sales@tender18.in| +917069661818
Register Now Free Trail
Register Now Free Trail
Search Tenders
Filters
Reset All
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source
Tender Type

140Latest Steel butt hinges Tenders List

Latest Steel butt hinges Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Steel butt hinges tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Steel butt hinges tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Steel butt hinges Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Steel butt hinges tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Steel butt hinges Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Steel butt hinges Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Steel butt hinges Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Steel butt hinges tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Steel butt hinges Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Steel butt hinges sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Steel butt hinges tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Steel butt hinges tenders.

Is EMD mandatory for all Steel butt hinges tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Steel butt hinges work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Steel butt hinges tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Steel butt hinges Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

T18 Ref No : 16210105
Location : gorakhpur , uttar pradesh
LIVE TENDER
tender for mild steel butt hinge size 50mm, type medium weight conforming to is: 1341/2018, amendment no. 1 & 2 with isi mark., mild steel butt hinge size 50mm, type medium weight conforming to is: 1341/2018, a mendment no. 1 & 2 with isi mark. - warranty period: 30 months after the date of delivery
Agency / Dept :
north eastern railway NER
Due Date :
Aug 10, 2026 (13 days left)
Tender Value :
0
View Documents
T18 Ref No : 16362542
Location : nagpur , maharashtra
LIVE TENDER
tender for 1)foot rest (fabricated) as per rdsodrg no.: wd-15009-s-13 alt 4 or latest, item no 27 for bvcm. 2)mild steel butt hinge heavy weight as per asrw drg. no. bvcm-962b & 965b, alt. 2 or latest (ref. drg. no. wd-15009-s-13, alt.4 or latest item-32)., mild steel butt hinge heavy weight as per asrw drg. no. bvcm-962b & 965b, alt. 2 or latest (ref. drg. no. wd-15009-s-13, alt.4 or latest item-32). - warranty period: 30 months after the date of del ivery pl code : 304100010385, pl code : 721507230160
Agency / Dept :
central railway CR
Due Date :
Aug 05, 2026 (8 days left)
Tender Value :
0
View Documents
T18 Ref No : 16259209
Location : diglipur , andaman and nicobar islands
Source : GEM Tenders
LIVE TENDER
tender for type 2 twinset quarter at ramnagar ordinary portland cement , ms wire nails , european type water closet wc pan p trap , pre painted galvanized iron roofing sheet , plain aluminium ridge sheet , exterior wall primer , exterior emulsion paint , wood primer , synthetic enamel paint weather resistant , paint thinner , aluminium sliding door bolt , aluminium tower bolt , aluminium door handle , aluminium casement window fastener , mild steel pressed butt hinges , pvc door frame thickness 5 mm , factory made solid pvc door shutter thickness 35 mm , window stay wind tie mild steel flat iron , aluminium l angle , aluminium t angle , galvanized iron pipe 2 inch medium or heavy class , galvanized iron pipe 1.5 inch medium or heavy class , galvanized iron pipe 1 inch medium or heavy class , ms angle cleat , gi level adjusting hanger , multipurpose cement fibre board 6 mm thickness , self-drilling screw, , hardened steel, corrosion-resistant , marine grade plywood , clear float glass pane 5.5 mm thickness , panel pins , ms square bar , single rubber door stopper , paint brush, type 2 twinset quarter at ramnagar, 43 grade, assorted sizes, with seat cover and fittings, 12 ft, width 500 to 600 mm, water based acrylic emulsion, weather resistant, high adhesion, high gloss finish, 1 litre bottle, size 300 x 16 mm, size 200 x 10 mm, size 100 x 10 mm, size 125 mm, size 100 mm, heavy duty type, size 125 x 65 x 2.12 mm, size 75 x 47 x 1.70 mm, 2500 x 800 mm, 40 mm x 6 mm, equal angle section, t section, 50 mm nominal bore, 40 mm nominal bore, 32 mm nominal bore, 40 mm x 40 mm x 6 mm thick, up to 1200 mm length, 4 x 4 feet, 4 inch length, 12 mm thickness, 30x30cm, 0.75 inch, 12mm x 12 mm, good quality, 4 inch size, 2 inch size
Agency / Dept :
ministry of forest environment and climate change MOEF
Due Date :
Aug 04, 2026 (7 days left)
Tender Value :
0
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16311364
Location : vemula , andhra pradesh
Source : GEM Tenders
LIVE TENDER
