % to ensure training consistency (v) shape and texture- round, flat plates with textured or smooth surface for easy handling and stacking (vi) markings- weight clearly embossed in kg on each plate, (i) material and construction- made from tensile alloy steel with a tensile strength of 150000 psi or more for durability and flexibility (ii) dimensions- diameter of standard olympic bar, length and shape should be as required by user (iii) sleeve and rotation- needle or ball bearing sleeves for smooth rotation, reducing breast and elbow strain (iv) knurling- aggressive but comfortable knurling pattern for grip, centre knurling present on men bar for better stability during squats (v) weight capacity- rated to hold up to 680kg (vi) finishing- finished with black oxide chrome or stainless steel for corrosion resistance and aesthetics, (i) material- made from high density eva foam or expanded poly polypropylene for durability and firmness (ii) size and dimension- typical length 30-45 cm, diameter 12-15 cm (iii) texture- smooth or riggedor texture surface to target muscle notes to improve blood flow (iv) durability- retains shape after repeated use, resistant to cracking and deformation (v) weight and portability- lightweight and easy to carry, fits in gym bags, (i) material- made from durable rubber, leather or synthetic leather with textured surface for grip (ii) size and diameter- diameter range from 20 - 35 cm depending on weight (iii) construction- filled with gel for even weight distribution and controlled bounce (iv) durability- designed to withstand repeated impact and throwing, (i) material- heavy duty braided for durability and resistance to fraying (ii) length- standard length of 36-40 cm for full extension and range of motion (iii) end stoppers- thick rubber or polymer ends to ensure secure grip and prevent slipping (iv) attachment loop- chrome plated steel connector loop for easy clipping onto cable machines (v) grip comfort- ergonomic design allows for comfortable, slip resistance grip during intense sets, (i) material- solid steel construction with chrome or black oxide finish for corrosion resistance (ii) length- 18 - 24 inches for controlled grip width (iii) grip surface- knurled and rubber coated grip for secure non-slip handling (iv) rotation- swivel attachment for smooth movement during curls and pushdowns, (i) material- made from hardened steel with corrosion resistant coating (ii) design- spring loaded or clip style pin for quick and secure locking (iii) size- fits standard olympic bars and machines with 25-50 mm diameter holes (iv) strength- engineered to withstand heavy loads without banding or slipping (v) grip- ergonomic handle or ring for easy insertion and removal (vi) usage- used to secure plates on bars or adjust machine settings safely, (i) material- solid steel construction with chrome or powder coated finish for corrosion resistance (ii) design- angled v shape encourage natural hand positioning and reduce joint strain (iii) grip surface- knurled and rubber coated grip for secure non-slip handling (iv) width- standard grip of 20-25 cm for close grip exercise (v) rotation- central rotating eyelet for fluid cable movement during pull and row exercises., (i) dual functionality - combines pec deck (chest fly) and rear delt fly in a single unit to target both chest and posterior shoulder muscles. (ii) adjustable arm movement - rotating swing arms allow multiple start positions for both exercises. (iii) weight stack- standard 100 kg to 120 kg steel weight with magnetic selector pin, shielded stack for safety and noise reduction (iv) build quality- heavy duty 11- gauge steel frame with 50 x 11 mm oval tubing, anti-rust powder coating finish for long term durability (v) cables and pulleys- american loos 5.7 mm steel cable, tested for 3500 lbs breaking strength, aluminium or fiberglass reinforced pulleys with sealed bearing for smooth operation (vi) seat and back rest- adjustable seat height via gas spring, upholstery made from sweat-resistant, double-stitched pu leather for durability and hygiene. (vii) biomechanics- handles and pivot