sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

41Latest Vacuum fan Tenders List

Latest Vacuum fan Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Vacuum fan tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Vacuum fan tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Vacuum fan Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Vacuum fan tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Vacuum fan Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Vacuum fan Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Vacuum fan Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Vacuum fan tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Vacuum fan Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Vacuum fan sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Vacuum fan tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Vacuum fan tenders.

Is EMD mandatory for all Vacuum fan tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Vacuum fan work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Vacuum fan tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Vacuum fan Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17564606
Location : begusarai , bihar
Source : GEM Tenders
NEW TENDER
corrigendum tender for m1607070005 heavy duty industrial exhaust fan 450mm , m7200090009 cable pvc copper 3c x2.5 sqmm flexible , m7200140011 4cx2.5 sq. mm armored fleexible copper , m7200150007 flexible pvc frls 3cx1.5 sq.mm cu , m7304030019 mcb 63 a. four pole type c curve , m7304030076 mcb dp 32a c curve 10ka , m7304060002 rccb 63a 4 pole 30 ma , m7304060009 2p 16amp rccb 30ma , m7401000008 200watt led flood light wall mounted , m7401000026 100w led flood light fix ip65 240vac , m7403030002 supply extension boards , m1501090001 industrial wet and dry vacuum cleaner , m9785150001 air blower corded , m7601250121 heat gun or hot air blower 1800 to 2000w 1 ph , m7610900309 cordless impact wrench gds 18v200c, procurement of miscellaneous electrical items, m1607070005 heavy duty industrial exhaust fan 450mm, m7200090009 cable pvc copper 3c x2.5 sqmm flexible, m7200140011 4cx2.5 sq. mm armored fleexible copper, m7200150007 flexible pvc frls 3cx1.5 sq.mm cu, m7304030019 mcb 63 a. four pole type c curve, m7304030076 mcb dp 32a c curve 10ka, m7304060002 rccb 63a 4 pole 30 ma, m7304060009 2p 16amp rccb 30ma, m7401000008 200watt led flood light wall mounted, m7401000026 100w led flood light fix ip65 240vac, m7403030002 supply extension boards, m1501090001 industrial wet and dry vacuum cleaner, m9785150001 air blower corded, m7601250121 heat gun or hot air blower 1800 to 2000w 1 ph, m7610900309 cordless impact wrench gds 18v200c
Agency / Dept :
hindustan urvarak and rasayan limited HURL
Due Date :
Oct 05, 2026 (3 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17567752
Location : uttara kannada , karnataka
Source : GEM Tenders
NEW TENDER
tender for guard soldering iron (n0565-4218154) , fan table 16" (n0565-1278297) , cordless drilling machine (n4110- p061836) , drilling machine 3/8 (n0565-4119169) , drilling machine 3/4" 220/250v (n0565-4119174) , refrigerator 230 ltrs (n4110-000201) , deep freezer cap 400 ltrs (n4110-p061814) , water cooler capacity 150 ltrs (n4110-p061877) , fan circulating desk 230 v ac 18" blade sweep 200 mm (n4140-000070) , vacuum cleaner (n4140-p060018) , drilling machine (n0565-4119167) , wall clock 9' (n0552-0000723)
Agency / Dept :
indian navy
Due Date :
Oct 22, 2026 (20 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17471780
Location : mysore , karnataka
LIVE TENDER
tender for supply of spares expansion joint for wire suction tube vacuum fan outlet; type: fabric / non metallic, expansion joint for wire suction tube vacuum fan inlet; type: fabric / non metallic, expansion joint for dry suction box vacuum fan outlet; type: fabric / non metallic, expansion joint for dry suction box vacuum fan inlet; type: fabric / non metallic, expansion joint for cylinder mould/ shortformer vacuum fan; type: fabric / non metallic for vacuum blowers at bnpm plant, mysore
Agency / Dept :
bank note paper mill india private limited BNPM
Due Date :
Oct 05, 2026 (3 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17442553
Location : rourkela , odisha
Source : GEM Tenders
LIVE TENDER
tender for 35210009004543 compressor capacity 1 5tr f r 32 , 35210009004544 compressor capacity 2 0 tr f r 32 , 51910209000018 thermostat water cooler type u50 2064 , 35210009001774 thermostat mm u 50 2059 , 35210009004690 single phase preventor f tower ac ma51bc , 35210009004694 compressor relay 220 230vac 4 7a , 60210859000873 pump high vacuum portable 230v 10 , 35210009004314 universal pcb with remote f split ac , 35210001000119 condenser coil f window ac 1 5t voltas , 71450007030205 valve pres relief f refrigerant 22 , 51010201251305 gauge pressure range 30 hg 0 150psi , 51010201251306 gauge pressure discharge range 0 300psi , 35210009004702 sensor coil temp 20 to 100deg 5k 100k , 35210009004703 sensor air temp 40 to 105 deg cent 10ma , 35210009004701 contactor single pole 25a 230v split ac , 35210009004132 condenser coil f ac 4501716 1 5t voltas , 35210009003878 o d unit fan motor cw 1 5t split ac 65w , 35210009004319 cooling coil washer 7 10bar 220v 4l min , 51910009000086 drier liquid line conn 5 8x5 8in flare , 35210009001803 compressor rotary sealed f 1 5t ac , 35210009003356 air cooled condenser f split ac cap 2tr , 35210009003879 o d unit fan motor ccw 1 5t split ac 65w , 35210009001806 runner impeller f a c cap 1 5t 7 5 8in , 50510401001675 capacitor 50mfd 5 440vac , 50510401001480 capacitor 2 5mfd 440vac 40to 85deg c , 50510401001485 capacitor 10mfd 5 500vac, room ac spares 123, refer specification sheet
