sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

13Latest Vertical machining center Tenders List

Latest Vertical machining center Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Vertical machining center tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Vertical machining center tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Vertical machining center Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Vertical machining center tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Vertical machining center Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Vertical machining center Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Vertical machining center Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Vertical machining center tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Vertical machining center Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Vertical machining center sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Vertical machining center tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Vertical machining center tenders.

Is EMD mandatory for all Vertical machining center tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Vertical machining center work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Vertical machining center tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Vertical machining center Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

T18 Ref No : 16584974
Location : tiruklalikundram , tamil nadu
Source : GEM Tenders
LIVE TENDER
corrigendum tender for cnc vertical machining center with 20 tools automatic tool changer as per specification
Agency / Dept :
directorate of purchase and stores DPS
Due Date :
Aug 10, 2026 (Expire Today)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16191871
Location : tiruklalikundram , tamil nadu
Source : GEM Tenders
tender for cnc vertical machining center with 20 tools automatic tool changer as per specification
Agency / Dept :
directorate of purchase and stores DPS
Due Date :
Aug 01, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 15734781
Location : bangalore , karnataka
Source : GEM Tenders
tender for cnc double column vertical machining center , panel cooler ac , coolant system , hydraulic system , pre- dispatch inspection -pdi , installation and commissioning , stabilizer , machine andon light , standard tools and toolbox , hand held air gun , touch probe , set of spares for machine maintatinence , right angle milling head , first fill of lubricating oils,coolant. , document and manuals , test pieces for machining trails , levelling and anchoring materials , packaging and forwarding , tool holders and collets, cnc double column vertical machining center, cnc double column vertical machining center in annexure1, panel cooler ac as per annexure1 - detailed specification - sl.no 13.9, integrated and programmable coolant system as per annexure1, hydraulic system as per annexure1 - detailed specification - sl.no 12, pre- dispatch inspection in annexure iii -detailed specification, installation and commissioning as detailed specification of annexureiii - detailed specification, automatic voltage stabilizer compatible with the double column cnc vmc as per si. no.13.32, machie andon light as per annexure1 - detailed specification - sl.no 15.8, standard tools and toolbox for machine operation and maintenance in annexure1 - detailed specification - sl.no 13.34, hand held air gun per annexure1 - detailed specification - si. no 13.30, touch probe as per annexure1 - detailed specification - si. no 11, set of spares for machine maintatinence for 2 years- itemwise breakup to be provided, right angle milling head manual adjustable as per detailed specification annexure1 - detailed specification - sl.no 13.33, first filling of lubrication,hydraulic oils and coolant as per annexure1 - detailed specification - sl.no 19, supply of documents, manuals, backups and softcopies thereof as per annexure1 - detailed specification - sl.no 17, test pieces for proveout as per 7.12 of annexure-1 and 2.1,3.11 of annexure -iii -detailed technical specifications, supply of levelling and anchoring material as per annexure1 - detailed specification - sl.no 16, packaging and forwarding as per annexure1 - detailed specification - sl.no 21, supply of tool holders and collets as per annexure -iv - detailed specification
Agency / Dept :
central manufacturing technology institute CMTI
Due Date :
Jun 30, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16084092
Location : ludhiana , punjab
Source : GEM Tenders
tender for lcd unit 12.1 inch , soft key horizontal 14 inch color crt mdi , key board , key sheet , key sheet soft key , battery case z 218 3 x 1.5 v , battery lr20 , existining crt display replasement included , installation and commissioning new lcd included, pac bid for fanuc lcd unit for vertical machining center, fanuc control
Agency / Dept :
directorate general of training
Due Date :
Jul 24, 2026
Tender Value :
4.59L
View Documents
T18 Ref No : 15719668
Location : ghatshila , jharkhand
Source : GEM Tenders
tender for title1 , title2 , title3 , title4 , title5 , title6 , title7 , title8 , title9 , title10 , title11 , title12 , title13 , title14 , title15 , title16 , title17 , title18 , title19 , title20 , title21 , title22 , title23 , title24 , title25, renovation and painting of shopping complex at ucil narwapahar, providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing (1 cement , 2 coarse sand (zone iii), 4 graded stone aggregate 20 mm nominal size), centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landing, balconies and access platform, centering and shuttering including strutting, propping etc. and removal of form for columns, pillars, piers, abutments, posts and struts, steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. thermo mechanically treated bars of grade fe 500d or more., brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in a) cement mortar (1 cement, 6 coarse sand), 12 mm cement plaster of mix (1 cement, 4 fine sand), neat cement punning., providing and fixing 1st quality ceramic glazed floor tiles conforming to is 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by eic in skirting, risers of steps and dados over 12 mm thick bed or cement mortar (1 cement, 3 coarse sand) and jointing with grey cement slurry, 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete., white washing with lime to give an even shade. a) satna lime wash on walls with one coat., removing white or colour wash by scrapping and sand preparing the surface smooth including necessary papering and repairs to scratches etc. complete, wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. one or more coats on old work, finishing walls with water proofing cement paint of required shade. new work (two or more coats applied, 3.84 kg per 10 sqm), distempering with 1st quality acrylic distemper (ready made) having voc content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete as per manufacturers specification. one or more coats on old work, painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work, providing and fixing soil, waste and vent pipes 100 mm dia, sand cast iron s and s pipe as per is 1729, demolishing r.c.c. work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of eic, providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete., providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia m.s. tube 1.5 m centre to centre, horizontal and vertical tubes joining with cup and lock system with m.s. tubes, m.s. tube challies, m.s. clamps and m.s. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of eic. the elevational area of the scaffolding shall be measured for payment purpose. the payment will be made once irrespective of duration of scaffolding., cement concrete flooring (1 cement, 2 coarse sand, 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate, 1.5 mm thick decorative laminated sheet, labour for fitting and fixing g.c.l. or c.a. sheet roofing in proper slope including the cost of j or l hooks, limpet iand bitumen washers, carriage of sheets to work site, and taxes all complete as per building specification and direction of eic., servicing of rolling shutters, rolling shutter made of 80mm x 1.25 mm machine rolled laths, servicing of rolling shutters, top cover for rolling shutters 1.25 mm thick metre, servicing of rolling shutters, 27.5 cm long wire spring grade no. 2 for rolling shutters, servicing of rolling shutters, ball bearing for rolling shutters
Agency / Dept :
uranium corporation of india limited UCIL
Due Date :
Jun 27, 2026
Tender Value :
29.19L
View Documents
T18 Ref No : 16239051
Location : najibabad , uttar pradesh
Source : GEM Tenders
corrigendum tender for fabrication repairing the condensate tank pump delivery line of the pan 1 , repairing the condensate tank pump delivery line of the pan 2 , repairing the condensate tank pump delivery line of the pan 3 , replacing damaged bypass line band flange of melter 1 , replacing damaged bypass line band flange of melter 2 , replacing damaged bypass line band flange of melter 3 , replace damaged 100 pound 3inch size pipeline from pan no 1 to pan no 6 and give satisfactory trial , replace the weak vapor pipe from pan no 1 to 6 size dia 1 150 m length 30 m 1 , replace the weak vapor pipe from pan no 1 to 6 size dia 1 150 m length 30 m 2 , replace main hole dia 600 mm of pan no 3 sevual with 10 mm thick plate , replace damaged overflow pipeline of bh and cl molasses conditioner of 6inch size 1 , replace damaged overflow pipeline of bh and cl molasses conditioner of 6inch size 2 , replace corroded nipples pipes flanges of 6inch size header on pan no 5 and 6 installation related nipples valves etc and give satisfactory trial , replace damaged ammonia pipeline flange nipple in pan no 4 and 6 1 , replace damaged ammonia pipeline flange nipple in pan no 4 and 6 2 , replace damaged ammonia pipeline flange nipple in pan no 4 and 6 3 , replace damaged ammonia pipeline flange nipple in pan no 4 and 6 4 , replace damaged ammonia pipeline flange nipple in pan no 4 and 6 5 , cut and remove damaged wash-out line installed on the pan and rebuild with supplied pipe and installation it 1 , cut and remove damaged wash-out line installed on the pan and rebuild with supplied pipe and installation it 2 , replace damaged washing pipeline nipple flange band on pan no 6 1 , replace damaged washing pipeline nipple flange band on pan no 6 2 , replace damaged washing pipeline nipple flange band on pan no 6 3 , replace damaged washing pipeline nipple flange band on pan no 6 4 , installation valve in steam line at pan no 2 550 mm 1 , installation valve in steam line at pan no 2 550 mm 2 , installation valve in steam line at pan no 2 550 mm 3 , installation valve in steam line at pan no 2 550 mm 4 , replace nipple and band of a heavy tank 2 , replace nipple and band of a heavy tank 3 , replace nipple and band of a heavy tank 4 , remove clean and reinstall 4inch size syrup line on pan , cut and remove syrup header and fabricate and installation new header , replacing the 6inch size glycol washing line fitted on pan no 1 , replacing nipples of different lines of pan no 6 1 , replacing nipples of different lines of pan no 6 2 , replacing nipples of different lines of pan no 6 3 , replacing nipples of different lines of pan no 6 4 , replacing 10inch size nipples of cut off line of pan no 6 1 , replacing 10inch size nipples of cut off line of pan no 6 2 , replacing 10inch size nipples of cut off line of pan no 6 3 , replacing 10inch size nipples of cut off line of pan no 6 4 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 1 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 2 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 3 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 4 , fabricating m s bed for syrup pump and motor fitting and alignment followed by satisfactory trial , dismantling weak condensate bottle of old set , replacing weak pipeline flange valve and band of old set vertical juice heater 1 , replacing weak pipeline flange valve and band of old set vertical juice heater 2 , replacing weak pipeline flange valve and band of old set vertical juice heater 3 , replacing weak pipeline flange valve and band of old set vertical juice heater 4 , replacing weak pipeline flange valve and band of old set vertical juice heater 5 , replacing weak pipeline of old quad set no 4 1 , replacing weak pipeline of old quad set no 4 2 , replacing weak pipeline of old quad set no 4 3 , replacing weak pipeline of old quad set no 4 4 , replacing weak pipeline of old quad set no 4 5 , dismantling damaged mesh of section pipe located at injection no 2 and 3 and making a new one from given m s plate and fitting it , cutting and discarding old damaged reducer plate of section pipe located at