points aligned for natural joint motion, fixed or pivoting handle with ergonomic rubber grip (viii) footprint- dimensions- length- 140 cm, width- 110 cm, height- 200 cm (ix) user weight capacity- supports up to 150-180 kg user weight, making it suitable for all commercial settings, (i) equipment type- plate-loaded wrist curl machine. (ii) purpose- strengthening forearm flexor and extensor muscles, improving wrist strength, grip strength, and habitation. (iii) dimensions- (approx) length -47 cm, width - 62 cm, height - 100 cm. (iv) resistance system- pin loaded weight stack with magnetic selector pin. (v) handle material- chrome-plated steel handle with non-slip knurled grip. (vi) exercise (arm) pad- high density foam padding with durable pu leather upholstery. (vii) frame material- heavy-duty ms steel tubing, minimum 50 x 100mm, 3 mm thickness or better. (viii) pulley system- high-strength nylon pulleys with selected precision bearing. (ix) cable- aircraft-grade steel cable with minimum breaking strength of 10000 kg or higher. (x) guide rods- hard chrome plated solid steel guide rod. (xi) adjustment- ergonomic arm support suitable for different user height. (xii) maximum user weight- minimum 150 kg. (xiii) base- heavy-duty frame with anti-slip rubber feet for stability. (xiv) safety features- fully enclosed weight stack, magnetic selector pin with lanyard, and safety end stops. (xv) accessories- exercise instruction play card, magnetic selector pin, rubber floor protector, assembly hardware. (xvi) warranty- frame minimum 5 years, - weight stack pulleys, cables and bearings minimum 2 years. - upholstery and grips minimum 2 years, (i) ac driving system with adjustable variable frequency. (ii) 4.0 hp ac continuous (8.0 hp peak) motor. (iii) 22 inch x 62 inch running surface. (iv) speed 0.8 to 24 kmph. (v) precise incline control from -3 to 15 percent. (vi) unique -3 percent declinable deck. (vii) display- dot matrix high brightness led workout profile window and independent control panel with touch sensor buttons. (viii) direct speed & incline keys on the console. (ix) programs- 6 pre-set program group - goal x 3, hrc, physical test x 3, program x 5 , training, fat test. (x) extra heavy duty steel base with aluminium aide rail. (xi) 8 pcs high density rubber elastomer cushioned deck gives user at most comfort. (xii) smart lubrication free deck - patented design2 ly heavy commercial grade belt. (xiii) large sized twin cup holder with a built in tray. (xiv) emergency stop button. (xv) sweat proof console design. (xvi) maximum user weight- 180 kg. (xvii) iso certified and warranty 5 yrs., (i) type- commercial/ institutional seletorized strength-training machine. (ii) function- assisted dip and chin-up. (iii) station 2 exercise functions- dip chin assist. (iv) resistance system selectorized weight stack. (v) weight stack- 100 kg. (vi) main frame- heavy duty oval steel tube. (vii) main tube- 50x120mm oval tube. (viii) base tube- 50x100 mm oval tube. (ix) frame material- mild steel , heavy-duty steel construction. (x) frame finish- durable powder-coated finish. (xi) shroud/ guard- steel shroud cover for protection of moving/weight-stack components. (xii) upholstery- ergonomic commercial-grade upholstery with double stitching. (xiii) padding- comfortable high-density foam padding. (ix) handles- dip and chin-up handles with dipped/pvc grip. (x) assistance pad- padded assisted knee/plate form arrangement. (xi) cable and system- heavy-duty steel cable system suitable for commercial use. (xii) pulley system- heavy duty pulley arrangement for smooth cable movement. (xiii) bearing- sealed/self-lubricating bearing for smooth operation. (xiv) weight selection- selection-pin based resistance adjustment. (xv) floor protection- round rubber floor protectors for stability and grip. (xvi) dimensions- 188cm (l) x 123.3cm (w) x 215.3cm (h). (xvii) intended use- commercial gym, institutional, fitness centre and fitness facilities. (xviii) warranty- minimum 2 year against manufacturing defects. (xix) after sale service- service support and preplacement during warranty period.