Agency / Dept :
steel authority of india limited SAIL
Due Date :
Oct 05, 2026 (3 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17464191
Location : jodhpur , rajasthan
Source : GEM Tenders
LIVE TENDER
tender for revolving chair , exhaust fan , glass top for table , ss clutch wire for mosquito net 3mm , bush cutter petrol 4 stroke , lawn mower , dual motor vacuum cleaner , appointment board, revolving chair, exhaust fan, glass top for table, ss clutch wire for mosquito net 3mm, bush cutter petrol 4 stroke, lawn mower, dual motor vacuum cleaner, appointment board
Agency / Dept :
indian army
Due Date :
Oct 05, 2026 (3 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17466062
Location : charkhi dadri , haryana
Source : GEM Tenders
LIVE TENDER
tender for laptop i5 13th gen 16 gb 512 gb 15.6 inch win 11 , office almirah , file cover , pendrive 256 gb , laser printer , copier paper , bond paper , office chairs , center table with glass top , revolving chair , wall fan , ceiling fan , serving tray , tea cup , drinking water glass , extension board , milton vacuum flask , foot mat , whiteboard , teacher table , teacher chair , shoe rack , rack , display board , towel , soap , dustbin plastic , steel plates , spoon , flash card , parts of body slate , shape slate , plastic beads set , clay set , coloured and numbered rods of wood , sandpaper cards , arithemetic board , brown stairs to identify size differentiation , mystery bag , knobbed cyllinders , coloured box , geometric shapes puzzle , masks , wall painting , led tv, comprehensive office and educational infrastructure supplies, laptop with intel core i5 13th generation or equivalent processor minimum 16 gb ram minimum 512 gb ssd 15.6 inch full hd display integrated graphics wi fi bluetooth usb ports including usb 3 or higher hdmi or equivalent display output hd webcam built in microphone and speakers standard keyboard and touchpad windows 11 operating system ac adapter and charger and standard manufacturer warranty, steel office storage almirah made from crca ms steel sheet minimum zero point 6 mm thickness or equivalent powder coated finish approximately 1800 to 2000 mm height suitable width and depth for office use minimum 4 adjustable shelves hinged doors with locking arrangement handles and required hardware sturdy construction and corrosion resistant finish, office file cover made of durable paperboard cardboard or equivalent material suitable for a4 size documents minimum 250 gsm or equivalent with flap string or suitable fastening arrangement suitable for regular office record keeping and filing, usb flash drive with minimum 256 gb storage capacity usb 3 or higher interface compatible with windows operating systems and commonly used computers plug and play operation compact design and suitable read and write performance for general office data transfer, monochrome laser printer suitable for office use a4 paper size minimum 20 pages per minute printing speed minimum 600 by 600 dpi resolution usb connectivity and or network connectivity automatic or manual duplex printing standard input paper tray and compatible toner cartridge system, a4 size photocopy and printing paper approximately 75 gsm or higher suitable for laser and inkjet printers and photocopy machines good opacity and smooth finish suitable for double sided printing and general office use packed in standard reams, high quality bond paper suitable for office printing approximately 75 gsm or higher a4 size or as required smooth surface suitable for laser and inkjet printing and photocopying good brightness and suitable for official correspondence and documentation, ergonomic office chair with durable cushioned seat and backrest upholstered with fabric or mesh or equivalent height adjustable seat pneumatic gas lift mechanism sturdy base with suitable castor wheels back support armrests where applicable and suitable for prolonged office use, office centre table with sturdy metal wood or engineered wood frame tempered glass top of suitable thickness smooth finished edges stable construction suitable dimensions for office and reception use and corrosion resistant and scratch resistant finish as applicable, revolving office chair with cushioned seat and backrest adjustable height using gas lift mechanism 360 degree rotation sturdy five star base with castor wheels suitable back support durable upholstery and suitable for regular office use, electric wall mounted fan approximately 400 to 450 mm sweep minimum 3 speed operation oscillation facility suitable air delivery for office use durable blades protective