injection no 2 and 3 and remaking the same , fitting water line from overhead to service tank 1 , fitting water line from overhead to service tank 2 , details of work of canti machine no 6 and 7 1 , details of work of canti machine no 6 and 7 2 , details of work of canti machine no 6 and 7 3 , details of work with new pipes from s sugarbin 1 , details of work with new pipes from s sugarbin 2 , details of work with new pipes from s sugarbin 3 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 1 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 2 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 3 , work on hot water line of brown sugar magma 1 , work on hot water line of brown sugar magma 2 , work on hot water line of brown sugar magma 3 , work on hot water line of brown sugar magma 4 , cutting and removing damaged monitor casing and ribs , cutting and removing damaged center shaft and arms inside kcp machines no 1 and 2 bending and fitting new parts with 8 to 10 mm plate , dismantling damaged upper cover part of canty machine no 6 and 7 scrapping fabricating and fitting new cover with 12 mm plate and making all related connections , dismantling damaged part of molasses weighing scale receiving tank and fabricating and fitting new part by bending 8 mm thick, fabrication, fabricate and installation 6inch size nipple, fabricate and installation 6inch size flange, dismantling 6inch size pipeline, installing 6inch size pipeline and giving satisfactory trial, fabricate and installation 6inch size band, replace damaged 100 pound 3inch size pipeline from pan no 1 to pan no 6 and give satisfactory trial, dismantle the weak vapor pipe from pan no 1 to 6, fabricate the weak vapor pipe from pan no 1 to 6, replace main hole dia 600 mm of pan no 3 sevual with 10 mm thick plate, replace damaged overflow pipeline of bh and cl molasses conditioner of 6inch size, replace corroded nipples pipes flanges of 6inch size header on pan no 5 and 6 installation related nipples valves etc and give satisfactory trial, replace 2inch size pipeline, fabricate and installation 2inch size flange, fabricate and installation 2inch size nipple, fabricate and installation 3inch size flange, fabricate and installation 3inch size valve, replace and installation 6inch size pipeline, replace 6inch size pipeline of the above, installation valve in steam line at pan no 2 550 mm, installation flange in steam line at pan no 2 550 mm, installation nipple in steam line at pan no 2 550 mm, fabricate and installation catcher element size 75 x 75 x 8 angle on pan no 4 and 5, replace nipples of the above tank, replace bands of the above tank, replace partition of syrup tank with 10/12 mm thick plate, remove clean and reinstall 4inch size syrup line on pan, cut and remove syrup header and fabricate and installation new header, replacing the 6inch size glycol washing line fitted on pan no 1, replacing nipples of 2inch size line mentioned above, replacing nipples of 4inch size line mentioned above, replacing nipples of 6inch size line mentioned above, replacing nipples of 8inch size line mentioned above, replacing 10inch size nipples of cut off line of pan no 6, replacing 10inch size pipe line, making and fitting 10inch size flange, making and fitting 10inch size band, making and fitting 8inch size band, replacing 4inch size pipe line, making and fitting 4inch size flange, making and fitting 4inch size valve, fabricating m s bed for syrup pump and motor fitting and alignment followed by satisfactory trial, dismantling weak condensate bottle of old set vertical line juice heater and quad body no 4 disposing to scrap yard fabricating all connections using 8/10 mm plates and giving satisfactory vacuum trial, replacing 2inch size pipeline, replacing 6inch size pipeline, making and fitting 2inch size flange, making and fitting 6inch size flange, making and fitting 6inch size band, making and fitting 6inch size valve, dismantling damaged mesh of section pipe located at injection no 2 and 3 and making a new one from given m s plate and fitting it, cutting and discarding old damaged reducer plate of section pipe located at injection no 2 and 3 and remaking the same, fitting mentioned line into service tank, making and fitting 8inch size nipple, dismantling and fitting 6inch size pipeline, dismantling resistance box installed on spray making and fitting new one from given m m plate carrying out proper stay fitting and welding and conducting leak proof trial, dismantling and installing 8inch size pipeline, fabricating and installing 8inch size bands, fabricating and installing 8inch size flanges, dismantling and installing 12inch size pipeline, fabricating and installing 12inch size bands, fabricating and installing 12inch size flanges, dismantling and installing 3inch size pipeline, manufacturing and installing 3inch size nipples, manufacturing and installing 3inch size bands, cutting and removing damaged monitor casing and ribs inside canty no 1 and 2 and kcp machine 1 and 2 patching with 10/12 mm ms plate and giving satisfactory trial 1, cutting and removing damaged center shaft and arms inside kcp machines no 1 and 2 bending and fitting new parts with 8 to 10 mm plate 1, dismantling damaged upper cover part of canty machine no 6 and 7 scrapping fabricating and fitting new cover with 12 mm plate and making all related connections, dismantling damaged part of molasses weighing scale receiving tank and fabricating and fitting new part by bending 8 mm thick plate and depositing scrap in scrap yard, dismantling damaged plate of sugar discharge chute from sugar elevator to sugar grader and fabricating and fitting new plate of 6 mm thickness depositing scrap in scrap yard, modifying sugar chute of grader in dryer house and giving satisfactory trial, dismantling and installing 4inch size pipeline, fabricating and installing 4inch size flanges, manufacturing and installing 4inch size bands, manufacturing and installing 4inch size nipples, removing transit heater installed on c centrifugal machine opening side plate for cleaning and hydraulic servicing reinstalling in place and making all connections, dismantling and installing 2inch size pipeline, fabricating and installing 2inch size flanges, manufacturing and installing 2inch size nipples, manufacturing and installing 2inch size valves, removing old taper of sugar hopper no 1 scrapping it fabricating new one from 3/5 mm ms plate installing and giving satisfactory trial, dismantling and installing 6inch size pipeline, manufacturing and installing 6inch size bands, manufacturing and installing 6inch size flanges, manufacturing and installing 5inch size flanges, manufacturing and installing 5inch size valves, removing damaged/weak top and bottom sugar discharge chute of canty machine no 4 including flange scrapping fabricating new parts with 6 mm ms plate as per suit sample preparing all connections like angle channel etc fitting on side and giving satisfactory trial, installing 2inch flow meter, dismantling the damaged 6inch dia pipeline from primary clarifier to anoxic tank and putting it in scrap yard and installing a new pipeline, installing 4inch size valve/nrv, fabricating 4inch size band, fabricating and installing 2inch size flange, dismantling the damaged 8inch dia pipeline from aeration tank to secondary tank and putting it in scrap yard, dismantling diffusers installed in aeration tank and putting them in scrap yard and replacing the throat part, in sulfate removal plant reaction chamber dismantling corroded 6 mm partition plate putting it in scrap yard and fabricating with new 8 mm plate, dismantling corroded 2inch size treated water outlet line of etp and putting in scrap yard and installing new 3inch size line at the same location, dismantling 800 mm dia exhaust pipe line below turbine with nipple band flange and putting in scrap yard, fabricating 800 mm dia exhaust pipeline below turbine from 12 mm plate by bending and installing at position and providing satisfactory trial, fabricating 800 mm dia exhaust pipeline below vapor cell 950 wag meter from 12 mm plate by bending and installing at position and providing satisfactory trial, fabricating 800 mm dia exhaust pipeline below vapor cell 950 wag meter from 12 mm plate by bending into t shape and installing at position and providing satisfactory trial, fabricating 800 mm dia exhaust pipeline dummy/flange from 12 mm plate by bending and installing at position and providing satisfactory trial, dismantling weak part of semichemiser 1000 wag meter warm saser putting scrap in scrap yard fabricating from 12 mm thick plate by bending and installing with related connections and giving satisfactory trial size dia 3 4 m, dismantling weak parts of old quad body no 2 and 3 20inch vapor pipe putting scrap in scrap yard fabricating from 8 mm thick plate by bending and installing and providing satisfactory trial, dismantling weak parts of vapor pipe 32inch size of vapor cell 1000 wag meter putting scrap in scrap yard fabricating from 8 mm thick plate by bending and installing and providing satisfactory trial, dismantling weak part of 6inch size header of all juice heaters condensate and installing new one, removing all partition plates of juice heater header by cutting straight and circular shapes cleaning tube plate completely and fabricating new circular and straight partition plates from 10/12 mm plate installing and preparing header with ms strips as before applying rubber strips and providing satisfactory trial, cutting out quailons and all related angles fixed in clarifier compartments and refitting after completion of work and providing satisfactory trial, patching inside clarifier with 6/8 mm ms plate, dismantling damaged 8inch size ms pipeline from clarifier clear juice overflow tank to sombox, installing 6inch size ms pipeline from clarifier compartments no 2 and 3 to mud tank and providing satisfactory trial, opening 6inch size valve and installing at designated location, fabricating 6inch size nipple and installing at designated location, fabricating 6inch size flange by cutting plate and dismantling to fit, dismantling 4inch size air pipeline above door including nipple band flange and putting scrap in scrap yard, installing 4inch size air pipeline above door and providing satisfactory trial, dismantling 6inch size ms pipeline of big vacuum filter mud tank overflow line and putting scrap in scrap yard, fitting and trial of 6inch size ms pipeline overflow line of big vacuum filter mud tank at position, fabricating 6inch size band, fabricating 8inch size band, dismantling 8inch size pipeline from big vacuum filter pump to condenser and putting scrap in scrap yard, fitting and trial of 8inch size pipeline from big vacuum filter pump to condenser at position, dismantling 4inch ms pipeline from filter juice header to vibro screen, fitting and trial of 4inch ms pipeline from filter juice header to vibro screen at position, making 4inch size nipple, opening 4inch size valve, installing 4inch size valve at the specified location, cutting 4inch size flange from plate making it and fitting after drilling, dismantling 3inch size pipeline, installing and fitting 3inch size line at position and giving satisfactory trial, making and installing 3inch size t, making and installing 3inch size nipple, cutting 3inch size flange from plate making it and installing, making and installing 3inch size band, dismantling 8inch size clear juice overflow pipeline, installing and fitting 8inch size clear juice overflow pipeline at position and giving satisfactory trial, installing and fitting 6inch size pipeline at position and giving satisfactory trial, making and installing 6inch size band/elbow at specified location, making and installing 6inch size t, dismantling 4inch size pipeline, installing and fitting 4inch size pipeline at position and giving satisfactory trial, making and installing 4inch size band, making and installing 4inch size t, dismantling 10inch size pipeline, installing fitting and trial of 10inch size pipeline at position, making and installing 10inch size t, making and installing 10inch size dummy/flange, dismantling 6inch pipeline, installing fitting and trial of 6inch size pipeline at position, opening and binding 6inch size valve, installing fitting and trial of 4inch size pipeline at position, making and installing 8inch and 6inch size cross, dismantling 4inch size ammonia pipeline of semichemiser quad, installing 4inch size ammonia pipeline of semichemiser quad at position, making 4inch size band, making 4inch size t, making 4inch size flange, dismantling 2inch size pipeline, fixing 2inch size pipeline in position, dismantling new quad no 2 vapor pipe 24inch size vapor pipeline fabricating it by bending with 10 mm thick plate and installing, fabricating and installing 24inch size bends, fabricating and installing 24inch size tees, fabricating and installing 24inch size flange/dummy, dismantling 24inch size pipeline, fitting 24inch size pipeline in position, fabricating and installing 24inch size flange, cutting damaged 6inch syrup pump header fabricating new header and installing along with fitting all related nipples valves etc and conducting satisfactory trial, dismantling bent incoming and outgoing wax and heater cell and partition plate between double beat valve of juice heater/ juice heater header fabricating new one using 12/10 mm plate as before installing and conducting satisfactory trial, dismantling 6inch condensate header of juice heaters and replacing the weak part, fitting 6inch size pipeline in position and conducting satisfactory trial, fabricating and installing 6inch size flange, fabricating and installing 6inch size nipple, fabricating and installing 6inch size tees, dismantling and fitting 6inch size pipeline in position and conducting satisfactory trial