Agency / Dept :
indian air force IAF
Due Date :
Oct 12, 2026 (10 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17564445
Location : halol , gujarat
Source : GEM Tenders
NEW TENDER
tender for raw material boq - cassing capping elbow 0.5 inch , radiator flush , cleaning solvent , test lamp , piston oil control ring , cotter pin , valcanising paste , xenon type automotive headlamp bulb 12 v dc , windshield wiper washer nozzle , windshield wiper washer liquid , automotive seat belt bacukle , 4 channel ac running chaser circuit , 12 v dc led light strip , 10k resistor 0.5 watt , plywood laminated sheet 3 mm 2 by feet , rivet 2 mm , bare al wire 8 swg , letheroid paper 5 mill , wire wound resistor 10 ohm , 100w , wire wound resistor 4.7 kohm , 220w , wire wound resistor 2.2 kohm , 220w , transformer 6-0-6 v , transformer 12-0-12 v , transformer 18-0-18 v , bc 558 transistor , fet bf w-11 , transistor bd 135 , transistor bd136 , transformer 7.5-0-7.5 v , transistor 2n3055 , diode 5402 , battery 6v , 10 ah , dynamo motor 12v dc , dc lamp 6v , 1w 150ma , diode in 4002 , invertor transformer 6-0-6 v , battery 24 v dc , hooter 24 v , eol resistor 4k7 , convectional fire alarm system with panel 230 v ac, 50 hz , manual call point mcp station suitable for 24 v dc conventional fire alarm system , draw spring wire 10 mtr , split cable plate 4 by 6 inch , gromet , low voltage track channel , carbon resistor 0.25 w , 82 ohm , nomex paper 2 mm , touch based smart switch with sensing capacity and remote controll 3 module 250 v , 2 pin top 6a , m s round bar 10 mm , fluorscent tubelight complete set , hpmv lamp 250 watt , metal halide lamp 150 w , gi wire 6 mm , ms channel 75 by 40 mm , m s angle l 25 by 25 by 3 mm , differencial oil sae 80w 90 api gl 5 , light fan remote controll switching system with remote , cable entry plate 8 by 4 inch , hpmv lamp holder 230 v ac, 50 hz , metal halide lamp ballast 150 w , metal halide lamp holder , 230 v suitable for 150 w , hpsv ignitor 400w , bc 107 transistor , ic lm 317 t , scr c 106 d , diac db3 , fiber wedges , m s round bar 12 mm , hpmv lamp ignitor , fish wire 15 mtr , ms round bar 6 mm , die penetrating testing kit for detection of surface- breaking cracks, porosity, laps and other surface discontinuities , tig welding m.s filler rod 1.6 mm , letheroid paper7 mill , 220 v to 5v dc convertor , s s slide drawer channel 12 inch , 2 way push connector , g-section wiring channel , thickness 1.2 to 2 mm , pvc ferrul 6 mm , strain relief plate 6 grrove , spiral binding tape , cable binding straps and button , pvc cap for miniature lamp , 6v , 4 channel sequencial controller cum chaser 500w , fluorscent lamp 15w , 230 v red,yellow,geen,blue , panel board led indicator lamp digital suitable for 230 v ac, 50 hz , voltage meter indicator led panel mount digital ac voltage indicator , 230 v ac, 50 hz , range 0 to 500 v , 42 mfd capacitor , nvc coil for 15a 440 v contactor , electronic ballast 40 w , pvc cross 0.75 inch , metal halide lamp ignitor suitable for matel halide lamp 150 watt , resistor 1 kohm , 2 watt , resistor 10 kohm , 2 watt , d2822a ic and base pin , add on block 2no 2nc , wiper blade , pvc cassing, bulb 100 watt, laser light pen hand-held, compact, pen-type laser pointer, bulb 60 watt, bulb 200 watt, power steering oil suitable for hydraulic power steering systems of automobiles and training vehicles, resistor box 0.25 watt, diode in 4001, thermister t 320, cement opc 43 grade or simillar, spark lighter hand-operated, push-button,trigger type, wooden gitti rectangular or square block shape, bulb 40 watt, dc lamp 6v 100,ma, dc lamp 6v 300 ma, dc lamp 6v 150 ma, led driver 12 v, transistor 2n2222a, laser diode suitable for pcb/training circuit mounting, resistor 1 kohm , 1 watt, dc lamp 6v 1w , 50ma, flexible conduit pipe 19 mm, solid state metal bridge rectifier 35a , 100v, padent switch 6a, bamboo wages approximately 100 or 150 mm lendth, 0.22 mfd capacitor, 0.33 mfd capacitor, chart hook for hanging training chart, carbon resistor 1 watt, wooden board 2x2 ft, 220 ohm 2 w resistor, cotton tape roll minimum 10 m per roll, sunmica wooden board 24 by 12 inch, auto fuse 5 a, auto fuse 10 a, auto fuse 15 a, auto fuse 20 a, rj 45 connector, diode in 4007, wheel balacing weight 10 gram, wheel balacing weight 