sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

16Latest Turning and milling inserts Tenders List

Latest Turning and milling inserts Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Turning and milling inserts tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Turning and milling inserts tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Turning and milling inserts Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Turning and milling inserts tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Turning and milling inserts Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Turning and milling inserts Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Turning and milling inserts Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Turning and milling inserts tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Turning and milling inserts Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Turning and milling inserts sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Turning and milling inserts tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Turning and milling inserts tenders.

Is EMD mandatory for all Turning and milling inserts tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Turning and milling inserts work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Turning and milling inserts tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Turning and milling inserts Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17423130
Location : ludhiana , punjab
Source : GEM Tenders
LIVE TENDER
tender for turning and milling inserts (bhel) (q3)
Agency / Dept :
micro small and medium enterprises MSME
Due Date :
Oct 03, 2026 (1 day left)
Tender Value :
70.8K
View Documents
T18 Ref No : 17460288
Location : daskroi , gujarat
Source : GEM Tenders
LIVE TENDER
tender for boq for mh and tr trade - slotter , assorted tools and bit holders for lathe shaper slotter and planner , table chuck 75 mm jaw swivel base , radius turning attachment , compound angle vice standard sine , universal table angle plate , shaper tool holder turret type to suit the machine , base chuck for slotter to suit the machine , shaper indexing center to suit the machine , knurling tools set of 3 straight and diamond , carbide tipped tools of different sizes and shapes throw away tips , inductor 400 turns 200 turns 600 turns 1200 turns i core e core u core , i mounting plate , milling cutter , milling cutter shell end mill dia 75 mm 50 27 mm , milling cutter t slot cutter with parallel shank dia 17.5 8 mm , milling cutter concave dia 63 x 6 radius x 27 mm bore diameter , milling cutter convex dia 63 x 6 radius x 27 mm bore diameter , telescopic gauge 8 mm to 150 mm in set , centre gauge com 60 degree 55 degree and 29 degree , gauge screw pitch metric -0.25 to 6 mm in set , planer gauge standard size , caliper outside spring joint 150 mm , caliper odd-leg firm joint 150 mm , reamer machine straight flute 6 to 25 mm , plain ring and plug gauge , hand chaser m 12 and m 16 external , hand chaser m 12 and m 16 internal , divider spring joint 150 mm , tool bits , boring tool holder 6 mm sq tool bit , parting tool holder with h.s.s. blade standard , tool bit assorted sizes on holder , gauge - radius set 1 mm to 25 mm by 0.5 mm , angle gauge for tool grinding standard , revolving cente , combination set 300 mm complete set , knurling tool revolving head , drill angle gauge 45 degree60 degree 90 degree , wheel dresser diamond inserted 0.75 or 1 carat , sine bar with centers 200 mm , angle plate , v block , morse taper sleeves no , twist drill , drill twist set taper , reamer adjustable 10 to 20 mm , tool makers button standard , spare grinding wheel type , tool cemented carbide , thread ring gauge m20 and m21 , machine chaser , gauge drill grinding standard , magnetic chuck 150 mm dia circulartype, slotter adjustable stroke mm 10 to 150 longitudinal movement (mm) 200, assorted tools and bit holders for lathe shaper slotter and planner, table chuck 75 mm jaw swivel base, radius turning attachment, compound angle vice (standard sine), universal table angle plate 150 x 150 x 150 mm, shaper tool holder turret type to suit the machine, base chuck for slotter to suit the machine, shaper indexing center to suit the machine, knurling tools (set of 3) straight and diamond, carbide tipped tools of different sizes and shapes (throw away tips), inductor 400 turns 200 turns 600 turns 1200 turns) i-core e-core u- core, i. mounting plate, milling cutter shell end mill dia 50 x 36 x 27 mm preferably inserted tip type, milling cutter shell end mill dia 75 mm 50 27 mm, milling cutter t slot cutter with parallel shank dia 17.5 8 mm, milling cutter concave dia 63 x 6 radius x 27 mm bore diameter, milling cutter convex dia 63 x 6 radius x 27 mm bore diameter, telescopic gauge 8 mm to 150 mm in set, centre gauge com 60 degree 55 degree and 29 degree, gauge screw pitch metric -0.25 to 6 mm in set, planer gauge standard size, caliper outside spring joint 150 mm, caliper odd-leg firm joint 150 mm, reamer machine straight flute 6 to 25 mm, plain ring and plug gauge, hand chaser m 12 and m 16 external, hand chaser m 12 and m 16 internal, divider