safety grill suitable motor with thermal protection and 230 v ac 50 hz operation, ceiling fan suitable for office use approximately 1200 to 1400 mm sweep 230 v ac 50 hz minimum 3 speed operation suitable air delivery energy efficient motor balanced blades safety features and complete with suitable down rod canopy and mounting accessories, serving tray made of durable food grade plastic stainless steel or equivalent material suitable for office serving purposes rectangular or oval design raised edges easy grip handles or suitable holding arrangement easy to clean and resistant to regular wear, tea cup made of ceramic porcelain or equivalent food grade material suitable capacity approximately 150 to 200 ml smooth glazed finish durable construction easy to clean and suitable for regular office use preferably supplied with matching saucer where applicable, drinking water glass made of food grade glass or equivalent material transparent durable and suitable for regular office use approximately 250 to 300 ml capacity smooth rim and easy to clean, electrical extension board with minimum 4 or more universal or standard sockets suitable for 230 v ac operation individual or master switch indicator adequate length flexible cable suitable current rating insulated body overload and surge protection where applicable and proper safety provisions, vacuum insulated flask made of food grade stainless steel or equivalent material double wall vacuum insulation suitable for maintaining hot and cold beverages approximate capacity 1 litre leak resistant lid and cap durable outer body easy to clean and suitable for office use brand neutral specification equivalent products acceptable, floor and foot mat suitable for office entrance or indoor use made from durable pvc rubber coir or equivalent material anti slip backing water and dust absorbing or scraping surface as applicable washable and easy to clean suitable size and resistant to regular foot traffic, frame material durable metal or alloy compliant with relevant industry standards writing surface high quality laminated surface suitable for dry erase applications board dimensions approx l by w for example 1200 mm by 2400 mm core material thickness approx 4 mm with standard tolerance frame thickness approx 1 point 2 mm with minimal tolerance, table is to be made of particle board termite resistant action tesa board table should be made with gable panel a drawer with telescopic channels with lock and a locker with a single door with hinges should also be accommodated in the table dimensions of the table should not be less than 900 mm by 600 mm l by d color of the prelaminated particle board should be dark brownish shade, chair type fixed non revolving and non tilting with integrated armrests base structure cantilever design for stability frame material durable metal or alloy with corrosion resistance tubular section shape round or equivalent structural design understructure diameter approx 19 mm with standard tolerance understructure wall thickness approx 1 mm seat material high density pu foam or equivalent seat foam density up to 30 kg per cubic metre seat foam thickness minimum 50 mm seat height from floor up to 400 mm seat dimensions approx width greater than 450 mm depth up to 400 mm seat upholstery durable fabric such as polyester backrest frame material sturdy injection molded plastic backrest material breathable mesh or equivalent backrest dimensions width 400 to 450 mm height 450 to 550 mm from seat level backrest upholstery mesh fabric or similar material armrest design molded armrest integrated with seat and backrest, shoe rack is to be made of particle board termite resistant action tesa make shoe rack should be covered from three sides with the same board with even dimensions shoe rack should have 3 horizontal slabs with a 30 degree downwards slope to safeguard the shoes from falling down color of the prelaminated particle board should be dark brownish shade side panel thickness approx 18 mm for sturdy support top and bottom panel thickness approx 18 mm for structural stability back panel optional depending on design dimensions width approx 800 mm depth approx 285 mm height approx 900 mm, book rack is to be made of particle board termite resistant action tesa make the rack should have a horizontal slab in mid of the empty space in such a way that two equal size compartments are available there should be two front openable doors with hinges in front with lock the rack should be covered from all three sides with two doors in the front the whole design should give the look of a cabinet color of the prelaminated particle board should be dark brownish shade dimensions width approx 850 to 900 mm depth approx 550 to 600 mm height approx 450 to 500 mm, aluminum channels on all 4 sides size 4 feet by 3 feet with acrylic shutter soft pin up board, size width by length 40 cm by 60 cm, common bathroom soap preferably dettol of 40 gm weight, material hdpe bin capacity 10 litres with a non perforated handle with pedal swing, design and features shape rectangular type partitioned plate with three compartments for food separation pattern plain