sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

48Latest Steel equal angle Tenders List

Latest Steel equal angle Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Steel equal angle tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Steel equal angle tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Steel equal angle Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Steel equal angle tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Steel equal angle Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Steel equal angle Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Steel equal angle Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Steel equal angle tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Steel equal angle Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Steel equal angle sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Steel equal angle tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Steel equal angle tenders.

Is EMD mandatory for all Steel equal angle tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Steel equal angle work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Steel equal angle tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Steel equal angle Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17564528
Location : gwalior , madhya pradesh
Source : GEM Tenders
NEW TENDER
tender for misc em and br items - waste fittings for washbasin and sinks as per is 2963 (q3) , span bolt and nut (q3) , wood screws (q3) , electric bells and accessories as per is 2268 (q3) , gland packaging (q3) , curtain pipe, sider and mounting bracket (q4) , aluminium ferrule 10 sqmm isi marked , gi tee 15 mm , gi elbow 20 mm , thiner pack of 1 ltr , gi tee 20 mm , nails 1 inch , nut and bolts 30 x10mm with washer , aluminium lugs 35 sqmm isi marked , plumber thread jute , copper lugs 50 sqmm isi marked , aluminium ferrule 70 sqmm isi marked , stainless steel door handle 150 mm isi marked , pvc corner shelf , pvc stop cock 15mm , gi tee equal 20 mm isi marked , gi tee reducer 40x15 mm isi marked , gi tee reducer 40x20 mm isi marked , led street light 36 watt , gate valve brass 25 mm , gi plug 20mm , gi nipple 15x100mm , gi socket reducer 15x20mm , gi nipple 20x150mm , grating stainless steel 75mm with hole isi marked , gi union 15mm , aluminium ferrule 95 sqmm isi marked , gi socket 25 mm , gi plug 15mm isi marked , lamp holder pvc insulated body batten angular type , stainless steel tower bolt 150mm isi marked , gi socket 20 mm , pvc self 470x114x36mm , plug top 3 pin 16 amp , gi socket 40 mm isi marked , gi plug 80mm isi marked , gi union 20 mm isi marked , pvc waste pipe 32x800 mm , aluminium glazing beading 19 mm x 1 mm thick 02 mtr long isi marked , pvc connection 15x450mm , glass corner shelf , glass pane black 4x 4x4mm , soap case ptmt , pvc connection 15x600mm , putty oil for glass pane , cp stop cock 15mm , ply wood 8x4x6mm isi marked , floor paint tara cota , cp toilet paper holder with cutter , cp spindle 15 mm , butter fly valve water type size 50 mm , glass pane forsted 4x 4x4mm , door stopper brass 6 inch , gi tee reducer 25x15 mm isi marked , gi elbow 50 mm isi marked , butt hinges ms 75 mm isi marked , float valve 15mm syment complect , gi nipple 80 mm length 150 mm isi marked , cp angle cock 15mm with flange , pvc flushing kit , pvc 2 way bib cock 15mm , aluminium lugs 400 sqmm isi marked , lock for aluminium door 4 lever 100mm narrow style , tinned copper fuse wire 6amp , heat shrinkable straight through joints kit 1 point 1 kv grade suitable for lt xlpe cable 35 to 50 sqmm 3.5 core , rubber sheet neoprene rubber sheet neoprene 4mm thick as per sample size 4x2 m weight 15 to 16 kg , tape insulation 20 mm 25 mtr long , rubber mating 19mm thick length 1x2 mtr , glass pane plain 4 x 4 x4mm , offload change over switch in sheet metal enclousre 415v 4 pole 400a , offload change over switch in sheet metal enclousre 415v 4 pole 630 a , modular switch socket combination 3 by 3 pin 16 amp , floor spring for aluminium door isi , lead pig , gate valve 15mm , spindle and nut gun metal for sluice valve 100 mm dia , cp centre hole mixer 15mm , pvc pillar cock 15mm , electric rubber hand gloves , tinned copper fuse wire 32a isi marked , cp pillar cock 15mm , toilet mirror 24x18 , lubricating oil poe 320 for air compressor refrigation , tyton joints for di pipe line 80mm dia isi marked , glass pane plain 4x 3x4 , gi nipple 25x150mm , cistern washer black and white , cable pvc aluminum conductor twin core 2 point 5 sqmm , onload change over switch in sheet metal enclosure 415v 4pole 63a , gi pipe medium grade 40 mm , grating stainless steel 100mm with hole, aluminium ferrule 10 sqmm isi marked, gi tee 15 mm, gi elbow 20 mm, thiner pack of 1 ltr, gi tee 20 mm, nails 1 inch, nut and bolts 30 x10mm with washer, aluminium lugs 35 sqmm isi marked, plumber thread jute, copper lugs 50 sqmm isi marked, aluminium ferrule 70 sqmm isi marked, stainless steel door handle 150 mm isi marked, pvc corner shelf, pvc stop cock 15mm, gi tee equal 20 mm isi marked, gi tee reducer 40x15 mm isi marked, gi tee reducer 40x20 mm isi marked, led street light 36 watt, gate valve brass 25 mm, gi plug 20mm, gi nipple 15x100mm, gi socket reducer 15x20mm, gi nipple 20x150mm, grating stainless steel 75mm with hole isi marked, gi union 15mm, aluminium ferrule 95 sqmm isi marked, gi socket 25 mm, gi plug 15mm isi marked, lamp holder pvc insulated body batten angular type, stainless steel tower bolt 150mm isi marked, gi socket 20 mm, pvc self 470x114x36mm, plug top 3 pin 16 amp, gi socket 40 mm isi marked, gi plug 80mm isi marked, gi union 20 mm isi marked, pvc waste pipe 32x800 mm, aluminium glazing beading 19 mm x 1 mm thick 02 mtr long isi marked, pvc connection 15x450mm, glass corner shelf, glass pane black 4x 4x4mm, soap case ptmt, pvc connection 15x600mm, putty oil for glass pane, cp stop cock 15mm, ply wood 8x4x6mm isi marked, floor paint tara cota, cp toilet paper holder with cutter, cp spindle 15 mm, butter fly valve water type size 50 mm, glass pane forsted 4x 4x4mm, door stopper brass 6 inch, gi tee reducer 25x15 mm isi marked, gi elbow 50 mm isi marked, butt hinges ms 75 mm isi marked, float valve 15mm syment complect, gi nipple 80 mm length 150 mm isi marked, cp angle cock 15mm with flange, pvc flushing kit, pvc 2 way bib cock 15mm, aluminium lugs 400 sqmm isi marked, lock for aluminium door 4 lever 100mm narrow style, tinned copper fuse wire 6amp, heat shrinkable straight through joints kit 1 point 1 kv grade suitable for lt xlpe cable 35 to 50 sqmm 3.5 core, rubber sheet neoprene rubber sheet neoprene 4mm thick as per sample size 4x2 m weight 15 to 16 kg, tape insulation 20 mm 25 mtr long, rubber mating 19mm thick length 1x2 mtr, glass pane plain 4 x 4 x4mm, offload change over switch in sheet metal enclousre 415v 4 pole 400a, offload change over switch in sheet metal enclousre 415v 4 pole 630 a, modular switch socket combination 3 by 3 pin 16 amp, floor spring for aluminium door isi, lead pig, gate valve 15mm, spindle and nut gun metal for sluice valve 100 mm dia, cp centre hole mixer 15mm, pvc pillar cock 15mm, electric rubber hand gloves, tinned copper fuse wire 32a isi marked, cp pillar cock 15mm, toilet mirror 24x18, lubricating oil poe 320 for air compressor refrigation, tyton joints for di pipe line 80mm dia isi marked, glass pane plain 4x 3x4, gi nipple 25x150mm, cistern washer black and white, cable pvc aluminum conductor twin core 2 point 5 sqmm, onload change over switch in sheet metal enclosure 415v 4pole 63a, gi pipe medium grade 40 mm, grating stainless steel 100mm with hole