spring joint 150 mm, tool bits assorted shaped, boring tool holder 6 mm sq tool bit, parting tool holder with h.s.s. blade standard, tool bit assorted sizes on holder, gauge - radius set 1 mm to 25 mm by 0.5 mm, angle gauge for tool grinding standard, revolving center to suit lathe tailstock standard, combination set 300 mm complete set, knurling tool revolving head rough med fine diamond and straight, drill angle gauge 45 degree60 degree 90 degree, wheel dresser diamond inserted 0.75 or 1 carat, sine bar with centers 200 mm, angle plate, v block 150by100by100 mm with clamp hardened and ground, morse taper sleeves no, twist drill straight shank 3 to 12 mm by 1 mm, drill twist set taper shank 14 mm to 20 mm by 1 mm, reamer adjustable 10 to 20 mm, tool makers button standard, spare grinding wheel type for carbide tool, tool cemented carbide, thread ring gauge m20 and m21, chaser, gauge drill grinding standard, magnetic chuck 150 mm dia circulartype
Agency / Dept :
department of employment and training DET
Due Date :
Oct 08, 2026 (6 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17544198
Location : gandevi , gujarat
Source : GEM Tenders
LIVE TENDER
corrigendum tender for electronic and misc items boq 1 alluminum roundbar dia 60mm , copper tube dia 1 by 2 inch , m s round bar dia 25mm , m s round bar dia 32mm , m s round bar dia 45mm , 2 point 5 sq mm copper wire flexible length 91 point 1 mtr is 694 red yellow black blue , 1 point 5 sq mm copper wire flexible length 91 point 1 mtr is 694 ,red,yellow,blue,black,green , acsr conductor , soldering wire 80 colon 20 1 no equal to 250grm , steel wire brush 4 raw , aluminium lugs ring type 1 point 5 sq mm , aluminium lugs u type 2 point 5 sq mm , copper lugs 35sqmm , copper lugs pin type 2point5 sq mm , copper lugs pin type 1 point 5 sqmm , copper lugs pin type 1 sq mm , copper lugs ring type 1 point 5 sq mm , copper lugs ring type 1sq mm , copper lugs ring type 2 point 5 sq mm , copper lugs u type fork type 1 point 5 sq mm , copper lugs u type fork type 1 sq mm , copper lugs y type 1 point 5 sq mm , copper lugs y type 2 point 5 sq mm , dowells copper lugs , flexible cable 2c x 1 sq mm copper round type , pvc bobin cross area 1inch x1inch , pvc gang box 3 way , pvc gang box 4 way , pvc relay module with base dc2411p , bleaching cream activator oxy life 300 gm , methyl alcohol ch3oh , industrial single needle lock stitch machine belt , fiber buttons four hole size 20mm black and white , capacitor 102pf , capacitor 47mfd 16v , carbon resistor 10 k,1 by 4 w , carbon resistor 100 ohm 1by 4 w , carbon resistor 100e, 1 by 4 watt , carbon resistor 150k, 1 by 4w , carbon resistor 180e 1 by 4 w , carbon resistor 2 k, 1 by 2 watt , carbon resistor 2k2 1 by 4 w , carbon resistor 330e 1 by 4 w , carbon resistor 3k3e, 1 by 4 w , carbon resistor 430ohm, 1 by 2 watt , carbon resistor 470e k 1 by 4 w , carbon resistor 51k 1 by 4 w , carbon resistor 82 ohm,1 by 4w , carbon resistor 820e 1 by 4 w , carbon resistor3k9 1 by 4 w , ceramic capacitor 100pfd , crocodile pin pair 16amp red and black , di soldering wick 2 point 5mm x 1 mtr long copper , electrolyte capacitor 10 micro farad 16v , electrolyte capacitor 100 micro farad 10v , electrolyte capacitor 1000 micro farad 16v , electrolyte capacitor 10microfarade,25 v , electrolyte capacitor 2 point 2 microfarade,63 v , electrolyte capacitor 2 point 5 mfd, 230 volt is 1709 ac , electrolyte capacitor 22 mfd 25 v , electrolyte capacitor 4 point 7 microfarade,25 v , electrolyte capacitor 47mfd,25 v , female to female jumper wires , flame sensor , gang capacitor 135pf to 500pf , hrc fuse , ic socket 8pin , ldr , lithium ion-li- ioncoin cell battery , male to female jumper wires , male to male jumper wires , metal film resistor 100ohm 1w , mq 3 gas sensor , paper capacitor , plastic film capacitor 0 point 0100 mfd , resistor 470 ohm , 1 by 2 watt , resistor 10kohm , resistor 47 ohm , 1 by 2 watt , resistor 560e , 1 by 4 watt , resistors 10,20,30,40,50,60 ohm , 1watt , zener diode 15v , zener diode 27v , zener diode 5 point 1v , zener diode 8 point 2v , zener diode 9 point 1v , touch sensor , mscc filler rod dia 1point6 mm , ss electrode 3point15 mm , modular pvc board 10 inch x 12 inch , wooden board 10 inch x 12 inch , refrigerant r600 450 grm tin , solid carbide end mill cutter dia 06x100 mm long , threading insert 16ermag60cv15 for mild steel , parting insert tdc-3 mm for mild steel , external turning insert vgbt 120408 , insert for u drill spmg060208 , machine history sheet f trg 26, alluminum roundbar dia 60mm, copper tube dia 1 by 2 inch, m s round bar dia 25mm, m s round bar dia 32mm, m s round bar dia 45mm, 2 point 5 sq mm copper wire flexible length 91 point 1 mtr is 694 red yellow black blue, 1 point 5 sq mm copper wire flexible length 91 point 1 mtr is 694 ,red,yellow,blue,black,green, acsr conductor, soldering wire 80 colon 20 1 no equal to 250grm, steel wire brush 4 raw, aluminium lugs ring type 1 point 5 sq mm, aluminium lugs u type 2 point 5 sq mm, copper lugs 35sqmm, copper lugs pin type 2point5 sq mm, copper lugs pin type 1 point 5 sqmm, copper lugs pin type 1 sq mm, copper lugs ring type 1 point 5 sq