rimless design for easy cleaning and usability dimensions length approx 221 to 260 mm width approx 141 to 180 mm thickness approx 4 mm, stainless steel sheet thickness ranges from 0 point 70 mm to less than 1 point 00 mm ensuring durability and lightweight handling dimensions height 100 mm to less than 150 mm suitable for varied beverage capacities top diameter 75 mm to less than 100 mm allowing comfortable grip and usability, stainless steel spoon dimensions approx 170 mm to 210 mm in length with a bowl width of 35 mm to 45 mm, flash card set includes 26 cards along with a cover content english with prominent photographic images on one side and corresponding information on the other material durable flash card dimensions approx 180 mm by 210 mm flash card thickness approx 0 point 3 mm cover card dimensions approx 180 mm by 210 mm cover card thickness approx 0 point 3 mm, thickness approx 10 mm different body parts precisely cut on the soft wood sheet with a pull out knob on each piece length approx 200 mm width approx 250 mm packed in poly pack, thickness approx 10 mm different geographical shapes cut on the soft wood with pull out knob on each piece length approx 200 mm width approx 250 mm packaging type secure poly based packaging, material and design bead material durable plastic or equivalent synthetic material bead colors assorted colors such as green blue white red orange yellow lace colors assorted colors matching the beads types and quantity counting bead types small and large beads strung on a lace total number of beads 100 consisting of 50 small and 50 large dimensions small bead diameter approx 10 mm large bead diameter approx 25 mm packaging pack quantity 1 set per pack one set corresponds to 50 beads of each size strung on a lace to make a garland shape, texture soft smooth and easy to mold safety non toxic 5 pcs of clay set per pack different colors red green blue yellow, material and construction material made of high quality solid wood with a smooth child safe finish color alternating red and blue segments for visual differentiation set includes 10 wooden rods each divided into equal segments rod lengths progress in increments of 5 cm starting from 5 cm to 50 cm segment size each alternating color section measures 5 cm, multicolor dimensions approx 15 cm by 9 cm by 15 cm numbering 1 to 9, wooden puzzle picture board number wooden jigsaw puzzle 1 to 10 with knobs product dimensions width approx 22 cm height approx 3 cm depth approx 30 cm, weight 2 kg dimensions 16 point 25 cm by 7 point 62 cm by 41 point 40 cm cuboidal blocks 10 wooden case 1, educational objective shape recognition and sensory learning the set includes 14 wooden blocks in 7 different shapes and a cotton or non woven bag of the appropriate size to store the wooden blocks material wood or equivalent durable material color multicolor product dimensions approx 14 point 5 cm by 8 cm by 8 cm weight approx 260 g, material and design made from high quality solid wood with a smooth child safe non toxic finish in a natural wood tone each set includes 4 wooden blocks each with 10 knobbed cylinders designed for pincer grip development variations and dimensions the blocks differ in height diameter or both to introduce size and weight concepts each block measures approx 45 cm in length with cylinders varying in height and diameter based on block type storage plastic shrink, all in 1 colors box color pencil crayons water color sketch pens set of 60 to 70 pieces color box with multiple colored pens crayons water colors oil pastes pencils easy to sharpen standard sized colored pencil, design and components material made from high quality durable wood with a smooth finish color brightly colored red blue yellow and green pieces to enhance visual learning surface finish non toxic lead free paint ensuring child safety base board sturdy rectangular board with pegs for stacking shapes included 4 geometric shapes circle triangle square and rectangle, animal mask for kids random 6 shapes dimensions length by width by height 20 point 3 cm by 15 point 2 cm by 0 point 3 cm 6 shapes in a set the masks should be made of sturdy plastic frp or equivalent material but not from paper, designated room is to be painted scope of work shall include sanding of the walls with pop on the damaged areas painting on all four walls roof all windows doors ventilation ducts corridor walls pillars desired cartoon characters or slogans are to be hand painted on the walls approx dimensions of the room are 18 feet by 24 feet by 12 feet length by width by height prospective bidder may visit the school campus on any working day during school hours to physically measure the service area submission of rates shall be deemed as the bidder has visited and understood the scope of work, smart led tv 43 inch
Agency / Dept :
department of primary education
Due Date :
Oct 10, 2026 (8 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17314697
Location : chandigarh , chandigarh
Source : GEM Tenders
LIVE TENDER