Agency / Dept :
ministry of defence MOD
Due Date :
Oct 12, 2026 (10 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17444208
Location : baramulla , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for and f 32mm dia three-way pp-r equal tee plain fittings , s and f 32mm threaded transition sockets with brass inserts pp-r equal socket , s and f 32mm dia three-piece pp-r plain union fittings , s and f 32mm dia pp-r equal elbow 90- degree directional fittings , s and f 32mm dia pp-r equal elbow 45-degree directional fittings , s and f 32mm dia pp- r pipe end cap plain plug termination fittings , s and f 32mm dia premium industrial ppr brass gate valves , s and f 32mm dia 100mm long heavy-duty brass male hex nipple transition fittings , s and f 32mm dia 50mm long heavy- duty brass male hex nipple transition fittings , s and f 32mm heavy duty polypropylene random copolymer ppr type 3 tank nipple , s and f 32mm high pressure automatic ptmt polytetra methylene terephthalate float valve assembly , s and f water storage tank cylindrical vertical rotational moulded polyethylene triple layered with close top lid capacity 10000 ltrs , s and fwater storage tank cylindrical vertical rotational moulded polyethylene triple layered with close top lid capacity 1000 ltrs , s and fwater storage tank cylindrical vertical rotational moulded polyethylene triple layered with close top lid capacity 500 ltrs , s and f for water storage tank cylindrical vertical rotational moulded polyethylene triple layered with close top lid capacity 2000 ltrs , supplying and applying closed cell elastomeric nitrile rubber epdm thermal insulation tubes of specified thickness and inner diameter 75mm , supplying and applying closed-cell elastomeric nitrile rubber epdm thermal insulation tubes of specified thickness and inner diameter 32mm , supplying and applying closed-cell elastomeric nitrile rubber epdm thermal insulation tubes of specified thickness and inner diameter 20mm , s and f 20mm dia polypropylene random copolymer ppr three layer pipes for hot and cold water distribution system , s and f 20mm dia three way ppr equal tee plain fittings , s and f 20mm threaded transition sockets with brass inserts , s and f 20mm dia three-piece ppr plain union fittings , s and f 20mm dia ppr equal elbow 90-degree directional fittings , s and f 20mm dia ppr pipe end cap plain plug termination fittings , s and f 20mm dia premium industrial ppr brass gate valves , s and f 20mm dia 100mm long heavy duty brass male hex nipple transition fittings , s and f 20mm dia 50mm long heavy duty brass male hex nipple transition fittings , s and f 20mm nominal bore heavy duty polypropylene random copolymer ppr type 3 tank nipple , supplying fixing and testing a 15mm nominal bore heavy duty chrome plated brass bib tap with a wall flange internal cartridge washer assembly and aerator , supplying fixing and jointing a 20mm nominal outer diameter x 15mm , m and l cement opc 43 grade in hdpe bags 50 kgs , m and l quick setting compound , m and l m sand , m and l aggregate 20mm , m and l aggregate 40mm , m and l aggregate 63mm , m and l load bearing concrete pcc soild blocks , m and l cement base paint , m and l hdpe sand bag laminated off size 75x40cm , m and l freshly burnt fat lime class c white in clour , m and l for providing fabricating supplying and erecting structural steelwork in built-up sections trusses frames or individual members using mild steel ms equal angles of size 100 x 100 x 6mm , m and l for providing fabricating supplying and erecting structural steelwork in built up sections trusses frames or individual members using mild steel ms equal angles of size 75 x 75 x 6mm , m and l for providing, fabricating supplying and, wss with borewell, construction of 125 mm dia machine drilled borewell using 125 mm dia min depth 150 rm, installation and fixing of 01 nos of triplex plunger pump of 5 hp 550 rpm with discharge capacity of 46 lpm and working pressure 45 kg cm square, amc for 7 point 5 hp submersible pump 5hp plunger pump and borewell depth 150m with dia 0 point 125m at 1 percentage of total cost of project for three years, s and f non clog vertical submersible pumps 7.5 hp three phase 440 volts, s and f fully automatic star delta asd starter for 7.5 to 10 hp 3 phase 440 volt submersible pump, pvc insulated pvc sheathed multistranded copper conductor flat 3 core 6 sqmm, s and f protection steel cable 8mm thick, s and f 125 mm dia ms pipe, s and f 125 mm gi clamp, s and f gi pipe 75mm nominal bore medium grade, s and f 75mm dia polypropylene random copolymer three-layer pipes, s and f 75mm dia three way ppr equal tee plain, s and f 75mm threaded transition sockets with brass inserts pp-r equal socket, s and f 75mm dia three-piece pp-r plain union fittings, s and f 75mm dia pp-r equal elbow 90-degree directional fittings, s and f 75mm dia pp-r equal elbow 45-degree directional fittings, s and f 75mm dia pp-r pipe end cap, s and f 75mm dia premium industrial ppr brass gate valves, s and f 75mm dia ppr integral body non return valve nrv, s and f 75mm dia 100mm long heavy-duty brass male hex nipple transition fittings, s and f 75mm dia 50mm long heavy-duty brass male hex nipple transition fittings, s and f 1-in-2-out splitter diverter tee socket 75mm dia with top out at 32mm piping network ppr, s and f 75mm nominal bore outer diameter heavy duty polypropylene random copolymer ppr type 3tank nipple, s and f 32mm dia polypropylene random copolymer pp-r three-layer pipes for hot cold water distribution system, s and f 32mm dia three-way pp-r equal tee plain fittings, s and f 32mm threaded transition sockets with brass inserts pp-r equal socket, s and f 32mm dia three-piece pp-r plain union fittings, s and f 32mm dia pp-r equal elbow 90-degree directional fittings, s and f 32mm dia pp-r equal elbow 45-degree directional fittings, s and f 32mm dia pp-r pipe end cap plain plug termination fittings, s and f 32mm dia premium industrial