sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

33Latest Rolling machine Tenders List

Latest Rolling machine Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Rolling machine tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Rolling machine tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Rolling machine Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Rolling machine tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Rolling machine Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Rolling machine Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Rolling machine Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Rolling machine tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Rolling machine Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Rolling machine sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Rolling machine tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Rolling machine tenders.

Is EMD mandatory for all Rolling machine tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Rolling machine work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Rolling machine tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Rolling machine Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

T18 Ref No : 16647629
Location : mumbai , maharashtra
NEW TENDER
auction or scrap of hausler rolling machine (located at alcock yard old workshop)
Agency / Dept :
mazagon dock shipbuilders limited MDL
Due Date :
Aug 18, 2026 (9 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16639060
Location : vemula , andhra pradesh
Source : GEM Tenders
NEW TENDER
tender for bitumenlayingwork2 , kerbstonelayingwork1 , tailingexcavationwork1 , borrowearthsoilwork3 , removinghdpeliningwork1 , dismantlingstonepitching1 , backfillingoftailing1 , laboratorytestwork15 , humepipework1 , humepipework2 , humepipework3 , humepipework4 , humepipework5 , humepipework6 , earthworkfillingforbund1 , stonepitchingwork5 , brickwork1 , brickwork2 , plasteringwork1 , plasteringwork2 , plasteringwork3 , paitingwork1 , paitingwork2 , paitingwork3 , handrailingwork3 , ccforflooringwork1 , plasteringwork4 , glasssstripswork1 , cementpunning1 , aluminumwork1 , shutterworks1 , glasspaneswork1 , siliconsealantwork1 , doorworks1 , mechanicalinstallationpumps1 , mechanicalinstallationpipes1 , mechanicalinstallationpipes2 , mechanicalinstallationpipes3 , electricallinstallation5 , mechanicalerections1 , disposalareappep1 , slimedisposalareappep1 , slimedisposalareappep2 , constructionofelectricalfacilityworklumpsum1 , panelneartaillingpond , automaticpowerfactorcorrectionpanel1 , batterychargerdcboard , lcsmushroomheadstay1 , lcsmushroomheadstay2 , lcsmushroomheadstay3 , distributiontransformer1 , dieselgeneratorset1 , dieselgeneratorfounation1 , ltbusduct1 , htswitchgearincomingpanel1 , htswitchgearincomingpanel2 , mainlightingdistributionboard1 , sublightingdistributionboard , highmastlighting1 , highmastlighting2 , lighteningfixture1 , ltpowercables1 , htpowercables1 , htpowercables2 , ltcontrolcables , junctionboxes1 , earthinglightningitems1 , aircondition1 ,, construction of 4th stage tailing pond, stripping and clearing the site of jungles, bushes, shrubs, wood etc., uprooting of rank vegetation, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level, removal of undesirable materials etc. including removal and disposal of debris at suitable locations with all leads and lifts, as decided by the engineer-in-charge., felling trees of girth (measured at a height of 1m above ground level) including cutting of trunks and branches, removing the roots and stacking of servicable material and disposal of unserviceable material at suitable ocations as decided by the engineer-in-charge. beyond 30 cm girth upto and including 60 cm girth, felling trees of girth (measured at a height of 1m above ground level) including cutting of trunks and branches, removing the roots and stacking of servicable material and disposal of unserviceable material at suitable ocations as decided by the engineer-in-charge. beyond 60 cm girth upto and including 120 cm girth, felling trees of girth (measured at a height of 1m above ground level) including cutting of trunks and branches, removing the roots and stacking of servicable material and disposal of unserviceable material at suitable ocations as decided by the engineer-in-charge. beyond 120 cm girth upto and including 240 cm girth, earth work in excavation in development of embankment profile in the following types of soils for all lifts, including taking adequate protection during excavation, drilling and transporting the excavated spoil / material after stripping of top soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. all kinds of soils including hard and dense soils, earth work in excavation in development of embankment profile in the following types of soils for all lifts, including taking adequate protection during excavation, drilling and transporting the excavated spoil / material after stripping of top soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. ordinary rock, earth work in excavation in development of embankment profile in the following types of soils for all lifts, including taking adequate protection during excavation, drilling and transporting the excavated spoil / material after stripping of top soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond.hard rock (blasting prohibited), earth work in excavation of hillocks within existing pond area in the following types of soils for all lifts, transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead and lift within acquired area of tailing dam & pond. all kinds of soils including hard and dense soils, earth work in excavation of hillocks within existing pond area in the following types of soils for all lifts, transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead and lift within acquired area of tailing dam & pond. ordinary rock, earth work in excavation of hillocks within existing pond area in the following types of soils for all lifts, transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead and lift within acquired area of tailing dam & pond. hard rock (blasting prohibited), earth work in excavation in bed layer -1 in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, transporting the excavated soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of the engineer-in-charge for any lead within acquired area of tailing dam & pond. all kinds of soils including hard and dense soils, earth work in excavation in bed layer -1 in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, transporting the excavated soil as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of the engineer-in-charge for any lead within acquired area of tailing dam & pond. ordinary rock, earth work in excavation in pipe-support foundations, peripheral drains, culverts, diversion drain, watch towers, miscellaneous equipment foundations etc. in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, drilling and transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. all kinds of soils including hard and dense soils, earth work in excavation in pipe-support foundations, peripheral drains, culverts, diversion drain, watch towers, miscellaneous equipment foundations etc. in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, drilling and transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. ordinary rock, earth work in excavation in pipe-support foundations, peripheral drains, culverts, diversion drain, watch towers, miscellaneous equipment foundations etc. in the following types of soils for all lifts, including bailing / pumping out any water accumulating inside the excavation, taking adequate protection during excavation, drilling and transporting the excavated spoil / material as per specification to the designated area / places, stacking of usable and disposal of excess of unusable material all complete as per drawing, specification and direction of engineer for any lead within acquired area of tailing dam & pond. hard rock (blasting prohibited), supplying and transporting earth of specified quality (as per specification and drawing) from borrow-pit i.e. the source not owned by ucil but arranged by the contractor at his own cost including all taxes, royalty etc and filling the same in bed later - 1 in layers not exceeding 250 mm above existing ground level, watering of each layer in the stipulated manner as per specification and / or direction of the engineer-in-charge and compaction by mechanical means to achieve required degree of compaction as per specification, all complete as per drawing, specification and direction of the engineer-in-charge., supplying and transporting earth of specified quality (as per specification and drawing) from borrow-pit i.e. the source not owned by ucil but arranged by the contractor