tender for earth work in excavation , filling available excavated earth excluding rock , position cement concrete , reinforced cementconcrete , foundations footings bases of columns etc , columns lintels beams plinth beams roofs etc , steel reinforcement , brick work with common fly ash bricks , structural steel work riveted , neat cement , painting with synthetic enamel paint , 15 mm cement plaster , 6mm cement plaster , water proofing material , premium acrylic emulsion paint , random rubble masonry , removal of damaged barbed wire fencing , water proofing treatment , rigid pvc rain water pipes , supplying and stacking , ms stays and clamps of 100 mm dia , drain cleaning including removal of muck , surface dressing of the ground , 12 mm cement plaster , removing white or colour wash , wall painting with acrylic emulsion paint , providing and applying white cement , finishing walls with acrylic smooth exterior paint , providing and applying plaster of paris putty , white washing with lime , providing and mixing water proofing material , demolishing stone rubble masonry , demolishing brick work , providing and injecting approved grout , providing and fixing glass panes 4 point 0 mm thick glass , providing and fixing glass panes 5 point 0 mm thick glass , providing and fixing glazing in aluminium door 4 point 0 mm thickness , providing and fixing glazing in aluminium door 5 point 0 mm thickness , 30 mm thick factory , providing and fixing factory made panel pvc door , providing and fixing aluminium work for doors , for shutters of doors windows , providing and fixing isi marked flush door shutters , providing and fixing brass 100mm , providing and fixing aluminium handles , providing and fixing aluminium sliding door , providing and fixing bright finished , providing and fixing ist quality ceramic glazed , providing and laying ceramic glazed floor , providing and fixing white vitreous china , providing and fixing water closet squatting , providing and fixing wash basin , providing and fixing ms holder , removal cleaning collection and stacking of wet dry muck , loading trasportation and unloading of the dried muck , fencing with angle iron post , providing and fixing gi chain link , removal of honey bee , cleaning of septic tank, ancillary civil maintenace works at tummalapalle plant and tailing pond area of ucil tummalapalle, earth work in excavation by mechanical means hydraulic excavator manual means over areas exceeding 30 cm in depth 1 point 5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth at all lead and lift as directed by engineer in charge in all kinds of soil, filling available excavated earth excluding rock in trenches and other areas as required in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering at all lead and lifts as per directions of engineer in charge, providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering at all levels as perdirections of engineer in charge with 1 isto 3 isto 6 1 cement 3 coarse sand 6 graded stoneaggregate 20 mm nominal size including compacting and curing as per specifications and directions of engineer in charge, providing and laying in position specified grade of reinforced cementconcrete excluding the cost of centering shuttering finishing andreinforcement at all levels as per directions of engineer in charge1 isto1 point 5 isto 3 1 cement 1 point 5 coarse sand 3 graded stoneaggregate 20 mm nominal size including compaction curing etc. complete as per directions of engineer in charge, centering and shuttering including strutting propping etc and removalof form as per directions of engineer in charge at all leads and lifta in foundations footings bases of columns etc a in foundations footings bases of columns etc, centering and shuttering including strutting, propping etc and removalof form as per directions of engineer in charge at all leads and lifta in foundations footings bases of columns etc b in superstructure columns lintels beams plinth beams roofs etc, steel reinforcement including straightening cutting bending placing in position and binding all complete at all leads and lift with thermo mechanically treated bars of grade fe 500d or more, brick work with common fly ash bricks of class of approved quality with designation 7 point 5 in cement mortar 1 isto 6 1 cement 6 coarse sand at all levels and lift as per directions of engineer in charge, structural steel work riveted bolted or welded in built up sections trusses and framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete, neat cement punning, painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade in two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per directions of eic, 15 mm cement plaster with mix 1 isto 6 1 cement 6 fine sand at all lead and lifts with polymer modified cement mortar including curing cost of all materials labour tools and tackles etc complete as per directions of engineer in charge, 6mm cement plaster of mix 1 isto 3 1 cement 3 fine sand, providing and mixing water proofing material in cement per bag of plaster work in proportion recommended by the manufacturers note per bag of 50 kg cement used in the mix, finishing walls with 100 percentage premium acrylic emulsion paint having voc less than 50 gm per litre and uv resistance as per is 15489 2004 alkali and fungal resistance dirt resistance exterior paint of required shade company depot tinted with silicon additive new work two or more coats applied 1 point 43 litre per 10 sqm over and including priming coat of exterior primer applied 0 point 90 litre per 10 sqm, random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1 isto 6 isto 12 1 cement 6 coarse sand 12graded stone aggregate 20 mm nominal size at all lead and lifts with cement mortar 1 isto 6 1 cement 6 coarse sand including cost of all materials, tools and tackles and labour etc complete as per directions of engineer in charge, removal of damaged barbed wire fencing and replacement with new barbed wire weighing 9 point 38 kg per 100m minimum fitted and fixed gi staples, turn buckles etc complete as per directions of engnieer