Agency / Dept :
uttar pradesh cooperative sugar factories federation ltd UPCSFFL
Due Date :
Jul 17, 2026
Tender Value :
4.5L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15996469
Location : najibabad , uttar pradesh
Source : GEM Tenders
tender for centrifugal machine spares spares for kcp d412 cf machine 1 , spares for kcp d412 cf machine 2 , spares for kcp d412 cf machine 3 , spares for kcp d412 cf machine 4 , spares for kcp d412 cf machine 5 , spares for kcp d412 cf machine 6 , spares for kcp d412 cf machine 7 , spares for kcp d412 cf machine 8 , spares for kcp d412 cf machine 9 , spares for kcp d412 cf machine 10 , spares for kcp d412 cf machine 11 , spares for kcp d412 cf machine 12 , spares for kcp d412 cf machine 13 , spares for kcp d412 cf machine 14 , spares for kcp d412 cf machine 15 , spares for kcp d412 cf machine 16 , spares for kcp d412 cf machine 17 , spares for kcp d412 cf machine 18 , spares for kcp d412 cf machine 19 , spares for kcp d412 cf machine 20 , spares for kcp d412 cf machine 21 , spares for kcp d412 cf machine 22 , spares for kcp d412 cf machine 23 , spares for kcp d412 cf machine 24 , spares for kcp d412 cf machine 25 , spares for kcp d412 cf machine 26 , spares for kcp d412 cf machine 27 , spares for kcp d412 cf machine 28 , spares for kcp d412 cf machine 29 , spares for kcp d412 cf machine 30 , spares for kcp d412 cf machine 31 , spares for kcp d412 cf machine 32 , spares for kcp d412 cf machine 33 , spares for kcp d412 cf machine 34 , spares for kcp d412 cf machine 35 , spares for kcp d412 cf machine 36 , spares for kcp d412 cf machine 37 , spares for kcp d412 cf machine 38 , spares for kcp d412 cf machine 39 , spares for kcp d412 cf machine 40 , spares for kcp d412 cf machine 41 , spares for kcp d412 cf machine 42 , spares for kcp d412 cf machine 43 , spares for kcp d412 cf machine 44 , spares for kcp d412 cf machine 45 , spares for kcp d412 cf machine 46 , spares for kcp d412 cf machine 47 , spares for kcp d412 cf machine 48 , spares for kcp d412 cf machine 49 , spares for kcp d412 cf machine 50 , spares for kcp d412 cf machine 51 , spares for kcp d412 cf machine 52 , spares for kcp d412 cf machine 53 , spares for kcp d412 cf machine 54 , spares for kcp d412 cf machine 55 , spares for kcp d412 cf machine 56 , spares for kcp d412 cf machine 57 , spares for kcp d412 cf machine 58 , spares for kcp d412 cf machine 59 , spares for kcp d412 cf machine 60 , spares for 1350kt 30 degree cf machine 1 , spares for 1350kt 30 degree cf machine 2 , spares for 1350kt 30 degree cf machine 3 , spares for 1350kt 30 degree cf machine 4 , spares for 1350kt 30 degree cf machine 5 , spares for 1350kt 30 degree cf machine 6 , spares for 1350kt 30 degree cf machine 7 , spares for 1350kt 30 degree cf machine 8 , spares for 1350kt 30 degree cf machine 9 , spares for 1350kt 30 degree cf machine 10 , spares for 1350kt 30 degree cf machine 11 , spares for 1350kt 30 degree cf machine 12 , spares for 1350kt 30 degree cf machine 13 , spares for 1350kt 30 degree cf machine 14 , spares for 1350kt 30 degree cf machine 15 , spares for 1350kt 30 degree cf machine 16 , spares for v1750 cf machine 1 , spares for v1750 cf machine 2 , spares for v1750 cf machine 3 , spares for v1750 cf machine 4 , spares for v1750 cf machine 5 , spares for v1750 cf machine 6 , spares for v1750 cf machine 7 , spares for v1750 cf machine 8 , spares for v1750 cf machine 9 , spares for v1750 cf machine 10 , spares for v1750 cf machine 11 , spares for v1750 cf machine 12 , spares for v1750 cf machine 13 , spares for v1750 cf machine 14 , spares for v1750 cf machine 15 , spares for v1750 cf machine 16 , spares for v1750 cf machine 17 , spares for v1750 cf machine 18 , spares for v1750 cf machine 19 , spares for v1750 cf machine 20 , spares for v1750 cf machine 21 , spares for v1750 cf machine 22 , spares for v1750 cf machine 23 , spares for v1750 cf machine 24 , spares for v1750 cf machine 25 , spares for v1750 cf machine 26 , spares for v1750 cf machine 27 , spares for v1750 cf machine 28 , spares for v1750 cf machine 29 , spares for v1750 cf machine 30 , spares for v1750 cf machine 31 , spares for v1750 cf machine 32 , spares for v1750 cf machine 33 , spares for v1750 cf machine 34 , spares for v1750 cf machine 35 , spares for v1750 cf machine 36 , spares for v1750 cf machine 37 , spares for v1750 cf machine 38 , spares for v1750 cf machine 39 , spares for v1750 cf machine 40 , spares for v1750 cf machine 41 , spares for v1750 cf machine 42, centrifugal machine spares, piston with connecting rod for pneumatic cylinder bore 150mm stroke 250 mm, flow control valve size 1/2 inch single acting, spring return for hood intermediate lifting, flow control valve size 1/4 inch single acting, spring return for hood intermediate lifting, ss needle valve 1/2 inch (thread type), ms socket size 1/2 inch, ms socket size 3/8 inch, ms socket size 1/4 inch, ms connector size 3/8 inch x 1/4 inch, ms connector size 3/8 inch x 3/8 inch, rubber bush for coupling bore 23 mm, felt seal 10 x 6 x 700 lg, lock washer with nut mb22, lock washer mb26, brake pads for brake cylinder (old model), complete brake cylinder (old model), diaphragm for brake cylinder, break cylinder, ss taper shank screw with lock nut & washer 5x25 mm, teflon centering ring in two halves for cover, teflon ring in two halves for hood, spring for pneumatic cylinder size 25 x 75 mm, spring for pneumatic cylinder bore 150 mm stroke 250 mm, rubber spare kit for pn cyl bore 100 mm, stroke 500 mm double acting, rubber spare kit for pn cyl bore 100 mm, stroke 150 single acting, rubber spare kit for pn cyl bore 65 mm, stroke 75, rubber spare kit for pn cyl bore 70 mm, stroke 75, rubber spare kit for pn cyl bore 100 mm, stroke 150 double acting, rubber spare kit for pn cyl bore 25 mm, stroke 25 single acting, rubber spare kit for pn cyl bore 100 mm, stroke 100 mm single acting, glycoder pg 808580 a, glycoder pg 202330 f, glycoder pg 657030 f, solenoid valve rotex make special repair 3013, atm 210 no16063 one way rotex make, solenoid valve rotex make special repair 3012 atm 210 if 158 two way rotex make, solenoid valve rotex make special repair 51432 atm 210, 1030 wn 16032 rotex make five way, sugar wash nozzle h 1/4 inch u2540, sugar wash nozzle h 3/8 inch 65100, sugar wash nozzle h 3/8 inch 25100, sugar wash nozzle h 1/4 inch u1520, external circlip 24 x 12 n is 3075, external circlip 23 x 12 n is 3075, external circlip 30 x 12 n is 3075, htm 24 x 70 mm lg (hb), teflon joint dia 180/1525, rubber o ring 131 x 353, rubber buffer, cam follower nukr 72, seal kit for 5 inch cylinder of butterfly valve, spring set for 100 x 100 pn cylinder, rubber spare kit for pn cyl bore 150 mm, stroke 250 mm single acting, rubber spare kit for pn cylinder bore 130 mm stroke 100 mm double acting cylinder, rubber seat for butterfly valve 300 dn (poonawala make), rubber seat for butterfly valve 250 dn (poonawala make), complete double acting pneumatic air cylinder (inout) bore 100mm stroke 150mm, complete double acting pneumatic air cylinder (inout) bore 65 mm stroke 75 mm, complete butterfly valve 300 mm, 5/2 way hand lever valve, sugar wash valve size 1 inch swastik make, air filter for oil lubricator, spring vertical hood air cylinder for discharge size 6 inch stroke 150 mm, ss clamp, lock nut 90 mm (back thread), lock washer 90 mm, rubber o ring 155 x 30 mm, rubber strip 65 x 5 mm, rubber rope 45 mm, ss ring id1355 mm with tapered ss strip od 1635 mm thickness 45 mm, rubber rope 50 mm, nozzle pipe, rubber v sealing ring id105mm, solenoid valve 4 way rotex make, air filter & air oil regulator (for lubricator), ventury for oil lubricator, rubber coated metallic oil seal (black) size 105 x 130 x 13 mm, ss needle valve 1/2 inch, complete bearing housing with shaft and pulley for buckau wolf continuous centrifugal machine sc1350kt30 degree machine no 4111 year 1989 rpm1800, rubber buffer, rubber star member for coupling, brake pad assembly, liner fitted to ms sheet for brake pad, o ring id 260 x d5, dovex r backing screen, sandwich screen, working screen in two pieces, trapezoidal rubber cord for monitor case cover 18x15x15x5850, rubber strip for inner shell of monitor case 50x25x3200, proximity switches 24volt dc, speed control valve for air size 1/4 inch dia bsp, solenoid valve manifold consisting of 3way valve (rotex make), solenoid valve manifold consisting of 4way valve (rotex make), solenoid valve manifold consisting of 1way valve (rotex make), compressed air filter 1/2 inch bsp, sugar wash nozzles, process control valve for shw water and hot water (swastik make) 20mm flange type, process control valve for shw water and hot water (swastik make) 25mm flange type, complete kit consisting of rubber buckets for basket bottom valve, complete kit consisting of rubber buckets for tilting massecuite feeding, complete kit consisting of rubber buckets for molasses classifier, complete kit consisting of rubber buckets for vertical air cylinder for plough discharge, complete kit consisting of rubber buckets for horizontal air cylinder for plough discharge, complete kit consisting of rubber buckets for air actuator for butterfly valve for massecuite feeding spout 200a with stud 10x30 mm elomatic, complete kit consisting of rubber buckets for bottom valve 150mm, complete kit consisting of rubber buckets for vertical air cylinder 100mm, complete kit consisting of rubber buckets for vertical air cylinder 70mm (plough up/down inside), butterfly valve with air actuator, rubber seat for butterfly valve 200dn make poonawala, rubber seat for butterfly valve 300dn make poonawala, pneumatic actuator (make ellomatic, poonawala typepo/200a serial no 24579, pneumatic actuator (make ellomatic, poonawala typepo/100a serial no 39807, sugar wash nozzle (as per sample), pressure switch ips100 (size 1/4 inch), solenoid valve (rotex make) special repair 3012 atm210 tf158 two way, solenoid valve special repair 3013 atm210 nu16063 rotex make one way, solenoid valve special repair 3013 atm210 nu16063 rotex make four way, air filter and regulator (nozzle/venturi) for oil lubricator, air actuator 100a for butterfly valve, complete kit vertical cylinder for plough discharge in side
Agency / Dept :
uttar pradesh cooperative sugar factories federation ltd UPCSFFL
Due Date :
Jul 10, 2026
Tender Value :
2L
View Documents
T18 Ref No : 16226683
Location : port blair , andaman and nicobar islands
Source : GEM Tenders