at his own cost including all taxes, royalty etc and filling the same in embankment in random fill zone in layers not exceeding 250 mm in proper profile to various heights above existing ground level, watering of each layer in the stipulated manner as per specification and / or direction of the engineer-in-charge and compaction by mechanical means to acheive required degree of compaction as per specification, disposal of excess of unusable material all complete as per drawing, specification and direction of the engineer-in-charge for any lead and lift (sectional measurement for compacted filling will only be paid)., supplying and transporting clay of specified quality and property (as per specification and drawing) from borrow-pit i.e. the source not owned by ucil but arranged by the contractor at his own cost including all taxes, royalty etc and laying the same over random fill on upstream side of embankment in layers not exceeding 150 mm measured loose in proper profile, watering of each layer in stipulated manner to various heights and compacting each layer by mechanical means to achieve required degree of compaction as per specification and / or direction of the engineer-in-charge, all complete as per drawing, specification and direction of the engineer-in-charge for any lead and lift (sectional measurement for compacted thickness will only be paid)., supplying, transporting and laying stone pitching with approved stone (average 300 mm thick) over clay lining on upstream side of dam with voids filler with stone dust with all lead and lift including cutwork, curing, scaffolding with all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge. note - payment shall be made for the actual area of coverage of stone pitching. wastage shall not be payable., supplying, transporting and laying stone pitching with approved stone (average 300 mm thick) over random fill on downstream side of dam with voids filler with stone dust with all lead and lift including cutwork, curing, scaffolding with all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge. note payment shall be made for the actual area of coverage of stone pitching. wastage shall not be payable., supplying, transporting, spreading and compacting sand (average 100 mm thick) over stone pitching on upstream side of dam with all lead and lift including all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge., supplying, transporting and laying 1500 micron thick high density polyethelene (hdpe) sheet (textured on both sides) as lining over sand cushion layer on upstream side of dam, laid in position by qualified and skilled installer certified by the manufacturer and approved by the engineer-in-charge, with all lead and lift including sealing of joints (hot wedge single and dual track seaming and / or extrusion fillet seaming method or any other specialized method e.g. robotic two stitch welding etc.) of new sheets and sealing of new lining sheet with existing lining sheet with an overlap of approximately 1.0m, anchoring the new lining sheet on top of new embankment, maintaining quality control, conducting tests as per requirement of the specification, all complete as per drawing, provisions of specification and direction of the engineer-in-charge. note payment shall be made for the actual area of coverage of hdpe lining sheet. overlapping area, wastage etc. shall not be payable., supplying, transporting, laying and compacting uniformly graded stone aggregate filters within new embankment at all levels,incl shuttering, tools tackles all complete as per drawing, specification and direction of the engineer-in-charge., supplying, transporting, laying and compacting uniformly graded coarse sand filters within new embankment at all levels incl shuttering, tools tackles all complete as per drawing, specification and direction of the engineer-in-charge. (sand shall conform to is383). laying and compacting rock-fill toe dam on downstream side of embankment with following materials at all levels, all complete as per drawing, specification and direction of the engineer-in-charge., with rocks arranged by the contractor at his own cost (rate to include supply and transport also), earth work in back-filling including watering, ramming and compaction at all elevation around pipe support foundations, drain trenches etc. as per specifications and drawings and as directed by the engineer-in-charge with selected soils obtained from stacks under item no. 6 above for any lead within acquired area of tailing pond and dam. (filling shall be done in layers not exceeding 250 mm in loose thickness and watered as necessary. each layer of filling to be compacted to acheive a dry density of not less than 95% of the proctor density)., supplying, transporting and laying stone pitching with approved stone (average 300 mm thick) in diversion drain and at outfall locations with interstices between adjacent stones filled-in with stones of proper size well-driven in order to ensure tight packing and complete filling of all interstices so that no chip can be removed by hand, with all lead and lift including cutwork, curing, scaffolding with all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge. note payment shall be made for the actual area of coverage of stone pitching. wastage shall not be payable., earthwork in filling using earth obtained from item nos. 3, 4, 5 and 6 above in construction of embankment of access roads (total four nos. access roads) connecting top of new tailing pond embankment in layers not exceeding 250 mm in proper profile to various heights above existing ground level, watering of each layer in the stipulated manner as per specification and / or direction of the engineer-in-charge and compaction by mechanical means to acheive required degree of compaction as per specification, all complete as per drawing, specification and direction of the engineer-in-charge for any lead and lift (sectional measurement for compacted filling will only be paid)., supplying, transporting and laying stone pitching with approved stone (average 300 mm thick) on sides of embankments of access roads with voids filler with stone dust with all lead and lift including cutwork, curing, scaffolding with all bye-work, all complete as per drawing, specification and direction of the engineer-in-charge., supplying site machine batched plain cement concrete of 136 nominal mix (1 cement 3 coarse sand 6 graded stone aggregate with 20 mm and down aggregates) below foundations, walls, drains, pits etc. including mixing, transporting, placing in position, compacting to proper thickness and level, curirg, maintaining proper quality control including cost of admixtures in recommended proportions as per is 9103 to accelerate/retard setting of concrete, improve workability without impairing strength and durability but excluding cost of shuttering work, all complete as per specifications, drawings and direction of the engineer-in-charge and including cost of form work., extra over item 30 bove for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying. note (i) cost of shuttering and reinforcement shall be paid in respective items. (note the bidder has to quote only extra cost above the item 30 in the line item of 31, for example- if the cost of item 30 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 31 of the price part), providing, mixing, laying in position in substructure upto plinth level, site machine batched design mix cement concrete for all types of reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, cement, admixtures in recommended proportionsas per is 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength, including speading, laying, compacting to proper size/thickness and level, curing, maintaing proper quality control, carriage for all leads, trial mix and laboratory testing but excluding the cost of centering, shuttering, finishing and reinforcement as per drawings, specification and direction of the enginner-in-charge, for the following grades of concrete concrete of m25 grade with minimum cement content of 330 kg/cum, providing, mixing, laying in position in substructure upto plinth level, site machine batched design mix cement concrete for all types of reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, cement, admixtures in recommended proportionsas per is 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength, including speading, laying, compacting to proper size/thickness and level, curing, maintaing proper quality control, carriage for all leads, trial mix and laboratory testing but excluding the cost of centering, shuttering, finishing and reinforcement as per drawings, specification and direction of the enginner-in-charge, for the following grades of concrete concrete of m30 grade with minimum cement content of 350 kg/cum, extra over item 32 above