sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

41Latest Twisting plier Tenders List

Latest Twisting plier Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Twisting plier tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Twisting plier tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Twisting plier Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Twisting plier tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Twisting plier Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Twisting plier Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Twisting plier Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Twisting plier tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Twisting plier Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Twisting plier sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Twisting plier tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Twisting plier tenders.

Is EMD mandatory for all Twisting plier tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Twisting plier work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Twisting plier tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Twisting plier Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17230820
Location : nanauta , uttar pradesh
Source : GEM Tenders
NEW TENDER
tender for hardware no 1 , hardware no 2 , hardware no 3 , hardware no 4 , hardware no 5 , hardware no 6 , hardware no 7 , hardware no 8 , hardware no 9 , hardware no 10 , hardware no 11 , hardware no 12 , hardware no 13 , hardware no 14 , hardware no 15 , hardware no 16 , hardware no 17 , hardware no 18 , hardware no 19 , hardware no 20 , hardware no 21 , hardware no 22 , hardware no 23 , hardware no 24 , hardware no 25 , hardware no 26 , hardware no 27 , hardware no 28 , hardware no 29 , hardware no 30 , hardware no 31 , hardware no 32 , hardware no 33 , hardware no 34 , hardware no 35 , hardware no 36 , hardware no 37 , hardware no 38 , hardware no 39 , hardware no 40 , hardware no 41 , hardware no 42 , hardware no 43 , hardware no 44 , hardware no 45 , hardware no 46 , hardware no 47 , hardware no 48 , hardware no 49 , hardware no 50 , hardware no 51 , hardware no 52 , hardware no 53 , hardware no 54 , hardware no 55 , hardware no 56 , hardware no 57, hardware item, wire braded flexible pipe having both side connectors size- 3and 8inch x 500mm, wire braded flexible pipe having both side connectors size- 3and 8inch x 250mm, wire braded flexible pipe having both side connectors size- 1and 4inch x 500mm, wire braded flexible pipe having both side connectors size- 1and 4inch x 250mm, wire braded flexible pipe having both side connectors size- 3and 8inch x 1dot 5mtr, wire braded flexible pipe having both side connectors size- 1and 2inch x 1dot 5mtr, wire braded flexible pipe having both side connectors size- 1and 4inch x 1dot 5mtr, wire braded flexible pipe having both side connectors size- 1and 2inch x 1mtr, mdot sdot hex bolt bsw size- 1and 2inch x 6inch full thread, mdot sdot hex bolt bsw size- 7and 8inch x 5dot 5inch half thread, anabond 112 thread locker 50 ml, ss pipe 1inch grade 304, hydraulic rubber hose pipe with both end connectors suitable for 200 degree celsius size-3and 8 x 1dot 5mtr, crimped wire wheel dewalt make size-4inch, 25 mm dia 12 mm threaded nylon wire tube clean brush 6dot 5inch cleaning twisted wire brush tube pipe cleaner with handle for tubes ,parts ,bearing dot pipe tube cleaning brush, 15 mm dia 8 mm threaded nylon wire tube clean brush 6dot 5inch cleaning twisted wire brush tube pipe cleaner with handle for tubes parts bearing dot pipe tube cleaning brush, mdot sdot hex bolt bsw size- 3and 4inch x 2dot 5inch full thread, mdot sdot hex nut bsw size-3and 4inch, mdot sdot hex nut bsw size-1and 2inch, mdot sdot hex nut bsw size-7and 8inch, split pin champion make size-1and 2inch x 2inch, spring washer bbbb make size -1and 2inch, rubber hose pipe wire braded heavy duty size-1inch bore, cdot i tyre coupling set px-50, cdot i tyre coupling set px-60, cdot i tyre coupling set px-70, cdot i tyre coupling set px-80, cdot i tyre coupling set px-90, cdot i tyre coupling set px-100, brass ferrule size 5and 16inch, bichoo bolt 3and 8inch x 2-1and 2inch, flexible pipe size 3and 8inch x 1 1and 2inch mtrdot, flexible pipe size 1and 2inch x 1 mtrdot, flexible pipe size 3and 8inch x 1and 2inch mtrdot, flexible pipe size 3and 8inch x 250mm, flexible pipe size 1and 4inch x 1and 2inch mtrdot, flexible pipe size 1and 4inch x 250mm, ss socket 1and 4inch, lock spring od 3and 4inch x length 2inch, ms stud 16mm x 60mm, ms stud 12mm x 50mm, ms nut 16mm, ms nut 20mm, hdot tdot bolt 16mm x 180mm half thread, hdot tdot nut 16mm, air filter regulator size 1and 2inch bsp f 25 micron kushako make or equivalent, plumber block sn-613 jmc make, pvc spray nozzle with socket as per sample, flat ball width 6inch x8 ply, rubber hose pipe 3inch x 21inch, rubber hose pipe 4inch x 21inch, rubber hose pipe 8inch x 18inch, rubber hose pipe 4inch x 18inch, trolley wheel teflon mould size 12inch, ss allen key bolt 10mm x 30mm, copper strip 12mm x 75mm x 2mtr length
Agency / Dept :
uttar pradesh cooperative sugar factories federation ltd UPCSFFL
Due Date :
Sep 22, 2026 (10 days left)
Tender Value :
3.5L
View Documents
T18 Ref No : 16992062
Location : bangalore , karnataka
Source : GEM Tenders
LIVE TENDER
tender for 428134168747 , 425102102203 , 428625108384 , 428625108481 , 428330229805 , 428355125243 , 428355127862 , 428550440369 , 428330227089 , 423399080478, hand tools, adjustable hook spanner size 35 to 50mm length 200 to 225mm thickness 6mm satin chrome finish hinge is fitted with a spring washer for smooth and reliable operation, wire twisting plier for wire locking of metal fasteners with cutter serrated jaws for positive grip jaws angled by 40 deg suitable for locking wire up to dia 1 6mm for clockwise and anti clock wise use with automatic return action length 225 to 250mm, bi hexagonal socket size 8mm 1 by 4 inch square drive overall length 20 to 25mm chrome plated, bi hexagonal socket size 10mm 1 by 4 inch square drive overall length 20 to 25mm chrome plated, ratchet ring spanner size 7 x 8mm overall length 100 to 120mm chrome finish, ratchet ring spanner size 9 x 10mm overall length 130 to 150mm chrome finish, ratchet ring spanner size 12 x 13mm length 160 to 180mm chrome finish, bi hexagonal socket long reach size 3 by 8 inch 1 by 4 inch drive length 50mm high performance steel chrome plated, bi hexagonal socket size 7mm 1 by 4 inch square drive overall length 50 to 55mm chrome plated, allen bit 9 by 64 inch allen bit 1 by 4 inch hex drive 1 inch long