ppr brass gate valves, s and f 32mm dia 100mm long heavy-duty brass male hex nipple transition fittings, s and f 32mm dia 50mm long heavy-duty brass male hex nipple transition fittings, s and f 32mm heavy duty polypropylene random copolymer ppr type 3 tank nipple, s and f 32mm high pressure automatic ptmt polytetra methylene terephthalate float valve assembly, s and f water storage tank cylindrical vertical rotational moulded polyethylene triple layered with close top lid capacity 10000 ltrs, s and fwater storage tank cylindrical vertical rotational moulded polyethylene triple layered with close top lid capacity 1000 ltrs, s and fwater storage tank cylindrical vertical rotational moulded polyethylene triple layered with close top lid capacity 500 ltrs, s and f for water storage tank cylindrical vertical rotational moulded polyethylene triple layered with close top lid capacity 2000 ltrs, supplying and applying closed cell elastomeric nitrile rubber epdm thermal insulation tubes of specified thickness and inner diameter 75mm, supplying and applying closed-cell elastomeric nitrile rubber epdm thermal insulation tubes of specified thickness and inner diameter 32mm, supplying and applying closed-cell elastomeric nitrile rubber epdm thermal insulation tubes of specified thickness and inner diameter 20mm, s and f 20mm dia polypropylene random copolymer ppr three layer pipes for hot and cold water distribution system, s and f 20mm dia three way ppr equal tee plain fittings, s and f 20mm threaded transition sockets with brass inserts, s and f 20mm dia three-piece ppr plain union fittings, s and f 20mm dia ppr equal elbow 90-degree directional fittings, s and f 20mm dia ppr pipe end cap plain plug termination fittings, s and f 20mm dia premium industrial ppr brass gate valves, s and f 20mm dia 100mm long heavy duty brass male hex nipple transition fittings, s and f 20mm dia 50mm long heavy duty brass male hex nipple transition fittings, s and f 20mm nominal bore heavy duty polypropylene random copolymer ppr type 3 tank nipple, supplying fixing and testing a 15mm nominal bore heavy duty chrome plated brass bib tap with a wall flange internal cartridge washer assembly and aerator, supplying fixing and jointing a 20mm nominal outer diameter x 15mm, m and l cement opc 43 grade in hdpe bags 50 kgs, m and l quick setting compound, m and l m sand, m and l aggregate 20mm, m and l aggregate 40mm, m and l aggregate 63mm, m and l load bearing concrete pcc soild blocks, m and l cement base paint, m and l hdpe sand bag laminated off size 75x40cm, m and l freshly burnt fat lime class c white in clour, m and l for providing fabricating supplying and erecting structural steelwork in built-up sections trusses frames or individual members using mild steel ms equal angles of size 100 x 100 x 6mm, m and l for providing fabricating supplying and erecting structural steelwork in built up sections trusses frames or individual members using mild steel ms equal angles of size 75 x 75 x 6mm, m and l for providing, fabricating supplying and erecting in position 10mm thick mild steel ms plates, m and l for painting with two or more coats of premium synthetic enamel paint of approved brand and manufacture in the required shade over an undercoat of approved steel primer zinc chromate red oxide, steel primer, pre fabricated pump shed of size 2.4m x 2.4m and height 1.8m at front side and 1.60 m at rear side above ffl 300 mm hight with angle iron of 50x50x6 mm for all columnpurlin and rafter welded with connecting ms plates 6mm thick, m and l spin on lube oil filter, m and l fuel filter primary, m and l fuel filter element secondary, m and l main element for air cleaner, m and l v belt cogged avx 10 1265l, m and l v belt cogged avx 10 1136, m and l hose for air cleaner, m and l hose for lube oil drain, supply testing delivery installation commissioning and successful opertaion of 7.5 kva diesel generator dg set, xlpe insulated pvc sheathed heavy duty armoured multi core cable 16 sqmm 2 core aluminium conductor for working voltage upto & including 1100 volts, on and off changeover switch 63 amp rating four pole 415 volt t with side handle operation, electrical rubber insulating mat size 1.0 x 2.0 m 3mm thick
Agency / Dept :
indian army
Due Date :
Oct 05, 2026 (3 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17194043
Location : mumbai , maharashtra
LIVE TENDER
tender for stainless steel equal angle., stainless steel equal angle moulding size : 2440 x 25 x 25 x 1 mm to drg. no. misc. sk. 3542, alt. 5. material and specification as per drawing. - warranty period: 30 months after the date o f delivery -quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs
Agency / Dept :
central railway CR
Due Date :
Oct 09, 2026 (7 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17353796
Location : mumbai , maharashtra
Source : GEM Tenders
LIVE TENDER
tender for 26bqel032 (n9520-000018) steel angle equal ms 75mmx75mmx6mm
Agency / Dept :
indian navy
Due Date :
Oct 10, 2026 (8 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17460246
Location : bareilly , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for elbow medium grade 15mm dia isi marked , gl elbow medium grade 20mm dia isi marked , gl elbow reducing medium grade isi marked size 20 x15mm , gl hex nipple 15mm , gl nipple medium grade 15x100 mm long , gl nipple medium grade 15x150 mm long , gl nipple medium grade 15x200 mm long , gl nipple medium grade 15x300 mm long , gl nipple medium grade 15x75 mm long , gl nipple medium grade 20x100 mm long , gl nipple medium grade 20x150 mm long , gl nipple medium grade 20x75 mm long , gl nipple medium grade 25x100 mm long , gl socket medium grade isi marked 15mm , gl socket medium grade isi marked 20mm , gl socket medium grade isi marked 25mm , gl socket reducer 20x15mm , gl socket reducer 25x15mm , gl socket reducer 25x20mm , gl tee equal medium grade screwed isi 15mm , gl tee equal medium grade screwed isi 20mm , gl tee equal medium grade screwed isi 25mm , gl union medium grade complete isi marked 15mm , gl union medium grade complete isi marked 20mm , handle soft pu for chair revolving , jet spray for europian wc , knob anodoised 25mm with screws for drawer , knob anodoised 32mm with screws for drawer , lock brass for drawer w keys for table steel , looking mirror of size 450x 600x5mm thick with 9mm plywood back , looking mirror 5mm thick with ply wood back 9mm thick 375x1200mm , looking mirror 5mm thick with ply wood back 9mm thick 375x750mm , plywood bwr commercial grade of size 7 feet x3 feet x12mm , plywood bwr commercial grade of size 8feetx4feetx12mm , plywood bwr commercial grade of size 8feetx4feetx4mm , plywood bwr commercial grade of size 8feetx4feetx6mm , plywood one side teak face bwr or commercial grade of size 8feetx4feet x4mm , plywood one side teak face bwr or commercial grade of size 8feetx4feetx6mm , prelaminated mdf board size 8feetx4feetx18 or19 mm thick , ptmt angle stop cock 15mm , ptmt bib cock long body with flange 15mm , ptmt bib tap 15mm , ptmt connection pipe with check nut 450mm , ptmt connection pipe with check nut 600mm , ptmt down pipe 32mm x 900mm long complete for wash basin , ptmt flushing pipe for low level flushing cistern 32mm dia , ptmt grating 100mm dia , ptmt grating 125mm dia , ptmt grating 140mm dia , ptmt pillar tap 15mm , ptmt stop cock 15mm external thread , ptmt stop cock 15mm intenal thread , ptmt swiveling shower rose 15mm with shower arm , pvc cistern low level 10 ltrs , pvc float valve 15mm with fitting , pvc float valve 20mm with fitting , pvc seat cover complete with hinges for wc white colour , pvc seat for chair dinning map , red oxide primer 1st quality 4 ltr pack , s s cotton plumbing thread , ss curtain rod 20mm 12 ft long , ss kitchen sink combined with drainage board 37 inchx18inchx8inch , stainless steel plate rack 30inchx30inchx10inch , synthetic adhesive fevicol special repair 998 in one kg pack , synthetic enamel paint black colour 4 ltr pack , synthetic enamel paint gray colour 4 ltr pack , synthetic enamel paint olive green colour 4 ltr pack , synthetic enamel paint silver colour 4 ltr pack , synthetic enamel paint white colour 4 ltr pack , synthetic enamel paint white primer 4 ltr pack , touch wood 1 ltr pack , turpentine oil 5 ltr pack , twin castor wheel for chair revolving of size 50mm dia set of 05pcs , two holes brass lock for almirah , varnish , vitreous china wash hand basin white 550x400mm , water sealing taflon tape 20mm 10mtr long , wire gauge ss 1.2 mtr wide gauge 0.5 mm dia wire , aluminium door handle 100mm, aluminium door handle 125mm, aluminium door handle 150mm, aluminium door stopper single rod with rubber bush, aluminium sliding door bolt aldrop 200mm long, aluminium tower bolts 100mm, aluminium tower bolts 150mm, aluminium tower bolts 200mm, brass bib tap 15mm external thread, brass bib tap 15mm internal thread, brass spindle square type 15mm, brush paint 25mm, brush paint 50mm, brush paint 75mm, cp bib tap 15mm long body, cp bottle trap, cp connection 15mm bore, cp d type handle 100mm, cp d type handle 75mm, cp extension nipple 15mm 1 inch external thread, cp extension nipple 15mm 1.5 inch external thread, cp extension nipple 15mm 0.75 inch external thread, cp health faucet 15mm x 1.5mtr pipe, cp pillar tap with mixture for hot and cold 15mm, cp towel rail 600x20mm, cp two way angle cock 15mm, cp wall mixer with telephonic shower arrangement or bend of 15mm bore, curtain rod bracket 25mm dia, curtain rod knob 25mm dia, cushion for sofa set size 21inch x22 inch x4 inch thick with coverd fabric, door closer aluminium body hydraulically regulated of weight 61 to 80 kgs, foam sheet 6 feet x3 feet x100mm, foam sheet 6 feet x3 feet x75mm, galvanized ms wire mesh 0.50 nominal dia of 1.18mm and 1.2 mtr wide, gl bend medium with one socket screwed 15mm dia, gl elbow medium grade 15mm dia isi marked, gl elbow medium grade 20mm dia isi marked, gl elbow reducing medium grade isi marked size 20 x15mm, gl hex nipple 15mm, gl nipple medium grade 15x100 mm long, gl nipple medium grade 15x150 mm long, gl nipple medium grade 15x200 mm long, gl nipple medium grade 15x300 mm long, gl nipple medium grade 15x75 mm long, gl nipple medium grade 20x100 mm long, gl nipple medium grade 20x150 mm long, gl nipple medium grade 20x75 mm long, gl nipple medium grade 25x100 mm long, gl socket medium grade isi marked 15mm, gl socket medium grade isi marked 20mm, gl socket medium grade isi marked 25mm, gl socket reducer 20x15mm, gl socket reducer 25x15mm, gl socket reducer 25x20mm, gl tee equal medium grade screwed isi 15mm, gl tee equal medium grade screwed isi 20mm, gl tee equal medium grade screwed isi 25mm, gl union medium grade complete isi marked 15mm, gl union medium grade complete isi marked 20mm, handle soft pu for chair revolving, jet spray for europian wc, knob anodoised 25mm with screws for drawer, knob anodoised 32mm with screws for drawer, lock brass for drawer w keys for table steel, looking mirror of size 450x 600x5mm thick with 9mm plywood back, looking mirror 5mm thick with ply wood back 9mm thick 375x1200mm, looking mirror 5mm thick with ply wood back 9mm thick 375x750mm, plywood bwr commercial grade of size 7 feet x3 feet x12mm, plywood bwr commercial grade of size 8feetx4feetx12mm, plywood bwr commercial grade of size 8feetx4feetx4mm, plywood bwr commercial grade of size 8feetx4feetx6mm, plywood one side teak face bwr or commercial grade of size 8feetx4feet x4mm, plywood one side teak face bwr or commercial grade of size 8feetx4feetx6mm, prelaminated mdf board size 8feetx4feetx18 or19 mm thick, ptmt angle stop cock 15mm, ptmt bib cock long body with flange 15mm, ptmt bib tap 15mm, ptmt connection pipe with check nut 450mm, ptmt connection pipe with check nut 600mm, ptmt down pipe 32mm x 900mm long complete for wash basin, ptmt flushing pipe for low level flushing cistern 32mm dia, ptmt grating 100mm dia, ptmt grating 125mm dia, ptmt grating 140mm dia, ptmt pillar tap 15mm, ptmt stop cock 15mm external thread, ptmt stop cock 15mm intenal thread, ptmt swiveling shower rose 15mm with shower arm, pvc cistern low level 10 ltrs, pvc float valve 15mm with fitting, pvc float valve 20mm with fitting, pvc seat cover complete with hinges for wc white colour, pvc seat for chair dinning map, red oxide primer 1st quality 4 ltr pack, s s cotton plumbing thread, ss curtain rod 20mm 12 ft long, ss kitchen sink combined with drainage board 37 inchx18inchx8inch, stainless steel plate rack 30inchx30inchx10inch, synthetic adhesive fevicol special repair 998 in one kg pack, synthetic enamel paint black colour 4 ltr pack, synthetic enamel paint gray colour 4 ltr pack, synthetic enamel paint olive green colour 4 ltr pack, synthetic enamel paint silver colour 4 ltr pack, synthetic enamel paint white colour 4 ltr pack, synthetic enamel paint white primer 4 ltr pack, touch wood 1 ltr pack, turpentine oil 5 ltr pack, twin castor wheel for chair revolving of size 50mm dia set of 05pcs, two holes brass lock for almirah, varnish, vitreous china wash hand basin white 550x400mm, water sealing taflon tape 20mm 10mtr long, wire gauge ss 1.2 mtr wide gauge 0.5 mm dia wire and aperture 1.18mm
Agency / Dept :
indian army
Due Date :
Oct 05, 2026 (3 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17398860
Location : udham singh nagar , uttarakhand
Source : GEM Tenders
LIVE TENDER