for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying. concrete of m25 grade with minimum cement content of 330 kg/cum (note the bidder has to quote only extra cost above the item 32 in the line item of 34, for example- if the cost of item 32 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 34 of the price part), extra over item 33 above for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying.concrete of m30 grade with minimum cement content of 350 kg/cum. (note the bidder has to quote only extra cost above the item 33 in the line item of 35, for example- if the cost of item 33 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 35 of the price part), providing, mixing, laying in position in superstructure above plinth level, site machine batched design mix cement concrete for all types of reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, cement, admixtures in recommended proportionsas per is 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength, including speading, laying, compacting to proper size/thickness and level, curing, maintaing proper quality control, carriage for all leads, trial mix and laboratory testing but excluding the cost of centering, shuttering, finishing and reinforcement as per drawings, specification and direction of the enginner-in-charge, for the following grades of concrete concrete of m25 grade with minimum cement content of 330 kg/cum, providing, mixing, laying in position in superstructure above plinth level, site machine batched design mix cement concrete for all types of reinforced cement concrete work, using coarse aggregate and fine aggregate derived from natural sources, cement, admixtures in recommended proportionsas per is 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength, including speading, laying, compacting to proper size/thickness and level, curing, maintaing proper quality control, carriage for all leads, trial mix and laboratory testing but excluding the cost of centering, shuttering, finishing and reinforcement as per drawings, specification and direction of the enginner-in-charge, for the following grades of concrete concrete of m30 grade with minimum cement content of 350 kg/cum, extra over item 36 above for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying. concrete of m25 grade with minimum cement content of 330 kg/cum (note the bidder has to quote only extra cost above the item 36 in the line item of 38, for example- if the cost of item 36 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 38 of the price part), extra over item 37 above for using ready mixed concrete (rmc) manufactured in fully automated batching plant and transported to site of work in transit mixer for all leads, having continuous agitator mixer including pumping of concrete from transit mixer to site of laying. concrete of m30 grade with minimum cement content of 350 kg/cum (note the bidder has to quote only extra cost above the item 37 in the line item of 39, for example- if the cost of item 37 i.e normal mix is rs. 3000 and cost of rmc mix is rs.3500 then the bidder has to quote only the extra cost amount i.e rs.500 (3500-3000) in the line item 39 of the price part) (another note-2 for item nos. 23, 24, 25 and 26 (i) excess cement, if required in design mix, with respect to the minimum cement content mentioned above, shall be paid under respective item. (ii) cost of shuttering and reinforcement shall be paid through respective items.(iii) rendering of treatment at construction joint shall be carried out under supervision of manufacturer, cost of which shall be included in rate of these items. (iv) design of pipe support foundations, high mast foundations, miscellaneous pump foundations, transformer and other equipment foundations shall be under scope of the contractor. (v) contractor shall prepare design drawings and bar bending schedules for all rcc structures and submit the same to ucil for approval., supplying and laying precast reinforced cement concrete elements at any level using 20 mm and down graded crushed stones as coarse aggregate as per approved design mix including supply of materials / labour / tools and tackles etc. as required, formwork, mixing, laying, compacting to proper size and thickness, curing, storing, handling, transporting, erection without damage etc. but excluding cost of shuttering and reinforcement, all complete as per drawings, specifications and direction of the engineer-in-charge. concrete of m25 grade with minimum cement content of 330 kg/cum note (i) excess cement, if required in design mix, with respect to the minimum cement content mentioned above, shall be paid under respective item. (ii) cost of shuttering and reinforcement shall be paid in respective items., add for consumption of extra / excess cement, if required, in design mix concrete (item no. 23 to 26 above) over the specified minimum cement content in respective items mentioned above. note i) requirement of extra cement with respect to the minimum cement content mentioned against respective items of approved design mix of concrete to achieve the characteristic strength for each design mix must be approved by engineer-in-charge during mix design stage based on laboratory test results which must also be approved by the engineer-in-charge..(ii) payment shall be on the basis of actual quantity of cement used in mix concrete executed., supplying, installing, dismantling and removing shuttering for foundations and substructures upto plinth level in all kinds of rcc work for all leads and lifts including necessary rendering of concrete surfaces after exposure, maintaining proper quality control, supervision etc., all complete as per drawings, specification and direction of engineer-in-charge. notes for the above item nos. i) the design of formwork/staging shall be submitted by the contractor to ucil for approval before commencement of work., supplying, installing, dismantling and removing shuttering for superstructures above plinth level in all kinds of rcc work for all leads and lifts including necessary rendering of concrete surfaces after exposure, maintaining proper quality control, supervision etc., all completer as per drawings, specification and direction of engineer-in-charge. notes for the above item nos. i) the design of formwork/staging shall be submitted by the contractor to ucil for approval before commencement of work., supplying, straightening, cutting, bending, binding with 2 nos. 20 gauge annealed soft iron wire and placing in position following types of reinforcement, of all diameters to all types of rcc members in substructure upto plinth level including all lifts and leads, maintaining proper quality control, supervision, provision of necessary chairs/spacers, tying and bending of dowel bars, cover blocks of same grade of concrete, preparation of bar bending schedule and getting the same approved from ucil before construction, all complete as per drawings, specification and direction of the engineer-in-charge. thermo-mechanically treated (tmt) bars of grade fe-500d conforming to is1786. note for above items. i) the supply of fe 500d tmt bars conforming to is 1786 (latest) shall be fromm/s sail, iisco, rinl, tata steel and jindal from their own plants rolled from virgin material only.ii) reinforcement steel bars from rerollers of the above manufacturers will not be accepted iii) no extra payment shall be made on account of rolling margin and wastage iv) contractor shall supply copies of the documentary evidence of purchase of steel, test certificates from these manufacturers (steel either directly purchased or through their dealers)and also tests from third party, if required, to be arranged at no extra cost.v) welding weights, weight of binding wires etc. shall not be measured for payment but the cost of the same shall be deemed to have been included in the quoted rate.vi) chairs and spacers provided will not be paid extra.vii) preparation of bar bending schedule for reinforcement in all types of rcc structures will be prepared by the contractor and submitted to ucil for approval., supplying, straightening, cutting, bending, binding with 2 nos. 20 gauge annealed soft iron wire and placing in position following types of reinforcement, of all diameters to all types of rcc members in superstructure above plinth level including all lifts and leads, maintaining proper quality control, supervision, provision of necessary chairs/spacers, tying and bending of dowel bars, cover blocks of same grade of concrete, preparation of bar bending schedule and getting the same approved from ucil before construction, all complete as per drawings, specification and direction of the engineer-in-charge. thermo-mechanically treated (tmt) bars of grade fe-500d conforming to is1786. note for above items. i) the supply of fe 500d tmt bars conforming to is 1786 (latest) shall be fromm/s sail, iisco, rinl, tata