in charge, grading roof for water proofing treatment with cement concrete 1 isto 2 isto 4 1 cement 2 coarse sand 4 graded stone aggregate 20mm nominal size, providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is 13592 type a including jointing with seal ring conforming to is 5382 leaving 10 mm gap for thermal expansion i single socketed pipes 110 mm diameter, supplying and stacking 53 mm to 22 point 4 mm size stone aggregate including cost of materials transportation loading and unloading taxes and royalty charges etc complete as per directions of engineer in charge, providing and fixing ms stays and clamps of 100 mm dia for pipes including necessary screws etc complete as per directions of engineer in charge, drain cleaning including removal of muck sludge solids rubbish etc from drains decant pond and other areas includng cost of all hire charges of machinery labour charges taxes insurance tools and tackles etc. complete as per directions of engineer in charge, surface dressing of the ground including removing vegetation and in equalities not exceeding 15 cm deep and disposal of rubbish lead up to 500m all kinds of soil up to all lead and lift including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, cement plaster with a floating coat of neat cement 12 mm cement plaster finished with a floating coat of neat cement of mix 1isto 4 1 cement 4 fine sand up to all lead and lift including cost of all materials labor tools and tackles taxes royalty charges etc complete as per latest edition of is code specifications and direction of engineer in charge, removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc complete including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, wall painting with acrylic emulsion paint having voc volatile organic compound content less than 50 grams per litre of approved brand and manufacture including applying additional coats wherever required to achieve even shade and colour. two coats including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete including cost of labor tools and tackles taxes etc complete as per direction of engineer inmcharge, finishing walls with acrylic smooth exterior paint of required shade old work one or more coat applied 0 point 90 ltr per 10 sqm including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, white washing with lime to give an even shade two or more coats including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and mixing water proofing material in proportion recommended by the manufacturers including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge note per bag of 50kg cement used in the mix, demolishing stone rubble masonry manually by mechanical means including stacking of serviceable material and disposal of unserviceable material within 3 kilometres lead in cement mortar up to all lead and lift including cost of all labor tools and tackles taxes etc complete as per latest edition of is code specifications and direction of engineer in charge, demolishing brick work manually by mechanical means including stacking of serviceable material and disposal of unserviceable material within 3 kilometres lead in cement mortar including cost of all labor tools and tackles taxes etc complete as per latest edition of is code specifications and direction of engineer in charge, providing and injecting approved grout in proportion recommended by the manufacturer into cracks honey comb area of concrete masonry by suitable gun pump at required pressure including cutting of nipples after curing etc stirrer mixed sbr polymer of approved make modified cement slurry made with shrinkage compensating cement in concrete rcc work including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing glass panes with putty and glazing clips in steel doors windows clerestory windows all complete with 4 point 0 mm thick glass panes including cost of labor tools and tackles taxes etc complete as per the architectural drawings including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing glass panes with putty and glazing clips in steel doors windows clerestory windows all complete with 5 point 0 mm thick glass panes including cost of labor tools and tackles taxes etc complete as per the architectural drawings and the directions of engineer in charge, providing and fixing glazing in aluminium door window ventilator shutters and partitions etc with epdm rubber neoprene gasket etc with float glass panes of 4 point 0 mm thickness weight not less than 10 kg per sqm including cost of labor tools and tackles taxes etc complete as per the architectural drawings and the directions of engineer in charge, providing and fixing glazing in aluminium door window ventilator shutters and partitions etc with epdm rubber neoprene gasket etc with float glass panes of 5 point 0 mm thickness weight not less than 10 kg per sqm including cost of labor tools and tackles taxes etc complete as per the architectural drawings and the directions of engineer in charge, 30 mm thick factory made polyvinyl chloride pvc door shutter made of styles and rails of a upvc hollow section of size 60x30 mm and wall thickness 2 mm pluse or minus 0 point 2 mm with inbuilt decorative moulding edging on one side the styles and rails mitred and joint at the corners by means of ms galvanised plastic brackets of size 75x220 mm having wall thickness 1 point 0 mm and stainless steel