tender for almirah large steel 1 by 2 hanging 1 by 2 shelving , mattress for king size bed , side board , chair plastic ornate , charpoy ip with hard top , shoe rack wooden double door , table center two tier , table writing , chair dining long back and cushion , table center with glass top , table dining 4 pers , sofa set 5 seater with cushion , sofa set 4 seater , table dressing ladies including stool , peg table with glass top , teapoy , locker bed side steel , rack adjustable 6 tier steel , hat stand with mirror , chair writing , table dining round shape with 4 chair t wood , chair d man , receptacle pvc , chair computer , bin linen multipurpose , chair visitors , hot case large , chair cushioned with arms , table office wooden , table office officer , bed hard , almirah small steel with shelves , book case , chair verandah , chair easy , chair dining , chair school with hand board , durries 24 feet x 15 , rack shoe steel , rack single 2745 x 760 x 1905 mm , sofa set 5 seater , peg table , tv trolly , trestle store room steel , table dining six pers , table dining eight pers, replacement of ber furniture for the qe jun 2025 and qe sep 2025 under ge haddo sri vijaya puram, all as shown on drawing. overall size shall 920mm long 485mm wide and 1985mm high. the base shall be 100mm high. the base shall be made of two numbers mild steel sheet channels shape with ends covered and welded to bottom of almirah. mild steel sheet for channel shall be 1mm thick. the base channel shall be welded at 50mm from each end of 920mm length. top comma sides comma back comma bottom and front of almirah shall be 1mm thick mild steel sheet. two shelves shall be provided at 350mm and 700mm from bottom of almirah. ahan ging rod 60mm from top shall be provided which shall be of 20mm dia steel chromium plated conduit pipe of wall thickness 1 point 25mm. two sockets shall be provided at the end of hanging rod. front shutters shall have two leaves. a steel chromium plated handle 100mm long shall provided to shutters. a three way locking device shall be provided to front shutters. each leaf of front shutter shall be hinged with three nubers butt hinges 75mm long and shutters shall be side hung. all joints and welding comma fixing shall be done with standard workmanship. all hung. all joints and welding comma fixing shall be done with standard workmanship. the almirah shall be finished dry powder coated in double shade different colour after properly smoothening the surface or as approved by ge both internaly and externaly. rest all as specified oblique shown in drawing and directed by enginer in charge., the overall of size of mattress 78 inch x 72 inch x 8 inch. the matress shall be made of natural latex and cool foam reinforced by each other by press mechanism.the tapestry used in the matress shall be of best quality. the pilllow shall be of size 600mmx300mm filled with white reckon fibre and covered with best quality cotton fabric in desired shape and bedsheet size of 9 feet x 8 feet long best quality cotton colour approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., oveall size shall be 1220mm long comma 455mm wide and 760mm high. body of the side board comma shelves comma drawers comma shutters shall be made of 18 mm thick exterior grade mdf board both side laminated in light wallnut shade or as approved by ge. back of side board shall be 12 mm thick plywood. sides comma back and bottom of drawers shall be of 18 mm thick mdf board bothside laminated. top drawer shall be given 5 comportment in equidistant space in front portion and one comportment in remaining portion. 4mm thick teak wood edging shall be provided to all edges of mdf board. ss handle and ss knobs as approved by ge shall be provided for shutter and drawers. drawers shall be supported with telescopic channel for smooth functioning. 75 mm high skirting shall be provided by 19 mm thick teak wood as shown in drawing. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer-in-charge., as per trade pattern and directed by enginer in charge, long and short rails of bed shall be 65 x 25 mm 16 gauge rectangle ms tube.stifners shall be 25 mm 16 gauge square ms pipe. legs shall be 32 mm 16 gauge square ms pipe and welded properly at joints to make the charpoy. 25 x 60 x 6 mm cleats be welded with short rails inner side to support the plywood. 12 mm thick ply wood bwr type unpolished shall be provided to the top of charpoy screwed with cleat and stiffners by nut and washers. all steel members shall be finshed with two coats of synthetic enamel paint to obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper in black colour. rest all as specified oblique shown in drawing and directed by enginer in charge., as per trade pattern and directed by enginer in charge., overall size shall be 900mm long comma 450mm wide and 400mm high. all wood shall be of teak wood. top of the table shall be provided with 12 mm thick glass of approved shade. legs shall be made out of 60mmx30mm in section teak wood and 356 mm high. bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs comma widthwise at 100mm above the bottom of legs. the bottom tier shall be fixed on the top of bottom side rails with 50mm long screwss. the bottom tier shall be 12 mm thick glass of approved shade. 25mm dia hard rubber oblique pvc rings shall be fixed to the bottom of all legs fixed with 30mm long screws. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge, overall size shall be 450mm wide at bottom legs level and 455mm deep and 1200 mm high. all timber work shall be first class seasoned teak wood free from knots oblique defects. front legs shall be of size 25mmx50mm in section and 450mm high and rear legs shall be of section 65mmx50mm made to shape as shown on drg. the front and rear legs at seat level shall be joined by 40 mm x 20 mm in section side rails provided at 450 mm from bottom legs. the top of side rails shall be at 450 mm from bottom of legs. two side stiffeners of 25 mm x 40 mm in section shall beprovided joining front and rear legs. the bottom side stiffeners shall be 100 mmabove the bottom of legs. a middle stiffener of 25 mm x 40 mm in section joining the side stiffeners in middle shall be provided as shown on drg. for seat cushion comma a frame shall be made with 75 mm x 20 mm in section front and rear wooden horizontal rails comma joined by 40 mm 20 mm in section wooden side rails. 70 mm x 10 mm batten shall be provided in the middle. 45 mm x 10 mm batten shall be provided with three equal gaps. 50 mm thick comma 32 density foam shall be provided to the chair which shall be covered with leatherised rexine of best quality as approved by ge. the back rest the shape of legs shall be as shown on drg. rails of 45mmx25mm in section shall be 40mm apart from legs and joined by 10mm dia teak wood in vertical and 12mm dia teak wood in horizontal. back shall have vertical battens 20mmx25mm in section. 50mm thick synthetic foam of 32 density covered with leatheised rexene made to shape as shown on drg shall be fixed over 10mm thick plywood commercial. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., overall size shall be 1200mm long comma 600mm wide and 400mm high. legs shall be of 40mm dia anodized brass legs comma four in number in one piece. the legs shall be joined in short and long sides with two number 25mm dia brass pipes of wall thickness 2mm. the top pipe shall be fixed 150mm from top and the lower pipe shall be at 100 from bottom of top pipe the brass frame shall be 900mm long and 450mm wide. vaacuum rubber shall be provided at top of legs comma which shall be closed with brass sheet 1 point 6mm thick. the bottom of legs shall be covered with brass sheet of 1 point 6mm thick sheet. the bottom of legs shall have pvc shoes. the top shall be provided with 12 mm thick glass of approved shade with corners rounded as shown drawing comma the edges of top of table shall be rounded off. rest all as specified oblique shown in drawing and directed by enginer in charge., all wooden part shall be first class seasoned teak wood free from knots and defects. hard rubber oblique nylon buffers shall be fixed at the bottom of legs with brass screws, top shall be 18 mm thick exterior grade mdf board both side laminated in light wallnut shade or as approved by ge comma duly fixed with 4mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh 8 nos of l shape corner of flat iron 5mm thick 4 inch x 4 inch between legs and rail to be fixed with screw. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by engineer in charge., the set consist of one long piece of three seater and two small pieces of single seater. all timber work shall be first class seasoned teak wood free from knots oblique defects. cushion for seat and back shall be of 100mm thick 40 density duly covered with fabric oblique tapestry cloth not less than rs 500 by mtr composition of 65 percentage polyester and 35 percentage cotton or as approved by ge. all the wooden joints shall be fixed with bamboo pins and nails shall not be used. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge., the set consist of one long piece of two seater and two small pieces of single seater. all timber work shall be first class seasoned teak wood free from knots oblique defects. cushion for seat and back shall be of 100mm thick 40 density duly covered with fabric oblique tapestry cloth not less than rs 500 by mtr composition of 65 percentage polyester and 35 percentage cotton or as approved by ge. all the wooden joints shall be fixed with bamboo pins and nails shall not be used. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by engineer in charge., the body of table and stool shall be 18m thick exterior grade pre laminated mdf board one side laminated in light wallnut shade or as approved by ge comma duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh. drawers shall be supported with telescopic ball bearing channel for smooth functioning. shutter shallbe fixed with ss piano hinges and magnetic catcher. mirror frame shall be first class teak wood free from knots and defects. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge, overall size shall be 450mm long comma 300mm wide and 380mm high. legs shall be of first class teak wood of section 30mmx50mm. the legs shall be 362mm high. 5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position. two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs. two bottom rails of size 20mmx40mm shall be fixed between the legs. a centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg. vaacuum rubber shall be provided at top of legs. the top shall be 12mm thick plate tinted glass white colour with corners rounded as shown drawing comma the edges of top of table shall be rounded off. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge, the leg shall be 60mm x 30mm in section and 497 mm high and shall be of teak wood 5mm x 5mm in section groove shall be provided at the visible portion of the top of legs. top rail of first class teak wood of 20mm x 50mm in section and 510mm long shall be provided between the legs bottom rail of teak wood of 20mm x 50mm in section and 420mm long shall be provided between legs comma widthwise at 100mm above the bottom of legs. a centre rail of size 20mm x 50mm shal also be provided lengthwise at centre in between the side bottom rails irrespective of what is shown on drg 25mm thick and 25mm dia hard rubber pvc rings shall be fixed to the bottom of all legs fixed with 30 mm long screws. top of the table shall be of 18 mm thick exterior grade mdf board both side laminated in light wallnut shade or as approved by ge comma with 4mm thick teak wood beading all round the edges of top. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., 1mm thick ms sheet shall be used to manufacture locker except legs. two legs shall be provided to almirah as shown on drawing and shall be of 1 point 25 mm thick ms sheet. cromium plated stainless steel godrej type handle 100mm long shall be fixed on shutters comma locker shall be fitted with isi marked 75mm 6 lever lock with three way locking system. front shutters shall have two leaves of equal size. locker shall be finished with shade of ta gray colour or as approved ge both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper. rest all as specified shown in drawing and directed by enginer in charge, over all size shall be 915mm long comma 305 mm wide and 1905mm high. frame shall be 40x40x5mm slotted angle iron fixed with nut bolts irrespective of shown in drawing.shelf shall be 1mm thick crca sheet with bottom support of 15x15x3mm angle iron. all steel surface shall be finished with shade of ta gray colour or as approved by ge both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. rest all as per drawing and directed by engineer in charge., overall size shall be 1330 mm long comma 710mm high. the inner frame shall be of 50mmx20mm teak wood battens six in nos . the back and front of frame shall be covered with 6mm thick commercial ply. the edges of the frame shall be covered with 6mmx35mm teak wood edging fixed alround the frame with headless nails and adhesive. six brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg. 5mm thick looking mirror shall be provided as shown on drg with beading alround . mild steel key plate shall be provided at both top corners of the hat stand. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces . all steel surfaces shall be painted with two coats of enamel paint over a coat of primer. rest all as per drawing and directed by engineer in charge., the frame of the chair shall be of 16 gauge 25mm dia ms tubular frame powder coated. back shall be designed with contoured lumber support for extra comfort. 