steel and jindal from their own plants rolled from virgin material only.ii) reinforcement steel bars from rerollers of the above manufacturers will not be accepted iii) no extra payment shall be made on account of rolling margin and wastage iv) contractor shall supply copies of the documentary evidence of purchase of steel, test certificates from these manufacturers (steel either directly purchased or through their dealers)and also tests from third party, if required, to be arranged at no extra cost.v) welding weights, weight of binding wires etc. shall not be measured for payment but the cost of the same shall be deemed to have been included in the quoted rate.vi) chairs and spacers provided will not be paid extra.vii) preparation of bar bending schedule for reinforcement in all types of rcc structures will be prepared by the contractor and submitted to ucil for approval., supplying, fabricating and installing mild steel anchor bolts / holding down bolts, pipes, sleeves, inserts, hangers, conduits and any other mild steel, cast iron, g.i.cast steel and other fixures including lugs in cement concrete, including necessary templates for keeping them in position and with welding, bending to the required shape, if necessary and prime coat and final painting whereever necessary/applicable, cost of scaffolding, as required, at all leads and lifts, storing, handling, transporting, erection without damage, placing in position, maintaining proper quality control etc. all complete as per drawings, specification and direction of engineer-in-charge. note i) all materials shall be from m/s sail, iisco, rinl and tata steel from their own plants rolled from virgin material only. ii) welding weights, connections, bolts and nuts etc. shall not be measured for payment but the cost of which shall be deemed to have been included in the quoted rate. iii) contractor shall supply copies of the documentary evidence of purchase of steel, test certificates from these manufacturers and also tests from third party, if required, to be arranged at no extra cost. iv) all holes will be made by drilling only. gas cutting of holes will not be permitted. v) electrodes manufactured by m/s advani oerlikon, esab india, indian oxygen and dandh secheron only shall be used., taking delivery from ucil, handling, transporting and installing in cement concrete at all elevations anchor bolts, anchors, pipes, sleeves, inserts, hangers, conduits and any other mild steel, cast iron, g.i.cast steel and other fixures, cost of scaffolding, as required, placing in position, maintaining proper quality control etc. all complete as per drawings, specification and direction of engineer-in-charge.. note i) the fabricated embedded items including lugs etc. shall be supplied by ucil., supplying, fabricating and installing structural steel work conforming to is 2062 (grade e250, quality b0) in all kinds of work for pipe and cable supports at top of dam/embankment at all elevations including straightening of raw steel (if required), cutting, making edge preparation, making connections at fabrication yard by welding / bolting, hoisting, fixing in position by welding / bolting, cleaning and preparation of all steel, storing, loading, transportation, unloading, delivery at erection site, maintening proper quality control, surface preparation for painting, erection, alignment and connections of all structures true to line, level, plumb and dimension including rectification, if any, splicing, applying a primer coat of approved make before erection and two coats of final paint of approved make after erection and final alignment, preparation of design drawings, fab
Agency / Dept :
uranium corporation of india limited UCIL
Due Date :
Aug 26, 2026 (17 days left)
Tender Value :
172Cr
View Documents
T18 Ref No : 16551923
Location : chittoor , andhra pradesh
LIVE TENDER
auction or scrape of plant & machinery, plant and; machinery comprising of automatic rolling mill strips, oil fired furness, eot crane 3 nos., leth machine etc. as well as industrial sheds of size 120'x350', 40'x80' and 60'x120'
Agency / Dept :
private company
Due Date :
Aug 12, 2026 (3 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16449783
Location : mumbai , maharashtra
Source : GEM Tenders
LIVE TENDER
tender for white or black phenyl 5 ltr , floor cleaner 5 ltr , hand wash 1 ltr , acid 5 ltr , bath soap , bleaching powder , cleaning powder , soft broom phool jhadu , hard broom , shaving foam or cream , room freshener , shaving brush , shaving razor , rubber wiper , lock 6 lever , lock 7 lever , razor blade , battery medium size , battery big size , torch 3 cell , torch 2 or 4 cell , nylon scrubber , button cell , bathroom floor brush , toilet brush , drain brush mori brush , naphthalene balls , pesticide spray pump , slippers , match box , pencil cell aa , gas lighter , plastic bucket 16 ltr , plastic bucket 5 ltr , plastic mug , sewing machine needle , white thread , green thread , lace , white flat lace or nadi , measuring tape , stainless steel thermos 1 ltr , stainless steel thermos 2 ltr , stainless steel water jug , tea cup andsaucer set , plastic drum with lid , bobbin case , door mat , candle , led bulb 60w equivalent , led bulb 15w , watchman stick , nylon rope , sewing machine bobbin case , sewing machine bobbin , pencil cell aaa , ceiling mop with stick , lock 5 lever , clip mop with stick , white chalk , assorted colour chalk , supadi , dustbin with lid 15 ltr , laxman rekha chalk , wiper with long stick , cloth duster , floor duster , knife 18 inch , tea strainer big , tea strainer small , flour sieve 19 cm , bathroom cleaner , toilet freshener cube , dustbin 60 ltr , dustbin 12 ltr , dish wash powder , floor wiper , steel scrubber , plastic food cover , plastic storage container 15 ltr , tea kettle 7 ltr , tea thermos 1 ltr , gas lighter 1.5 feet , wooden rolling pin belan , potato peeler , coconut grater , coconut scraper , large floor mop , detergent powder , sewing machine oil , glass cleaner spray , toilet cleaner , small glass wiper , small handle wiper , dish wash liquid , dry mop , box file , notebook 200 pages big , calculator , pen blue , red pen , pencil , glue liquid gum , stapler small , stapler pin small , two hole punch , machine small , file spring , stamp pad red andblue , ink bottle blue andred , ucommon pin , torch , scale big , eraser , sharpener , camlin paste 300 ml , stapler big , common pin , highlighter , writing paper pad , marker pen , white tag , red tag , two hole punch machine big , color flags , brown envelopes l , brown envelopes s , paper ream 75 gsm , upin , two side rack file phutta , notebook 400 pages big , carbon paper , two side flap file , 59 register cooper , stapler pin big , small notebook 200 pages , cello tape , paper clips , tailor scissor , hole punches 6 mm double hole punch , heavy duty paper punch , rubber band stretchable, as per specification
Agency / Dept :
department of health and family welfare DOHAFW
Due Date :
Aug 11, 2026 (2 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16499481
Location : bangalore , karnataka
Source : GEM Tenders
LIVE TENDER
tender for removal of existing bituminous concrete layer , removal of existing synthetic astro turf surface , providing and laying bituminous concrete as per fih guidelines , removing and refixing of existing drain cover after relaying of hockey turf , earth work in excavation by mechanical or manual means in trenches or drains , providing and laying in position cement concrete of aggregate 40 mm , providing and laying in position cement concrete of aggregate 20 mm , steel work welded in built up sections or framed work , applying priming coat with ready mixed red oxide zinc chromate primer , painting with synthetic enamel paint , providing and fixing gi chain link fabric fencing of required width , supply and installation of fully computerized automatic and single key operation , supply, installation, testing and commissioning of 500 w led flood lights , supply, installation, testing and commissioning feeder pillar control panel , supply and installation of fih approved synthetic turf of green colour , supply installation testing and commissioning of dug out min 10 seating cap , supply and fixing of aluminium goal post for hockey , vendor to provide fih certification for global category , transportation charges of materials both removal and installation till site, re laying of existing astro turf hockey ground, removal of the existing bituminous concrete layer by milling machine to correct the ground gradient as per latest fih guidelines and removal of unserviceable materials from the site as per direction of tech rep or project officer including all costs loading and unloading carriage by mechanical means etc complete please refer to specification attached at appendix a ser no 1, removal of the existing