Agency / Dept :
hindustan aeronautics limited HAL
Due Date :
Sep 17, 2026 (5 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17074644
Location : kupwara , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for sqmm as per tech spec , electrode holder for arc welding 600a capacity fully insulated type as per tech spec , plastic jerrican 20 ltr capacity made from hdpe as per tech spec , hss twist drill bit set 25 pcs 1mm to 13mm in 0.5mm increments as per tech spec , wooden handle for pick axe or mattock 900mm lock as per tech spec att , portable petrol chain saw guide bar 22 inch or 550mm as per tech spec att , replacemenent gude bar for chain saw 22 inch or 56 cm cutting length as per tech spec att , hand saw 16 inch or 400mm or 20 inch or 500mm blade length as per tech spec att , aluminium spirit level 12 inch must be rust proof and should have an extruded aluminium profile as per is 5706 of 1993. , paraquat dichloride 24 percentage sl non selective contact herbicide for weed control packing of 5 ltr pack as per tech spec , felling axe 1.0 kg nominal head weight as per tech spec att , felling axe 3.0 kg nominal head weight as per tech spec att , splitting maul or axe 5.0 kg head weight as per tech spec att , knapsack sprayer 15 litr capacity manually operated piston pump type as per tech spec , long handle sickel for tree branch or lopping or pruning blade length 300-350mm as per tech spec , telescopic tree pruner 1.8m to 3.0m extendable length as per tech spec , hand held regar tying tool or twister for 16 swg and 18 swg annealed binding wire as peer tech spec , telescopic ladder 20 ft extended height made from aluminium alloy as per tech spec att , pp nylon rope 24mm of 100 mtr long high strength light weight 3 strand twisted synthetic rope as per tech spec , hacksaw blade double ended, 300mm or 12 inch nominal length flexible grade for hand hacksaw frame as per tech spec , portable drill machine heavy duty,13mm chuck capacity, 650w min power input as per tech spec , barbed wire cutter or fencing plier 10 inch or 250mm, heavy duty combination type as per tech spec , cutting pliers of length 210 mm with high grade steel and serrated jaws and insulated handles , water leveling tube should be made of heavy duty, crystal clear flexible pvc as per tech spec , fawada of size 150 x 275mm made of high tempered iron mild steel as per tech spec , brick hammer with handle of nominal weight 1.2 kg made of high carbon steel fully killed as per tecch spec ,, tools, hand gloves leather of weight 500gm conforming to iso 21420 of 2020 of 1991 as per tech spec, multipurpose non-slip reusable gloves made of premium grade natural latex or synthetic nitrile rubber as per is-4770 of 1991 as per tech spec, shovel square conforming to is 274 part-1 and 2 of 1981 reaffirmed 2003 nose 14 gauge tata high carbon steel as per tech spec, brick trowel steel of professional grade with a blade length of 305 mm precision- forged from a single piece of high carbon steel as per tech spec, measuring tape of length 5m of 19mm width made of steel as per tech spec, measuring tape of length 30m made of steel as per tech spec, heavy duty 18 inch bolt cutter as per tech spec, collapsible y joint 10 ft long fabricated from ms tube as per tech spec att, collapsible y joint 12 ft long fabricated from ms tube as per tech spec att, ratchat spanner single socket 14mm combination type with 75 teeth ratchet mechanism for 5 deg swing arc as per tech spec, ratchat spanner single socket 13mm chrome vanadium steel 72 teeth ratchet, 12-point socket end as per tech spec, ratchat spanner single socket 12mm combination type chrome vanadium steel as per tech spec, iron cutter heavy duty bosch or equivalent as per tech spec att, abrasive cut off wheel 4 inch dia for angle grinder as per tech spec, abrasive cut off wheel 14 inch dia for chop saw 355mmx3.0mmx25.4mm bore as per tech spec, single piece aluminium ladder made from aluminium alloy 63400-wp as per tech spec att, aluminimum straight edge for floor plastering 50mm square 2mm thick and 1800mm long as per tech spec, portable arc welding machine as per tech spec, welding rod swr-10 size 3.15x350mm conforming to is 814 of 2004 as per tech spec, welding machine earthing cable single core flexible copper conductor 70 sqmm as per tech spec, electrode holder for arc welding 600a capacity fully insulated type as per tech spec, plastic jerrican 20 ltr capacity made from hdpe as per tech spec, hss twist drill bit set 25 pcs 1mm to 13mm in 0.5mm increments as per tech spec, wooden handle for pick axe or mattock 900mm lock as per tech spec att, portable petrol chain saw guide bar 22 inch or 550mm as per tech spec att, replacemenent gude bar for chain saw 22 inch or 56 cm cutting length as per tech spec att, hand saw 16 inch or 400mm or 20 inch or 500mm blade length as per tech spec att, aluminium spirit level 12 inch must be rust proof and should have an extruded aluminium profile as per is 5706 of 1993., paraquat dichloride 24 percentage sl non selective contact herbicide for weed control packing of 5 ltr pack as per tech spec, felling axe 1.0 kg nominal head weight as per tech spec att, felling axe 3.0 kg nominal head weight as per tech spec att, splitting maul or axe 5.0 kg head weight as per tech spec att, knapsack sprayer 15 litr capacity manually operated piston pump type as per tech spec, long handle sickel for tree branch or lopping or pruning blade length 300-350mm as per tech spec, telescopic tree pruner 1.8m to 3.0m extendable length as per tech spec, hand held regar tying tool or twister for 16 swg and 18 swg annealed binding wire as peer tech spec, telescopic ladder 20 ft extended height made from aluminium alloy as per tech spec att, pp nylon rope 24mm of 100 mtr long high strength light weight 3 strand twisted synthetic rope as per tech spec, hacksaw blade double ended, 300mm or 12 inch nominal length flexible grade for hand hacksaw frame as per tech spec, portable drill machine heavy duty,13mm chuck capacity, 650w min power input as per tech spec, barbed wire cutter or fencing plier 10 inch or 250mm, heavy duty combination type as per tech spec, cutting pliers of length 210 mm with high grade steel and serrated jaws and insulated handles, water leveling tube should be made of heavy duty, crystal clear flexible pvc as per tech spec, fawada of size 150 x 275mm made of high tempered iron mild steel as per tech spec, brick hammer with handle of nominal weight 1.2 kg made of high carbon steel fully killed as per tecch spec, cross cut saw 8 ft 2400mm long two man as per tech spec