mm, copper lugs ring type 1sq mm, copper lugs ring type 2 point 5 sq mm, copper lugs u type fork type 1 point 5 sq mm, copper lugs u type fork type 1 sq mm, copper lugs y type 1 point 5 sq mm, copper lugs y type 2 point 5 sq mm, dowells copper lugs, flexible cable 2c x 1 sq mm copper round type, pvc bobin cross area 1inch x1inch, pvc gang box 3 way, pvc gang box 4 way, pvc relay module with base dc2411p, bleaching cream activator oxy life 300 gm, methyl alcohol ch3oh, industrial single needle lock stitch machine belt, fiber buttons four hole size 20mm black and white, capacitor 102pf, capacitor 47mfd 16v, carbon resistor 10 k,1 by 4 w, carbon resistor 100 ohm 1by 4 w, carbon resistor 100e, 1 by 4 watt, carbon resistor 150k, 1 by 4w, carbon resistor 180e 1 by 4 w, carbon resistor 2 k, 1 by 2 watt, carbon resistor 2k2 1 by 4 w, carbon resistor 330e 1 by 4 w, carbon resistor 3k3e, 1 by 4 w, carbon resistor 430ohm, 1 by 2 watt, carbon resistor 470e k 1 by 4 w, carbon resistor 51k 1 by 4 w, carbon resistor 82 ohm,1 by 4w, carbon resistor 820e 1 by 4 w, carbon resistor3k9 1 by 4 w, ceramic capacitor 100pfd, crocodile pin pair 16amp red and black, di soldering wick 2 point 5mm x 1 mtr long copper, electrolyte capacitor 10 micro farad 16v, electrolyte capacitor 100 micro farad 10v, electrolyte capacitor 1000 micro farad 16v, electrolyte capacitor 10microfarade,25 v, electrolyte capacitor 2 point 2 microfarade,63 v, electrolyte capacitor 2 point 5 mfd, 230 volt is 1709 ac, electrolyte capacitor 22 mfd 25 v, electrolyte capacitor 4 point 7 microfarade,25 v, electrolyte capacitor 47mfd,25 v, female to female jumper wires, flame sensor, gang capacitor 135pf to 500pf, hrc fuse, ic socket 8pin, ldr, lithium ion-li-ioncoin cell battery, male to female jumper wires, male to male jumper wires, metal film resistor 100ohm 1w, mq 3 gas sensor, paper capacitor, plastic film capacitor 0 point 0100 mfd, resistor 470 ohm , 1 by 2 watt, resistor 10kohm, resistor 47 ohm , 1 by 2 watt, resistor 560e , 1 by 4 watt, resistors 10,20,30,40,50,60 ohm , 1watt, zener diode 15v, zener diode 27v, zener diode 5 point 1v, zener diode 8 point 2v, zener diode 9 point 1v, touch sensor, mscc filler rod dia 1point6 mm, ss electrode 3point15 mm, modular pvc board 10 inch x 12 inch, wooden board 10 inch x 12 inch, refrigerant r600 450 grm tin, solid carbide end mill cutter dia 06x100 mm long, threading insert 16ermag60cv15 for mild steel, parting insert tdc-3 mm for mild steel, external turning insert vgbt 120408, insert for u drill spmg060208, machine history sheet f trg 26 for industrial training institute, general maintenance register f trg 28 for industrial training institute
Agency / Dept :
department of employment and training DET
Due Date :
Oct 03, 2026 (1 day left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16762618
Location : ludhiana , punjab
Source : GEM Tenders
corrigendum tender for turning and milling inserts (bhel) (q3)
Agency / Dept :
micro small and medium enterprises MSME
Due Date :
Aug 17, 2026
Tender Value :
53.1K
View Documents
T18 Ref No : 16589147
Location : ludhiana , punjab
Source : GEM Tenders
tender for turning and milling inserts (bhel) (q3)
Agency / Dept :
micro small and medium enterprises MSME
Due Date :
Aug 14, 2026
Tender Value :
53.1K
View Documents
T18 Ref No : 16638164
Location : kolar , karnataka
Source : GEM Tenders
tender for 0903110326 milling insert tpkn 1103 ppn , 2206020421 turning insert, ccmt 060204 , 0811020410 turning insert tcmt 110204en , 0816030823 turning insert tcmt 16t308 , 7436000155 ceramic insert, tpgn 160304, milling and turning insert, 0903110326 milling insert tpkn 1103 ppn, 2206020421 turning insert, ccmt 060204, 0811020410 turning insert tcmt 110204en, 0816030823 turning insert tcmt 16t308, 7436000155 ceramic insert, tpgn 160304
Agency / Dept :
bharat earth movers limited BEML
Due Date :
Aug 17, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16859221
Location : mysore , karnataka
auction or scrap of lot no - lot name - scrap of condemned bg405 cabins product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of condemned /damaged/used/ unserviceable bg405 cabins available on as is where is condition. (approx weight of 01cabin = 680kgs) \ (note:buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - m s turning boring scrap product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps m.s.turning & boring scrap contained in two different storage locations available on as is where is condition. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - scrap of c i boring m s turning and boring mixed product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of c.i boring/m.s. turning & boring(mixed) available on as is where is condition. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - scrap of c i boring m s turning and boring mixed product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of c.i boring/m.s. turning & boring(mixed with mud) available on as is where is condition. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - m s melting scrap product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps m.s.melting scrap of various thickness,consisti ng of off-cut plates recieved from production shops on as is where is condition note 1)an amount of rs.3,00,000/- (rs.three lakhs only) is required to be paid by any participating bidder/buyer as pre-bid emd amount to m/s mstc,bangalore . 2)buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap. | lot no - lot name - scrap of plastic and fibre items product type - miscellaneous category - plastic - 0.0 pcb group - plastic scrap scrap of plastic/fibre items consisting of various items like damaged crates,platic bins,roof top ventilators,plastic chairs,water tanks, empty oil cans and various other kinds of plastic or fibre items available on as is where is basis. (note :buyers should have authorisation from pollution control board as recyclers or re- processors for plastic wastes/scrap.) | lot no - lot name - t1 steel scrap alloy steel product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps t1-steel scrap (alloy steel) of various thickness,consisti ng of off-cut plates recieved from production shops on as is where is basis . (note:buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - scrap of rubber items product type - miscellaneous category - rubber - 0.0 pcb group - rubber scrap scrap of rubber items consisting of condemned/un- serviceable/reject ed rubber/plastic/ho ses/pvc/nylon tubes along with other miscellanious items consisting of lengthy individual pressure hoses, hose assys with or without end fittings ,o-rings, bushes,pvc nylon tubes ,belts, flaps ,rubber mounts, gromets,rubber pads ,etc., available on as is where is condition. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of rubber wastes /scrap.) | lot no - lot name - scrap of m s flame cutting slag product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of m.s. flame cutting slag on as is where is basis. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - ms iron product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps ms iron baleputty scrap contained in meshed pallets on as is where is basis (note: 1)the meshed pallets used to stock the baleputty are not included in the lot. 2)buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap. | lot no - lot name - scrap of rubber product type - miscellaneous category - rubber - 0.0 pcb group - rubber scrap scrap of rubber consisting of condemned/obsol ete/used/rejecte d/damaged/worno ut equipment /project tyres of various equipment models without wheelrims along with transportation vehicle tyres available with different sizes/types/radial /normal/nylon re- inforced/steel braided/solid etc.,available in differrent ply ratings on as is where is condition. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of rubber wastes/scrap.) | lot no - lot name - ms scrap product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps ms scrap of condemned /damaged/used/ unserviceable cast iron /galvanised iron or ms pipes of various sizes, diameters and lengths associated with or without end fittings, mounting bolts,couplers,con necting metal/plastic washers etc., on as is where is condition (note 1) the gas cutting permission in advance,will be given by beml to the successful buyer to facilitate loading. 2)buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - scrap of stainless steel canteen vessels product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of condemned/unse rviceable stainless steel canteen vessels consisting of various items like steel tables with ms fittings,steel tumblers,steel plates ,steel glasses,coffee cups/serving pots /boxes/tea pots/ water jugs/serving handles etc available on as is where is basis. the lot may contain some of the aluminium vessels/items also to be considered as integral part of the scrap lot while lifting. (note: 1)separating ms fittings from the steel tables are not allowed and to be lifted fully as integral part of the lot. 2)buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous / ms/ ss / iron & steel | lot no - lot name - scrap of damaged engines product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of condemned ,rejected,used,d amaged engines of various equipment models available with or without their associated accessories on as is where is condition. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - scrap of condemned rejected bg405 transmissions product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of condemned & rejected bg405 transmissions available on as is where is condition.(approx weight of 01transmission= 420kgs) (note:buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - scrap of condemned damaged bg405 hood assy product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of condemned ,rejected,used,d amaged bg405 hood assy available on as is where is condition. (approx weight of 01hood assy = 290kgs) note: 1)the gas cutting permission in advance,will be given by beml to the successful buyer to facilitate loading.however, gas cutting to be done as minimum as possible just sufficient to load the materials on the trucks/lorry. 