synthetic hockey surface with rubber shock pad and disposal of the old unserviceable synthetic material including all costs loading and unloading carriage by mechanical means etc complete please refer to specification attached at appendix a ser no 2, providing and laying bituminous concrete strictly as per fih guidelines under the supervision of turf manufacturer representative or engineer using crushed stone aggregates of specified grading premixed with bituminous binder and filler transporting the hot mix to work site by tippers laying with paver finisher equipped with electronic sensor to the required grade alignment and level by special lazer equipment and rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction and density as per specification complete and as per the direction of tech rep or project officer 50 mm compacted thickness with bitumen of grade vg 30 at the rate 5 point 5 percent by weight of total mix and lime filler at the rate of 3 percent by weight of aggregate prepared in batch type hot mix plant of 100 to 120 tph capacity please refer to specification attached at appendix a ser no 3, removing of existing drain cover and refixing after relaying of hockey turf including cleaning and minor repair work of drainage system as per direction of tech rep or project officer 12 mm cement plaster of mix 1 ratio 4 with 1 cement ratio 4 fine sand please refer to specification attached at appendix a ser no 4, earth work in excavation by mechanical means hydraulic excavator or manual means in foundation trenches or drains not exceeding 1 point 5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto to 1 point 5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m all kinds of soil please refer to specification attached at appendix a ser no 5, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level 1 ratio 4 ratio 8 with 1 cement ratio 4 coarse sand ratio 8 graded stone aggregate 40 mm nominal size please refer to specification attached at appendix a ser no 6, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level 1 ratio 2 ratio 4 with 1 cement ratio 2 coarse sand ratio 4 graded stone aggregate 20 mm nominal size please refer to specification attached at appendix a ser no 7, steel work welded in built up sections or framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer using structural steel etc as required in grating frames guard bar ladder railings brackets gates and similar works please refer to specification attached at appendix a ser no 8, applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron or steel works please refer to specification attached at appendix a ser no 9, painting with synthetic enamel paint of approved brand and manufacture to give an even shade with two or more coats on new work please refer to specification attached at appendix a ser no 10, providing and fixing gi chain link fabric fencing of required width in mesh size 50 mm x 50 mm with height upto 6 m behind the goal posts and 2 point 5 m along the sides including strengthening with 2 mm dia wire or nuts bolts and washers as required complete as per the direction of tech rep or project officer made of gi wire of dia 4 mm please refer to specification attached at appendix a ser no 11, supply and installation of fully computerized automatic and single key operation with 6 pop up sprinkler system having a radius of 41 m at 6 bar pressure discharge of water specifically designed for synthetic sports hockey surface including all their fittings and accessories including earth work in excavation and re filling hdpe pipe dia 150 or 110 mm class pe 100 grade 12 point 50 kg per sqm minimum including all charges etc complete please refer to specification attached at appendix a ser no 12, supply installation testing and commissioning of 500 watts led flood lights wipro or bajaj or crompton or any equivalent brand with 12 lights x 4 nos on existing poles all as complete as required to fix lights on these poles please refer to specification attached at appendix a ser no 13, supply installation testing and commissioning of feeder pillar time control panel 3 ph with 16 amps mcb and amp power contactor installation of 12 light fixtures interlink connection cable for lights up to control panel please refer to specification attached at appendix a ser no 14, supply and installation of fih approved global category synthetic turf of pile height 13 mm alongwith cast in situ shock pad of minimum 15 mm thickness on prepared bituminous surface maintaining international hockey federation fih specification including all marking on the surface complete as per the instruction of tech rep or project officer the work shall be executed by an fih certified field builder and colour of the turf will be green please refer to specification attached at appendix a ser no 15, supply installation testing and commissioning of dug out with minimum 10 seating capacity of ss 304 and covering with polycarbonate sheets of approved shade with special turf wheels for movements etc as per directions of tech rep or project officer please refer to specification attached at appendix a ser no 16, supplying and fixing of aluminium goal post for hockey as per drawing design and specifications approved by fih including all fittings and net etc all complete as per direction of the tech rep or project officer please refer to specification attached at appendix a ser no 17, vendor to provide fih certification for global category for the project after completion of all wks please refer to specification attached at appendix a ser no 18 payment will be released after confirmation is received from fih certification authority, transportation charges of materials till site for deliveries and removal of debris from site out side the cantt premises please refer to specification attached at appendix a ser no 19
Agency / Dept :
indian army
Due Date :
Sep 02, 2026 (24 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16376342
Location : itanagar , arunachal pradesh
Source : GEM Tenders
LIVE TENDER
tender for full broom , stick broom , a4 size paper , black and red hit , colin , note sheet a3 size as per our format 100 pages , white board marker , spider net , cartridge 88aand 12aand 110a , laserjet mfp m436nda , steplar h45and h10 , scissor , white tap big , pen , strick note , naphthalene , toilet brush , basin brush , pencil , garbage beg medium 20 ltr , room freshener , odonil , whitener , mopper , wiper , single punch machine , stock register as per our format 100 pages , dustbin , register rolling 100 pages, stationary and cleaning items, as per specification
Agency / Dept :
national institute of technology NIT
Due Date :
Aug 13, 2026 (4 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16514617
Location : jammu , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for stepmill , cross trainer , exercise cycle , leg extension and curl machine , olympic flat bench press , adjustable bench , abdominal crunch machine , smith machine , functional trainer , dumbbell stand , t-bar row machine , back extension machine , hip abductor and adductor machine , 45-degree leg press machine , olympic barbell rack , rubberised dumbbells 10 kg , rubberised dumbbells 12.5 kg , rubberised dumbbells 15 kg , rubberised dumbbells 17.5 kg , rubberised dumbbells 22.5 kg , rubberised dumbbells 30 kg , rubberised dumbbells 35 kg , rubberised weight plate 5 kg , rubberised weight plate 7.5 kg , rubberised weight plate 10 kg , rubberised weight plate 15 kg , barbell rod curl 3 ft , barbell rod straight 3 ft , barbell rod straight 5 ft , barbell rod straight 7 ft , foam roller , medicine ball , triceps rope cable attachment , straight bar cable attachment , weight locking pin , v grip cable attachment, procurement of various gym equipment, (i) drive system- magnetic ems system for smooth and silent operation (ii) console- led dot matrix display providing clear visibility of workout metrics (iii) handle bar controls- integrated speed and start and stop buttons for convenient adjustments during exercise level, calories, time, distance, steps, etc. (iv) workout programs- multiple motivating programs catering to various fitness goals. (v) data readout- display speed level, calories burn, time, distance, and steps to monitor performance (vi) additional features- equipped with water bottle holder for hydration during workouts (vi) maximum user weight- 160kg, accommodating a wide range of users (vii) dimension- length- 145cm, width- 82 and height- 208 cm ensuring a compact footprint for commercial settings, (i) resistance levels- opt for machines offering at least 40 resistance levels to accommodate a wide range of workout intensities. (ii) stride length- a stride length of 19 inch to 22 inch ensures a natural and comfortable motion suitable for users of varying heights. (iii) flywheel weight- a heavier flywheel, such as 