Agency / Dept :
indian army
Due Date :
Sep 23, 2026 (11 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16954573
Location : bashohli , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for hss drill bit set 1 to 12mm , hss drill bit 15 mm , drill bit 16mm hss , hss drill bit 18 mm , drill bit 20mm , hss drill bit 22mm , drill bit 28mm hss , hss taper shank twist drill bit 30mm , hss drill bit 32 mm , hss drill bit with carbide tip straight shank 8 mm dia , hss drill bit with carbide tip straight shank 10 mm dia , hss drill bit with carbide tip straight shank 12 mm dia , carbide drill bit 14mm , drill bit 16 mm with taper shank , gas cutting torch cuttozen5 , cutting nozzle 3 by 64 , gas hose 8 mm dia oxygen and acetylene , gas hose da , flashback arrestor for oxygen gas regulator mounted , flashback arrestor for acetylene gas regulator mounted , cutting nozzle 1 by 16 , tap set with handle 6 to 24mm , centre punch , welding lead copper core 600 amp , welding hand screen or shield lens size 3 point 25 inch x 4 piont 25 inch , angle grinder ag5 1000w , grinding wheel 180 mm , grinding wheel 5 inch , cutting wheel 180 mm , cutting wheel 125mm , flexible shaft grinder , burr cutter set of 5 nos , chipping hammer , safety helmet , hammer 3 kg , hammer 5 kg , hammer 1 point 5 kg , welding electrode e 7018 low hydrogen size 4 mm , welding electrode e 7018 size 3 point 15x350 mm packet 90 nos , welding electrode size 3 point 15mm x 350mm e6013 ador make 2 point 5kg or pkt , welding electrode e308 3 point15 x 350 , welding electrodes e309 mo16 3point15 mm , engine oil sae30 , vertical staff gauges , paint marker pen , mouse pad , spray wd40 , rubber solution 200ml , ms angle 40 x 40 x 5 , mild steel square pipe 40x40 mm 4 mm thick , d spanner set 6x7 8x9 10x11 12x13 14x15 16x17 18x19 20x22 21x23 24x27 25x28 30x32 , ring spanner set size 6x7mm 8x9mm 10x11mm 12x13mm 14x15mm 16x17mm 18x19mm 20x22mm 24x27mm 30x32mm , double ended spanner 32 to 55 mm , double ended ring spanners 32x36 36x41 41x46 46x50 55x60mm , combination plier 6 , combination plier 8 , chop saw 14 inch , cotton waste white fibre squirrel , cotton waste , markin cloth , m6 grease nipple , m8 grease nipple , m10 grease nipple , grease nipple 180 , grease line nipple 16x13mm , loctite adhesive , pollution mask , cotton hand gloves , double ply polyester webbing slings load capacity 5 tonne , heavy duty endless polyster sling capacity 5 ton x 2mtrs long effective length , polyster sling 5 t cap 3m length , polyster webbing slings 5 ton 5 mtr length , polyster sling 5 ton capacity with eyes on both ends length 8mtr , polyester webbing sling 10 ton 05 meter length , polyster sling with anti abrasive sleeve capacity 10t length 8 mtr , polyster sling length 10 mtr capacity 10 ton , trolley , screw driver 8 inch , screw driver heavy duty 10 inch , screw driver heavy duty 12 inch , screw driver 14 inch , o ring kit , gardening nylon pipe bore dia zero point 5 inch 50 meter lenth , nylone rope 12mm in meter , adjustable spanner length 8 , adjustable spanner 12 , heavy duty pipe wrench 12 inch , polythene masking film roll , umbrella , safety shoes size 8 , hydraulic hose pipe 07200 to 63216 , painting brush 3 , paint brush 4 inch , painting brush 5 , flat, hydro mechanical maintenance tools and consumables, as per technical specification
Agency / Dept :
national hydroelectric power corporation limited nhpc limited
Due Date :
Sep 14, 2026 (2 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17101179
Location : baramulla , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for capping , pvc casing capping t 25mm , pvc casing capping square box 4x4 inch , pvc casing capping elbow 25mm , 20 mm ms drywall cross recessed screws , 35 mm ms drywall cross recessed screws , mcb single pole 230v ac, 50 hz, 6 amps, 10 ka , mcb distribution board in sheet metal enclosure 02 ways , pvc ceiling rose 2 3 terminal , main switch 32 amps double , change over switch 16 amp , 6a one way single module flush type modular switch , 16a one way single module flush type modular switch , switch socket combination 6a 3 5 pin flush type , switch socket combination 16a 3 5 pin flush type , white cover plate with frame 2 module , white cover plate with frame 3 module , 2 module concealed metal flush box , 3 module concealed metal flush box , 18w led tube and fitting 4ft , supply of pressure sensitive self adhesive insulation tape , pvc rawal plug , two tier sleeping bunks , single piece cushion made of 100 mm thick puf foam of density 40 kg , 60 ltr plastic waste bin dark brown colour , 1200x750 x 3.5mm thick silvered glass looking mirror , providing and fixing wall mounted hanger strip 450mm , bricktrowel , drop forged high-grade carbon steel brick hammer , lightweight extruded aluminum alloy straight edge , plaster trowel , 16 inch 400mm diameter mortar pan tasla , high tenacity nylon monofilament line 1.2 mm to 1.5mm diameter , cast iron plumb bobs , heavy duty metal hand rammers for earth compaction , heavy duty pickaxes kudali 14 cp with chisel and point ends , shovel square , single piece hot forged carbon steel powrah , high quality heavy duty flat painting brush , non slip heavy duty industrial rubber gloves , aluminium spirit levels 12 inch , transparent, flexible pvc water leveling tubes in 50 meter , heavy duty combination cutting pliers , non metallic fiberglass measuring tape 15 m , earthing electrode , gi pipe 100 mm dia med grade , back filled compound , msearth pit cover of size 30 cm x 30 cm with handle , aluminium strip size 25mm x 3mm 9.00m long , iron spikes 16 inch long , gi strip of size 32 x 6mm, 3.00m long , gi nipple 20mm dia and 10cm long , gi reducer socket 40x20mm , lightning air terminal a copper tube 150 cm long x 25 mm dia , ms clamp 40x2mm with nut and bolt complete. , gi wire 12 gauge , earth augur , upvc pipe 3m long 6 inch dia , user