screws the styles of the shutter reinforced by inserting galvanised ms tube of size 25x20 mm and 1 mmpluse or minus 0 point 1 mm wall thickness the lock rail made up of h section a upvc hollow section of size 100x30 mm and 2 mm pluse or minus 0 point 2 mm wall thickness fixed to the shutter styles by means of plastic galvanised ms u cleats the shutter frame filled with a upvc multi chambered single panel of size not less than 620 mm having over all thickness of 20 mm and 1 mm pluse or minus 0 point 1 mm wall thickness the panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised ms rod and fastened with nuts and washers complete as per manufacturers specification including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing factory made panel pvc door shutter consisting of frame made out of ms tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top and bottom rails. ms frame shall have a coat of steel primers of approved make and manufacture ms frame covered with 5 mm thick heat moulded pvc c channel of size 30 mm thickness 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick 95 mm wide pvc sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide pvc sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. top bottom and lock rails shall be provided both side of the panel 10 mm 5 mm x 2 thick 20 mm wide cross pvc sheet be provided as gap insert for top rail and bottom rail paneling of 5 mm thick both side pvc sheet to be fitted in the ms frame welded sealed to the styles and rails with 7 mm 5 mm 2 mm thick x 15 mm wide pvc sheet beading on inner side and joined together with solvent cement adhesive an additional 5 mm thick pvc strip of 20 mm width is to be stuck on the interior side of the c channel using pvc solvent adhesive etc complete as per direction of engineer in charge manufacturers specification and drawing. 30 mm thick plain pvc door shutters including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing aluminium work for doors windows ventilators and partitions with extruded built up standard tubular sections appropriate z sections and other sections of approved make conforming to is 733 and is 1285 fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions ie at top bottom and sides with required epdm rubber neoprene gasket etc aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle aluminium snap beading for glazing paneling cp brass stainless steel screws all complete as per architectural drawings glazing paneling and dash fasteners to be paid for separately anodised aluminium anodised transparent or dyed to requied shade according to is 1868 minimum anodic coating of grade ac 15 including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, for shutters of doors windows ventilators including providing and fixing hinges pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber neoprene gasket required fittings anodised aluminium anodised transparent or dyed to required shade according to is 1868 minimum anodic coating of grade ac 15 including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing isi marked flush door shutters conforming to is 2202 part i decorative type core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 30 mm thick including isi marked stainless steel butt hinges with necessary screws including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing brass 100mm mortise latch and lock with 6 levers without pair of handles best make of approved quality for aluminium doors including necessary cutting and making good etc including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing aluminium handles isi marked anodised anodic coating not less than grade ac 10 as per is 1868 transparent or dyed to required colour or shade, with necessary screws etc including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing aluminium sliding door bolts isi marked anodised anodic coating not less than grade ac 10 as per is 1868 transparent or dyed to required colour or shade with nuts and screws etc complete of size 300x16 mm including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing ist quality ceramic glazed wall tiles conforming to is 15622 thickness to be specified by the manufacturer of approved make in all colours shades except burgundy bottle green black of any size as approved by engineer in charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1 isto 3 1 cement 3 coarse sand and jointing with grey cement slurry 3 point 3kg per sqm including pointing in white cement mixed with pigment of matching shade complete including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and laying ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer of 1st quality conforming to is 15622 of approved make in all colours shades except white ivory grey fume red brown laid on 20 mm thick bed of cement mortar1 isto 4 1 cement 4 coarse sand jointing with grey cement slurry 3 point 3kg per sqm including pointing the joints with white cement and matching pigments etc including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing white vitreous china pedestal type water closet european type wc pan with seat and lid 10 litre low level white pvc flushing cistern including flush pipe with manually controlled device handle lever conforming to is 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required wc pan with isi marked at all leads and lift