Tender For Carbon Steel Pipe Heavy Duty Seamless Pipe 2 inch , 2inch 90 deg. Bend , 2 inch X 1 Reducer with 4 Nos. stud-bolt and Washer, Jumper , 2 inch X 2 Inch Equal Tee 4 Nos Stud - Bolt and Waser, Jumper , PNG Gas Ball Valve 2 Inch with Metallic Gas Kit , PNG Gas Ball Valve 1 and half Inch Flange End with Metallic Gas Kit , Weatherproof S.S. Pressure Gauge 100mm Dia Range , MS Channel Angle Support 50mm x50mm x 6mm Support , ITC of Internal piping work , Painting work , Third Party Inspection Charges paid to TPI Agency , Supply of NRB with Installation complete , LPG Gas Converted by PNG Gas With Material , brash Nipple 1.5 inch with Installation, Installation of PNG pipelines, Carbon Steel Pipe Heavy Duty Seamless Pipe 2 inch, 2inch 90 deg. Bend, 2 inch X 1 Reducer with 4 Nos. stud-bolt and Washer, Jumper, 2 inch X 2 Inch Equal Tee 4 Nos Stud - Bolt and Waser, Jumper, PNG Gas Ball Valve 2 Inch with Metallic Gas Kit, PNG Gas Ball Valve 1 and half Inch Flange End with Metallic Gas Kit, Weatherproof S.S. Pressure Gauge 100mm Dia Range, MS Channel Angle Support 50mm x50mm x 6mm Support, ITC of Internal piping work, Painting work, Third Party Inspection Charges paid to TPI Agency, Supply of NRB with Installation complete, LPG Gas Converted by PNG Gas With Material, brash Nipple 1.5 inch with Installation
Agency / Dept :
indian institute of management IIM
Due Date :
Oct 12, 2026 (10 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17518081
Location : prayagraj , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for procurement of misc br stores copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , stainless steel sinks for domestic purposes (v3) as per is 13983 (q2) , bathroom or toilet mirror (v3) (q4) , health faucet (q3) , bathroom water shower (v2) (q3) , towel rail (q3) , plastic bib taps, pillar taps, angle valves & stop valves for hot & cold water services conforming to is 9763 (q3) , (vitreous china) - washdown water closets as per is 2556 (q3) , wash basins - vitreous sanitary appliances (vitreous china) conforming to is 2556 (part 4) (q3) , cushion cover 21 inch x 22 inch x 4 inch rate not less than rs 550 per rm , glass shelf 500mmx125mm , glass plane frosted or figured 3mmx4 ft x4 ft , prelaminated hdhmr board bsl 8 ft x4 ft x18mm , toilet paper holder , socket gi 40 mm , corner glass shelf 200mm set of three , glass sheet 1200x1200x3mm plain , shower brass arm 375 mm , ss aldrop rod 250mm , shower brass arm 300 mm , ball cock ptmt 20mm complete with epoxy coated alluminium rod and hd ball , nipple gi 15 mm x75mm , mortice lock of size 100mm , pvc braided connection pipe hot water supply 18 inch , pvc connection 15mm x 600 mm , plywood bwp 8 ft x4 ft x 6mm , sliding door bolt almm 250 mm , ss tower bolt 250 , shower round abs chrome without arms , ball cock pvc 25mm complete with epoxy coated alluminium rod and hd ball , plywood one side teak face one side commercial 8 ft x4 ft x 6mm bwr grade , telescopic channel 12 inch set of two , piano hings ss 6 ft x point 75 inch , brass pegs 100 mm for hat stand mirror , tee equal gi 25 mm , ss tower bolt 150 , helical door spring ms of size 150mm , union socket gi 25 mm , pvc shoes chairs as per sample 100 pcs in pkt , ss aldrop rod 200mm , white cement in 5 kg pack , laminated sheet 8 ftx4 ftx 0 point 8 mm thick , ss fancy handle 125 mm , tower bolt almm 200mm , nipple gi 20 mm x150 mm , ss aldrop rod 300mm , elbow gi 15 mm , magnetic catcher , sliding door bolt ms 250mm , union socket gi 20 mm , ss cp handle 150 mm , pvc water storage tank lid for 1000ltr capacity , touch wood polish , elbow gi 20 mm , nipple gi 15 mm x 200mm , tee reducing gi 20x15mm , socket reducing 25 x 20 mm , socket reducing 20 x 15 mm , sliding door bolt ms 300 mm , hydaulic hinges med size 08 degrees set of two , tee equal gi 20 mm, as per sample, make prayag or sparsh pearl or cera, make gold plus isi marked, make archid or action tesa or century, make prayag or crown, make godrej or link or harrison, make archid or greenply or century, make unique or classic, make prayag or sparsh pearl or silver shine, make ebco or hettich or ipco or hepo, make mahajan or maharaja, make jk or birla, make nerolac or berger or asian paints
Agency / Dept :
indian army
Due Date :
Oct 05, 2026 (3 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17520397
Location : lucknow , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for main fire pump , diesel driven pump , jockey pump , terrace pump , control panel , starter , m s pipe , s and fixing internal hydrant valve , supply and fixing of external yard hydrant valve , sfc of butterfly valve , s and fixing of orifice plate , pitc non return valve , pitc of stainless steel y strainer , s and fixing of 15 m hose pipe , s and fixing first aid hose reel , s and fixing 63 mm dia gun metal short branch pipe , s and fixing of fire brigade connection , foot valve , air vessel , pressure switch , pressure gauge , installation control valve of cast iron body , s and f of hose cabinet , cutting holes , supply of cable , laying of cable , s and m end termination , s and f fire cable , cable tray , g i plate earthing , p and f gi strip , gi strip for looping , p and f gi earth wire , p and f gi pipe, supply installation testing and commissioning of firefighting with wet riser system, sh 1 wet riser system main fire pump a supplying, installation, testing and commissioning of electric driven main fire pump conforming to is 12469 2019 suitable for automatic peration and consisting of following complete in all respects as required. b horizontal type multistage centrifugal split casing pump of cast iron body and bronze impeller with stainless steel shaft fire pump capable for delivery of 2280 lpm against atotal head of 70 mtrs approximately while running at 1450 1500 rpm mechanical seal as required bsnl approved make. c suitable hp squirrel cage induction motor tefc synchronous speed 1500 rpm suitable for operation on 415 volts 3 phase 50 hz ac supply with ip 55 protection for enclosure horizontal foot mounted type with class. f insulation conforming to is 12615 2018. d m.s. fabricated common base plate coupling,coupling guard, foundation bolts etc. as required. e suitable cement concrete foundation duly plastered with anti vibration pads note the head of the pump is selected in a manner so as to give a minimum 3.5kgf /cm2 pressure at the highest/farthest point. the pump room is situated on the underground water tank. 2280 lpm at 70 m head, diesel driven pump a supplying, installation, testing and commissioning of die sel engine driven main fire pump conforming to is 12469 019 suitable for automatic operation and consisting of following, complete in all respects, as required diesel driven pump b horizontal pe, stage, centrifugal pump of cast of iron body and bronze peller with stainless steel shaft, mechanical seal suitable to delivering 2280 lpm against atoatl head of 70 mtrs approxi as required.c suitable hp, 1500 rpm water cooled with radiator, diesel engine