manual , tester sets , gi pipe medium grade , natural sand , gi pipe 40 mm bore 2m long , 50 mm bore gi pipes sleeve , crystaline condcutive mixture , heating device kerosene based , fire extinguisher 2 kgs, gun pits, construction gun pit area size 4.5m x 4m x 2.70m clear height, ismb size 150 x 75mm 5.2 mtr long including one coat red oxide primer, ismb size 150 x 75mm 2 mtr long including one coat red oxide primer, prefeb welded door ismc 200x75mm 1700mm length, prefeb welded doorismc 200x75mm 1500mm length, steel roofing trough size 2000x613x180mm, steel roofing trough size 2438x613x180mm, steel roofing trough size 1700x613x180mm, hdpe sheet width 5.50mm, hdpe sand bag of size 75x40 cm sand colour, mild steel tmt bars 10 mm dia, mild steel tmt bars 12 mm dia, mild steel tmt bars 08 mm dia, ms binding wire, ply wood 2.00m x 0.30m and 12mm thick, ply wood 2.00m x 0.6m and 12mm thick, ply wood 10 mm thick, prefabricated steel door size 900mm x1800mm, prefabricated steel door size 1500mm x1800mm, steel window size 1200mm x600 mm, prefabricated steel loop hole size 600mm x450mm, synthetic enamel paint olive green, manufactured sand, aggregate 20mm., aggregate 40mm, aggregate 63mm., load bearing concrete pcc soild blocks size 400mm x 200 mm x 200 mm, common burnt clay building bricks size 230x115x75mm, pbs roll size 20m x 0.90m, self taping screw 80mm, integral water proofing compound, hydrophobic poreblocking ingredients, quick setting compound, precast concrete saucer drain of size 300mm x 600mm x 75mm, polyurethane thinner, oil bound distemper, chalk white, cement base paint, cable pvc insulated unsheathed, single core size 1.5 sqmm, cable pvc insulated unsheathed, single core size 2.5 sqmm., cable pvc insulated and pvc sheathed 1100v size 4 sq mm., flexible wire pvc insulated twin core twisted, pvc casing caping pipe 25mmx16mm, 25mm x 16mm pvc casing capping, pvc casing capping t 25mm, pvc casing capping square box 4x4 inch, pvc casing capping elbow 25mm, 20 mm ms drywall cross recessed screws, 35 mm ms drywall cross recessed screws, mcb single pole 230v ac, 50 hz, 6 amps, 10 ka, mcb distribution board in sheet metal enclosure 02 ways, pvc ceiling rose 2 3 terminal, main switch 32 amps double, change over switch 16 amp, 6a one way single module flush type modular switch, 16a one way single module flush type modular switch, switch socket combination 6a 3 5 pin flush type, switch socket combination 16a 3 5 pin flush type, white cover plate with frame 2 module, white cover plate with frame 3 module, 2 module concealed metal flush box, 3 module concealed metal flush box, 18w led tube and fitting 4ft, supply of pressure sensitive self adhesive insulation tape, pvc rawal plug, two tier sleeping bunks as per drawing attached, single piece cushion made of 100 mm thick puf foam of density 40 kg, 60 ltr plastic waste bin dark brown colour, 1200x750 x 3.5mm thick silvered glass looking mirror, providing and fixing wall mounted hanger strip 450mm, bricktrowel, drop-forged high-grade carbon steel brick hammer, lightweight extruded aluminum alloy straight edge, plaster trowel, 16 inch 400mm diameter mortar pan tasla, high tenacity nylon monofilament line 1.2 mm to 1.5mm diameter, cast iron plumb bobs, heavy duty metal hand rammers for earth compaction, heavy duty pickaxes kudali 14 cp with chisel and point ends, shovel square, single piece hot forged carbon steel powrah, high quality, heavy duty flat painting brush, non slip heavy duty industrial rubber gloves, aluminium spirit levels 12 inch, transparent, flexible pvc water leveling tubes in 50 meter, heavy duty combination cutting pliers, non metallic fiberglass measuring tape 15 m, prefabricated gel earthing electrode of pipe in pipe technology, gi pipe 100 mm dia med grade, back filled compound, msearth pit cover of size 30 cm x 30 cm with handle, aluminium strip size 25mm x 3mm 9.00m long, iron spikes 16 inch long, gi strip of size 32 x 6mm, 3.00m long, gi nipple 20mm dia and 10cm long, gi reducer socket 40x20mm, lightning air terminal a copper tube 150 cm long x 25 mm dia, ms clamp 40x2mm with nut and bolt complete., gi wire 12 gauge, earth augur, upvc pipe 3m long 6 inch dia, user manual, tester sets, gi pipe medium grade, natural sand, gi pipe 40 mm bore 2m long, 50 mm bore gi pipes sleeve, crystaline condcutive mixture, heating device kerosene based, fire extinguisher 2 kgs capacity
Agency / Dept :
indian army
Due Date :
Sep 14, 2026 (2 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17096233
Location : jodhpur , rajasthan
Source : GEM Tenders
LIVE TENDER
corrigendum tender for tachometer digital , tong tester clamp meter , megger insulation tester , 3- point d.c. starter , 4- point d.c. starter , wheatstone bridge , single phase variable auto transformer , phase sequence indicator , growler , ac starters 1 each , function generator , electric soldering iron , discrete component trainer , domestic appliances 1 each , oil testing kit , inverter with battery , voltage stabilizer , dc power supply , desktop computer , transformer single phase 1 kva , ceiling fan coil winding machine , ev charger 3 phase , plumb bob , set of rowel punch , conduit pipe cutting and threading machines adjustable , conduit pipe bending machine,suitable , torque wrench , solid state solar based single phase , 3 phase kw meter digital , meter reading instrument mri , wire stripper , bus bar bending machine , bldc motor with controller , servo motor with resolver , pmsm with controller , current transformer , potential transformer , solar panel with battery , mppt based charge controller , digital timer on delay and off delay 230v 1 each , impulse relay , dusk and dawn switch , inkjet laser printer , motor-generator ac to dc , d.c. compound generator , dc compound motor with starter and switch , motor generator dc to ac set consisting of , ac squirrel cage motor with star delta starter , ac phase- wound slip ring motor with starter switch , universal motor with starter switch , synchronous motor with accessories like starter, excitation arrangements , thyristor igbt controlled d.c. motor drive with tacho-generator feedback arrangement , thyristor igbt controlled a.c. motor drive with , electrical machine trainer , pillar electric drill machine motorized , motorised bench grinder , a.c. series type motor , single phase capacitor motor with starter switch , manual motor coil winding machine , primary current injection set , stepper motor with digital controller , shaded pole motor , smart meter single phase , smart meter 3 phase , bus bar punching machine , rawal tool holder and bit , scriber , foot print grip , spirit level , forge with hand blower , tower ladder on type wheels , portable extension ladder , solar street light , solar traffic light , solar dc pump , motion detector , single phasing preventer , solar street light lamp set , d.c. compound motor with control panel , d.c. shunt motor , d. c. series motor , mg set , cctv camera kit , ups with battery , lcd led projector , dmx controller , field regulator , working bench , wiring board , instructors table , instructors chair , metal rack , lockers with drawers 10 drawer , almirah , black board white board , fire extinguisher co2, 2 kg , fire buckets , student table , student stool , gi pipe bending machine 19 mm to 32 mm , battery charger, 0 - 6 - 9 - 12 - 24 - 48 v, 30 amp , battery charger 15 volts, current controlled , hammer ball peen 250gm , ac starters , automatic reverse forward starter , single phase k.w.h meter digital 5a, 250 v a. c , three phase k.w.h meter digital 25a, 415 v a. c , a.c. voltmeter , milli voltmeter centre zero analog , ammeter mc analog , ac ammeter mi , ammeter mc analog, portable box type housed in bakelite case 0-25 a , ammeter m.c. centre zero 5-0-5amp , crimping tool hydraulic 16-300 sq, lab of electrician and wireman, measuring steel tape, combination plier insulated, screwdriver insulated, pliers long nose insulated, heavy duty screwdriver insulated, screw driver, terminal screw driver, pliers side cutting insulated, punch centre, knife double bladed electrician, neon tester, steel rule, hammer, cross peen with handle 250gm, hammer, ball peen with handle, pincer, c- clamp, d.e. metric spanner double ended 6 - 32 mm, spanner adjustable drop forged, spanner set de, blow lamp brass one litre, chisel firmer with wooden handle, allen key alloy steel, grease gun, bradawl, pully puller with 3 legs 150 mm and 300 mm, bearing puller inside and outside, hand vice, pipe vice cast iron with hardened jaw open type- 100 mm, table vice-100 mm, bench vice-150 mm, crimping tool 1 each, hydraulic crimping tool for ug cable, wire cutter and stripper, mallet hard wood, hacksaw frame, try square-150 mm blade, outside calliper inside calliper 1 each, divider, tweezers, drill s.s. twist block, gauge, wire imperial stainlees steel marked in swg and mm, file half round, file flat, file half round 2nd cut, copper bit soldering iron., de soldering gun, contactor and auxiliary contacts, contactor and auxiliary contacts, limit switch, rotary switch, electromagnetic cutout relay 1 each, portable electric drill machine, cordless drilling machine, load bank heater type, pvc pipe bending spring, brake test arrangement with two spring balance rating, out side micrometer, knife switch dpdt fitted with fuse terminals, knife switch tpdt fitted with fuse terminals, rheostat sliding type, rubber mat, safety belt, ohm meter series type and shunt type, portable box type, multi meter, multifunction meter, voltmeter m.c., ammeter m.i. 0-5 amp, digital wattmeter, power factor meter, frequency meter, lux meter, tachometer digital, tong tester clamp meter, megger insulation tester, 3- point d.c. starter, 4- point d.c. starter, wheatstone bridge, single phase variable auto transformer, phase sequence indicator, growler, ac starters 1 each, function generator, electric soldering iron, discrete component trainer, domestic appliances 1 each, oil testing kit, inverter with battery, voltage stabilizer, dc power supply, desktop computer, transformer single phase 1 kva, ceiling fan coil winding machine, ev charger 3 phase, plumb bob, set of rowel punch, conduit pipe cutting and threading machines adjustable, conduit pipe bending machine,suitable, torque wrench, solid state solar based single phase, 3 phase kw meter digital, meter reading instrument mri, wire stripper, bus bar bending machine, bldc motor with controller, servo motor with resolver, pmsm with controller, current transformer, potential transformer, solar panel with battery, mppt based charge controller, digital timer on delay and off delay 230v 1 each, impulse relay, dusk and dawn switch, inkjet laser printer, motor-generator ac to dc, d.c. compound generator, dc compound motor with starter and switch, motor generator dc to ac set consisting of, ac squirrel cage motor with star delta starter, ac phase-wound slip ring motor with starter switch, universal motor with starter switch, synchronous motor with accessories like starter, excitation arrangements, thyristor igbt controlled d.c. motor drive with tacho-generator feedback arrangement, thyristor igbt controlled a.c. motor drive with, electrical machine trainer, pillar electric drill machine motorized, motorised bench grinder, a.c. series type motor, single phase capacitor motor with starter switch, manual motor coil winding machine, primary current injection set, stepper motor with digital controller, shaded pole motor, smart meter single phase, smart meter 3 phase, bus bar punching machine, rawal tool holder and bit, scriber, foot print grip, spirit level, forge with hand blower, tower ladder on type wheels, portable extension ladder, solar street light, solar traffic light, solar dc pump, motion detector, single phasing preventer, solar street light lamp set, d.c. compound motor with control panel, d.c. shunt motor, d. c. series motor, mg set, cctv camera kit, ups with battery, lcd led projector, dmx controller, field regulator, working bench, wiring board, instructors table, instructors chair, metal rack, lockers with drawers 10 drawer, almirah, black board white board, fire extinguisher co2, 2 kg, fire buckets, student table, student stool, gi pipe bending machine 19 mm to 32 mm, battery charger, 0 - 6 - 9 - 12 - 24 - 48 v, 30 amp, battery charger 15 volts, current controlled, hammer ball peen 250gm, ac starters, automatic reverse forward starter, single phase k.w.h meter digital 5a, 250 v a. c, three phase k.w.h meter digital 25a, 415 v a. c, a.c. voltmeter, milli voltmeter centre zero analog, ammeter mc analog, ac ammeter mi, ammeter mc analog, portable box type housed in bakelite case 0-25 a, ammeter m.c. centre zero 5-0-5amp, crimping tool hydraulic 16-300 sq mm