including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing water closet squatting pan indian type wc pan with 100 mm sand cast iron p or s trap 10 litre low level white pvc flushing cistern including flush pipe with manually controlled device handle lever conforming to is 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required with white vitreous china orissa pattern wc pan of size580x440 mm with integral type foot rests including cost of all materials labour tools and tackles etc complete as per specifications and directions of engineer in charge, providing and fixing wash basin with ci brackets 15 mm cp brass pillar taps 32 mm cp brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require white vitreous china wash basin size 630x450 mm with 15 mm cp brass pillar taps of approved brand as per instructions including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing ms holder bat clamps of approved design to ci or sci rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1 isto 2 isto 4 mix 1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size and cost of cutting holes and making good the walls etc 100 mm diameter including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, removal cleaning collection and stacking of wet dry muck sludge from drains floors and others areas within a lead of 500m by manual means including cost of manpower tools and tackles etc up to all lead and lift including cost of all labor tools and tackles taxes etc complete as per direction of engineer in charge, loading trasportation and unloading of the dried muck obtained from item no 47 above upto a lead of 03 km including cost of transportation manpower tools and tackles etc complete as per directions of engineer in charge tare weight and gross weight of vehicle for each trip of disposal to be taken at ucils wigh bridge for payment 1 cum equal to1 point 6mt shall be taken for calculation purpose care should be taken to avoid any spillage on road up to all lead and lift including cost of all labor tools and tackles taxes etc complete as per direction of engineer in charge, fencing with angle iron post placed at required distance embedded in cement concrete blocks every 15th post last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires of barbed wire weighing 9 point 38 kg per 100 m minimum between the two posts fitted and fixed with gi staples turn buckles etc complete cost of posts struts earth work and concrete work to be paid for separately payment to be made per metre cost of total length of barbed wire used with gi barbed wire including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing gi chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts bolts and washers as required complete as per the direction of engineer in charge made of gi wire of dia 4 mm including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, removal of honey bee hives including cost of labor tools and tackles etc complete as per direction of engineer incharge, cleaning of septic tank of various of sludge including loading removal of spillage if any and unloading at a safe place of disposal and cleaning with water of spetic tank including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge
Agency / Dept :
uranium corporation of india limited UCIL
Due Date :
Aug 08, 2026 (11 days left)
Tender Value :
4486347.85
View Documents
T18 Ref No : 16344626
Location : jalpaiguri , west bengal
Source : GEM Tenders
LIVE TENDER
tender for lock stoppers as per is 1223 (q3) , wash basins - vitreous sanitary appliances (vitreous china) conforming to is 2556 (part 4) (q3) , steel butt hinges as per is 1341 (q3) , door handles (v2) isi marked to is 208 (q4) , wood screws (q3) , urinal pot , ewc vitreous china white , iwc 580x440 vitreous china white orissa , ms sliding door bolt 200mm , ms sliding door bolt 250mm , aluminium door handle 200mm , aluminium sliding door bolt 250mm , tower bolt aluminium 150mm , butt hinges aluminium 100 mm , steel handle for steel window l side , steel handle for steel window r side , alluminium door handle size 100mm , ms door handle 150mm , tower bolt aluminium 100mm , aluminium door handle 150mm , tower bolt aluminium 75 mm , tower bolt ms 200mm, urinal pot, ewc vitreous china white, iwc 580x440 vitreous china white orissa, ms sliding door bolt 200mm, ms sliding door bolt 250mm, aluminium door handle 200mm, aluminium sliding door bolt 250mm, tower bolt aluminium 150mm, butt hinges aluminium 100 mm, steel handle for steel window l side, steel handle for steel window r side, alluminium door handle size 100mm, ms door handle 150mm, tower bolt aluminium 100mm, aluminium door handle 150mm, tower bolt aluminium 75 mm, tower bolt ms 200mm
Agency / Dept :
indian army
Due Date :
Jul 30, 2026 (2 days left)
Tender Value :
0
View Documents
T18 Ref No : 16344851
Location : khordha , odisha
Source : GEM Tenders
LIVE TENDER