conforming to relevant is standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe xtended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential ilencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required.d. m.s fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as quired. e suitable cement concrete foundation duly plastered and with anti vibration pads. note the head of the pump is selected in a manner so as to give a minimum 3.5kgf /cm2 pressure at the highest/farthest point. the pump room is situated on the underground water tank. 2280 lpm at 70 m head., jockey pump a supplying, installation, testing and commissioning of electric driven pressurisation pump conforming to is 12469 2019 suitable for automatic operation and consisting of following, complete in all respects as required jockey pump b horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required. (c)suitable hp squirell cage induction motor tefc type suitable for operation on 415 volts, 3 phase 50 hz ac supply with ip 55 class of protection for enclosure, horizontal foot mounted type with class f insulation, conforming to is 12615 2018. d m.s. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (e) suitable cement concrete foundation duly plastered and with anti vibration pads. note the pump room is situated on the underground water tank. 180 lpm at 70 m head, supplying, installation, testing and commissioning of electric driven terrace pump conforming to is 12469 2019 suitable for automatic operation and consisting of following, complete in all respects, as required terrace pump. b horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required. c suitable hp squirell cage induction motor tefc type suitable for operation on 415 volts, 3 phase, 50 hz, ac supply with ip55 class of protection for enclosure, horiziontal foot mounted type with class f insulation, conforming to is 12615 2018. d m.s.fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. e suitable cement concrete foundation duly plastered and with anti vibration pads. 900 lpm at 35 m head., control panels fabrication supply installation testing and commissioning of electrical control panel of cubical construction floor mounted type fabricated out of 2mm thick crca, artmentalised with hinged lockable doors, dust and vermin proof powder coated of approved shade after 7 tank treatment process, cable alley, inter connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring earth terminals, numbering etc. complete, suitable for main fire pump, pressurisation pump and diesel pump set complete as per cpwd specification with following in coming and outgoings, suitable for operation on 415v, 3 phase, 50hz ac supply with enclosure protection class ip 42 as required. incoming 250a, 50ka 4 pole mccb, ic equal to 100 percent icu rating digital voltmeter 0 500v with selector switch digital ammeter 0 250 a with selector swtich and cts etc. led type ryb phase indicating lamps, on, off, trip indicating lamps set of copper bus bar 300a. outgoing note all outgoing feeders for pumps should have digital ammeter with selector switches, and led type on, off, trip indicating lamps main fire pump 125 a, 50katpn mccb, ics is equal to 100 percent icu, with fully automatic star/delta starter suitable for 60 hp pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/off operation. jockey pump jockey pump 63 a, 50ka tpn mccb, icsis equal to 100 percent icu, with suitable hp fully automatic star/delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, note may please be see at atc of special repair no. 5, supply installation testing and commissioning of fully automatic dol starter for terrace pump terrace pump siutable for operation on 3 phase 415 volt ac supply i/c making inter connection testing etc as requiored at site., sh ii pipes and accessories. providing laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation and providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per is 10221, refilling the trench etc. of following sizes complete as required. 150 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 50 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 80 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required.100 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 150 mm dia, providing, laying, testing and commissioning of c class heavy duty ms pipe conforming to is 1239/class ii of is 3589 including welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. 200 mm dia wall thickness 6.3 mm, supplying and fixing single headed internal hydrant valve with instantaneous gunmetal/stainless steel coupling of 63 mm dia with cast iron wheel isi marked conforming to is 5290 type a with blank gunmetal/stainless steel cap and chain as required.single headed gunmetal, supplying and fixing single headed external yard hydrant valve with 1 no. 63 mm dia instantaneous fm gunmetal/stainless steel coupling and cast iron wheel, isi marked, conforming to is 5290 type a with blank gunmetal/stainless steel cap and chain as required. single headed gunmetal, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required . 50mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .80 mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .100 mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .150 mm dia, supplying, fixing, testing and commissioning of butterfly valve of pn 1.6 rating with bronze/gunmetal seat duly isi marked complete with nuts, bolts, washers, gaskets conforming to is 13095 of following sizes as required .200 mm dia, supplying and fixing orifice plate made out of 6 mm thick stainless steel grade 304 with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required., providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 50mm dia, providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 80 mm dia, providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 100 mm dia, providing, installation, testing and commissioning of non return valve of following sizes confirming to is 5312 complete with rubber gasket, gi bolts, nuts, washers etc.as required. 150 mm dia., providing, installation, testing and commissioning of stainless steel y strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia holes with stainless steel flange. 80 mm dia, providing, installation, testing and commissioning of stainless steel y strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia holes with stainless steel flange.150 mm dia, providing, installation, testing and commissioning of stainless steel y strainer fabricated out of 1.6 mm thick stainless steel, grade 304, sheet with 3 mm dia holes with stainless steel flange. 