tender for tata vehicle spare parts piston set , piston ring set , cylinder linner set , main bearing set 010 inch , big end bearing 010 inch , con rod bush , thrust washer , valve inlet and exhaust , valve guide inlet and exhaust , engine oh gaskit com with head gaskit b iv , valve oil seal inlet and exhaust , crank oil seal rear , heater plug , timing belt , oil pump assy , water pump assy , thermostate valve , temp sending unit , oil pressure switch , oil jet with packing , tensioner , fan belt alternator , fan belt power steering , clutch disc with pressure plate , clutch relese bearing , pilot bearing , tensioner timing belt , idler timing belt big , hla , crank sensor , cam sensor , rail pressure sensor , oil seal crank shaft front , air filter element , oil filter , fuel filter , o ring injector , leak of rail injector , high pressure pump fip , injector , concentric slave cylinder , suction unit assy fuel pump and gauge , turbo charger assy , idler timing belt small , parking brake cable comp , assy lower link with bush , front shock absorber , rear shock absorber , engine mounting assy , gear liver bush kit , wiper blade , front brake disc pad , rear brake disc pad , parking brake shoe , bonet cable and lever , wheel nut , front door lock lh , rear door lock , hub cap front , foot mat set , clamp all type , injectior coupler , tie rod end set , clutch master cylinder , solenoid switch self , carbon brush plate self , gun matel bush self , alternator cut out , main bearing set , big end bearing , assy rff and hla dicor , injector washer copper , heater plug coupler , fuel return pipe injector to fip , vacuum pump , vacuum pump packing , crank gear , vibration dumper assy , coolant hoses , clutch slave cylinder with bleeder , cartradge fuel filter , head light assy lh , head light assy rh , rain visor , packing paper , bonnet shocker , rear wheel cap , front wheel cap , ac filter , pipe assy clutch hydraulic line clutch master to slave cylinder pipe , fuse box assy battery mounted , fuel injector , fuel pump assy , clutch slave cylinder , clutch pressure plate , fan belt 5pk , fan belt 6pk , fuel return pipe , gear lever kit , steering uj cross , drain nut , fuel filter assy fine filter 12 volt , fuel filter assy protect filter 12 volt , oil filter bs 6 , air filter element primary , air filter element safety , grease nipple , t monogram, piston set, piston ring set, cylinder linner set, main bearing set 010 inch, big end bearing 010 inch, con rod bush, thrust washer, valve inlet and exhaust, valve guide inlet and exhaust, engine oh gaskit com with head gaskit b iv, valve oil seal inlet and exhaust, crank oil seal rear, heater plug, timing belt, oil pump assy, water pump assy, thermostate valve, temp sending unit, oil pressure switch, oil jet with packing, tensioner, fan belt alternator, fan belt power steering, clutch disc with pressure plate, clutch relese bearing, pilot bearing, tensioner timing belt, idler timing belt big, hla, crank sensor, cam sensor, rail pressure sensor, oil seal crank shaft front, air filter element, oil filter, fuel filter, o ring injector, leak of rail injector, high pressure pump fip, injector, concentric slave cylinder, suction unit assy fuel pump and gauge, turbo charger assy, idler timing belt small, parking brake cable comp, assy lower link with bush, front shock absorber, rear shock absorber, engine mounting assy, gear liver bush kit, wiper blade, front brake disc pad, rear brake disc pad, parking brake shoe, bonet cable and lever, wheel nut, front door lock lh, rear door lock, hub cap front, foot mat set, clamp all type, injectior coupler, tie rod end set, clutch master cylinder, solenoid switch self, carbon brush plate self, gun matel bush self, alternator cut out, main bearing set, big end bearing, assy rff and hla dicor, injector washer copper, heater plug coupler, fuel return pipe injector to fip, vacuum pump, vacuum pump packing, crank gear, vibration dumper assy, coolant hoses, clutch slave cylinder with bleeder, cartradge fuel filter, head light assy lh, head light assy rh, rain visor, packing paper, bonnet shocker, rear wheel cap, front wheel cap, ac filter, pipe assy clutch hydraulic line clutch master to slave cylinder pipe, fuse box assy battery mounted, fuel injector, fuel pump assy, clutch slave cylinder, clutch pressure plate, fan belt 5pk, fan belt 6pk, fuel return pipe, gear lever kit, steering uj cross, drain nut, fuel filter assy fine filter 12 volt, fuel filter assy protect filter 12 volt, oil filter bs 6, air filter element primary, air filter element safety, grease nipple, t monogram
Agency / Dept :
indo tibetan border police ITBP
Due Date :
Oct 03, 2026 (1 day left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17421699
Location : bardhaman , west bengal
Source : GEM Tenders
LIVE TENDER