10kg to 14.2 kg, provides smoother and more stable movement (iv) power source- consider self-generating models to reduce electricity usage and allow placement flexibility (v) console features- look for a 15.6 inch tft touch screen with wi-fi connectivity, offering interactive programs and entertainment options (vi) connectivity options- ensure the machine includes bluetooth connectivity, speakers, and mobile phone holders for user convenience (vii) maximum user weight- a capacity of up to 180kg indicates a robust and durable construction suitable for commercial use (viii) dimensions- a footprint of approximately 217cm (l) x 71cm (w) x 163cm (h) ensures stability and accommodates various user sizes, (i) type- commercial grade upright or magnetic exercise cycle suitable for heavy-duty gym use. (ii) frame material- heavy duty steel frame with powder coated anti-rush finish. (iii) resistance system- magnetic resistance system with minimum 8 resistance levels and smooth operations. (iv) drive mechanism- belt driven system for noiseless and low maintenance performance. (v) flywheel- precision balanced flywheel pf minimum 8 kg for stable cycling motion. (vi) display console- led display showing time, speed, distance, calories and pulse. (vii) user capacity- minimum user weight capacity of 120 kg or above. (viii) seat and pedals- adjustable cushioned seat with anti-skid pedals and foot straps., (i) frame construction- heavy duty 11-gauge steel tubing with powder coated finish for durability and stability (ii) seat and backrest- adjustable backrest and seat angle to align the user knee with machine pivot for optimal biomechanics (iii) adjustment features- high density foam rollers and sweat resistant pu leather pads for comfort and long term use (iv) padding and upholstery- high-density foam padding with sweat-resistant, anti-tear pu leather covering for user comfort and longevity. (v) weight stack- comes with a reflectorized weight stack, steel weight with magnetic selector pin (100-120kg) (vi) range of motion- engineered cam system for consistent resistance and smooth leg extension as well as leg curl across full motion path., (i) frame construction- made from heavy duty 11-gauge steel (3 mm thick), rectangular or oval tubing (usually 50 x 100 mm) powder coated finish for rust, sweat and scratch resistance. (ii) bench platform- fixed flat bench with ipf - standard height (42-45 cm from floor). high-density foam padding covered in anti - microbial sweat - resistant pu leather. (iii) barbell holders- dual height bar catches for easy re-racking, made of steel with uhmw inserts to protect bar knurling. distance between uprights should be 110-120 cm, suitable for standard olympic bars. (iv) spotter platform- integrated rear platform or elevated standing area for spotters (on premium models). provided stability and safety during heavy lifts. (v) safety armsor spotter catches adjustable sporting arms or crash bars available in some models for added safety. protect lifter in case of failed rep. (vi) weight plate storage- 4-6 integrated olympic plate storage pegs (50 mm) with rubber stops for silent racking. pegs are evenly spaced for balance and easy access. (vii) dimensions- length- 160 - 180 cm , width - 120 - 140 cm, height - 120 - 140 cm (viii) stability features- wide base and rubber feet ensure no wobble during heavy pressing. (ix) max weight capacity- rated to withstand 500- 700 kg including user plus barbell weight. should be suitable for advanced lifters and competitive training., (i) construction and frame- built with 11-gauge steel (3 mm thick), using rectangularor oval tubing (usually 50x 100 mm), powder coated finish for rust, sweat and scratch resistance (ii) backrest adjustability- 7 to 9 positions from decline (-10 degree) to upright (85 degrees), laser cut or pin locking ladder system for secure angle transitions (iii) seat adjustability- 2-3 adjustable positions to prevent sliding during incline presses, quick pop pin or ladder lock mechanism (iv) padding- high density foam padding covered with sweat-resistant pu leather, dual stitched seams for durability and comfort (v) weight capacity- supports 400-500kg (including user and weight), ideal for heavy dumbbell work or barbell workout (vi) mobility- rear support wheels and front handle grip for easy movement, rubber feet ensure stability and protect floors (vii) footprint- length- - 120 - 130 cm, width- - 55 - 60 cm, height- - 45 cm (viii) backrest width- optimal width around 28-30 cm to allow full scapular movement during presses, (i) type- commercial grade abdominal crunch machine suitable for institutional and gym use. (ii) frame material- heavy-duty steel frame with powder coated anti-rust finish. (iii) weight stack- minimum 60-80 kg weight stack with safety selector pin arrangement. (iv) seat and padding- high-density foam seat and backrest with durable sweat resistant upholstery. (v) adjustment mechanism- adjustable seat and arm position for different user heights. (vi) cable and pulley system- heavy duty nylon coated cables with precision pulley system for smooth movement. (vii) grip handles- ergonomic anti-slip handles for comfortable and secure grip. (viii) user capacity- minimum user weight capacity of 120 kg or above., (i) frame and construction- built with 11-gauge heavy duty steel frame with 50 x 100 mm oval tubing, coated with electrostatic powder finish for rust, sweat, and corrosion resistance (ii) guide rod system- stainless steel linear guide rods (25-30mm dia.) with ultra-smooth linear bearings for frictionless barbell movement, allows vertical movement only, improving safety and targeting muscles precisely (iii) barbell specifications- integrated olympic bar (20kg) with knurled grip zones, rated to handle 300-350kg of weight, chrome plated finish for durability (iv) safety features- sprig loaded safety stoppers at multiple heights for secure reracking, twist rock mechanism to lockorunlock bar instantly with wrist rotation (v) weight plate storage- 4-6 olympic plate holders (50 mm dia.), rear mounted for convenience and space efficiency, rubber bumpers to reduce noise and protect plates. (vi) dimensions- length 210 cm, width 130 cm, height 230 cm, designed to fit most commercial gym spaces (vii) user capacity and usage- max user weight + load 400-450 kg, suitable for squats, presses, lunges shrugs, and rows with guided control and stability (ix) accessories and add-ons- comes with j- hooks, barbell locks and rubberized foot stabilizers for floor grip and equipment balance, (i) frame construction- heavy duty 11-gauge steel tubing with powder coated finish for durability and stability (ii) pulley system- dual pulleys with 180-degree swivel range, uses high tensile, nylon coated cables for smooth and quiet operation (iii) weight stacks- dual selectorized weight stacks 100-120 kg each steel weight with magnetic selector pin (100-120kg) allowing independent or simultaneous use (iv) adjustability- multiple vertical pulleys positions (15-20 height levels) to allow a wide range of motion and exercise variety (v) attachments and accessories- must have accessories like d-handles, straight bar, ankle strap and pull-up bar integrated into the frame with rubber grip, (i) dimensions (l x w x h)- 175 x 81 x 92 cm (ii) pipe size- 100 x 50 x 2.5 mm (iii) paint finish- electrostatic powder coating for durability and corrosion resistance (iv) design- three tier design to accommodate multiple pairs of dumbbells efficiently, (i) type- commercial grade plate loaded t-bar row machine without weight plates. (ii) frame material- heavy duty steel frame with powder coated anti-rust finish. (i) construction- robust and stable structure suitable for heavy-duty institutional gym use. (iv) handle design- multi-grip ergonomic handles with anti-slip coating for comfortable grip. (v) weight loading system- compatible with standard olympic plates. (vi) movement mechanism- smooth pivot movement with high strength bearing system. (vii) user capacity- minimum user weight capacity of 120 kg or above., (i) type- commercial grade back extension machine suitable for institutional gym use. (ii) frame material- heavy-duty steel frame with powder coated anti-rust finish. (iii) padding and upholstery- high-density foam padding with durable sweat resistant upholstery. (iv) adjustment mechanism- adjustable thigh pad and support positions for different user heights. (v) foot support- anti-skid foot platform with secure leg support arrangement. (vi) construction- stable and heavy duty design for continuous commercial usage. (vii) grip handles- ergonomic anti-slip handles for safe and comfortable exercise. (viii) user capacity- minimum user capacity of 120 kg and above., (i) frame construction- heavy duty 11-gauge steel tubing with powder coated finish for durability and stability (ii) dual functionality- single machine allows both hip abduction and adduction exercises via simple position adjustment (iii) adjustable start position- multiple start positions and range settings to accommodate user flexibility and control exercise intensity (iv) padding and comfort- high density foam thigh pads and seat with sweat resistant, tear proof upholstery for maximum comfort during inneror outer thigh movement (v) weight system- standard 100kg to 120 kg steel weight with magnetic selector pin, shielded stack for safety and noise reduction (vi) ergonomic design- seated posture with back support and aligned pivot points ensures proper biomechanics and muscle isolation, (i) frame construction- 11-gauge commercial-grade steel frame with 50 x 100 mm oval tubing, finished with electrostatic powder coating to prevent rust and surface damage (ii) press angle options- 45-degree incline sled style for natural movement and joint alignment (iii) weight capacity- plated loaded design with olympic sleeves, max load capacity- 400-450 kg built for powerlifters and athletes (iv) footplate design- extra-large non slip steel foot platform (approx. 