200 mm dia, supplying and fixing 63 mm dia, 15 m long rrl hose pipe with 63 mm dia male and femalecouplings duly bound with gi wire, rivets etc. conforming to is 636 type a as required. gun metal, supplying and fixing first aid hose reel with ms construction spray painted in post office red,conforming to is 884 complete with the following as required. a 20 mm nominal internal dia water hose thermoplastic textile reinforced type 2 as per is 12585 b 20 mm nominal internal dia gun metal globe valve and nozzle. c drum and brackets for fixing the equipmets on wall. d connections from riser with 25 mm dia stop gun metal valve and m.s. pipe and socket. 30 mtrs, supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to is 903 suitable for instantaneous connection to interconnect hose pipe coupling as required. gun meta, supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd for suitable dia ms pipe connection conforming to is 904 as required. 2 way 100 mm dia m.s. pipe, supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd for suitable dia ms pipe connection conforming to is 904 as required. 4 way 150 mm dia m.s. pipe, providing, installation, testing and commissioning of c.i flanged swing type foot valve isi marked of following sizes confirming to is 4038 complete with all acessories complete etc as required.200 mm dia, supplying and fixing air vessel made of 250 mm dia, 8 mm thick ms sheet, 1200 mm in height with airrelease valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required., providing and fixing of pressure switch in m.s. pipe line including connection etc. as required., providing and fixing in position industrial type pressure gauge with gun metal / brass valves complete etc. as required., providing, fixing, testing and commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, ms pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required. 150 mm dia, supplying and fixing of hose cabinet of size 750x mm x 600 mm x 250 mm made of 2 mm thick ms sheet with 6 mm thick glazed glass doors i/c necessary locking arrangement suitable to accommodate external hydrant with butterfly valve , 2 nos . 15 mtr. long hose pipe, 1 no branch pipe, mounted on wall or raised brick platform and duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect , for external hydrant ,as required., cutting holes up to 15x15 cm in r.c.c. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1 2 4 1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size, including finishing complete so as to make it leak proof., sh iii cabling and other misc work control wiring required .providing of following sizes stranded aluminum conductor, xlpe insulated, pvc sheathed, 650 v/1100 v grade as per is 7098 part 1 1988. 4 core 16 sqmm, sh iii cabling and other misc work control wiring required .providing of following sizes stranded aluminum conductor, xlpe insulated, pvc sheathed, 650 v/1100 v grade as per is 7098 part 1 1988 . 3.5 core 25 sq. mm, sh iii cabling and other misc work control wiring required .providing of following sizes stranded aluminum conductor, xlpe insulated, pvc sheathed, 650 v/1100 v grade as per is 7098 part 1 1988. 3.5 core x 70 sq. mm, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. upto 35 sq. mm clamped with 1mm thick saddle, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. above 35 sq. mm and upto 95 sq. mm clamped with 25 mm and 3mm ms flat clamp., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required. above 185 sq. mm and upto 400 sq. mm clamped with 40mm and 3mm ms flat clamp, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on cable tray as required. upto 35 sq. mm clamped with 1mm thick saddle., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on cable tray as required.above 35 sq. mm and upto 95 sq. mm clamped with 25mm and 3mm ms flat clamp., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on cable tray as required.above 185 sq. mm and upto 400 sq. mm clamped with 40mm 3mm ms flat clamp, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required.upto 35 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required.mm above 35 sq. mm and upto 95 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required.above 185 sq. mm and upto 400 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal pipe as required. upto 35 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal pipe as required. above 35 sq. mm and upto 95 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/ hume/ metal pipe as required. above 185 sq. mm and upto 400 sq. mm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. above 185 sq. mm and upto 400 sq. mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required. 4 core 16 sq. mm size 28mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.3.5 core 25 sq. mm size 28mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.3.5 core 70 sq. mm size 38mm, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required.3.5 core 300 sq. mm size 70mm, supplying and laying of 2core 1.5 sqmm fire alarm armoured cable, 600/1000v rated with annealed copper conductor having xlpe insulation, steel wire armouring and frls/hffr outer sheath complete as required., supplying and installaton following size of perforated painted with powder coating m.s. cable trays with perforation not more than 17.5 percent, in convenient sections, joined with connectors, suspended from the ceiling with two numbers ms/gi suspenders including base of suitable size ms/gi angle, bolts and nuts, painting suspenders, fastener etc as required. 100 mm wide , 50 mm depth , 1.6 mm thickness, earthing with g.i. earth plate 600 mm length x 600 width and 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal / coke and salt as required., providing and fixing 25 mm wide and 5 mm thick g.i. strip in 40 mm dia g.i. pipe from earth electrode including connection with g.i. nut, bolt, spring, washer excavation and re filling etc. as required., providing and fixing 25 mm wide and 5 mm thick g.i. strip on surface or in recess for connections etc. as required., providing and fixing 6 swg dia g.i. wire on surface or in recess for loop earthing as required., providing and fixing following sizes g.i. pipes complete with g.i. fittings including trenching and refilling etc. 80 mm dia nominal bore
Agency / Dept :
bharat sanchar nigam limited BSNL
Due Date :
Oct 22, 2026 (20 days left)
Tender Value :
59.95L
View Documents
T18 Ref No : 17548504
Location : east khasi hills , meghalaya
Source : GEM Tenders
LIVE TENDER