tender for stand a4 size acrylic , table glass 4 by 1.5 feet , set up box stand , ro water purifier , tea cup set , army cdr photo with frame , table flag cloth type , brass stand for table flag , coas photos , flag 6 by 4 feet national coas and comd , executive chair black , anti mosquito racket , steel plate 36 by 6 cm , analog wall clock , cona stand with 17 corps flag , glass water bottle 550ml , history bd horizontal , velvet cloth for tray , combat cloth cover for glass , push pull steel plate , corps logo steel , pedestal fan , leather pen stand large , white apex , thinner , brush 4inch or 5 inch , glass shelf 17 by 7 inch , document folder , hot pot casserole 1350 or 2300 or 3200 ml , table glass 8 mm 6 by 3 , name cutting vinyle , photos new cds , white bd 3 by 4 , brass name plate , leather pen stand , visitor chair black net type , glass for table , dak in out tray , water pipe 90 feet , hanging light , green cloth , otg , gas stove , dinner set vip , cutlery , plastic container 750ml , plastic container 1000ml , plastic container 2.5 ltr , mattress king 78 by 72 by 6inch , mattress queen 78 by 60 by 6 inch , pillow , steel container 10 kg , pvc anti skid mat , double bed sheet , bucket 20 ltr white , mug white , bathing stool white , bucket 20 ltr black , mug black , bathing stool black , hanger folding , air fryer , stainless steel vacuum water bottle , stainless steel tri ply fry pan with cover , insulated thermos water bottle , mixer grinder , mini electric chopper , flower pot glass , juicer aluminium hand press , pressure cooker , fully automatic washing machine , dustbin plastic 50 ltr , plastic dustbin 13 inch , bathroom set soap case brush comb holder , soap dispenser bottle , steel dustbin , hand towels 600gsm , shoe rack wooden , tea pan 2 ltr , cutlery stand big size round , veg basket steel 3 rack , lemon squeezer , chopping board , paper shredder machine , ro meter tds meter , kitchen knife s steel , soup strainer , wooden stool , cloth stand s s , study chair black , garbage bag for steel dustbin , steel name plate , carpet , cushion , ceramic flower matki , wooden frame for tortoise , cycle , toaster , steel name plate 15 by 18 inch , double door refrigerator , fully automatic washing machine 9.5 kg , spoon , wall light warm colour , jump rope , micro air pump for volleyball , chin up bar , dumbell 7 and half kg , dumbell 5 kg , dumbell 2 and half kg , salt pepper stand , bicycle air pump , volleyball , wooden mobile locker 20 nos , calling bell ,, acg items, as per technical specifications
Agency / Dept :
indian army
Due Date :
Oct 03, 2026 (1 day left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17356370
Location : pune , maharashtra
Source : GEM Tenders
LIVE TENDER
tender for supply installation testing and commissioning vrf outdoor unit of 12 hp capacity , supply installation testing and commissioning vrf outdoor unit of 18 hp capacity , supply installation testing and commissioning of vrf indoor units , supply of individual cassette unit , lifting and shifting of outdoor unit , lifting and shifting of vrf indoor units , control cabling , refrigerant piping , drain piping , power cable , plug top , pressure testing and gas topup , fabrication works for odus , testing, installation and commission of individual cassette ac unit , refrigerant piping for individual cassette ac unit , interconnecting control cables for individual cassette ac unit , drain piping for individual cassette ac unit , stand for individual cassette ac unit, vrf ac for canara bank pune circle office, supply, transportation, testing and commissioning of 12 hp (side dischrge cooling only) aircooled type vrv/vrf minimum of one/two/three/four outdoor units comprising of dc scroll/dc twin rotary, inverter driven compressor, air cooled condenser operation on 410a refrigerant gas and on 415v, 50hz, 3 phase ac supply. the multiple compressors offered shall have independent refrigerant circuit, also shall cut off automatically in part load condition. the unit shall have microprocessor controls. the out door units shall be installed on the space alloted in the drawings and scope shall include all supports for the out door units. units shall be factory assembled and only the refrigerant piping shall be carriedout at the site. the noise levels for the out door unit shall be less than 70db(a). the price shall include the vibration isolator, all types of outdoor units connection piping (t- shape and y-shape) kits, required number of outdoor refnurt joints, in pair excluding refrigerant pipe and refregirent gas for the mentioned capacity., supply, transportation, testing and commissioning of 18 hp (top dischrge cooling only) aircooled type vrv/vrf minimum of one/two/three/four outdoor units comprising of dc scroll/dc twin rotary, inverter driven compressor, air cooled condenser operation on 410a refrigerant gas and on 415v, 50hz, 3 phase ac supply. the multiple compressors offered shall have independent refrigerant circuit, also shall cut off automatically in part load condition. the unit shall have microprocessor controls. the out door units shall be installed on the space alloted in the drawings and scope shall include all supports for the out door units. units shall be factory assembled and only the refrigerant piping shall be carriedout at the site. the noise levels for the out door unit shall be less than 70db(a). the price shall include the vibration isolator, all types of outdoor units connection piping (t- shape and y-shape) kits, required number of outdoor refnurt joints, in pair excluding refrigerant pipe and refregirent