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with pvc lippling alround shall be provided at seat and back. arm rest shall be of black integral skin poly urethane with shore a hardness and reinforced with ms insert. it shall be scratch and wheather resistant. both hand rest section shall have inner and outer dia of 210mm and 230mm respectively and have slope towards front. rest all as specified shown in drawing and directed by engineer in charge., table dining round shape 1200mm comma high 760mm shall be first class seasoned teak wood free from knots and defects. hard rubber oblique nylon buffers shall be fixed at the bottom of 04 legs of 30x40mm with brass screws comma top shall be 18 mm thick teak wood with12mm thick glass top. chair dining long back and cushion overall size shall be 450mm wide at bottom legs level and 455mm deep and 1200 mm high. all timber work shall be first class seasoned teak wood free from knots oblique defects. front legs shall be of size 25mmx50mm in section and 450mm high and rear legs shall be of section 65mmx50mm made to shape. the front and rear legs at seat level shall be joined by 40 mm x 20 mm in section side rails provided at 450 mm from bottom legs. the top of side rails shall be at 450 mm from bottom of legs. two side stiffeners of 25 mm x 40 mm in section shall beprovided joining front and rear legs. the bottom side stiffeners shall be 100 mm above the bottom of legs. a middle stiffener of 25 mm x 40 mm in section joining the side stiffeners in middle shall be provided as shown on drg. for seat cushion comma a frame shall be made with 75 mm x 20 mm in section front and rear wooden horizontal rails comma joined by 40 mm 20 mm in section wooden side rails. 70mmx 10mm batten shall be provided in the middle. 45 mm x 10 mm batten shall be provided with three equal gaps. 50 mm thick comma 32 density foam shall be provided to the chair which shall be covered with leatherised rexine tapestry cloth not less than rs 500 by mtr of best quality as approved by ge. rails of 45mmx25mm in section shall be 40mm apart from legs and joined by 10mm dia teak wood in vertical and 12mm dia teak wood in horizontal. back shall have vertical battens 20mmx25mm in section., overall size shall be 470mm wide comma 445mm deep and 1040mm high. tall timber work shall be first class seasoned teak wood free from knots oblique defects. front legs shall be 50x50mm at top and 40x40mm at bottom. rear legs shall be 95x50mm. the seat of the chair shall be woven in godrej pattern with 2mm wide 0 point 25mm thick best quality cane. all diamensions comma shape and size shall be followed as per drg. all joints comma fixing shallbe done in accordance with standard specifications. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge, as per trade pattern and directed by enginer in charge, body of the bin linen multipurpose comma shelves comma drawers comma shutters shall be made of 19mm thick exterior grade mdf board both side laminated. shade as approved by ge back shall be 12mm thick plywood sides back and bottom of drawers shall be of 12mm thick mdf board bothside laminated shade as approved by ge. 4mm thick teak wood edgig shall be provided to all edges of mdf board. ss handle and ss knobs as approved by ge shall be approved for shutter and drawers. drawers shall be supported with telescopic channel for smooth functioning 75mm high skirting shall be provided by 19mm thick teak wood as shown in drawing. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., as per trade pattern and directed by enginer-in-charge., top shall be made of teak wood with size of legs as 45mmx45mm at top and 30mmx30mm side stiffners of size 40x19mm. the top portion shall have be provided with teak wood frame made of 74mmx19mm batterns frame as shown in drg. the bottom of top frame shall be provided with asbestos sheet plain. the two shleeves fitted inside the hot case shall be made of 4mm dia wire mess welded to 12x3mm flat iron frame as shown. the inner sides/shutters including top and bottom of hot case shall be fitted with aluminium sheet lining allround. the shutters shall be fixed with aluminium hinges and each shutter shall be provided with dimentions comma shape and size shall be followed as per drg. all joints fixing shall be done in accordance with standard specification. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., as per trade patern and directed by enginer in charge., as per trade patern and directed by enginer in charge, as per trade patern and directed by enginer-in-charge, all steel member shall be 18 gauge ms pipe. the frame of head board and foot board shall be of 38mm ms square pipe. 18mm ms square pipe shall be provided in the inner of head or foot board frame as shown in drg. 18mm thick both side prelaminated mdf board of walnut shade with 4mm thick teakwood beading shall be screwed to ms strip arc welded with 18mm thick square pipe with standard workmanship both in head/foot board. one stiffener of size 25mmx25mm shall be welded between the two legs of head board over 150mm from the ground level. the top of bed hard shall be of 12mm thick bwr grade plywood of approved make fixed over the four equidistant stiffener of size 25mmx25mm sq ms pipe in line with bottom of 25x65mm long rail section. pvc shoes shall be provided to legs of bed. all steel members shall be finshed with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper in black colour. rest all as per drawing., overall size shall be 1270mm high comma 765mm wide and 440mm deep. 1mm thick ms sheet shall be used to manufacture almirah except legs. two legs shall be provided to almirah as shown on drawing and shall be of 1 comma 25 mm thick ms sheet. cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters comma almirah shall be fitted with isi marked 75mm 6 lever lock with three way locking system. front shutters shall have two leaves of equal size. the almirah shall be finished dry powder coated in double shade different colour after properly smoothening the surface or as approved by ge both internaly and externaly. rest all as specified shown in drawing and directed by enginer in charge., overall size shall be 1230mm long. 300mm wide and 760mm high. all wood shall be of first class teak wood . the legs shall be made to shape out of 50mmx100mm teak wood. the legs shall be 100mm high. the two long rails of 50mmx50mm in section and 1230mm long shall be provided for support of body of book case. the two long rails shall be joined with 25mmx50mm stiffeners at 150mm from each end joining the long rails. 19mm thick pre laminated mdf board shall be provided at bottom comma top comma sides shelves and vertical partitions. the back shall be of 6mm thick ply wood. the top comma shelves comma bottom and vertical partitions shall have 1 comma 5mm plastic laminated sheet fixed over the mdf board. the vertical partition shall have plastic laminated sheet on both sides. the shelves shall have plastic laminated sheet on top only. the top and bottom of book case shall have plastic laminated sheet on top only. the sides shall have plastic laminated sheet on both sides. the fornt edges of sides comma shelves comma vertical partition and top shall be covered with 3mmmm thick teak wood edging. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., the overall size of the chair shall not be less than 460mm wide 600mm deep and 355 mm high to seat from ground level and over all height 760mm. the frame of the chair verendah shall be made up of 20mm dia conduit piupe of wall thickness 1 point 6mm. seat and back of the chair shall be woven with virgin plastic cane 4mm wide and 0 point 6mm thick half round in true godrej pattern weighing not less than 6 gms in ten running meters. pvc hard rubber shoe shall be provided to each leg of chair verendah. the chair shall be powder coated in white colour after preparation of surface or as approved by ge. rest all as specified shown in drawing and directed by engineer in charge., overall size shall be 510mm long comma 575mm wide and 720mm high. all wood shall be seasoned first class teak wood free from knots and defects. hard nylon buffers shall be fixed at the bottom of legs with brass screws. canning of chairs by true godrej pattern with plastic cane 2mm to 2.5mm wide comma white colour coma quality as approved by ge all as specified and as shown on drgs. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by engineer in charge., the overall size shall be 440 mm wide x 430mm deep and 460mm high from front and 890mm high from back. all teak used shall be 1st class hard teak wood. pvc hard rubber ring of dia 25mm shall be provided to bottom of each leg with 20mm long screw. canning shall be done in true godrej pattern with virgin plastic cane of 2mm wide 0 point 6mm thick half round gola type weighing not less than 6 gms in ten running meters with border woven with 4mm thick plastic cane. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., overall size shall be 535mm long comma 470mm wide and 890mm high. well seasoned teak wood throughout in frame work shall be used for framework comma caning shall be done without any joint in the cane. the cane shall be of 2mm wide comma 0 point 4mm thick half round gola type of shah or equivalent brand. the sides of the chair shall be canned with 4mm thick cane. hard rubber rings of 25mm dia and 25mm high shall be screwed to the bottom of all legs. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., overall size shall be of 585 mm wx300 mm dx738 mm h. 25mm dia 16 gauge ms tube shall be provided for steel frame. synthetic enamel paint colour black shall be applied two coats over a coat of primer. 1st class teak wood shall be used for hand board. one piece pvc seat and back shall be provided. all diamensions comma shape and size shall be followed as per drg. all joints comma fixing shall be done in accordance with standard specifications. rest all as per drawing and directed by engineer in charge., overall size shall be 24 feet x 15 feet long. it shall be made up of heavy cotton fringes losely woven and knitted in rectangular pieces fringed at the ends having cotton backing .the nominal thickness of the durrie shall not be less than 5mm. as per sample approved by ge, overall size shall be 700mm long comma 300mm wide and 880mm high. main frame shall be 25mm dia 18 guage ms pipe. shelf frame shall be 19mm dia 18 guage ms pipe and covered by 3mm dia ms rods three in length wise and nine in width wise. all steel and iron surface shall be finished with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer after preparation of surfaces. rest all as per drawing and directed by engineer in charge., over all size of the rack shall be 2745mm length comma 760mm depth and 1905mm high. storage solutions mild steel heavy duty storage racks with 4 shelves . as per the trade pattern and directed by engineer in charge., the set consist of one long piece of three seater and two small pieces of single seater. as per trade pattern and directed by engineer in charge., overall size shall be 450mm long comma 300mm wide and 380mm high. all wood shall seasoned first class teak wood free from knots and defects. hard nylon buffers shall be fixed at the bottom of legs with brass screws. h type leg stiffeners shall be provided for better support. top shall be 18 mm thick exterior grade mdf board one side laminated in light wallnut shade or as approved by ge comma duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified/ shown in drawing and directed by enginer in charge., overall size shall be 650mm long x 500mm wide and 750mm high. the sides comma back comma shelf and front openable shutters shall be of 18mm thick prelaminated mdf board.the front shutters shall be of 5 point 5 mm thick glass shutter with magnetic catcher.brass handle and door catchers shall also be provided to the tv trolley as described on drg. the pull out drawers shall be provided with two telescopic channel.the top of the trolley shall be of 18mm thick prelaminated mdf board of size 750mmx600mm.50mm dia swivel type castors 4 in numbers shall be provided at base. 4mm thick teak wood beading shall be fixed allroung the edges of the top. rest all as specified shown in drawing and directed by enginer in charge, overall size shall be 2440mm long comma 600mm wide and 300mm high. two long angle iron 40mmx40mmx6mm of mild steel 1980mm long shall be provided 520mm apart at bottom connected with 50mm x 3mm iron bracing comma four in numbers comma and equally spaced with 50mm x 50mmx6mm iron. all steel and iron work surfaces shall be painted with two coats of enamel paint over a coat of primer with spray machine after preparation of steel surfaces on exposed to view when placed in position. rest all as specified shown in drawing and directed by enginer in charge, table dining 6 pers. overall size shall be 1500mm long comma 900mm wide and 750mm high. all wood shall be of first class teak wood. the top shall be of prelaminated mdf board of 18 by 19mm thick with 4mm thick teak wood beading alround the edges of the top fixed with headless nails and adhesive on long sides only., table dining 8 pers. overall size shall be 1800mm long comma 900mm wide and 750mm high. all wood shall be of first class teak wood. the top shall be of prelaminated mdf board of 18 by 19mm thick with 4mm thick teak wood beading alround the edges of the top fixed with headless nails and adhesive on long sides only.