15 gram, wheel balacing weight 20 gram, cleaning brush wire high-quality steel wire bristles, nut & bolt m8, nut & bolt m10, nut & bolt m 12, flush type indicator light 6a, dc bulb 12v 9 watt, split bolt connector 4 mm, boot lace ferrul 2.5 mm, bc 548 transistor, solar cell 0.45 v , 125mw, miniature lamp 2w , 330ma assorted color red,yellow,blue, miniature brass holder 6 v, thermostate valve or temperature controll valve approximately 20 degree to 90 degree, battery holder suitable for aa or aaa cells, ldr photoresistor, light-sensitive resistor type, capacitor 100 mfd, cassing capping cross 1/2 inch, cassing capping elbow 1/2 inch, radiator flush suitable for cleaning radiators and automotive engine cooling systems, cleaning solvent ready-to-use liquid cleaning/degreasing solvent, test lamp, piston oil control ring, cotter pin, valcanising paste, xenon type automotive headlamp bulb 12 v dc, windshield wiper washer nozzle, windshield wiper washer liquid, automotive seat belt bacukle, 4 channel ac running chaser circuit, 12 v dc led light strip, 10k resistor 0.5 watt, plywood laminated sheet 3 mm 2 by feet, rivet 2 mm, bare al wire 8 swg, letheroid paper 5 mill, wire wound resistor 10 ohm , 100w, wire wound resistor 4.7 kohm , 220w, wire wound resistor 2.2 kohm , 220w, transformer 6-0-6 v, transformer 12-0-12 v, transformer 18-0-18 v, bc 558 transistor, fet bf w-11, transistor bd 135, transistor bd136, transformer 7.5-0-7.5 v, transistor 2n3055, diode 5402, battery 6v , 10 ah, dynamo motor 12v dc, dc lamp 6v , 1w 150ma, diode in 4002, invertor transformer 6-0-6 v, battery 24 v dc, hooter 24 v, eol resistor 4k7, convectional fire alarm system with panel 230 v ac, 50 hz , compatible with conventional smoke and heat detectors, manual call point mcp station suitable for 24 v dc conventional fire alarm system, draw spring wire 10 mtr, split cable plate 4 by 6 inch, gromet (good-quality epdm, neoprene or equivalent rubber), low voltage track channel, carbon resistor 0.25 w , 82 ohm, nomex paper 2 mm, touch based smart switch with sensing capacity and remote controll 3 module 250 v, 2 pin top 6a, m s round bar 10 mm, fluorscent tubelight complete set, hpmv lamp 250 watt, metal halide lamp 150 w, gi wire 6 mm, ms channel 75 by 40 mm, m s angle l 25 by 25 by 3 mm, differencial oil sae 80w 90 api gl 5, light fan remote controll switching system with remote, cable entry plate 8 by 4 inch, hpmv lamp holder 230 v ac, 50 hz, metal halide lamp ballast 150 w, metal halide lamp holder , 230 v suitable for 150 w, hpsv ignitor 400w, bc 107 transistor, ic lm 317 t, scr c 106 d, diac db3, fiber wedges, m s round bar 12 mm, hpmv lamp ignitor, fish wire 15 mtr, ms round bar 6 mm, die penetrating testing kit for detection of surface-breaking cracks, porosity, laps and other surface discontinuities, tig welding m.s filler rod 1.6 mm, letheroid paper7 mill, 220 v to 5v dc convertor, s s slide drawer channel 12 inch, 2 way push connector, g-section wiring channel , thickness 1.2 to 2 mm, pvc ferrul 6 mm, strain relief plate 6 grrove, spiral binding tape, cable binding straps and button, pvc cap for miniature lamp , 6v, 4 channel sequencial controller/chaser 500w , 230v, fluorscent lamp 15w , 230 v red,yellow,geen,blue, panel board led indicator lamp digital suitable for 230 v ac, 50 hz, voltage meter indicator led panel mount digital ac voltage indicator , 230 v ac, 50 hz , range 0 to 500 v, 42 mfd capacitor, nvc coil for 15a 440 v contactor, electronic ballast 40 w, pvc cross 0.75 inch, metal halide lamp ignitor suitable for matel halide lamp 150 watt, resistor 1 kohm , 2 watt, resistor 10 kohm , 2 watt, d2822a ic & base pin, add on block 2no 2nc, wiper blade, pvc cassing capping patte 0.5 inch 2 meter length
Agency / Dept :
department of employment and training DET
Due Date :
Oct 15, 2026 (13 days left)
Tender Value :
91.03K
View Documents
T18 Ref No : 17567888
Location : kadana , gujarat
Source : GEM Tenders
NEW TENDER