70-85 cm wide) for multiple foot positions, may include angle adjustment for varied muscle targeting (v) seat and back support- ergonomically angled backrest with sweat-resistant, double stitched pu leather upholstery, seat adjustment track for optimal knee and hip alignment during pressing (vi) sled movement- multiple safety lockout positions to prevent overextension or injury, option for manual foot stop for quick disengage. movement (vii) dimensions (approx.)- length- 200-220 cm, width- 130-150 cm, height- 140-160 cm, designed to accommodate users from 5 feet to 6 feet and 6 inches. (viii) additional features- integrated weight plate storage horns, rubber foot stabilizers to protect gym flooring, maintenance free bushings and sealed bearings for longevity, (i) frame and material- built with 11-gauge steel (3 mm thick), using rectangularor oval tubing (usually 50x 100 mm), heavy duty welded frame for maximum rigidity, powder coated finish for rust, sweat and scratch resistance (ii) design type- vertical barbell rack, can hold 8-10 olympic barbells depending on model (iii) bar holders- 50mm dia. sleeves with rubberized inserts to protect bar knurling and reduce noise (iv) weight capacity- each holder supports bars weighing up tp 20-25 kg safely, overall rack capacity often exceeds 200kg (v) dimensions- length and height vary by model but typically compact to fit gym spaces efficiently, base equipped with rubber feet for floor protection and stability, (i) core material- solid cast iron core for durability and consistent weight (ii) rubber coating- thick high quality non-marking rubber coating that protects floors, reduces noise, and resists cracking (iii) handle design- ergonomic chrome or stainless steel handle with knurled grip for secure, comfortable hold, handles designed to prevent hand slippage during sweat (iv) weight range- weights and quantity to be provided as asked by the buyer (v) shape and stability- hexagonal heads to prevent rolling, balanced design to ensure even weight distribution (vi) markings- weight values clearly printed on each head for easy identification, (i) core material- made from high density cast iron or steel core for durability and accuracy (ii) rubber coating- thick high quality non-marking rubber coating that protects floors, reduces noise, and resists cracking (iii) hole diameter- standard 50mm (olympic) centre hole to fit olympic bars (iv) weight accuracy- precision weight tolerance within +- 1 to 2 % to ensure training consistency (v) shape and texture- round, flat plates with textured or smooth surface for easy handling and stacking (vi) markings- weight clearly embossed in kg on each plate, (i) material and construction- made from tensile alloy steel with a tensile strength of 150000 psi or more for durability and flexibility (ii) dimensions- diameter of standard olympic bar, length and shape should be as required by user (iii) sleeve and rotation- needle or ball bearing sleeves for smooth rotation, reducing breast and elbow strain (iv) knurling- aggressive but comfortable knurling pattern for grip, centre knurling present on men bar for better stability during squats (v) weight capacity- rated to hold up to 680kg (vi) finishing- finished with black oxide chrome or stainless steel for corrosion resistance and aesthetics, (i) material- made from high density eva foam or expanded poly polypropylene for durability and firmness (ii) size and dimension- typical length 30-45 cm, diameter 12-15 cm (iii) texture- smooth or riggedor texture surface to target muscle notes to improve blood flow (iv) durability- retains shape after repeated use, resistant to cracking and deformation (v) weight and portability- lightweight and easy to carry, fits in gym bags, (i) material- made from durable rubber, leather or synthetic leather with textured surface for grip (ii) size and diameter- diameter range from 20 - 35 cm depending on weight (iii) construction- filled with gel for even weight distribution and controlled bounce (iv) durability- designed to withstand repeated impact and throwing, (i) material- heavy duty braided for durability and resistance to fraying (ii) length- standard length of 36-40 cm for full extension and range of motion (iii) end stoppers- thick rubber or polymer ends to ensure secure grip and prevent slipping (iv) attachment loop- chrome plated steel connector loop for easy clipping onto cable machines (v) grip comfort- ergonomic design allows for comfortable, slip resistance grip during intense sets, (i) material- solid steel construction with chrome or black oxide finish for corrosion resistance (ii) length- 18 - 24 inches for controlled grip width (iii) grip surface- knurled and rubber coated grip for secure non-slip handling (iv) rotation- swivel attachment for smooth movement during curls and pushdowns, (i) material- made from hardened steel with corrosion resistant coating (ii) design- spring loaded or clip style pin for quick and secure locking (iii) size- fits standard olympic bars and machines with 25-50 mm diameter holes (iv) strength- engineered to withstand heavy loads without banding or slipping (v) grip- ergonomic handle or ring for easy insertion and removal (vi) usage- used to secure plates on bars or adjust machine settings safely, (i) material- solid steel construction with chrome or powder coated finish for corrosion resistance (ii) design- angled v shape encourage natural hand positioning and reduce joint strain (iii) grip surface- knurled and rubber coated grip for secure non-slip handling (iv) width- standard grip of 20-25 cm for close grip exercise (v) rotation- central rotating eyelet for fluid cable movement during pull and row exercises.
Agency / Dept :
indian air force IAF
Due Date :
Aug 20, 2026 (11 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16445977
Location : chennai , tamil nadu
Source : GEM Tenders
LIVE TENDER
tender for central procurement of messtrap items against ard 26 cup and saucer , desert spoon , desert knife , tea spoon , coffee spoon , butter knife , degchi with lid 20.5 x 16.6 cm , degchi with lid 28 x 20 cm , spoon rice serving , urn tea coffee , knife veg with blade , pressure cooker 12 ltr cap , dinner plate 10 inch , liquor glass , karai 50 cms for deep frying , cup tea pc ew , plate pudding desert ew pc , spoon soup , dish butter pc , dish flat 35 cm , plate salad pc , basin sugar glass , casserole , beer mug , food warmer , napkin table , pan frying iron medium , lime squeezer , canister sugar tea , bucket pantry with cover plastic 20 ltr , decanters claret 01 ltr , glass sherry or port , knife bread table ss , duster blue check , knife cook 230 mm , slicer egg ss , glass champagne , knife lever ss , cash box 28 x 16 mm , karahi flat bottom , jar pickle glass with cover , potatoes peeler hand operated , masher potatoes ss , masala container , tawa with wooden handle , strainer rice 500 x 255 mm , spoon gravy large ss , slicer egg 4 cm hand ss , sieves atta flour , sandwich toaster , plate soup , pins rolling , jug ss , glass water 10 men set , fork table ss , fork table dessert , container for dry ration , cloth striped glass , bowl soup , bowl finger ss , plate dinner ew proclaim crested , wet grinder 5 ltrs , juicer , flask steel , strainer gravy conical , pot tea coffee pc 1 ltr , tumbler gin , cooker pressure small , katorah no.2 uc 45 ms , cooking pot 4 men set with cover , degchi small with lid , container cereal plain with lid 10 kg ss , grater round ss , serving tray , serving tray vip , bowl serving 4-6 person , degchi large with lid , mould jelly, aluminium 1 ltrs , ladles,kitchen assorted , fork small fruit , dough kneeder , kettle, electric , tub plastic , chapathi ballan , crates for fresh ration , idly