tender for provision of maintenace stores - led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , led bulkhead light (q3) , led batten light (led tube light) (v2) (q2) , self ballasted led lamps (led bulb) (v3) conforming to is 16102 (part 2) (under bis scheme - ii) (q2) , plasticized pvc tapes with non-thermosetting adhesive for electrical purpose (v2) isi marked to is 7809 (part 3/ sec1) (q2) , elecric bells and accessories as per is 2268 (q3) , xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , non modular piano type domestic electrical switches isi marked to is 3854 (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , electrical plugs (v2) isi marked to is 1293 (q2) , alum ferric gde-i , soda ash , alum crystal , led tube rod , xlpe cable , chlorine gas , mcb 63amps tpn , fan regulator , copper sulphate , copper cable , condenser , condenser 4 mfd , switch socket , al service cable , angle holder , aluminium lugs , bipin holder , insulation tap , looking mirror , aluminium wire mesh , ss bracket , galvanised iron pipe , helical door spring , mild steel butt hinges , water tank , plywood bwr grade , galvanised iron tee , galvanised iron elbow , mild steel screw , mild steel butt hinges , gi socket , gi nipple , white cement , m seal compound , ms hack saw blade , ms nail , plastic washer , particle board , seat for chair cb steel , back for chair cb steel , back for chair cb steel , ply wood grade bwr , french polish , pvc shoe for chair easy , pvc shoe for chair varandah , handle for almirah , synthetic enemal paint , dendrite adhesive pidilite , metal pegs brass , brush for painting , chandras , synthetic wood fevicol , knob for drawer , cloth malmal , colour polish , putty for wood , thinner for paint , spirit denatured , hack saw blade , sand paper , ms nails, alum ferric gde-i, soda ash, alum crystal, 18 or 20 watt led tube rod, xlpe cable 185 sqmm 3 core 11000 v, chlorine gas, mcb 63amps tpn, fan regulator electronic socket type, copper sulphate, copper cable of 4sqmm, condenser 2.5 or 2 mfd, copper cable of 2.5sqmm, condenser 4 mfd, switch socket 05 amps, copper cable of 1.5sqmm, switch socket 16 amps, al service cable 2 core 10 sqmm, angle holder, aluminium lugs for 185 sq mm cable, bipin holder for t or l, aluminium lugs 95 sq mm cable, aluminium lugs for 120 sq mm cable, aluminium lugs for 50 sq mm cable, aluminium lugs 16 sq mm cable, aluminium lugs for 10 sq mm cable, aluminium lugs 25 sq mm, insulation tap 10m long, looking mirror 450 x 600 x 6mm thick, aluminium wire mesh, ss bracket for curtain rod 20mm, galvanised iron pipe 20mm, black painted helical door spring 154 mm long, mild steel butt hinges 100mm, galvanised iron pipe 15mm, pvc cover for water tank capacity 2000 to 5000 ltrs, plywood 6mm thick bwr grade size 8 ft x 4 fft, galvanised iron tee reducer 20 x 15, galvanised iron elbow reducing 20x15mm, mild steel screw 75mm, galvanised iron tee 15mm, mild steel butt hinges 75mm, galvanised iron elbow 15mm, mild steel screw 20mm, mild steel screw 25mm, gi socket 15mm dia, mild steel screw 30mm, gi nipple 15mm dia, white cement, m seal compound, ms hack saw blade best quality, ms nail 1 or 2 inch size, plastic washer 20mm for fc, ms nail 2 inch size, ms nail 1 inch size, plywood 12mm thick bwr grade size 7 ft x 3 ft, particle board 18mm thick commercial over which 1.5mm thick plastic laminated sheet shall, seat for chair cb steel with arms, seat for chair cb steel without arms, back for chair cb steel with arms, back for chair cb steel without arms, ply wood grade bwr type bb 12 mm thick commercial, french polish in pack of 1 ltr, pvc shoe for chair easy chair dining, chair writing, pvc shoe for chair varandah, handle for almirah steel chromium plate, synthetic enemal paint black in 1 ltr container, synthetic enemal paint new olive green in 1 ltr container, synthetic enemal paint post office red or white in 1 ltr container, dendrite adhesive pidilite in 1 kg pack all as specified, metal pegs brass 120mm x 75mm all as specified, brush for painting 75 mm wide, chandras, synthetic resin adhesive for wood fevicol or pedilite all as specified, knob for drawer, cloth malmal, brush for painting 50 mm wide, colour polish for wooden furniture 100 gms of each pack, putty for wood, thinner for paint in 1 ltr pack, spirit denatured, hack saw blade 12 inch long, sand paper 80 or 60 grade, ms nails of any size as ordered all as specified
Agency / Dept :
indian army
Due Date :
Jul 30, 2026 (2 days left)
Tender Value :
2751977
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16357950
Location : pune , maharashtra
Source : GEM Tenders
LIVE TENDER
tender for copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , copper alloy gate valve for waterworks purpose (v2) conforming to is 778 (q3) , tower bolts (ferrous metals) as per is 204 (q3) , (vitreous china) - washdown water closets as per is 2556 (q3) , enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 (q3) , steel butt hinges as per is 1341 (q3) , hasps and staples as per is 363 (q3) , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2)
Agency / Dept :
indian army
Due Date :
Aug 03, 2026 (6 days left)
Tender Value :
0
View Documents
T18 Ref No : 16295579
Location : chandigarh , chandigarh
Source : GEM Tenders
LIVE TENDER