gas for the mentioned capacity., supply of 1.30 tr round flow vrf cassette unit type indoor units comprising with pre-filter, fan section with low noise fan 3/4 multi speed motor, coil section with dx coil, outer cabinet, drain water lift-up mechanism, insulation, pipe connections etc. of various capacities as per specifications and drawings. panel size should be not more than 950mm square. the rate must include cost of providing wireless remote and required indoor refnurt joints, supply of 1.67 tr round flow vrf cassette unit type indoor units comprising with pre-filter, fan section with low noise fan 3/4 multi speed motor, coil section with dx coil, outer cabinet, drain water lift-up mechanism, insulation, pipe connections etc. of various capacities as per specifications and drawings. panel size should be not more than 950mm square. the rate must include cost of providing wireless remote and required indoor refnurt joints, supply of 2.10 tr round flow vrf cassette unit type indoor units comprising with pre-filter, fan section with low noise fan 3/4 multi speed motor, coil section with dx coil, outer cabinet, drain water lift-up mechanism, insulation, pipe connections etc. of various capacities as per specifications and drawings. panel size should be not more than 950mm square. the rate must include cost of providing wireless remote and required indoor refnurt joints, supply of 2.67 tr round flow vrf cassette unit type indoor units comprising with pre-filter, fan section with low noise fan 3/4 multi speed motor, coil section with dx coil, outer cabinet, drain water lift-up mechanism, insulation, pipe connections etc. of various capacities as per specifications and drawings. panel size should be not more than 950mm square. the rate must include cost of providing wireless remote and required indoor refnurt joints, supply of 0.80 tr round flow compact vrf cassette unit type indoor units comprising with pre-filter, fan section with low noise fan 3/4 multi speed motor, coil section with dx coil, outer cabinet, drain water lift-up mechanism, insulation, pipe connections etc. of various capacities as per specifications and drawings. panel size should be not more than 950mm square. the rate must include cost of providing wireless remote and required indoor refnurt joints, supply of 1.67 tr one way flow vrf cassette unit type indoor units comprising with pre-filter, fan section with low noise fan 3/4 multi speed motor, coil section with dx coil, outer cabinet, drain water lift-up mechanism, insulation, pipe connections etc. of various capacities as per specifications and drawings. panel size should be not more than 950mm square. the rate must include cost of providing wireless remote and required indoor refnurt joints, supply of 2.0 tr cassette type ac unit with copper evaporator coil having 4 way round air flow including all necessary fittings and mountings as specified by the manufacturer. min. 3 star or equivalent energy saving latest model inverter type of toshiba, mitsubhishi, hitachi, daikin, lg, bluestar, carrier, voltas with cordless remote controller with 9 mm thick nitrile rubber pipe insulation with fan and fan motor, machine control panel improved refrigerant joints., lifting, shifting, positioning and installation of 12hp vrf outdoor units from ground floor to terrace of building (g+4) or to the desired location as directed by employer, lifting, shifting, positioning and installation of 18hp vrf outdoor units from ground floor to terrace of building (g+4) or to the desired location as directed by employer, lifting, shifting, positioning of indoor units as mentioned above suitable for vrv/vrf system, from ground level to the desired location on the required floor of the building and their installation, testing and commissioning including providing necessary y joints, supply and installation of control cabling with copper conductor cable (2 core 0.75 sqmm ) with end termination for indoor units, hard copper refrigerant piping of required size for gas suction and liquid. the piping must be supported at every 1.75m with 300mm wide gi perforated cable trays in indoor ducts, shafts wherever required with proper supports, hangers from ceiling, wall as required at site and approved by consultant and duly insulated with closed cell elastomeric nitrile insulation of 19mm thick for pipes above 1 in. and 13mm thick for pipes below 1 in. as per requirement of machines. gi cover to be provided for cable tray on outdoor areas like open terrace and ducts to protect refrigerant piping and insulation. the quoted rates must include for core cutting, chipping, chasing and plastering the wall openings in cement 1 morter 6 of 15 mm thick finishing to line and level with sand facied finishing at all levels, including all leads and lifts, scaffolding, curing etc complete for copper pipe openings in all rooms etc., supply and erection of hard 32mm dia pvc condenseted drain piping for branch connections complete with 9mm thick nitrile insulated including support and wall opening. the piping system supported at every 1.75m with 300mm wide gi perforated cable tray in indoor ducts, shafts wherever