tender for big deep freezer , electric weight machine , gravy machine , dough kneader machine 20l , chapati bhatti big , ss stock pot range single burner , ss stock pot range double burner , gas chulha , lighter , cooker for idli-khamaan etc. with gas burner , cooker 80l , pot rack at least 5 shelf , ss work table with b.s , dish rack-stand , roti bumper - insulated container , rice husker , belan-patia-chakla , knife , chalni-chhalni , bucket , large bowl-donge , doi for tea making , pata-patia for sabji cutting etc , tavita- kharpa-khurpi big size , chimta , chini-grater , bundi jhara , kulvadi jhara , rice jhara , friying pan , parat big size , large tray-patre for sweet , large masala peti , five- compartment steel plate , spoon , steel glass , steel snack dish , stainless steel kamandal , mixer mashin , fodd warmer , bhatiya , steel square box , steel storage container , iron mill , puri frying ladle , base net , rice serving ladle, supply of kitchen equipments and utensils, standard company, two door, deep freezer and bottle cooling, two in one refrigerator, capacity 500 ltr, voltage 220 v-240 v 50 hz cooling gas piping and widing wiring use of copper material, type of cabinet-horizontal, iso 9001 2015, is 1475 is 14201, bis standard, ce rohs certification, 5 to 10 year compressor warranty guaranty and all over body parts two year warranty guaranty, ms gp body, ss platform with a digital instrument panel connected on a vertical stand with a backlit display, isi specified brand and approved by weight and measures department material, legal metrology approval-model approval certificate, standard company 200 kg capacity, bis standard,stamping and calibration certificate, platform size - 600 mm x 600 mm, two to five year warranty guaranty, stainless steel -304, food grade certificate nabl lab approved, motar isi marked and 100 percent copper widing, iso 9001 2015 iso 22000(food safety standard), 3- hp jumbo modal, wt.-40 to 50 kg, capacity 100-150 kg per hour, single phase power, one to two year warranty guaranty, bowl stainless steel -304 material food grade, motar isi standard, iso 90012015 iso 22000 food safety standard, motar- 1.5 hp, weight of machine-135 to 150 kg, capacity - 20 to 25 kg, machine size 44 x 25 x 40, bowl thickness- 1.5 to 2.5 mm, single phase power, one year warranty gauranty, material of puffer - stainless steel -304 food grade,chapati plate-m s material,fual type-lpg, number of burners-3,top shape-rectangle, size- 24-w inch, x 48-l inch, x 32 inch height, , with pipe regulatur,standard company, one year warranty gauranty, stainless steel 304 material food grade, size - 18 inch l. x 18 inch w. x 18 inch height with pipe regulatur standard company one year warranty gauranty, stainless steel 304 material food grade, size - 24 inch l. x 24 inch w. x 18 inch height with pipe regulatur standard company one year warranty gauranty, ms chulha, size- 15 inch l. x 15 inch w. x 12 inch height one year warranty gauranty, size- 18 inch long branded company one year warranty gauranty, stainless steel 304 food grade, per lot 144 piece idli capacity, standard company 12 tray set with idli and khaman tray, single gas burner, one year warranty gauranty, aluminium material capacity- 80 liter, branded company five year warranty gauranty, stainless steel 304 food grade, size - 15 inch depth x 36 inch width x 60 inch height, stainless steel 304 food grade, 4 - foundations with rolling wheel size - 30 inch x 60 inch x 30 inch height, stainless steel 304 food grade, 150 dish storage size - 12 inch depth x 48 inch width x 60 inch height, stainless steel -304 material food grade, double wall insulated roti hot box, capacity- 500 to 800 roti, capacity - 25 ltr, stainless steel 304 material food grade - 18 to 22 guage size- 24 nos, wooden material, center portion thick design-wooden material, size-10 nos, ss material with wooden hendal, total lenth 12 inch, ms galvanized material, size- 5 nos set- 4 peace, balti, ss 304 food grade, size- 3 nos, 10 ltr capacity, stainless steel -304 food grade , bowl-deep design, size- 18 nos with doya serving spoon size- 6 nos set, ss 304 material food grade, size- 10 noc with handle, wooden material, size- 24 inch x 24 inch, stainless steel 304 material food grade, 60 inch lenth, stainless steel 304 material food grade, long size- 25 nos, stainless steel 304 food grade material, 10 inch x 12 inch, 4 - foundations, ms material -16 to 20 guage, standard deisgn with wooden handle, size-24 nos, ms material -16 to 20 guage standard deisgn with wooden handle, size- 24 nos, ms material -16 to 20 guage handle end with wooden design size-24 nos, ms material