Agency / Dept :
indian army
Due Date :
Jul 23, 2026
Tender Value :
64.96L
View Documents
T18 Ref No : 16022210
Location : najibabad , uttar pradesh
Source : GEM Tenders
tender for pan no 6 4 , installation valve in steam line at pan no 2 550 mm 1 , installation valve in steam line at pan no 2 550 mm 2 , installation valve in steam line at pan no 2 550 mm 3 , installation valve in steam line at pan no 2 550 mm 4 , replace nipple and band of a heavy tank 2 , replace nipple and band of a heavy tank 3 , replace nipple and band of a heavy tank 4 , remove clean and reinstall 4inch size syrup line on pan , cut and remove syrup header and fabricate and installation new header , replacing the 6inch size glycol washing line fitted on pan no 1 , replacing nipples of different lines of pan no 6 1 , replacing nipples of different lines of pan no 6 2 , replacing nipples of different lines of pan no 6 3 , replacing nipples of different lines of pan no 6 4 , replacing 10inch size nipples of cut off line of pan no 6 1 , replacing 10inch size nipples of cut off line of pan no 6 2 , replacing 10inch size nipples of cut off line of pan no 6 3 , replacing 10inch size nipples of cut off line of pan no 6 4 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 1 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 2 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 3 , replacing corroded hot water pipeline nipples flanges valves in pan no 4 4 , fabricating m s bed for syrup pump and motor fitting and alignment followed by satisfactory trial , dismantling weak condensate bottle of old set , replacing weak pipeline flange valve and band of old set vertical juice heater 1 , replacing weak pipeline flange valve and band of old set vertical juice heater 2 , replacing weak pipeline flange valve and band of old set vertical juice heater 3 , replacing weak pipeline flange valve and band of old set vertical juice heater 4 , replacing weak pipeline flange valve and band of old set vertical juice heater 5 , replacing weak pipeline of old quad set no 4 1 , replacing weak pipeline of old quad set no 4 2 , replacing weak pipeline of old quad set no 4 3 , replacing weak pipeline of old quad set no 4 4 , replacing weak pipeline of old quad set no 4 5 , dismantling damaged mesh of section pipe located at injection no 2 and 3 and making a new one from given m s plate and fitting it , cutting and discarding old damaged reducer plate of section pipe located at injection no 2 and 3 and remaking the same , fitting water line from overhead to service tank 1 , fitting water line from overhead to service tank 2 , details of work of canti machine no 6 and 7 1 , details of work of canti machine no 6 and 7 2 , details of work of canti machine no 6 and 7 3 , details of work with new pipes from s sugarbin 1 , details of work with new pipes from s sugarbin 2 , details of work with new pipes from s sugarbin 3 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 1 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 2 , details of work for kcp no 1 and 2 and canty machine no 6 and 7 3 , work on hot water line of brown sugar magma 1 , work on hot water line of brown sugar magma 2 , work on hot water line of brown sugar magma 3 , work on hot water line of brown sugar magma 4 , cutting and removing damaged monitor casing and ribs , cutting and removing damaged center shaft and arms inside kcp machines no 1 and 2 bending and fitting new parts with 8 to 10 mm plate , dismantling damaged upper cover part of canty machine no 6 and 7 scrapping fabricating and fitting new cover with 12 mm plate and making all related connections , dismantling damaged part of molasses weighing scale receiving tank and fabricating and fitting new part by bending 8 mm thick, fabrication, fabricate and installation 6inch size nipple, fabricate and installation 6inch size flange, dismantling 6inch size pipeline, installing 6inch size pipeline and giving satisfactory trial, fabricate and installation 6inch size band, replace damaged 100 pound 3inch size pipeline from pan no 1 to pan no 6 and give satisfactory trial, dismantle the weak vapor pipe from pan no 1 to 6, fabricate the weak vapor pipe from pan no 1 to 6, replace main hole dia 600 mm of pan no 3 sevual with 10 mm thick plate, replace damaged overflow pipeline of bh and cl molasses conditioner of 6inch size, replace corroded nipples pipes flanges of 6inch size header on pan no 5 and 6 installation related nipples valves etc and give satisfactory trial, replace 2inch size pipeline, fabricate and installation 2inch size flange, fabricate and installation 2inch size nipple, fabricate and installation 3inch size flange, fabricate and installation 3inch size valve, replace and installation 6inch size pipeline, replace 6inch size pipeline of the above, installation valve in steam line at pan no 2 550 mm, installation flange in steam line at pan no 2 550 mm, installation nipple in steam line at pan no 2 550 mm, fabricate and installation catcher element size 75 x 75 x 8 angle on pan no 4 and 5, replace nipples of the above tank, replace bands of the above tank, replace partition of syrup tank with 10/12 mm thick plate, remove clean and reinstall 4inch size syrup line on pan, cut and remove syrup header and fabricate and installation new header, replacing the 6inch size glycol washing line fitted on pan no 1, replacing nipples of 2inch size line mentioned above, replacing nipples of 4inch size line mentioned above, replacing nipples of 6inch size line mentioned above, replacing nipples of 8inch size line mentioned above, replacing 10inch size nipples of cut off line of pan no 6, replacing 10inch size pipe line, making and fitting 10inch size flange, making and fitting 10inch size band, making and fitting 8inch size band, replacing 4inch size pipe line, making and fitting 4inch size flange, making and fitting 4inch size valve, fabricating m s bed for syrup pump and motor fitting and alignment followed by satisfactory trial, dismantling weak condensate bottle of old set vertical line juice heater and quad body no 4 disposing to scrap yard fabricating all connections using 8/10 mm plates and giving satisfactory vacuum trial, replacing 2inch size pipeline, replacing 6inch size pipeline, making and fitting 2inch size flange, making and fitting 6inch size flange, making and fitting 6inch size band, making and fitting 6inch size valve, dismantling damaged mesh of section pipe located at injection no 2 and 3 and making a new one from given m s plate and fitting it, cutting and discarding old damaged reducer plate of section pipe located at injection no 2 and 3 and remaking the same, fitting mentioned line into service tank, making and fitting 8inch size nipple, dismantling and fitting 6inch size pipeline, dismantling resistance box installed on spray making and fitting new one from given m m plate carrying out proper stay fitting and welding and conducting leak proof trial, dismantling and installing 8inch size pipeline, fabricating and installing 8inch size bands, fabricating and installing 8inch size flanges, dismantling and installing 12inch size pipeline, fabricating and installing 12inch size bands, fabricating and installing 12inch size flanges, dismantling and installing 3inch size pipeline, manufacturing and installing 3inch size nipples, manufacturing and installing 3inch size bands, cutting and removing damaged monitor casing and ribs inside canty no 1 and 2 and kcp machine 1 and 2 patching with 10/12 mm ms plate and giving satisfactory trial 1, cutting and removing damaged center shaft and arms inside kcp machines no 1 and 2 bending and fitting new parts with 8 to 10 mm plate 1, dismantling damaged upper cover part of canty machine no 6 and 7 scrapping fabricating and fitting new cover with 12 mm plate and making all related connections, dismantling damaged part of molasses weighing scale receiving tank and fabricating and fitting new part by bending 8 mm thick plate and depositing scrap in scrap yard, dismantling damaged plate of sugar discharge chute from sugar elevator to sugar grader and fabricating and fitting new plate of 6 mm thickness depositing scrap in scrap yard, modifying sugar chute of grader in dryer house and giving satisfactory trial, dismantling and installing 4inch size pipeline, fabricating and installing 4inch size flanges, manufacturing and installing 4inch size bands, manufacturing and installing 4inch size nipples, removing transit heater installed on c centrifugal machine opening side plate for cleaning and hydraulic servicing reinstalling in place and making all connections, dismantling and installing 2inch size pipeline, fabricating and installing 2inch size flanges, manufacturing and installing 2inch size nipples, manufacturing and installing 2inch size valves, removing old taper of sugar hopper no 1 scrapping it fabricating new one from 3/5 mm ms plate installing and giving satisfactory trial, dismantling and installing 6inch size pipeline, manufacturing and installing 6inch size bands, manufacturing and installing 6inch size flanges, manufacturing and installing 5inch size flanges, manufacturing and installing 5inch size valves, removing damaged/weak top and bottom sugar discharge chute of canty machine no 4 including flange scrapping fabricating new parts with 6 mm ms plate as per suit sample preparing all connections like angle channel etc fitting on side and giving satisfactory trial, installing 2inch flow meter, dismantling the damaged 6inch dia pipeline from primary clarifier to anoxic tank and putting it in scrap yard and installing a new pipeline, installing 4inch size valve/nrv, fabricating 4inch size band, fabricating and installing 2inch size flange, dismantling the damaged 8inch dia pipeline from aeration tank to secondary tank and putting it in scrap yard, dismantling diffusers installed in aeration tank and putting them in scrap yard and replacing the throat part, in sulfate removal plant reaction chamber dismantling corroded 6 mm partition plate putting it in scrap yard and fabricating with new 8 mm plate, dismantling corroded 2inch size treated water outlet line of etp and putting in scrap yard and installing new 3inch size line at the same location, dismantling 800 mm dia exhaust pipe line below turbine with nipple band flange and putting in scrap yard, fabricating 800 mm dia exhaust pipeline below turbine from 12 mm plate by bending and installing at position and providing satisfactory trial, fabricating 800 mm dia exhaust pipeline below vapor cell 950 wag meter from 12 mm plate by bending and installing at position and providing satisfactory trial, fabricating 800 mm dia exhaust pipeline below vapor cell 950 wag meter from 12 mm plate by bending into t shape and installing at position and providing satisfactory trial, fabricating 800 mm dia exhaust pipeline dummy/flange from 12 mm plate by bending and installing at position and providing satisfactory trial, dismantling weak part of semichemiser 1000 wag meter warm saser putting scrap in scrap yard fabricating from 12 mm thick plate by bending and installing with related connections and giving satisfactory trial size dia 3 4 m, dismantling weak parts of old quad body no 2 and 3 20inch vapor pipe putting scrap in scrap yard fabricating from 8 mm thick plate by bending and installing and providing satisfactory trial, dismantling weak parts of vapor pipe 32inch size of vapor cell 1000 wag meter putting scrap in scrap yard fabricating from 8 mm thick plate by bending and installing and providing satisfactory trial, dismantling weak part of 6inch size header of all juice heaters condensate and installing new one, removing all partition plates of juice heater header by cutting straight and circular shapes cleaning tube plate completely and fabricating new circular and straight partition plates from 10/12 mm plate installing and preparing header with ms strips as before applying rubber strips and providing satisfactory trial, cutting out quailons and all related angles fixed in clarifier compartments and refitting after completion of work and providing satisfactory trial, patching inside clarifier with 6/8 mm ms plate, dismantling damaged 8inch size ms pipeline from clarifier clear juice overflow tank to sombox, installing 6inch size ms pipeline from clarifier compartments no 2 and 3 to mud tank and providing satisfactory trial, opening 6inch size valve and installing at designated location, fabricating 6inch size nipple and installing at designated location, fabricating 6inch size flange by cutting plate and dismantling to fit, dismantling 4inch size air pipeline above door including nipple band flange and putting scrap in scrap yard, installing 4inch size air pipeline above door and providing satisfactory trial, dismantling 6inch size ms pipeline of big vacuum filter mud tank overflow line and putting scrap in scrap yard, fitting and trial of 6inch size ms pipeline overflow line of big vacuum filter mud tank at position, fabricating 6inch size band, fabricating 8inch size band, dismantling 8inch size pipeline from big vacuum filter pump to condenser and putting scrap in scrap yard, fitting and trial of 8inch size pipeline from big vacuum filter pump to condenser at position, dismantling 4inch ms pipeline from filter juice header to vibro screen, fitting and trial of 4inch ms pipeline from filter juice header to vibro screen at position, making 4inch size nipple, opening 4inch size valve, installing 4inch size valve at the specified location, cutting 4inch size flange from plate making it and fitting after drilling, dismantling 3inch size pipeline, installing and fitting 3inch size line at position and giving satisfactory trial, making and installing 3inch size t, making and installing 3inch size nipple, cutting 3inch size flange from plate making it and installing, making and installing 3inch size band, dismantling 8inch size clear juice overflow pipeline, installing and fitting 8inch size clear juice overflow pipeline at position and giving satisfactory trial, installing and fitting 6inch size pipeline at position and giving satisfactory trial, making and installing 6inch size band/elbow at specified location, making and installing 6inch size t, dismantling 4inch size pipeline, installing and fitting 4inch size pipeline at position and giving satisfactory trial, making and installing 4inch size band, making and installing 4inch size t, dismantling 10inch size pipeline, installing fitting and trial of 10inch size pipeline at position, making and installing 10inch size t, making and installing 10inch size dummy/flange, dismantling 6inch pipeline, installing fitting and trial of 6inch size pipeline at position, opening and binding 6inch size valve, installing fitting and trial of 4inch size pipeline at position, making and installing 8inch and 6inch size cross, dismantling 4inch size ammonia pipeline of semichemiser quad, installing 4inch size ammonia pipeline of semichemiser quad at position, making 4inch size band, making 4inch size t, making 4inch size flange, dismantling 2inch size pipeline, fixing 2inch size pipeline in position, dismantling new quad no 2 vapor pipe 24inch size vapor pipeline fabricating it by bending with 10 mm thick plate and installing, fabricating and installing 24inch size bends, fabricating and installing 24inch size tees, fabricating and installing 24inch size flange/dummy, dismantling 24inch size pipeline, fitting 24inch size pipeline in position, fabricating and installing 24inch size flange, cutting damaged 6inch syrup pump header fabricating new header and installing along with fitting all related nipples valves etc and conducting satisfactory trial, dismantling bent incoming and outgoing wax and heater cell and partition plate between double beat valve of juice heater/ juice heater header fabricating new one using 12/10 mm plate as before installing and conducting satisfactory trial, dismantling 6inch condensate header of juice heaters and replacing the weak part, fitting 6inch size pipeline in position and conducting satisfactory trial, fabricating and installing 6inch size flange, fabricating and installing 6inch size nipple, fabricating and installing 6inch size tees, dismantling and fitting 6inch size pipeline in position and conducting satisfactory trial