2)buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - m s scrap product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps m.s.scrap of miscellaneous items consisting of waste formed plates, channels, cut plates , angles, tubes,rails, scrapped welded structures, gussets,cut and deformed ms plates,bars,round s ,off cut plates along with all other ms items of miscellanious shapes and sizes etc., available on as is where is condition. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - scrap of condemned welding coil spools product type - miscellaneous category - plastic - 0.0 pcb group - plastic scrap scrap of condemned,dam ged,rejected,used welding coil spools (with or without damages) available on as is where is condition. (note :buyers should have authorisation from pollution control board as recyclers or re- processors for plastic wastes/scrap.) | lot no - lot name - scarp of used and oil soaked leather hand gloves product type - petroleum products category - used/ waste oil - 0.0 pcb group - used spent/burnt oil/used lube oil/used engine oil scarp of used and rejected oil soaked leather hand gloves and aprons of various sizes available on as is where is basis .(note:buyers should have authorisation from pollution control board as recyclers or re- processors for handling oil soaked wastes/scrap.) | lot no - lot name - scrap of used battery operated platform truck- 3 wheeler product type - transport vehicles category - others - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of used,condemned ,damaged,reject ed and unserviceable battery operated platform truck-3 wheeler available with or without associated accessories for sale on as is where is condition. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - scrap of condmend cp compressor product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of condmened/dam aged/used/unser viceable/rejected cp compressor associated with/without heavy castiron casing/sheetmetal enclosures/trolley s and other associated spare parts like flywheel,connectin g ducts,covers,tube s,structures etc available on as is where is condition.(beml asset no: 4103432) (note:buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - scrap of electrical items product type - electrical items category - others - 0.0 pcb group - e- waste-rule 2022 scrap of electrical items consisting of condemned ,used,rejected ,damaged wire harnesses along with other items like switches,cieling fans, small electrical coils,small armature fittings along with alluminium casings, electrical boards,small exhaust fan assemblies, rear tail /top lamp assemblies,tube light fitings/frames,allu minium dome lights, solar panels,coils,roto ry switches, damaged telephone handles,burnt bulbs,pcb boards,ac/dc circuit boards with capacitors,heavy electrical conductors,bus bars,condmened crt tubes with associated parts,plugs,socke ts,fuses,control knobs and | lot no - lot name - scrap of condemned protective covers guards product type - miscellaneous category - plastic - 0.0 pcb group - plastic scrap scrap of condemned,used ,damaged & rejected protective covers/guards(us ed to cover wheel rims or tyres) usually made up of fibre re- inforced plastic available on as is where is condition. (note :buyers should have authorisation from pollution control board as recyclers or re- processors for plastic wastes/scrap.) | lot no - lot name - scrap of cutting tools hand tools product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of condemned,used ,damaged & rejected,worn- out,unserviceable cutting tools/hand tools consisting of items like drill bits,tapping bits, milling cutters etc. the lot is also inclusive of other tools like hand held pneumatic drilling machines,electric al grinding machines,torque wrenches,extensi on bars,measuring tapes,and all other hand tools of various sizses and shapes etc., available on as is where is condition. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - electronic waste product type - electronics items category - compters/peripherals - 0.0 pcb group - e- waste-rule 2022 electronic waste: condemned,dam aged,rejected, unusable it equipments such as pcs, dmp printers(dot matrix printers),line printers,deskjet printers,motherbo ards,smps,mouse ,keyboards,crt monitors,old broken printers,scrap cd writers,scrapped laser jet or dot matrix printers & tft or crt monitors along with or without power cables ,scrapped photocopying machines ,scrap cds with plastic/pvc containers.,used & discraded telephones with malfunctioning handles, etc., note: 1)bidders should possess valid kspcb license/authorisa tion as reprocessor towards disposal of e-waste . | lot no - lot name - scrap of used steel wire ropes and chain links product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of used/condemned /damaged/reject ed/unserviceable steel wire ropes and chain links with/without connecting hooks, magnets and rounds available on as is where is condition. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - scrap of used lead-acid batteries and dry batteries product type - electrical items category - battery - 0.0 pcb group - used batteries/lead acid batteries/lead acid cells & lead scrap scrap of used,condemned ,rejected and unserviceable lead-acid batteries & dry batteries of differrent size and makes with various voltage & ampere ratings available for disposal on as is where is condition. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of lead acid/dry batteries scrap. ) | lot no - lot name - ms scrap product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps ms scrap of condemned /damaged/reject ed /unserviceable/ old hydraulic cylinders of various types and sizes belonging to differrent equipment models available with or without their accessories on as is where is condition. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - scrap of condemned electrical items product type - electrical items category - others - 0.0 pcb group - e- waste-rule 2022 scrap of condemned /damaged/reject ed /unserviceable/ old electrical items consisting of damaged heavy industrial blowers with motors having heavy castiron casings/sheetmet al enclosures/trolley s of various sizes and capacities , heater units, damaged carborizing chambers,control panels with or without accessories,cond emned hand welding sets etc., available on as is where is condition. note: 1)bidders should possess valid kspcb license/authorisa tion as reprocessor towards disposal/collection of e- wastes. | lot no - lot name - scrap of equipment parts made of alluminium die castings product type - metal category - aluminium - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of condemned/ damaged/rejecte d production equipment parts made of alluminium die castings associated with/without ms fittings along with channels & guides made up of alluminium available along with other integrated materials on as is where is condition. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of alluminium scrap.) | lot no - lot name - ms scrap product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps ms scrap of condemned /damaged/reject ed /unserviceable/ old miscellanious items containing various items like nuts ,bolts, washers,elbows,t - connectors,nippl es,studs, blocks,bars,angul ar bends,hooks,sta mped and various other ms items,etc., of various sizes and shapes all mixed in one lot available on as is where is condition. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - scrap of condemned ms hydraullic tube structures product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of condemned/ damaged/rejecte d/unserviceable/ obsolete ms hydraullic tube structures and associated parts containing ms/rubber end fittings & clamps etc.,available on as is where is condition. (note: 1)pallets and containers used for storing are not included in the lot. 2)buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - ms scrap product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps ms scrap of obsolete/used/re jected/condemned /failed /damaged wheel rims & wedge bands of various equipment models available with or without accessories on as is where is condition. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - ms scrap product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps ms scrap of condemned / damaged/used or rejected/un- serviceable field returned items consisting of castings/forgings /machined components and assemblies of gears,shafts,disc s,bars,broken trolleys,tie rods,rack & pinions ,failed transmission casings & covers,axle assemblies,anch ors,wheel & axle hubs,equipment horse collars,anchors,b rake heads,brake oil coolers integral with other metal aggregates/comp osites(if any) pertaining to different equipment models/variants along with other items like used/rejected air cylinders ,tanks etc ., available on as is where is condition. (note:buyers should have | lot no - lot name - scrap of used welding cables product type - electrical items category - cables - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of used,condemned , non- reusable,rejecte d welding cables of various thicknesses , diameters and lengths ,made of copper & other metal alloys with or without insulation /connecting lugs etc..available on as is where is condition. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of metal alloys scrap like copper/brass/gun metal etc.,) | lot no - lot name - scrap of used or rejected miscellanious item product type - miscellaneous category - miscellaneous items - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of condemned / damaged/used or rejected miscellanious items of various metal & metal alloys consisting of items like used/discarded/r ejected ms taps,end fiittings,nozzles,g as regulators made of brass,covers ,unions,elbows,g uards,holders,min iature or small gear items etc., made of ms iron or copper or bronze or gun metal associated with other miscellanious items available on as is where is basis. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of metal alloys scrap like copper/brass/gun metal etc.,) | lot no - lot name - scrap of condemned inserts product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of condemned,dam aged,rejected ,broken tun | lot no - lot name - ms scrap of jigs and fixtures product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps ms scrap of condemned/obsol ete/used/rejecte d jigs & fixtures of various projects available on as is where is condition. note: 1)the gas cutting permission in advance,will be given by beml to the successful buyer to facilitate loading.however, gas cutting to be done as minimum as possible just sufficient to load the materials on the trucks/lorry. 