size- 24 nos approx weight-25 k.g with kada handle par piece approx weight 25 to 35 k.g, stainless steel -304 food grade, size- 40 nos, gauge- 16 to 20, with kada-handle par piece approx weight 11 k.g, stainless steel -304 food grade,material 16 to 20 guage, size- 24 inch x 18 inch x 2 inch depth par piece approx weight 3 k.g, stainless steel 304 food grade, material 16 to 20 -guage, per box capacity- 500gm, 12 box set design total approx weight 12 k.g, stainless steel 304 food grade, size 15 nos, per piece approx- 500 gm weight, stainless steel 304 food grade, per piece approx- 15 to 20 gm weight, stainless steel 304 food grade, 250 ml capacity, per piece approx- 60 to 70 gm weight, stainless steel 304 food grade, size 7 nos per piece approx- 100 gm weight, kamandalset contents single piece material gradess202capacity750 mlfinish polish finish materialstainless steel, powered with a 750-watt motor maximum blend efficiency 4 multipurpose jars, intbuying 6-pot bain-marie buffet food warmer steam table hot well for 6 by 1 by 3 pans, stainless steel -304, 10 to 12 inches,minimum 0.6 mm to 1.0 mm gauge, stainless steel -304,22 gauge,non-toxic, bpa-free, odorless, and dishwasher safe,capacity 50 kg, food grade 304 stainless steel, 0.8mm to 1.2mm sheet thickness, 40 lit capacity,an airtight lid to store grains or water safely,, solid iron 8 inches to 12 inches 1 kg to 2 kg anti-rust coating, stainless steel -304,heavy-duty commercial grade (minimum 1.2 mm to 2 mm thickness),30 cm, stainless steel -304,weight 200g,length 12 cm,coarse medium perforated punched or laser-etched teeth for long, fluffy shreds ideal for doodhi halwa or muthia, stainless steel -304,heavy-duty metal tagari,diameter 2.5 ft,22 gauge
Agency / Dept :
tribal development department TDD
Due Date :
Oct 16, 2026 (14 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17568155
Location : jainti , uttarakhand
Source : GEM Tenders
NEW TENDER
tender for aggregate impact tester with blow counter , compaction factor apparatus , digital concrete test hammer , mould cast iron for 150mm cube with is 10086 certification mark, and base plate , beam mould , curing tank , vernier caliper , digital direct shear test apparatus , discharge over notches apparatus , laboratory electric oven , ductility testing machine , glove, latex rubber , laboratory vane shear apparatus , measuring cylinder, graduated , polycarbonate, capacity 10ml , measuring cylinder, graduated , polycarbonate, capacity 25ml , measuring cylinder, graduated , polycarbonate, capacity 50ml , measuring cylinder,graduated,polycarbonate,capacity 100ml , measuring cylinder, graduated , polycarbonate, capacity 250ml , measuring cylinder, graduated , polycarbonate, capacity 500ml , measuring cylinder, graduated , polycarbonate, capacity 1000ml , muffle furnace , ph meter digital , plastic limit apparatus , ring and ball apparatus , sample enamel tray, size 300x250x40mm , sample enamel tray, size 650x500x50mm , spatula, 100mm blade with wooden handle , spatula, 150mm blade with wooden handle , universal penetrometer with cone and kit for bitumen and soil , vibrating table , vicat apparatus , automatic blaine apparatus , laboratory cement autoclave , weight box 1mg to 500gm , thermometer , serological water bath , stop watch, digital , tap measure 30m long , tap measure 5m long , water still, mounting type , speedy moisture meter, ugip upgradation, as per atc
Agency / Dept :
department of technical education DTE
Due Date :
Oct 16, 2026 (14 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17573139
Location : hyderabad , telangana
NEW TENDER
tender for set of fire retardant and nil abrasion hose pipes, set of fire retardant and nil abrasion hose pipes for alco loco set of fire ret ardant flexible hose pipes with end fittings for alco locos consisting of 05 hoses constru ction: tube- aqp elastomer tube withdimensions id-1/2 inch and od-59/64 inch reinforcement- brass plated steel wire. cover- braided refractory insulation and the aqp elastomer. temp erature range- (-40 to +150 deg.centigrade) specification- fc234-10 aqp saej 1527 uscg end fi ttings- i.s 2062, zinc coated, crimped over hose with dimensions 7/8 inch-14 unf thread. abra sion resistance: - abrasion as per bs en iso 6945:1996. test force (vertical) 25n, 2000 cycles, weight