required with proper supports, hangers from ceiling, wall as required at site and approved by consultant. gi cover to be provided for cable tray on outdoor areas like open terrace and ducts to protect piping. the quoted rates must include for core cutting, chipping, chasing and plastering the wall openings in cement (1) morter (6) of 15 mm thick finishing to line and level with sand facied finishing at all levels, including all leads and lifts, scaffolding, curing etc. complete for drain openings in all rooms etc., supply and erection of hard 50mm dia pvc condenseted drain piping for header line complete with 9mm thick nitrile insulated including support and wall opening. the piping system supported at every 1.75m with 300mm wide gi perforated cable tray in indoor ducts, shafts wherever required with proper supports, hangers from ceiling, wall as required at site and approved by consultant. gi cover to be provided for cable tray on outdoor areas like open terrace and ducts to protect refrigerant piping, insulation. the quoted rates must include for core cutting, chipping, chasing and plastering the wall openings in cement (1) morter (6) of 15 mm thick finishing to line and level with sand facied finishing at all levels, including all leads and lifts, scaffolding, curing etc. complete for drain openings in all rooms etc., supply and installation of flexible frlsh power cable with end termination for all idu units ( 2/3 rmt for each units ) ( 3 core x 1.5 sqmm ), supply installation testing and commissioning of 15a power plug top of approved make, vacuuming the system, gas topping up of r410a, pressure testing and commissioning of above system, outdoor flat form/stand work for mounting of outdoor units on terrace. if required, ductable units and angle supports to be provided with two red oxide with animal paint, fabrication work for wall hanging mounting stand for outdoor units. if required, ductable units and angle supports to be provided with two red oxide with animal paint, itc of individual 2.0 ton cassette ac unit and fittings duly insulated with 9 mm thick nitrile rubber pipe insulation with, fan and fan motor, machine control panel improved refrigerant joints, .air conditioners shall be fitted with hermetically sealed type suction cooled reciprocating or discharge cooled rotary compressor or scroll compressor. compressor unit operating on -410. all complete as per drawing, approval and instructions of the employer, supplying and laying of extra copper refrigerant piping with nitrile rubber pipe insulation, both of size as specified by the manufacturer suitable for 2.0 tr cassette ac from indoor to outdoor units., supplying and laying of extra electrical interconnecting control cables from indoor to outdoor of size as specified by the manufacturer suitable for 2.0 trcassette type ac., providing and fixing 32mm drain piping up to drain as directed by the engineer in charge with all accessories e.g. elbows, unions, sockets, reducers, reducing tees, nipples etc. complete job including cutting chiseling in walls, fixing with gi clamps,floor and making good of all chases/ cuts etc. and discharging the drain into a floor trap/ gully as per site conditions with insulation, both as specified by the manufacturer., providing and fixing, rigidly at desired location, powder coated readymade stands for odu of 2.0 ton cassette ac
Agency / Dept :
canara bank
Due Date :
Oct 10, 2026 (8 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17545884
Location : mandi , himachal pradesh
Source : GEM Tenders
LIVE TENDER
tender for celling fan 1200 mm , celling fan 600 mm , air blower 750 w , refrigerator 185 ltr , vacuum cleaner 25 ltr , halogen heater 400 w , ro filter with servicing, celling fan 1200 mm, celling fan 600 mm, air blower 750 w, refrigerator 185 ltr, vacuum cleaner 25 ltr, halogen heater 400 w, ro filter with servicing
Agency / Dept :
indian army
Due Date :
Oct 10, 2026 (8 days left)
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Vacuum Fan. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Vacuum Fan sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Vacuum Fan Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Vacuum Fan, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Vacuum Fan Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Vacuum Fan Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Vacuum Fan.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Vacuum Fan depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Vacuum Fan Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Vacuum Fan bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Vacuum Fan. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Vacuum Fan, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Vacuum Fan, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Vacuum Fan?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Vacuum Fan tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Vacuum Fan?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Vacuum Fan, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Vacuum Fan is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All