Agency / Dept :
uttar pradesh cooperative sugar factories federation ltd UPCSFFL
Due Date :
Jul 13, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16357817
Location : port blair , andaman and nicobar islands
Source : GEM Tenders
corrigendum tender for almirah large steel 1 by 2 hanging 1 by 2 shelving , mattress for king size bed , side board , chair plastic ornate , charpoy ip with hard top , shoe rack wooden double door , table center two tier , table writing , chair dining long back and cushion , table center with glass top , table dining 4 pers , sofa set 5 seater with cushion , sofa set 4 seater , table dressing ladies including stool , peg table with glass top , teapoy , locker bed side steel , rack adjustable 6 tier steel , hat stand with mirror , chair writing , table dining round shape with 4 chair t wood , chair d man , receptacle pvc , chair computer , bin linen multipurpose , chair visitors , hot case large , chair cushioned with arms , table office wooden , table office officer , bed hard , almirah small steel with shelves , book case , chair verandah , chair easy , chair dining , chair school with hand board , durries 24 feet x 15 , rack shoe steel , rack single 2745 x 760 x 1905 mm , sofa set 5 seater , peg table , tv trolly , trestle store room steel , table dining six pers , table dining eight pers, replacement of ber furniture for the qe jun 2025 and qe sep 2025 under ge haddo sri vijaya puram, all as shown on drawing. overall size shall 920mm long 485mm wide and 1985mm high. the base shall be 100mm high. the base shall be made of two numbers mild steel sheet channels shape with ends covered and welded to bottom of almirah. mild steel sheet for channel shall be 1mm thick. the base channel shall be welded at 50mm from each end of 920mm length. top comma sides comma back comma bottom and front of almirah shall be 1mm thick mild steel sheet. two shelves shall be provided at 350mm and 700mm from bottom of almirah. ahan ging rod 60mm from top shall be provided which shall be of 20mm dia steel chromium plated conduit pipe of wall thickness 1 point 25mm. two sockets shall be provided at the end of hanging rod. front shutters shall have two leaves. a steel chromium plated handle 100mm long shall provided to shutters. a three way locking device shall be provided to front shutters. each leaf of front shutter shall be hinged with three nubers butt hinges 75mm long and shutters shall be side hung. all joints and welding comma fixing shall be done with standard workmanship. all hung. all joints and welding comma fixing shall be done with standard workmanship. the almirah shall be finished dry powder coated in double shade different colour after properly smoothening the surface or as approved by ge both internaly and externaly. rest all as specified oblique shown in drawing and directed by enginer in charge., the overall of size of mattress 78 inch x 72 inch x 8 inch. the matress shall be made of natural latex and cool foam reinforced by each other by press mechanism.the tapestry used in the matress shall be of best quality. the pilllow shall be of size 600mmx300mm filled with white reckon fibre and covered with best quality cotton fabric in desired shape and bedsheet size of 9 feet x 8 feet long best quality cotton colour approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., oveall size shall be 1220mm long comma 455mm wide and 760mm high. body of the side board comma shelves comma drawers comma shutters shall be made of 18 mm thick exterior grade mdf board both side laminated in light wallnut shade or as approved by ge. back of side board shall be 12 mm thick plywood. sides comma back and bottom of drawers shall be of 18 mm thick mdf board bothside laminated. top drawer shall be given 5 comportment in equidistant space in front portion and one comportment in remaining portion. 4mm thick teak wood edging shall be provided to all edges of mdf board. ss handle and ss knobs as approved by ge shall be provided for shutter and drawers. drawers shall be supported with telescopic channel for smooth functioning. 75 mm high skirting shall be provided by 19 mm thick teak wood as shown in drawing. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer-in-charge., as per trade pattern and directed by enginer in charge, long and short rails of bed shall be 65 x 25 mm 16 gauge rectangle ms tube.stifners shall be 25 mm 16 gauge square ms pipe. legs shall be 32 mm 16 gauge square ms pipe and welded properly at joints to make the charpoy. 25 x 60 x 6 mm cleats be welded with short rails inner side to support the plywood. 12 mm thick ply wood bwr type unpolished shall be provided to the top of charpoy screwed with cleat and stiffners by nut and washers. all steel members shall be finshed with two coats of synthetic enamel paint to obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper in black colour. rest all as specified oblique shown in drawing and directed by enginer in charge., as per trade pattern and directed by enginer in charge., overall size shall be 900mm long comma 450mm wide and 400mm high. all wood shall be of teak wood. top of the table shall be provided with 12 mm thick glass of approved shade. legs shall be made out of 60mmx30mm in section teak wood and 356 mm high. bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs comma widthwise at 100mm above the bottom of legs. the bottom tier shall be fixed on the top of bottom side rails with 50mm long screwss. the bottom tier shall be 12 mm thick glass of approved shade. 25mm dia hard rubber oblique pvc rings shall be fixed to the bottom of all legs fixed with 30mm long screws. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge, overall size shall be 450mm wide at bottom legs level and 455mm deep and 1200 mm high. all timber work shall be first class seasoned teak wood free from knots oblique defects. front legs shall be of size 25mmx50mm in section and 450mm high and rear legs shall be of section 65mmx50mm made to shape as shown on drg. the front and rear legs at seat level shall be joined by 40 mm x 20 mm in section side rails provided at 450 mm from bottom legs. the top of side rails shall be at 450 mm from bottom of legs. two side stiffeners of 25 mm x 40 mm in section shall beprovided joining front and rear legs. the bottom side stiffeners shall be 100 mmabove the bottom of legs. a middle stiffener of 25 mm x 40 mm in section joining the side stiffeners in middle shall be provided as shown on drg. for seat cushion comma a frame shall be made with 75 mm x 20 mm in section front and rear wooden horizontal rails comma joined by 40 mm 20 mm in section wooden side rails. 70 mm x 10 mm batten shall be provided in the middle. 45 mm x 10 mm batten shall be provided with three equal gaps. 50 mm thick comma 32 density foam shall be provided to the chair which shall be covered with leatherised rexine of best quality as approved by ge. the back rest the shape of legs shall be as shown on drg. rails of 45mmx25mm in section shall be 40mm apart from legs and joined by 10mm dia teak wood in vertical and 12mm dia teak wood in horizontal. back shall have vertical battens 20mmx25mm in section. 50mm thick synthetic foam of 32 density covered with leatheised rexene made to shape as shown on drg shall be fixed over 10mm thick plywood commercial. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., overall size shall be 1200mm long comma 600mm wide and 400mm high. legs shall be of 40mm dia anodized brass legs comma four in number in one piece. the legs shall be joined in short and long sides with two number 25mm dia brass pipes of wall thickness 2mm. the top pipe shall be fixed 150mm from top and the lower pipe shall be at 100 from bottom of top pipe the brass frame shall be 900mm long and 450mm wide. vaacuum rubber shall be provided at top of legs comma which shall be closed with brass sheet 1 point 6mm thick. the bottom of legs shall be covered with brass sheet of 1 point 6mm thick sheet. the bottom of legs shall have pvc shoes. the top shall be provided with 12 mm thick glass of approved shade with corners rounded as shown drawing comma the edges of top of table shall be rounded off. rest all as specified oblique shown in drawing and directed by enginer in charge., all wooden part shall be first class seasoned teak wood free from knots and defects. hard rubber oblique nylon buffers shall be fixed at the bottom of legs with brass screws, top shall be 18 mm thick exterior grade mdf board both side laminated in light wallnut shade or as approved by ge comma duly fixed with 4mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh 8 nos of l shape corner of flat iron 5mm thick 4 inch x 4 inch between legs and rail to be fixed with screw. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by engineer in charge., the set consist of one long piece of three seater and two small pieces of single seater. all timber work shall be first class seasoned teak wood free from knots oblique defects. cushion for seat and back shall be of 100mm thick 40 density duly covered with fabric oblique tapestry cloth not less than rs 500 by mtr composition of 65 percentage polyester and 35 percentage cotton or as approved by ge. all the wooden joints shall be fixed with bamboo pins and nails shall not be used. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge., the set consist of one long piece of two seater and two small pieces of single seater. all timber work shall be first class seasoned teak wood free from knots oblique defects. cushion for seat and back shall be of 100mm thick 40 density duly covered with fabric oblique tapestry cloth not less than rs 500 by mtr composition of 65 percentage polyester and 35 percentage cotton or as approved by ge. all the wooden joints shall be fixed with bamboo pins and nails shall not be used. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by engineer in charge., the body of table and stool shall be 18m thick exterior grade pre laminated mdf board one side laminated in light wallnut shade or as approved by ge comma duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh. drawers shall be supported with telescopic ball bearing channel for smooth functioning. shutter shallbe fixed with ss piano hinges and magnetic catcher. mirror frame shall be first class teak wood free from knots and defects. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge, overall size shall be 450mm long comma 300mm wide and 380mm high. legs shall be of first class teak wood of section 30mmx50mm. the legs shall be 362mm high. 5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position. two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs. two bottom rails of size 20mmx40mm shall be fixed between the legs. a centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg. vaacuum rubber shall be provided at top of legs. the top shall be 12mm thick plate tinted glass white colour with corners rounded as shown drawing comma the edges of top of table shall be rounded off. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge, the leg shall be 60mm x 30mm in section and 497 mm high and shall be of teak wood 5mm x 5mm in section groove shall be provided at the visible portion of the top of legs. top rail of first class teak wood of 20mm x 50mm in section and 510mm long shall be provided between the legs bottom rail of teak wood of 20mm x 50mm in section and 420mm long shall be provided between legs comma widthwise at 100mm above the bottom of legs. a centre rail of size 20mm x 50mm shal also be provided lengthwise at centre in between the side bottom rails irrespective of what is shown on drg 25mm thick and 25mm dia hard rubber pvc rings shall be fixed to the bottom of all legs fixed with 30 mm long screws. top of the table shall be of 18 mm thick exterior grade mdf board both side laminated in light wallnut shade or as approved by ge comma with 4mm thick teak wood beading all round the edges of top. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., 1mm thick ms sheet shall be used to manufacture locker except legs. two legs shall be provided to almirah as shown on drawing and shall be of 1 point 25 mm thick ms sheet. cromium plated stainless steel godrej type handle 100mm long shall be fixed on shutters comma locker shall be fitted with isi marked 75mm 6 lever lock with three way locking system. front shutters shall have two leaves of equal size. locker shall be finished with shade of ta gray colour or as approved ge both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper. rest all as specified shown in drawing and directed by enginer in charge, over all size shall be 915mm long comma 305 mm wide and 1905mm high. frame shall be 40x40x5mm slotted angle iron fixed with nut bolts irrespective of shown in drawing.shelf shall be 1mm thick crca sheet with bottom support of 15x15x3mm angle iron. all steel surface shall be finished with shade of ta gray colour or as approved by ge both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. rest all as per drawing and directed by engineer in charge., overall size shall be 1330 mm long comma 710mm high. the inner frame shall be of 50mmx20mm teak wood battens six in nos . the back and front of frame shall be covered with 6mm thick commercial ply. the edges of the frame shall be covered with 6mmx35mm teak wood edging fixed alround the frame with headless nails and adhesive. six brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg. 5mm thick looking mirror shall be provided as shown on drg with beading alround . mild steel key plate shall be provided at both top corners of the hat stand. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces . all steel surfaces shall be painted with two coats of enamel paint over a coat of primer. rest all as per drawing and directed by engineer in charge., the frame of the chair shall be of 16 gauge 25mm dia ms tubular frame powder coated. back shall be designed with contoured lumber support for extra comfort. 