loss - nil. firm's identification and year of manufacture to be embossed on hose (1) fuel oil cross over pipe 1.21 mtrs length -qty-01 no( 2) secondary fuel oil filter to right side fuel oil header 0.91 mtrs length -qty- 01 no( 3) secondary fuel oil filter to regulating valve 0.91 mtrs length - qty-01 no (4)left side fuel oil header to regulating valve 1.52 mtrs length -qty- 01 no (5) fuel booster pump to fuel oil relief valve 1.21 mtrs length -qty-0 1 no. set of n il abrasion flexible hose pipes with female fittings for alco locos consisting of 09 items construction of nstruction: tube-synthetic oil resistant rubber & one cotton braid with dimensions id-1/2 in ch and od-59/64 |nch. reinforcement-one high tensile steel wire braid. cover-synthetic rubb er-abrasion, ozone & weather resistant. temperature range- (-40 to +120 deg.centigrade) sp ecification- sae 100 r5r end fittings- i.s 2062, zinc coated, crimpedover hose with dimensions 7/8 inch-14 unf thread. abrasionresistance: - abrasion as per bs en iso 6945:1996. test force (vertical) 25n, 2000 cycles, weight loss - nil. firm's identification and yfar of manufacture t o be embossed on hose. (1) bubble collector to expansion tank 2.43 mtrs qty-2, nos (2) cce m otor drain to cam gear cover 0.91 mtrs, qty-01 no. (3) cce motor drain to cam gear covers 0. 60 mtrs, qty-01 no. (4) radiator equalising pipe 1.21 mtrs, qty-01 no.( 5) expansion tank no 1 to suction pipe 0.6 mtrs ,qty-01no.( 6) lube oil centrifugf to lube oil pump discharge pipe 1.21 mt rs, qty-01 no (7 ) lube oil centrifugf to lube oil pump discharge pipe 1.82 mtrs , qty-01( 8) osta housing oil drain pipe - 0.45 mtrs, qty-01 no (9 ) osta housing oil drain pipe- 0.60 mtrs , qty-01 no. - warranty period: 30 months after the date of delivery
Agency / Dept :
south central railway SCR
Due Date :
Oct 27, 2026 (25 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17571787
Location : chennai , tamil nadu
NEW TENDER
corrigendum tender for ss sheet sus 301l-dlt - dull finish, ss sheet sus304l/aisi 304l of size 5mm x 1250mm x 2100mm, no.1-finish to jis g 4304 standa rd. special condition : i) the sheets/plates shall be supplied in bundles of optimum weight 2mt+-10% & each sheet /plate shall be separated with a layer of water proof paper & after this the whole bundle should be wrapped with do uble layer of water proof and a bio-degradable plastic sheet of suitable thickness. a metal protection in edges shoul d also be provided. ii) all bundles shall have a minimum of 2 hoops upto 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid (wooden packing underneath) to facilitate han dling. mechanical damage & corrosion during transit if any shall be at the cost of supplier. a packing slip should be pasted on each box showing order no, pl no, description of item, drg.no/spec no./set list with version, qty, firm's name & address, date of dispatch covered in waterproof polythene.. - warranty period: 30 months after the date of delivery -quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lac s
Agency / Dept :
integral coach factory ICF
Due Date :
Oct 15, 2026 (13 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17464649
Location : margao , goa
Source : GEM Tenders
LIVE TENDER
tender for treadmill cft 2700 , curve treadmill - racer , rubber dumbbell , rubber weight plates power , 4 feet curl bar , 5 feet curl bar , 6 feet straight bar , 7 feet straight bar , vibrator bv 200, procurement of gym equipments, treadmill (cft 2700), curve treadmill - racer, rubber dumbbell, rubber weight plates power, 4 feet curl bar, 5 feet curl bar, 6 feet straight bar, 7 feet straight bar, vibrator bv 200
Agency / Dept :
indian navy
Due Date :
Oct 06, 2026 (4 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17468074
Location : north tripura , tripura
Source : GEM Tenders
LIVE TENDER