Agency / Dept :
department of technical education DTE
Due Date :
Sep 14, 2026 (2 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17206470
Location : baramulla , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for grade twin core , flexible wire pvc insulated twin core twisted , pvc ceiling rose 2 3 terminal , 18w led tube and fitting 4ft , 09 w led bulb , 9 w interter bulb , switch socket combination 6a 3 5 pin flush type , switch socket combination 16a 3 5 pin flush type , 6a one way single module flush type modular switch , 20 mm ms drywall cross recessed screws bugle head , 35 mm ms drywall cross recessed screws bugle head , supply of pressure sensitive self adhesive plasticized pvc insulation tape , mcb single pole 230v ac 50 hz 6 amps 10 ka , mcb single pole 230v ac 50 hz 16 amps 10 ka , mcb distribution boards in sheet metal enclosure 8 ways , residual current circuit breaker , white cover plate with frame 4 module , white cover plate with frame 3 module , white cover plate with frame 1 module , 4 module concealed metal flush box gi , 3 module concealed metal flush box , 1 module concealed metal flush box , 25mm x 16mm pvc casing capping profile , 25mm pvc casing capping l bend elbow , pvc casing capping t 25mm , pvc casing capping elbow 25mm , pvc casing capping square box 4 inch x 4 inch , supply of 250 mm pvc exhaust fan with louvers , supply of 450 mm plastic wall mounting fan , water dispenser 20 ltr , 15 ltr storage type electric water heater geyser , providing and supplying compressor free compact personal cooling solution of 30 ltr capacity , 5 kva electrical control panel of size 500mm x 400mm x 200mm , 110mm dia upvc swr pipe single socketed pipe , 110mm dia upvc single tee , 4 inch dia 110mm dia upvc bend , 110 x 110mm nahani trap with jali , 50mm dia upvc swr pipe single socketed pipe , 50mm dia upvc socke , upvc 50mm air vent cowl , 110mm upvc end cap , 20mm dia 3-layer pp-r polypropylene random , 20mm elbow suitable for 20mm dia pp r pipe , 20mm socket suitable for 20mm dia pp r pipes , 20mm equal tee suitable for 20mm dia pp r pipe , 20mm union suitable for 20mm pp r pipes , pp r end plug 20mm , pp r pipe clamp suitable for 20mm piping , ppr tank connector 20mm with check nut and washer , ppr reducer socket 20mm 15mm , upvc reducer socket 110mm 50mm , ppr reducer elbow 20 15mm , white lead safeda plumbing jointing compound. , thread cotton ball 100-meter length , pure virgin polytetrafluoroethylene ptfe thread seal tap , chrome plated cp towel ring , cp stop cock 15mm , cp bib cock 20mm , hdpe water storage tank 1000ltr tripple layer , snow white colour wash hand basin of size 550 x 400mm , cp soap dish , cp pillar cock 15mm , 600x450mm silvered glass mirror , isi marked solvent cement for joining unplasticized pvc , factory made upvc door of size 750mmx1800mm minium 60mm , towel rail cp 750mm long , snow white colour european wc , pvc valve less syphonic action type low level flushing cistern 10 ltr capacity , providing manual semi fowler hospital bed size approximately 1800 x 900 x 600 mm , providing 40 litre heavy duty hdpe covered waste bins , approx. 600 x 450 mm, minimum 4 mm thick silvered glass mirror , providing and fixing wall mounted hanger strip 450mm in length , bedside medical cabinet size approx 450 x 450 x 750 mm , steel cupboard wardrobe. providing lockable steel cupboardwardrobe , plastic chair with hand rest model dynasty 570wx593d , providing and supplying heavy duty ms storage rack overall size approx 1000 mm w x 450 mm , bricktrowel , drop forged high grade carbon steel brick hammer , lightweight extruded aluminum alloy straight, bn ug mi room map, construction of an ug mi room map of size 2.5mtr x 3.85mtr, ismb size 150 x 75mm 5.05m long, ismb size 150 x 75mm 7.85 m long, ismc size 75 x 40mm 5.05 m long, ismcs size 75 x 40mm 7.85 m, 12mm dia 150mm long foundation bolt, soakage well cover made of 5mm thick ms sheet, steel roofing trough srt of size srt size 2000x613x180mm, steel roofing trough srt of size srt size 2438x613x180mm, prefabricated steel door size 900mm x1800mm, steel window size 1200mmx300mm, pre fab welded door ismc 200 x 75mm, pre fab welded window loop hole ismc 200 x 75mm, 3.00 m long rectangular hollow section, 2.30m long rectangular hollow section, 150mm long ms angle size 50x50x6mm, self taping screw 75mm, mild steel tmt bars 12 mm dia, mild steel tmt bars 08 mm dia, ms binding wire, 0.60mm thick ppgi sheets size 4270x1000mm, ply wood 2.00m x 0.30m and 12mm thick, deck sheet 3000x975x1.50mm, ply wood 8 ft x 4 ft x 12mm thick, manufactured sand, aggregate 20mm, aggregate 40mm, aggregate 63mm., load bearing concrete pcc soild blocks size 400mm x 200 mm x 200 mm, common burnt clay building bricks, sub class b of size 230x115x75mm, hdpe sand bag of size 75x40 cm, pbs roll self finished tar felt hessian base, quick setting compound, integral water proofing compound, 100 gsm black hdpe woven sheet 5.5width, synthetic enamel pain olive green, polyurethane thinner, cement base paint, anti skid ceramic tiles 600mm x 600mm, ceramic tiles 600x600mm, rubber memberance for water proofing, hydrophobic poreblocking ingredients, wall putty, white cement, cable pvc insulated unsheathed single core 1.5 sqmm, cable pvc insulated unsheathed single core 2.5 sqmm, cable pvc insulated and pvc sheathed 1100v grade twin core, flexible wire pvc insulated twin core twisted, pvc ceiling rose 2 3 terminal, 18w led tube and fitting 4ft, 09 w led bulb, 9 w interter bulb, switch socket combination 6a 3 5 pin flush type, switch socket combination 16a 3 5 pin flush type, 6a one way single module flush type modular switch, 20 mm ms drywall cross recessed screws bugle head, 35 mm ms drywall cross recessed screws bugle head, supply of pressure sensitive self adhesive plasticized pvc insulation tape, mcb single pole 230v ac 50 hz 6 amps 10 ka, mcb single pole 230v ac 50 hz 16 amps 10 ka, mcb distribution boards in sheet metal enclosure 8 ways, residual current circuit breaker, white cover plate with frame 4 module, white cover plate with frame 3 module, white cover plate with frame 1 module, 4 module concealed metal flush box gi, 3 module concealed metal flush box, 1 module concealed metal flush box, 25mm x 16mm pvc casing capping profile, 25mm pvc casing capping l bend elbow, pvc casing capping t 25mm, pvc casing capping elbow 25mm, pvc