tender for copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , towel rail (q3) , bathroom water shower (v2) (q3) , plastic seats and covers for water - closets as per is 2548 (q3) , towel ring (q3) , stainless steel sinks for domestic purposes (v3) as per is 13983 (q2) , plastic bib taps, pillar taps, angle valves & stop valves for hot & cold water services conforming to is 9763 (q3) , stainless steel shelf rack (q3) , ceramic ( vitreous china ) flushing cisterns for water closets and urinals conforming to is 774 (q3) , bathroom or toilet mirror (v3) (q4) , copper alloy gate valve for waterworks purpose (v2) conforming to is 778 (q3) , app based polymer membrance 1 mm thick , cp soap dish , stainless steel kitchen plate rack size 30inch x 36inch x 10inch , mirror looking 600 mmx450mm with frame , cp centre hole wash basin mixture hot and cold 15mm , stainless steel kitchen plate rack size 24inchx24inchx10inch , cp glass shelf 500 mm , flush strip 4inch x10 mtr , pvc float valve with rod and ball 20 mm , pvc rain gutter pipe 180 mm , pvc water storage tank 1000ltr , lakh dana for polish , pvc water storage tank 500ltr , pvc waste pipe 32mm , gi pipe 20 mm , gi union socket 20 mm , pvc connection pipe 15 mm x 600 mm with two nos coupling , glass putty , ms wire mesh 1mtr wide and 15 mtr long , frosted glass 4 mm thick 3ft x 4ft , synthetic enamelled paint white , gi pipe 15mm , pvc connection pipe 15x450mm , thinner for paint , window glass plain 4mm thick 3ft x 4ft , cp hanger 06 hook , pvc tank cover oblique lid suitable for 500 oblique 1000 ltrs tank , plywood commercial type bwr grade 8x4x18 oblique 19mm thick , synthetic enamel paint black colour , primer red oxide , aluminium floor door stopper , gi tee equal 20 mm , gi nipple 15x200mm , gi elbow 20mm , beading teakwood 4mm thick , chpara dry for polish , veneered decorative plywood 6mm thick with decorative face veneers on both faces 8ft x 4ft , gi socket 20mm , plywood commercial type is 303 bwr grade 7x3x12mm thick , gi elbow 15 mm dia , varnish , mdf board 8ft x 4ft x17mm , prelaminated particle board 6ftx3ftx18 oblique 19mm , gi nipple 20 mm x 150mm , gi tee reducing 15 x 20 mm , plywood one side natural teak face 4mm thick , gi tee equal 15 mm , aluminium curtain rod 20 mm dia , m seal , mdf board 8ft x 4ft x17 mm , sprit , gi nipple 15 x 50 mm long , dendrite adhesive , gi nipple 20 x 200 mm , gi nipple 15mm x 100 mm , fevicol , distemper white , taflon tape 12mm x 10 mtr , paint og green , gi nipple 15 x150mm , bracket for curtain rod 20mm , gi nipple 15mm x 225 mm , touch wood , pvc pipe 50mm dia , gi elbow 15mm x 20 mm reducer , white cement , gi nipple 15 x 75 mm , gi plain sheet 0.5mm , cane plastic 2 mm , bracket aluminium 25mm dia for curtain rod , bend pipe pvc 32mm dia for low level flushing cistern , gi socket reducing 20 x 25 mm , painting brush 75mm , blaze cloth green 1point 5 mtr width , red colour powder , nails 25mm , raw sienna powder yellow , nails 100mm , nails 75mm , coffee colour powder , synthetic enemelled paint grey , brown color powder polish , painting brush 50 mm , gi nipple 15 x 300 mm , nails 65mm , gi bend 15 mm , painting brush 25 mm, app based polymer membrance 1 mm thick, cp soap dish, stainless steel kitchen plate rack size 30inch x 36inch x 10inch, mirror looking 600 mmx450mm with frame, cp centre hole wash basin mixture hot and cold 15mm, stainless steel kitchen plate rack size 24inchx24inchx10inch, cp glass shelf 500 mm, flush strip 4inch x10 mtr, pvc float valve with rod and ball 20 mm, pvc rain gutter pipe 180 mm, pvc water storage tank 1000ltr, lakh dana for polish, pvc water storage tank 500ltr, pvc waste pipe 32mm, gi pipe 20 mm, gi union socket 20 mm, pvc connection pipe 15 mm x 600 mm with two nos coupling, glass putty, ms wire mesh 1mtr wide and 15 mtr long, frosted glass 4 mm thick 3ft x 4ft, synthetic enamelled paint white, gi pipe 15mm, pvc connection pipe 15x450mm, thinner for paint, window glass plain 4mm thick 3ft x 4ft, cp hanger 06 hook, pvc tank cover oblique lid suitable for 500 oblique 1000 ltrs tank, plywood commercial type bwr grade 8x4x18 oblique 19mm thick, synthetic enamel paint black colour, primer red oxide, aluminium floor door stopper, gi tee equal 20 mm, gi nipple 15x200mm, gi elbow 20mm, beading teakwood 4mm thick, chpara dry for polish, veneered decorative plywood 6mm thick with decorative face veneers on both faces 8ft x 4ft, gi socket 20mm, plywood commercial type is 303 bwr grade 7x3x12mm thick, gi elbow 15 mm dia, varnish, mdf board 8ft x 4ft x17mm, prelaminated particle board 6ftx3ftx18 oblique 19mm, gi nipple 20 mm x 150mm, gi tee reducing 15 x 20 mm, plywood one side natural teak face 4mm thick, gi tee equal 15 mm, aluminium curtain rod 20 mm dia, m seal, mdf board 8ft x 4ft x17 mm, sprit, gi nipple 15 x 50 mm long, dendrite adhesive, gi nipple 20 x 200 mm, gi nipple 15mm x 100 mm, fevicol, distemper white, taflon tape 12mm x 10 mtr, paint og green, gi nipple 15 x150mm, bracket for curtain rod 20mm, gi nipple 15mm x 225 mm, touch wood, pvc pipe 50mm dia, gi elbow 15mm x 20 mm reducer, white cement, gi nipple 15 x 75 mm, gi plain sheet 0.5mm, cane plastic 2 mm, bracket aluminium 25mm dia for curtain rod, bend pipe pvc 32mm dia for low level flushing cistern, gi socket reducing 20 x 25 mm, painting brush 75mm, blaze cloth green 1point 5 mtr width, red colour powder, nails 25mm, raw sienna powder yellow, nails 100mm, nails 75mm, coffee colour powder, synthetic enemelled paint grey, brown color powder polish, painting brush 50 mm, gi nipple 15 x 300 mm, nails 65mm, gi bend 15 mm, painting brush 25 mm
Agency / Dept :
indian army
Due Date :
Oct 10, 2026 (8 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17249075
Location : ernakulam , kerala
Source : GEM Tenders
corrigendum tender for steel equal angle 150x150x15x12000mm dnv gr. a
Agency / Dept :
cochin shipyard limited CSL
Due Date :
Sep 17, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Steel Equal Angle. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Steel Equal Angle sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Steel Equal Angle Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Steel Equal Angle, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Steel Equal Angle Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Steel Equal Angle Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Steel Equal Angle.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Steel Equal Angle depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Steel Equal Angle Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Steel Equal Angle bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Steel Equal Angle. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Steel Equal Angle, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Steel Equal Angle, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Steel Equal Angle?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Steel Equal Angle tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Steel Equal Angle?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Steel Equal Angle, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Steel Equal Angle is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All