tender for cp towel rack tower bolts (non-ferrous metals) v2 as per is 204 (q2) , pvc insulated copper cable single core and multi core circular sheathed with rigid conductor (v2) isi marked to is 694 (q2) , kitchen sink stainless steel 1040x510mm with drainage board , pvc int fitting for flushing cistern , cp towel rack , cp liquid soap dispenser , cp head for stop cock concealed , cp waste coupling 32mm dia , cp waste coupling 40mm dia , flush pipe 32x800mm , seat cover plastic for ewc white colour heavy duty , gate valve 15 mm , gate valve 20 mm , reducer elbow heavy duty 20x15mm , gi nipple 15x150mm 6 inch , gi nipple 15x100mm 4 inch , gi nipple 15x75mm 3 inch , gi nipple 15x50mm 2 inch , gi nipple 20x150mm 6 inch , gi nipple 20x100mm 4 inch , gi nipple 20x75mm 3 inch , gi nipple 20x25mm , gi socket 20mm , gi tee heavy duty 20mm , gi tee heavy duty 15mm , gi socket reducing 20x15mm , gi socket reducing 20x25mm , gi union 20mm 3or4 inch , gi union 15mm 1 or 2 inch , gi elbow 15mm , gi elbow 20mm , gi tee 15mm , gi socket 15mm , gi reducer elbow 20x15mm , reducer tee 20x15mm , gi hexa nipple 20 mm , gi hexa nipple 15 mm , gi nipple 15x50mm , pvc connection pipe 15 x 450mm , pvc connection pipe 15 x 600 mm , pvc connection pipe 15 x 750 mm , pvc waste pipe 32 mm dia 800mm long heavy duty for whb , pvc waste pipe 40 mm dia 800 mm long heavy duty , brass float valve 20 mm with adjustable rod and pvc ball , cp towel ring , cp toilet paper holder , gi plug 15 mm , cp soap dish , cp grating 100mm , reducer tee 20x15mm , gi nipple 20mm x100mm , tank nipple 15 mm , tank nipple 20 mm , ss nipple 15x15mm , brass spindle 15mm , ms sliding bolt 200mm , al sliding bolt 200mm , ms sliding bolt 250mm , al sliding bolt 250mm , brass door hinges 150 mm , brass door stopper 5 inch , brass sliding bolt 300 mm with nut and bolt , brass tower bolt 200 x 42 x 18 mm , ss butt hinge 100mm , ss butt hinge 125mm , ss butt hinge 75mm , al butt hinge 100mm , ms tower bolt 150mm , ms tower bolt 200mm , ms door handle 150mm , al door handle 100mm d shape , al door handle 150mm d shape , al door handle 125mm d shape , hasp staple , helical door spring , floor spring for aluminium door , door seal rubber 2 inch wide , oil putty for glass pane , white cement , centre lock or mortice lock with handle , centre lock or mortice lock without handle , m seal , pvc pipe 110 mm , pvc pipe 200mm, kitchen sink stainless steel 1040x510mm with drainage board, pvc int fitting for flushing cistern, cp towel rack, cp liquid soap dispenser, cp head for stop cock concealed, cp waste coupling 32mm dia, cp waste coupling 40mm dia, flush pipe 32x800mm, seat cover plastic for ewc white colour heavy duty, gate valve 15 mm, gate valve 20 mm, reducer elbow heavy duty 20x15mm, gi nipple 15x150mm 6 inch, gi nipple 15x100mm 4 inch, gi nipple 15x75mm 3 inch, gi nipple 15x50mm 2 inch, gi nipple 20x150mm 6 inch, gi nipple 20x100mm 4 inch, gi nipple 20x75mm 3 inch, gi nipple 20x25mm, gi socket 20mm, gi tee heavy duty 20mm, gi tee heavy duty 15mm, gi socket reducing 20x15mm, gi socket reducing 20x25mm, gi union 20mm 3or4 inch, gi union 15mm 1 or 2 inch, gi elbow 15mm, gi elbow 20mm, gi tee 15mm, gi socket 15mm, gi reducer elbow 20x15mm, reducer tee 20x15mm, gi hexa nipple 20 mm, gi hexa nipple 15 mm, gi nipple 15x50mm, pvc connection pipe 15 x 450mm, pvc connection pipe 15 x 600 mm, pvc connection pipe 15 x 750 mm, pvc waste pipe 32 mm dia 800mm long heavy duty for whb, pvc waste pipe 40 mm dia 800 mm long heavy duty, brass float valve 20 mm with adjustable rod and pvc ball, cp towel ring, cp toilet paper holder, gi plug 15 mm, cp soap dish, cp grating 100mm, reducer tee 20x15mm, gi nipple 20mm x100mm, tank nipple 15 mm, tank nipple 20 mm, ss nipple 15x15mm, brass spindle 15mm, ms sliding bolt 200mm, al sliding bolt 200mm, ms sliding bolt 250mm, al sliding bolt 250mm, brass door hinges 150 mm, brass door stopper 5 inch, brass sliding bolt 300 mm with nut and bolt, brass tower bolt 200 x 42 x 18 mm, ss butt hinge 100mm, ss butt hinge 125mm, ss butt hinge 75mm, al butt hinge 100mm, ms tower bolt 150mm, ms tower bolt 200mm, ms door handle 150mm, al door handle 100mm d shape, al door handle 150mm d shape, al door handle 125mm d shape, hasp staple, helical door spring, floor spring for aluminium door, door seal rubber 2 inch wide, oil putty for glass pane, white cement, centre lock or mortice lock with handle, centre lock or mortice lock without handle, m seal, pvc pipe 110 mm, pvc pipe 200mm
Agency / Dept :
indian army
Due Date :
Jul 27, 2026
Tender Value :
3163400
View Documents
T18 Ref No : 16260112
Location : ernakulam , kerala
Source : GEM Tenders
LIVE TENDER
tender for 25k53c001 n5306 001045 , n5320 000260 , n5306 000958 , n5306 001019 , n5310 000761 , n5330 006266 , n0265 4233489 , n5306 059676 , n0266 0000390 , n5315 000805 , n0413 r012020 , n5306 000902 , n5306 000929 , n5306 000989 , n5306 002437 , n5340 000977 , n5306 000384 , n5306 000420 , n5315 000523 , n0265 5340969 , n5306 000867 , n5306 000936 , n5306 057236 , n0214 r010686 , n3110 000380 , n3110 p063937 , n3110 p063987 , n3130 000856 , n3110 000142 , n5306 000904 , n0257 0012271 , n5306 000853 , n5306 000881 , n0248 0001477 , n0214 r010704 , n0251 r010287 , n0251r010288 , n0265 p003301 , n5306 000782 , n0413 9709257 , n0461 0000982 , n5310 006430 , n5315 000522 , n5315 000668 , n5340 000890 , n5306 000459 , n5306 000813 , n5306 000856 , n5306 000931 , n5306 002438 , n5315 000666 , n5340 000904 , n5340 000967 , n5350 000008 , n3439 p009719 , n0214 r010717 , n0265 0000081, steel bolt and nut m27x100, rivets snap head allum 10 x 26 mm, bolt with nut 20x60mm, bolt metric black steel hexhd with hex nut 24x100mm, bolt brass nut nb for bolt 7 8 thrd 0 875 ht 0 750x19mm, packing graphited, pad lock, ht al bronze bolt with nut size m16x50, hand cuffs large, nail steel rose hd fine flat 50mm, neoprene rubber sht 5mm 3 16 width 1mtr, bolt with nut m16x40 mm, bolts black steel hex hd m18x50 mm with nut, bolts black steel hex hd m22x75 mm