maker , pan frying large , wet masala grinder , vegetable chopping board , bucket ice , egg beater , strainer, tea ss , tiffin carrier 5 men set , meat chopping board , water dispencer hot and cold , degchi medium with lid , tiffin carrier 10 men set , salt pepper dispencer , pot soup 06 ltrs , knife, table, large, ss , knife, table, small, ss , knife butcher cutting , ladel ss large , ladel ss medium , saunf box , scoop flour , bread toaster , cooker pressure large , cooker pressure medium , cork screw ss , gas burner , kettle tea ss 05 ltrs , peg measure , peg measure sherry ss , stainer gravy , toast rack 4 partition , weighing machine 1-100 kgs , weighing machine 1-20 kgs , weighing machine 1-5 kgs , table cloth , induction plate , dough mixture , electric hot plate , kadai for deep frying , slicer, cup and saucer, desert spoon, desert knife, tea spoon, coffee spoon, butter knife, degchi with lid 20.5 x 16.6 cm, degchi with lid 28 x 20 cm, spoon rice serving, urn tea coffee, knife veg with blade, pressure cooker 12 ltr cap, dinner plate 10 inch, liquor glass, karai 50 cms for deep frying, cup tea pc ew, plate pudding desert ew pc, spoon soup, dish butter pc, dish flat 35 cm, plate salad pc, basin sugar glass, casserole, beer mug, food warmer, napkin table, pan frying iron medium, lime squeezer, canister sugar tea, bucket pantry with cover plastic 20 ltr, decanters claret 01 ltr, glass sherry or port, knife bread table ss, duster blue check, knife cook 230 mm, slicer egg ss, glass champagne, knife lever ss, cash box 28 x 16 mm, karahi flat bottom, jar pickle glass with cover, potatoes peeler hand operated, masher potatoes ss, masala container, tawa with wooden handle, strainer rice 500 x 255 mm, spoon gravy large ss, slicer egg 4 cm hand ss, sieves atta flour, sandwich toaster, plate soup, pins rolling, jug ss, glass water 10 men set, fork table ss, fork table dessert, container for dry ration, cloth striped glass, bowl soup, bowl finger ss, plate dinner ew proclaim crested, wet grinder 5 ltrs, juicer, flask steel, strainer gravy conical, pot tea coffee pc 1 ltr, tumbler gin, cooker pressure small, katorah no.2 uc 45 ms, cooking pot 4 men set with cover, degchi small with lid, container cereal plain with lid 10 kg ss, grater round ss, serving tray, serving tray vip, bowl serving 4-6 person, degchi large with lid, mould jelly, aluminium 1 ltrs, ladles,kitchen assorted, fork small fruit, dough kneeder, kettle, electric, tub plastic, chapathi ballan, crates for fresh ration, idly maker, pan frying large, wet masala grinder, vegetable chopping board, bucket ice, egg beater, strainer, tea ss, tiffin carrier 5 men set, meat chopping board, water dispencer hot and cold, degchi medium with lid, tiffin carrier 10 men set, salt pepper dispencer, pot soup 06 ltrs, knife, table, large, ss, knife, table, small, ss, knife butcher cutting, ladel ss large, ladel ss medium, saunf box, scoop flour, bread toaster, cooker pressure large, cooker pressure medium, cork screw ss, gas burner, kettle tea ss 05 ltrs, peg measure, peg measure sherry ss, stainer gravy, toast rack 4 partition, weighing machine 1-100 kgs, weighing machine 1-20 kgs, weighing machine 1-5 kgs, table cloth, induction plate, dough mixture, electric hot plate, kadai for deep frying, slicer
Agency / Dept :
indian coast guard ICG
Due Date :
Aug 13, 2026 (4 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16446211
Location : visakhapatnam , andhra pradesh
Source : GEM Tenders
LIVE TENDER
tender for procurement of messtraps miscellaneous items crockery1 , crockery2 , crockery3 , crockery4 , crockery5 , crockery6 , crockery7 , crockery8 , crockery9 , crockery10 , crockery11 , crockery12 , crockery13 , crockery14 , crockery15 , crockery16 , crockery17 , crockery18 , crockery19 , crockery20 , crockery21 , crockery22 , crockery23 , crockery24 , crockery25 , crockery26 , crockery27 , crockery28 , crockery29 , crockery30 , crockery31 , crockery32 , crockery33 , crockery34 , crockery35 , crockery36 , crockery37 , crockery38 , crockery39 , crockery40 , crockery41 , crockery42 , crockery43 , crockery44 , crockery45 , crockery46 , crockery47 , crockery48 , crockery49 , crockery50 , crockery51 , crockery52 , crockery53 , crockery54 , crockery55 , crockery56 , crockery57 , crockery58 , crockery59 , crockery60 , crockery61 , crockery62 , crockery63 , crockery64 , crockery65 , crockery66 , crockery67 , crockery68 , crockery69 , crockery70 , crockery71 , crockery72 , crockery73 , crockery74 , crockery75 , crockery76, cloth glass cleaning, cloth table double damask white, napkin table, knife cook 23 cms, basket rations, board paste wooden, bowl soup, bowl salad 20 cms ss, box salt, brush crumb, bucket pantry with cover, canister, cash box, cellar salt, chopper meat 25 cms, collander mk ii 35.5 ltrs, collander small, container cereal with lid 10 kgs, container cereal with lid 15 kgs, cork screw, counter balance spring 1-100 kgs, decanter claret 1 ltrs, degchi 20.5 cms / 16.6 cms, degchi 23 cms /17 cms, degchi 28 cms /20 cms, degchi medium 4 men set, dish pie 20 cms, dish pie 30 cms, dredger flour, grater round, jar pickle glass with cover, karahi 50 cms for deep frying, karahi flat bottom, katori, laddle soup, ladle large, ladle medium, ladle sauce, lid for degchi 23 cms / 17 cms, machine bread slicing 160 cms / 45 cms / 91.6 cms, mesher potato, mould jelly 1 ltrs, needles trussing, old urn tea & coffee 100 cups, pan frying large 61 cms, pan frying medium 23 cms, pan patty small, pestle & mortar, pin rolling wood 42 cms / 7 cms, pot 4 men set with cover, potato peeler hand operated, pressure cooker 12 ltrs, pressure cooker 22 ltrs, pressure cooker 6 ltrs, roller wood for table cover, scoop flour hand mk ii, sieves atta/ flour 40 cms, sieves flour round 305 mm, slicer egg 15 cms, spice box, strainer gravy conical, strainer gravy round, strainer rice 50 cms / 25.5 cms, strainer tea, tawa 30 cms dia with wooden handle, tin baking bread 800 gmd, toast rack 4 patrition, tray mess compartmental, tub washing 27 ltrs, tureen soup g/l 4 ltrs, urn for tea/ coffee ss 50 cups, waiter round 25 cms, waiter round 30 cms, whisks egg, can milk 5 ltrs, kettle tea 5 ltrs
Agency / Dept :
indian navy
Due Date :
Aug 14, 2026 (5 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16547177
Location : udhampur , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for step up climber , standing multi flight , half rack , incline t bar , pull over machine , seated tibia trainer , power squat machine , glute ham developer , wooden climbing hang board or finger board , funnel grip or pinch grip trainer , cuboidal grip or block grip trainer , cuboidal barbell or grip strength bar , rolling grip or rolling handle trainer , weighed dip belt , fat grip of thick bar grip adapter , weight training sled or push pull sled , ski training machine or ski ergometer , wall ball target board , commercial cross fit monkey bar rig, purchase of cross fit training equipment, step up climber, standing multi flight, half rack, incline t bar, pull over machine, seated tibia trainer, power squat machine, glute ham developer, wooden climbing hang board or finger board, funnel grip or pinch grip trainer, cuboidal grip or block grip trainer, cuboidal barbell or grip strength bar, rolling grip or rolling handle trainer, weighed dip belt, fat grip of thick bar grip adapter, weight training sled or push pull sled, ski training machine or ski ergometer, wall ball target board, commercial cross fit monkey bar rig
Agency / Dept :
indian army
Due Date :
Aug 10, 2026 (1 day left)
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Rolling Machine. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Rolling Machine sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Rolling Machine Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Rolling Machine, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Rolling Machine Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Rolling Machine Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Rolling Machine.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Rolling Machine depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Rolling Machine Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Rolling Machine bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Rolling Machine. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Rolling Machine, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Rolling Machine, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Rolling Machine?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Rolling Machine tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Rolling Machine?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Rolling Machine, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Rolling Machine is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All