2)buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - scrap of used oil product type - petroleum products category - used/ waste oil - 0.0 pcb group - used spent/burnt oil/used lube oil/used engine oil scrap of used oil (with/without water mix) contained in plastic & ms barrells on as is where is basis condition . (note 1)the bid price per litre shall be inclusive of container price,irrespective of plastic/ms barrell.the transferring of scrap oil from one barrell to another by the buyer is permitted(if required) with his own arrangements to make the partially filled barrells full while lifting.buyers to take care of spillage while loading. 2)buyers should have authorisation from pollution control board as recyclers or re- processors of used oil or spent oil scrap.) | lot no - lot name - scrap of used empty plastic oil barrels of 205/210lts capacity product type - container category - barrel/drum - 0.0 pcb group - empty barrels/containers/l iners contaminated with hazardous chemicals/wastes scrap of used empty plastic oil barrels of 205/210lts capacity .(barrels in damaged conditions also to be taken along with this lot) available on as is where is condition. note: 1) bidders should possess valid kspcb license/authorisa tion as reprocessor towards disposal of empty barrels /hazardous wastes. 2)bidders should use kspcb authorised vehicles only for transportation of the hazardous materials following kspcb norms/rules in order to facilitate beml for raising e-menifests in the kspcb website ) | lot no - lot name - scrap of used empty ms grease oil barrels of 205/210lts product type - container category - barrel/drum - 0.0 pcb group - empty barrels/containers/l iners contaminated with hazardous chemicals/wastes scrap of used empty ms grease/oil barrels of 205/210lts capacity available in damaged/dented or deformed condition to be lifted on as is where is basis . note: 1) bidders should possess valid kspcb license/authorisa tion as reprocessor towards disposal of empty barrels /hazardous wastes. 2)bidders should use kspcb authorised vehicles only for transportation of the hazardous materials following kspcb norms/rules in order to facilitate beml for raising e-menifests in the kspcb website ) | lot no - lot name - scrap of used empty damaged ms oil grease barrels product type - container category - barrel/drum - 0.0 pcb group - empty barrels/containers/l iners contaminated with hazardous chemicals/wastes scrap of used /empty damaged ms oil/grease barrels available in damaged ,dented or deformed condition to be lifted on as is where is basis . the lot contains half cut barrels in damaged condition with or without caps/lids which forms an integral part of the scrap lot. note: 1) bidders should possess valid kspcb license/authorisa tion as reprocessor towards disposal of empty barrels /hazardous wastes. 2)bidders should use kspcb authorised vehicles only for transportation of the hazardous materials following kspcb norms/rules in order to facilitate beml for raising e-menifests in the kspcb website ) | lot no - lot name - scrap of used empty damaged plastic oil barrels product type - container category - barrel/drum - 0.0 pcb group - empty barrels/containers/l iners contaminated with hazardous chemicals/wastes scrap of used/empty damaged plastic oil barrels available in damaged ,dented and deformed condition on as is where is condition.the lot contains half cut barrels in damaged condition with or without caps/lids which form an integral part of the scrap lot. note: 1) bidders should possess valid kspcb license/authorisa tion as reprocessor towards disposal of empty barrels /hazardous wastes. 2)bidders should use kspcb authorised vehicles only for transportation of the hazardous materials following kspcb norms/rules in order to facilitate beml for raising e-menifests in the kspcb website ) | lot no - lot name - scrap of used water tanks product type - miscellaneous category - plastic - 0.0 pcb group - plastic scrap scrap of used/rejected/br oken/damaged overhead water tanks of various capacities(rangin g from 500lts capacity to 30,000ltr capacities) available on as is where is condition. (note :buyers should have authorisation from pollution control board as recyclers or re- processors of plastic wastes/scrap.) | lot no - lot name - scrap of dead wood product type - miscellaneous category - wooden items - 0.0 pcb group - wood waste scraps scrap of dead wood along with packing wooden skids , waste wood with waste plywood sheets, etc., on as is where is basis condition. (note: 1)packing wood may contain bolts ,nuts,nails & hinges which form an integral part of the scrap lot. dismantling the lot inside beml premisis will be allowed to facilitate loading . 2)buyers should have authorisation from pollution control board as recyclers or re- processors of dead wood scrap)
Agency / Dept :
BEML Limited
Due Date :
Aug 25, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16644735
Location : durg , chhattisgarh
Source : GEM Tenders