with nut, bolt hex hd naval brass 1 2 bswx2 1 2 long, padlock 4 lever 2 brass, bolt bsw blck steel hex hd unm c with hexnut face3 16x1 1 2, bolt bsw black steel hexagon head size 3 8 x5 long, nail steel 1 4x15mm, padlock, bolt with nuts block steel 12x130 mm, bolts black steel hex hd m18x90 mm with nut, ht bolt nut full thread size dia 24x110x2 5mm, bolt and nut 6x25, bearing 6316 equivalent, ball bearing 6314 zz c3, ball bearing 6308 zz c3, bearing skf 6310 zz, bearing 6312, bolt with nut 16x50 mm, pop rivets tap p 429 bs 20, bolts black steel hex hd m12x35 mm with nut, bolts black steel hex hd m14x60 mm with nut, chest steel 6 lever lock 21 3 4x18 1 2x11 1 2, gi bolt and nut 10x35mm, hasp stapples 2 alluminium, hasp stapples 3 alluminium, pad lock navtel 6 lever, bolt with nut black steel hexm6x55 mm long, arl mounting 150lbs, cloth emery 3 0, washer flat rd chamfered 45deg on one facenom dia1 2 out sid, nail steel 1 25x12mm, nail steel 75mm, hasp stapples ms 100mm, bolt steel 5 8x2 1 4, bolts black steel hex hd m8x40 mm with nut, bolt steel m12x50mm, bolt metric black steel hex head unmachined with hexnut fa, bolt hexhd naval brass 5 8 bswx2 long, nail steel wire round chequerd head 150mmx6 3mm, hinge st butt 65mm, padlock iron galv 4 levers with male keys 40mm, cloth emery, welding electrode 48xn4 3 15mm dia 350mm length, gi bolt and nut 12x50mm, pad locks iron galvanised 65mm 21 2
Agency / Dept :
indian navy
Due Date :
Aug 04, 2026 (7 days left)
Tender Value :
0
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16383971
Location : pune , maharashtra
Source : GEM Tenders
LIVE TENDER
corrigendum tender for steel pipes for water and sewage as per is 3589 (q3) , wood screws (q3) , tower bolts (ferrous metals) as per is 204 (q3) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , buzzer switch. (q3) , plywood , float valve , curtain , pegset , union , elbow , mixer spindle , bend , tank nipple , brush , socket , tee , pvc flot , door , socket reducer , hasp and stapple , knob , bolt , hinges , tank , handle , gi tank , screw wood , nipple , tubing , plug , elbow , painting , pvc washer , alumn door , bracket cp , union , nipple , hacksaw blade , stainless steel , tee , putty , gi tee , tape , holder , white , dispenser, procurement of maint store, ply wood commercial bwr 12mm thick 8 feet x4 feet, ply wood bwr one side t f size 6mm thick 8 feet x4 feet, float valve pvc 25mm complete, cp curtain rod 20mm, cp pegset 5 hooks, gi union 20mm dia, gi union 15mm dia, gi elbow 20mm, mixer spindle with cap 15mm with handle, gi bend 20mm, gi tank nipple 15mm, brush painting 50mm, float valve pvc 15mm complete, gi socket 25mm, gi elbow 25mm, gi tee reducings 25x15x25mm, pvc flot valve 20mm with complete set, hydraulic door closure, gi socket reducer 25x20mm, hasp and stapple aluminum 100mm, gi socket reducer 20x15mm, cupboard knob 40mm, gi bend 15mm, tower bolt aluminum 150mm, butt hinges ms 75mm, gi elbow 15mm, gi tank nipple 20mm, gi socket reducer 25x15mm, gi socket 15mm, tower bolt aluminium 100mm, gi socket 20mm, tower bolt aluminium 200mm, tower bolt aluminium 150mm, gi tee equal 15mm, gi tee equal 20mm, butt hinges ms 100mm, bow handle aluminum 100mm, gi tank nipple 15mm 4 inch, screw wood steel 50 mm, gi nipple 20x100mm long, gi nipple 20x75mm long, gi tubing 25 mm, gi nipple 25x75mm long, gi plug 15mm, gi elbow red 25x20mm, bow handle aluminum 150mm, brush painting 100mm, gi nipple 50 x 20 mm, gi nipple 25 x 20 mm, gi nipple 20 x 50mm long, screw wood steel 25mm x 8mm, pvc washer for 15mm consealed stop cock, gi elbow red 25 x 15mm, gi plug 20mm, alumn door stopper 140 mm long, bracket cp curtain rod 20 mm fancy type, gi union 25 mm, gi nipple 15x50mm long, hacksaw blade 1/2 inch x12 inch best quality, stainless steel grating 100mm dia with hole, gi tee equal 25mm, oil putty glazed, brush painting 25mm, gi tee reducer 20 x 15 mm, gi nipple 150 x 20 mm, taplon tape, paper holder for bathroom, ewc white with cover, soap dispenser
Agency / Dept :
indian army
Due Date :
Jul 27, 2026
Tender Value :
0
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Steel Butt Hinges. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Steel Butt Hinges sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Steel Butt Hinges Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Steel Butt Hinges, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Steel Butt Hinges Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Steel Butt Hinges Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Steel Butt Hinges.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Steel Butt Hinges depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Steel Butt Hinges Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Steel Butt Hinges bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Steel Butt Hinges. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Steel Butt Hinges, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Steel Butt Hinges, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Steel Butt Hinges?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Steel Butt Hinges tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Steel Butt Hinges?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Steel Butt Hinges, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Steel Butt Hinges is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All