casing capping square box 4 inch x 4 inch, supply of 250 mm pvc exhaust fan with louvers, supply of 450 mm plastic wall mounting fan, water dispenser 20 ltr, 15 ltr storage type electric water heater geyser, providing and supplying compressor free compact personal cooling solution of 30 ltr capacity, 5 kva electrical control panel of size 500mm x 400mm x 200mm, 110mm dia upvc swr pipe single socketed pipe, 110mm dia upvc single tee, 4 inch dia 110mm dia upvc bend, 110 x 110mm nahani trap with jali, 50mm dia upvc swr pipe single socketed pipe, 50mm dia upvc socke, upvc 50mm air vent cowl, 110mm upvc end cap, 20mm dia 3-layer pp-r polypropylene random, 20mm elbow suitable for 20mm dia pp r pipe, 20mm socket suitable for 20mm dia pp r pipes, 20mm equal tee suitable for 20mm dia pp r pipe, 20mm union suitable for 20mm pp r pipes, pp r end plug 20mm, pp r pipe clamp suitable for 20mm piping, ppr tank connector 20mm with check nut and washer, ppr reducer socket 20mm 15mm, upvc reducer socket 110mm 50mm, ppr reducer elbow 20 15mm, white lead safeda plumbing jointing compound., thread cotton ball 100-meter length, pure virgin polytetrafluoroethylene ptfe thread seal tap, chrome plated cp towel ring, cp stop cock 15mm, cp bib cock 20mm, hdpe water storage tank 1000ltr tripple layer, snow white colour wash hand basin of size 550 x 400mm, cp soap dish, cp pillar cock 15mm, 600x450mm silvered glass mirror, isi marked solvent cement for joining unplasticized pvc, factory made upvc door of size 750mmx1800mm minium 60mm, towel rail cp 750mm long, snow white colour european wc, pvc valve less syphonic action type low level flushing cistern 10 ltr capacity, providing manual semi fowler hospital bed size approximately 1800 x 900 x 600 mm, providing 40 litre heavy duty hdpe covered waste bins, approx. 600 x 450 mm, minimum 4 mm thick silvered glass mirror, providing and fixing wall mounted hanger strip 450mm in length, bedside medical cabinet size approx 450 x 450 x 750 mm, steel cupboard wardrobe. providing lockable steel cupboardwardrobe, plastic chair with hand rest model dynasty 570wx593d, providing and supplying heavy duty ms storage rack overall size approx 1000 mm w x 450 mm, bricktrowel, drop forged high grade carbon steel brick hammer, lightweight extruded aluminum alloy straight edge, plaster trowe, 16 inch 400mm diameter mortar pan tasla, high-tenacity nylon monofilament line, cast iron plumb bobs, heavy-duty metal hand rammers for earth compaction, heavy duty pickaxes, shovel square, single piece hot-forged carbon steel powrah, high quality heavy duty flat painting brush, non-slip heavy duty industrial rubber gloves, aluminium spirit levels 12-inch 300 mm, transparent flexible pvc water leveling tubes in 50 meter, heavy duty combination cutting pliers, non metallic fiberglass measuring tape 15 m, heavy duty crow bar 5 feet 1500 mm length, earthing electrode, gi pipe 100 mm dia med grade, back filled compound, ms conforming earth pit cover of size 30 cm x 30 cm with handle, aluminium strip, iron spikes 16 inch long, gi strip of size 32 x 6mm, 3.00m long, gi nipple 20mm dia and 10cm, gi reducer socket 40x20mm, lightning air terminal a copper tube 150 cm long x 25 mm dia, ms clamp 40x2mm with nut and bolt, gi wire 12 gauge, earth augur, upvc pipe 3m long 6 inch dia, user manual, tester set, gi pipe medium, natural sand, gi pipe 40 mm bore 2m long, 50 mm bore gi pipes sleeve, crystaline condcutive mixture, installation of 5 kva inverter, heating device, fire extinguisher 2 kgs capacity
Agency / Dept :
indian army
Due Date :
Sep 21, 2026 (9 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17154820
Location : kapurthala , punjab
LIVE TENDER
tender for side wall complete for lhb bangladesh non-ac chair car, side wall complete for lhb bangladesh non-ac chair car. note:-(1)supply of loose items should be as per dy cple -i letter no. rcf/hsq/plg/ppsh/13631 dated 14.08.202 6. (2) make/manufacturer of raw material shall be m/s jsl or m/s sail. (3) in drawings mig welding (131) is to be read as tig welding (141) as per design letter no. md46231 dated 16.03.2024., as per drawing: bje14001 alt 'nil', packing instruction: 1. the supplier shall pack t he side wall set (minimum one c/set ) in a suitably designed returnable fixture(as per d rawing no icf/j&t/misc-2201 alt. `e?) in such a way that side wall shell not get scratche d, damaged ,twisted during transportation ,storage and lifting and to avoid scratche s on outer surface. it should be wrapped with environment friendly material and it sh ould have standard clamping/fastening mechanism so that it can be opened easily. it s hould have firm's identification mark . 2. first returnable fixture along with set of sid e wall shall be retained by rcf & this fixture shall be exchanged in the second lot sup ply and so on. at the end of the contract , the firm shall collect the remaining return able packing fixture from rcf. 3. the packing fixture/frame to be fabricated having suf ficient strength to bear approx 4 tonne load in static & moving condition of one coac h set of side wall. 4. the fixture/frame /pallet should be designed so that the packed si de wall remain in vertical/slanting position to minimize surface area and to avoid road bumps. - warranty period: 30 months after the date of delivery
Agency / Dept :
rail coach factory RCF
Due Date :
Oct 05, 2026 (23 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17186940
Location : bina , madhya pradesh
Source : GEM Tenders
LIVE TENDER