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with pvc lippling alround shall be provided at seat and back. arm rest shall be of black integral skin poly urethane with shore a hardness and reinforced with ms insert. it shall be scratch and wheather resistant. both hand rest section shall have inner and outer dia of 210mm and 230mm respectively and have slope towards front. rest all as specified shown in drawing and directed by engineer in charge., table dining round shape 1200mm comma high 760mm shall be first class seasoned teak wood free from knots and defects. hard rubber oblique nylon buffers shall be fixed at the bottom of 04 legs of 30x40mm with brass screws comma top shall be 18 mm thick teak wood with12mm thick glass top. chair dining long back and cushion overall size shall be 450mm wide at bottom legs level and 455mm deep and 1200 mm high. all timber work shall be first class seasoned teak wood free from knots oblique defects. front legs shall be of size 25mmx50mm in section and 450mm high and rear legs shall be of section 65mmx50mm made to shape. the front and rear legs at seat level shall be joined by 40 mm x 20 mm in section side rails provided at 450 mm from bottom legs. the top of side rails shall be at 450 mm from bottom of legs. two side stiffeners of 25 mm x 40 mm in section shall beprovided joining front and rear legs. the bottom side stiffeners shall be 100 mm above the bottom of legs. a middle stiffener of 25 mm x 40 mm in section joining the side stiffeners in middle shall be provided as shown on drg. for seat cushion comma a frame shall be made with 75 mm x 20 mm in section front and rear wooden horizontal rails comma joined by 40 mm 20 mm in section wooden side rails. 70mmx 10mm batten shall be provided in the middle. 45 mm x 10 mm batten shall be provided with three equal gaps. 50 mm thick comma 32 density foam shall be provided to the chair which shall be covered with leatherised rexine tapestry cloth not less than rs 500 by mtr of best quality as approved by ge. rails of 45mmx25mm in section shall be 40mm apart from legs and joined by 10mm dia teak wood in vertical and 12mm dia teak wood in horizontal. back shall have vertical battens 20mmx25mm in section., overall size shall be 470mm wide comma 445mm deep and 1040mm high. tall timber work shall be first class seasoned teak wood free from knots oblique defects. front legs shall be 50x50mm at top and 40x40mm at bottom. rear legs shall be 95x50mm. the seat of the chair shall be woven in godrej pattern with 2mm wide 0 point 25mm thick best quality cane. all diamensions comma shape and size shall be followed as per drg. all joints comma fixing shallbe done in accordance with standard specifications. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge, as per trade pattern and directed by enginer in charge, body of the bin linen multipurpose comma shelves comma drawers comma shutters shall be made of 19mm thick exterior grade mdf board both side laminated. shade as approved by ge back shall be 12mm thick plywood sides back and bottom of drawers shall be of 12mm thick mdf board bothside laminated shade as approved by ge. 4mm thick teak wood edgig shall be provided to all edges of mdf board. ss handle and ss knobs as approved by ge shall be approved for shutter and drawers. drawers shall be supported with telescopic channel for smooth functioning 75mm high skirting shall be provided by 19mm thick teak wood as shown in drawing. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., as per trade pattern and directed by enginer-in-charge., top shall be made of teak wood with size of legs as 45mmx45mm at top and 30mmx30mm side stiffners of size 40x19mm. the top portion shall have be provided with teak wood frame made of 74mmx19mm batterns frame as shown in drg. the bottom of top frame shall be provided with asbestos sheet plain. the two shleeves fitted inside the hot case shall be made of 4mm dia wire mess welded to 12x3mm flat iron frame as shown. the inner sides/shutters including top and bottom of hot case shall be fitted with aluminium sheet lining allround. the shutters shall be fixed with aluminium hinges and each shutter shall be provided with dimentions comma shape and size shall be followed as per drg. all joints fixing shall be done in accordance with standard specification. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., as per trade patern and directed by enginer in charge., as per trade patern and directed by enginer in charge, as per trade patern and directed by enginer-in-charge, all steel member shall be 18 gauge ms pipe. the frame of head board and foot board shall be of 38mm ms square pipe. 18mm ms square pipe shall be provided in the inner of head or foot board frame as shown in drg. 18mm thick both side prelaminated mdf board of walnut shade with 4mm thick teakwood beading shall be screwed to ms strip arc welded with 18mm thick square pipe with standard workmanship both in head/foot board. one stiffener of size 25mmx25mm shall be welded between the two legs of head board over 150mm from the ground level. the top of bed hard shall be of 12mm thick bwr grade plywood of approved make fixed over the four equidistant stiffener of size 25mmx25mm sq ms pipe in line with bottom of 25x65mm long rail section. pvc shoes shall be provided to legs of bed. all steel members shall be finshed with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper in black colour. rest all as per drawing., overall size shall be 1270mm high comma 765mm wide and 440mm deep. 1mm thick ms sheet shall be used to manufacture almirah except legs. two legs shall be provided to almirah as shown on drawing and shall be of 1 comma 25 mm thick ms sheet. cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters comma almirah shall be fitted with isi marked 75mm 6 lever lock with three way locking system. front shutters shall have two leaves of equal size. the almirah shall be finished dry powder coated in double shade different colour after properly smoothening the surface or as approved by ge both internaly and externaly. rest all as specified shown in drawing and directed by enginer in charge., overall size shall be 1230mm long. 300mm wide and 760mm high. all wood shall be of first class teak wood . the legs shall be made to shape out of 50mmx100mm teak wood. the legs shall be 100mm high. the two long rails of 50mmx50mm in section and 1230mm long shall be provided for support of body of book case. the two long rails shall be joined with 25mmx50mm stiffeners at 150mm from each end joining the long rails. 19mm thick pre laminated mdf board shall be provided at bottom comma top comma sides shelves and vertical partitions. the back shall be of 6mm thick ply wood. the top comma shelves comma bottom and vertical partitions shall have 1 comma 5mm plastic laminated sheet fixed over the mdf board. the vertical partition shall have plastic laminated sheet on both sides. the shelves shall have plastic laminated sheet on top only. the top and bottom of book case shall have plastic laminated sheet on top only. the sides shall have plastic laminated sheet on both sides. the fornt edges of sides comma shelves comma vertical partition and top shall be covered with 3mmmm thick teak wood edging. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., the overall size of the chair shall not be less than 460mm wide 600mm deep and 355 mm high to seat from ground level and over all height 760mm. the frame of the chair verendah shall be made up of 20mm dia conduit piupe of wall thickness 1 point 6mm. seat and back of the chair shall be woven with virgin plastic cane 4mm wide and 0 point 6mm thick half round in true godrej pattern weighing not less than 6 gms in ten running meters. pvc hard rubber shoe shall be provided to each leg of chair verendah. the chair shall be powder coated in white colour after preparation of surface or as approved by ge. rest all as specified shown in drawing and directed by engineer in charge., overall size shall be 510mm long comma 575mm wide and 720mm high. all wood shall be seasoned first class teak wood free from knots and defects. hard nylon buffers shall be fixed at the bottom of legs with brass screws. canning of chairs by true godrej pattern with plastic cane 2mm to 2.5mm wide comma white colour coma quality as approved by ge all as specified and as shown on drgs. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by engineer in charge., the overall size shall be 440 mm wide x 430mm deep and 460mm high from front and 890mm high from back. all teak used shall be 1st class hard teak wood. pvc hard rubber ring of dia 25mm shall be provided to bottom of each leg with 20mm long screw. canning shall be done in true godrej pattern with virgin plastic cane of 2mm wide 0 point 6mm thick half round gola type weighing not less than 6 gms in ten running meters with border woven with 4mm thick plastic cane. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., overall size shall be 535mm long comma 470mm wide and 890mm high. well seasoned teak wood throughout in frame work shall be used for framework comma caning shall be done without any joint in the cane. the cane shall be of 2mm wide comma 0 point 4mm thick half round gola type of shah or equivalent brand. the sides of the chair shall be canned with 4mm thick cane. hard rubber rings of 25mm dia and 25mm high shall be screwed to the bottom of all legs. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., overall size shall be of 585 mm wx300 mm dx738 mm h. 25mm dia 16 gauge ms tube shall be provided for steel frame. synthetic enamel paint colour black shall be applied two coats over a coat of primer. 1st class teak wood shall be used for hand board. one piece pvc seat and back shall be provided. all diamensions comma shape and size shall be followed as per drg. all joints comma fixing shall be done in accordance with standard specifications. rest all as per drawing and directed by engineer in charge., overall size shall be 24 feet x 15 feet long. it shall be made up of heavy cotton fringes losely woven and knitted in rectangular pieces fringed at the ends having cotton backing .the nominal thickness of the durrie shall not be less than 5mm. as per sample approved by ge, overall size shall be 700mm long comma 300mm wide and 880mm high. main frame shall be 25mm dia 18 guage ms pipe. shelf frame shall be 19mm dia 18 guage ms pipe and covered by 3mm dia ms rods three in length wise and nine in width wise. all steel and iron surface shall be finished with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer after preparation of surfaces. rest all as per drawing and directed by engineer in charge., over all size of the rack shall be 2745mm length comma 760mm depth and 1905mm high. storage solutions mild steel heavy duty storage racks with 4 shelves . as per the trade pattern and directed by engineer in charge., the set consist of one long piece of three seater and two small pieces of single seater. as per trade pattern and directed by engineer in charge., overall size shall be 450mm long comma 300mm wide and 380mm high. all wood shall seasoned first class teak wood free from knots and defects. hard nylon buffers shall be fixed at the bottom of legs with brass screws. h type leg stiffeners shall be provided for better support. top shall be 18 mm thick exterior grade mdf board one side laminated in light wallnut shade or as approved by ge comma duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified/ shown in drawing and directed by enginer in charge., overall size shall be 650mm long x 500mm wide and 750mm high. the sides comma back comma shelf and front openable shutters shall be of 18mm thick prelaminated mdf board.the front shutters shall be of 5 point 5 mm thick glass shutter with magnetic catcher.brass handle and door catchers shall also be provided to the tv trolley as described on drg. the pull out drawers shall be provided with two telescopic channel.the top of the trolley shall be of 18mm thick prelaminated mdf board of size 750mmx600mm.50mm dia swivel type castors 4 in numbers shall be provided at base. 4mm thick teak wood beading shall be fixed allroung the edges of the top. rest all as specified shown in drawing and directed by enginer in charge, overall size shall be 2440mm long comma 600mm wide and 300mm high. two long angle iron 40mmx40mmx6mm of mild steel 1980mm long shall be provided 520mm apart at bottom connected with 50mm x 3mm iron bracing comma four in numbers comma and equally spaced with 50mm x 50mmx6mm iron. all steel and iron work surfaces shall be painted with two coats of enamel paint over a coat of primer with spray machine after preparation of steel surfaces on exposed to view when placed in position. rest all as specified shown in drawing and directed by enginer in charge, table dining 6 pers. overall size shall be 1500mm long comma 900mm wide and 750mm high. all wood shall be of first class teak wood. the top shall be of prelaminated mdf board of 18 by 19mm thick with 4mm thick teak wood beading alround the edges of the top fixed with headless nails and adhesive on long sides only., table dining 8 pers. overall size shall be 1800mm long comma 900mm wide and 750mm high. all wood shall be of first class teak wood. the top shall be of prelaminated mdf board of 18 by 19mm thick with 4mm thick teak wood beading alround the edges of the top fixed with headless nails and adhesive on long sides only.
Agency / Dept :
indian army
Due Date :
Jul 27, 2026
Tender Value :
64.96L
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Vertical Machining Center. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Vertical Machining Center sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Vertical Machining Center Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Vertical Machining Center, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Vertical Machining Center Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Vertical Machining Center Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Vertical Machining Center.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Vertical Machining Center depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Vertical Machining Center Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Vertical Machining Center bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Vertical Machining Center. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Vertical Machining Center, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Vertical Machining Center, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Vertical Machining Center?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Vertical Machining Center tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Vertical Machining Center?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Vertical Machining Center, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Vertical Machining Center is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All