tender for commercial ac motorised treadmill , commercial spin bike , incline cross trainer , ab coaster , web board , pec dec fly , lat pulldown rowing machine , leg curl leg extension , functional trainer , leg press , shoulder press , olympic 3 in 1 multi bench , super bench , flat bench , chin up dip stand , hyperextension heavy commercial specification , dumbbells 2.5 kg , dumbbells 5 kg , dumbbells 7.5 kg , dumbbells 10 kg , dumbbells 12.5 kg , weight plates 2.5 kg , weight plates 5 kg , weight plates 7.5 kg , weight plates 10 kg , weight plates 15 kg , weight plates 20 kg , weight plates 25 kg , olympic straight rod , olympic curl rod , 3 tier dumbbell rack , plate tree , rubber mat , yoga mat , adhesive, gyamnasium equipment, commercial ac motorised treadmill, commercial spin bike, incline cross trainer, ab coaster, web board, pec dec fly, lat pulldown rowing machine, leg curl leg extension, functional trainer, leg press, shoulder press, olympic 3 in 1 multi bench, super bench, flat bench, chin up dip stand, hyperextension heavy commercial specification, dumbbells 2.5 kg, dumbbells 5 kg, dumbbells 7.5 kg, dumbbells 10 kg, dumbbells 12.5 kg, weight plates 2.5 kg, weight plates 5 kg, weight plates 7.5 kg, weight plates 10 kg, weight plates 15 kg, weight plates 20 kg, weight plates 25 kg, olympic straight rod, olympic curl rod, 3 tier dumbbell rack, plate tree, rubber mat, yoga mat, adhesive
Agency / Dept :
border security force BSF
Due Date :
Oct 19, 2026 (17 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17274262
Location : tlangnuam , mizoram
Source : GEM Tenders
LIVE TENDER
tender for motorized treadmill , elliptical cross trainer , rowing machine , latpull pull down machine , pec dec fly machine , angled leg press machine , leg extension leg curl , squat rack , cable cross over machine , preacher curl machine , olympic flat bench , inclined bench press , adjustable bench multifunctional , flat bench , dumbbell rack big , weight plates stand , punching bag , boxing gloves , sled machine with mat , dumbbells , weight plates , olympic rod power lifting barbell , ez bar , small barbell , shoulder rope , v shaped handles , straight pulling bar , rubber flooring tile black , wall mirror , first aid kit, gym equipment, motorized treadmill, elliptical cross trainer, rowing machine, latpull pull down machine, pec dec fly machine, angled leg press machine, leg extension leg curl, squat rack, cable cross over machine, preacher curl machine, olympic flat bench, inclined bench press, adjustable bench multifunctional, flat bench, dumbbell rack big, weight plates stand, punching bag, boxing gloves, sled machine with mat, dumbbells, weight plates, olympic rod power lifting barbell, ez bar, small barbell, shoulder rope, v shaped handles, straight pulling bar, rubber flooring tile black, wall mirror, first aid kit
Agency / Dept :
national institute of technology NIT
Due Date :
Oct 06, 2026 (4 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17274415
Location : bilaspur , himachal pradesh
Source : GEM Tenders
LIVE TENDER
tender for multi press machine , leg curl or leg extension , leg press hack squat , ski machine , lat pull row machine , olympic rod 20kg 7 ft , dumbell 10 kg , dumbell 15 kg , dumbell 20 kg , olympic weight plates 10 kg , olympic weight plates 15 kg , olympic weight plates 20 kg , electronic weight machine , rg ring gone, as per specs sheet
Agency / Dept :
sports authority of india SAI
Due Date :
Oct 06, 2026 (4 days left)
Tender Value :
8L
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Weight Plates. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Weight Plates sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Weight Plates Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Weight Plates, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Weight Plates Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Weight Plates Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Weight Plates.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Weight Plates depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Weight Plates Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Weight Plates bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Weight Plates. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Weight Plates, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Weight Plates, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Weight Plates?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Weight Plates tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Weight Plates?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Weight Plates, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Weight Plates is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All