tender for printed tags 75 50 1mm aluminum for psv , twist sealing wire ss 1mm f sealing of psv , graphite tape 5mm , grinding wheel medium 6 1 25 0 75in , grinding wheel coarse 6 1 25 0 75in , tissue paper roll double ply wd 10 12cm , end mills cutter carbide 3mm , end mills cutter carbide 4mm , end mills cutter carbide 6mm , end mills cutter carbide 8mm , end mills cutter carbide 9mm , end mills cutter carbide 11mm , end mills cutter carbide 12mm , end mills cutter carbide 14mm , end mills cutter carbide 16mm , end mills cutter carbide 20mm , end mills cutter carbide 25mm , drill bit hss taper shank 40mm , drill bit hss taper shank 45mm , carbide drill bit parallel shank 3mm , carbide drill bit parallel shank 3 3mm , carbide drill bit parallel shank 3 5mm , carbide drill bit parallel shank 4mm , carbide drill bit parallel shank 4 2mm , carbide drill bit parallel shank 4 5mm , carbide drill bit parallel shank 5mm , carbide drill bit parallel shank 5 5mm , carbide drill bit parallel shank 6mm , carbide drill bit parallel shank 6 5mm , carbide drill bit parallel shank 7mm , carbide drill bit parallel shank 7 5mm , carbide drill bit parallel shank 8mm , carbide drill bit parallel shank 8 5mm , carbide drill bit parallel shank 9mm , carbide drill bit parallel shank 9 5mm , carbide drill bit parallel shank 10mm , carbide drill bit parallel shank 10 5mm , carbide drill bit parallel shank11mm , carbide drill bit parallel shank 11 5mm , carbide drill bit parallel shank 12mm , carbide drill bit parallel shank 14mm , carbide drill bit parallel shank 16mm , carbide drill bit parallel shank 18mm , carbide drill bit parallel shank 20mm , end mills cutter carbide 7mm , drill bit hss parallel shank 10mm , drill bit hss parallel shank 10 5mm , drill bit hss parallel shank 11mm , drill bit hss parallel shank 11 5mm , drill bit hss parallel shank 12mm , drill bit hss parallel shank 12 5mm , drill bit hss parallel shank 18mm , drill bit hss parallel shank 20mm , carbide tipped tools 115 1212 tipg10 , carbide tipped tools 115 2516 tip g12 , drill bit hss parallel shank 14mm , drill bit hss parallel shank 16mm , drill bit hss taper shank 18mm , drill bit hss taper shank18 5mm , drill bit hss taper shank 19mm , end mills cutter carbide 5mm , end mills cutter carbide 10mm , tool bit rectangular hss 1 2 1 6in , tool bit rectangular hss 5 8 3 4 6in , tool bit rectangular hss 3 4 1 6in , parting tool bit hss 3 32 5 8 5in , parting tool bit hss 1 8 3 4 6in , parting tool bit hss 3 16 1 6in , centre drills type b pilot dia 4 0mm , centre drills type b pilot dia 8 0mm , centre drills type b pilot dia 2 0mm , centre drills type b pilot dia 5 0mm, procurement of consumables tool at br, as per crfq 1000464014 item no 10, as per crfq 1000464014 item no 20, as per crfq 1000464014 item no 30, as per crfq 1000464014 item no 40, as per crfq 1000464014 item no 50, as per crfq 1000464014 item no 60, as per crfq 1000464014 item no 70, as per crfq 1000464014 item no 80, as per crfq 1000464014 item no 90, as per crfq 1000464014 item no 100, as per crfq 1000464014 item no 110, as per crfq 1000464014 item no 120, as per crfq 1000464014 item no 130, as per crfq 1000464014 item no 140, as per crfq 1000464014 item no 150, as per crfq 1000464014 item no 160, as per crfq 1000464014 item no 170, as per crfq 1000464014 item no 180, as per crfq 1000464014 item no 190, as per crfq 1000464014 item no 200, as per crfq 1000464014 item no 210, as per crfq 1000464014 item no 220, as per crfq 1000464014 item no 230, as per crfq 1000464014 item no 240, as per crfq 1000464014 item no 250, as per crfq 1000464014 item no 260, as per crfq 1000464014 item no 270, as per crfq 1000464014 item no 280, as per crfq 1000464014 item no 290, as per crfq 1000464014 item no 300, as per crfq 1000464014 item no 310, as per crfq 1000464014 item no 320, as per crfq 1000464014 item no 330, as per crfq 1000464014 item no 340, as per crfq 1000464014 item no 350, as per crfq 1000464014 item no 360, as per crfq 1000464014 item no 370, as per crfq 1000464014 item no 380, as per crfq 1000464014 item no 390, as per crfq 1000464014 item no 400, as per crfq 1000464014 item no 410, as per crfq 1000464014 item no 420, as per crfq 1000464014 item no 430, as per crfq 1000464014 item no 440, as per crfq 1000464014 item no 450, as per crfq 1000464014 item no 460, as per crfq 1000464014 item no 470, as per crfq 1000464014 item no 480, as per crfq 1000464014 item no 490, as per crfq 1000464014 item no 500, as per crfq 1000464014 item no 510, as per crfq 1000464014 item no 520, as per crfq 1000464014 item no 530, as per crfq 1000464014 item no 540, as per crfq 1000464014 item no 550, as per crfq 1000464014 item no 560, as per crfq 1000464014 item no 570, as per crfq 1000464014 item no 580, as per crfq 1000464014 item no 590, as per crfq 1000464014 item no 600, as per crfq 1000464014 item no 610, as per crfq 1000464014 item no 620, as per crfq 1000464014 item no 630, as per crfq 1000464014 item no 640, as per crfq 1000464014 item no 650, as per crfq 1000464014 item no 660, as per crfq 1000464014 item no 670, as per crfq 1000464014 item no 680, as per crfq 1000464014 item no 690, as per crfq 1000464014 item no 700, as per crfq 1000464014 item no 710, as per crfq 1000464014 item no 720
Agency / Dept :
bharat petroleum corporation limited BPCL
Due Date :
Sep 28, 2026 (16 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16837916
Location : hyderabad , telangana
Source : GEM Tenders
tender for tce lab grade 2.5litre , needle files set 160mm o cut , 803 screw driver 55mm , araldite, resin and hardener pac , loctite 222tm 50ml , loctite 242 ( 50ml) , loctite 270 -50ml , prussian blue, 60ml , 6'' safety wire twisting plier small , banian cloth , paper tape 1 by 2 inch , paper tape 1 inch , paper tape 2 inch , surgical gloves large , dispossable face masks , snoop leak detector 236ml
Agency / Dept :
defence research and development organisation DRDO
Due Date :
Aug 28, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Twisting Plier. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Twisting Plier sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Twisting Plier Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Twisting Plier, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Twisting Plier Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Twisting Plier Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Twisting Plier.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Twisting Plier depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Twisting Plier Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Twisting Plier bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Twisting Plier. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Twisting Plier, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Twisting Plier, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Twisting Plier?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Twisting Plier tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Twisting Plier?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Twisting Plier, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Twisting Plier is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All