tender for solid carbide end mill for cnc milling , inserted type end mill cutter for cnc milling , u drill , drill bit , taper shank drill bit , external turning holder for cnc turning , external grooving tool holder for cnc turning , external thread cutting tool holder for cnc turning , boring holder , internal grooving tool holder for cnc turning with initial set of inserts , internal thread cutting tool holder for cnc turning with initial set of inserts, cnc tools, as per attached in bid document
Agency / Dept :
micro small and medium enterprises MSME
Due Date :
Aug 28, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16952677
Location : bangalore , karnataka
Source : GEM Tenders
tender for stg tools thread cutting die 1 1 16 24 uns 3a dia 26.998 x 1.0583 pitch , thread checking plug gauge go and no go 3 8 inc unf 6h , thread checking ring gauge go and no go set m50 x 1.5 6h , thread checking ring gauge go and no go set m39 x 1.5 6g , thread cutting tool sc die m39 x 1.5 , thread cutting chaser set m24 x 2 , end mill cutter ps 35 dia , end mill cutter hss 7.80 mm 2 flute , end mill cutter hss 8.80 mm 2 flute , thread cutting die set hss m10 x 1.25 mm , slitting saw mill cutter hss 2.5 mm thk x 25.4 id x 100 mm od , slitting saw mill cutter hss 1.8 mm thk x 25.4 id x 100 mm od , slitting saw mill cutter hss 1 mm thk x 25.4 id x 100 mm od , thread cutting die hss m6 x 0.8 mm , thread checking ring gauge go and no go m6 x 0.8 mm , single corner round cutter is 6314-82 od 63 mm x id 22 mm x 8 mm width and 4 mm radius , end mill soild carbide ps 4 mm 2 flute , end mill soild carbide ps 5 mm 2 flute , end mill soild carbide ps 6 mm 2 flute , t slot cutter ps solid carbide 32 x 4.5 mm , endmill solid carbide ball nose 2 flute ps 14 mm , thread checking plug gauge go and no go 6 hss m10 x 0.8 , thread checking plug gauge go and no go 6h m62 x 3 , thread checking ring gauge go and no go 6g m62 x 3 , thread checking plug gauge go and no go m68 x 4 , thread checking ring gauge go and no go m6 x 0.5 , thread cutting die hss m6 x 0.5 , drill twist ts hss 16.2 mm dia , drill twist ts hss 19.7 mm dia , drill twist ts hss 25.5 mm dia , thread cutting die set r 1 2 a 1 2 inc bspt , thread checking ring gauge r 1 2 a 1 2 inc bspt , thread cutting die set hss m27 x 1.5 , thread cutting tap hss m27 x 1.5 , thread checking ring gauge m27 x 1.5 go and no go , slitting wheel 2.5 mm thk x id 31.75 mm , turning grooving insert tgmf 402 ic 830 , turning insert dnmg 11040 f3m ic 6025 , end mill cutter carbide corner radius 3 mm dia , tap set hss mp 4ba , tap set hss mp 8ba , tap set hss m 1 4inc 28 unf 2b , tap set hss m 1 4 inc 28 unf 2a , drill twist hss ps 5.25 mm dia , tap hss tap set m6x 0.75 , thread plug gauge go and no go m6 x 0.75 4h , slitting saw cutter 100 mm x 25.4 mm x 3 mm thk , slitting saw cutter 100 mm x 25.4 mm x 4 mm thk , drill twist hss ps 2.70 mm dia , reamer hss 3.0 mm dia , drill twist hss ts 13 mm dia x 200 mm long series , slitting saw cutter 80 mm x 25.4 mm x 1.5mm thk , slitting saw cutter 80 mm x 25.4 mm x 2.0mm thk, ref to atc document for detailed technical specification of the required tools
Agency / Dept :
indian army
Due Date :
Sep 03, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16685674
Location : visakhapatnam , andhra pradesh
Source : GEM Tenders
tender for 188112000000 , 184102000000 , 188100000000 , 188113000000 , 188011000000 , 188080000000, turning inserts, turning insert spun, t-max inserts for lathe, turning insert cnmg, turning carbide insert snmg, turning insert snmg, insert tpkn, inserts for milling cutter
Agency / Dept :
bharat heavy electricals limited BHEL
Due Date :
Aug 20, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Turning And Milling Inserts. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Turning And Milling Inserts sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Turning And Milling Inserts Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Turning And Milling Inserts, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Turning And Milling Inserts Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Turning And Milling Inserts Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Turning And Milling Inserts.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Turning And Milling Inserts depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Turning And Milling Inserts Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Turning And Milling Inserts bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Turning And Milling Inserts. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Turning And Milling Inserts, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Turning And Milling Inserts, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Turning And Milling Inserts?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Turning And Milling Inserts tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Turning And Milling Inserts?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Turning And Milling Inserts, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Turning And Milling Inserts is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All