sales@tender18.in| +917069661818
Register Now Free Trail
Register Now Free Trail
Search Tenders
Filters
Reset All
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source
Tender Type

259Latest Mechanical assembly Tenders List

Latest Mechanical assembly Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Mechanical assembly tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Mechanical assembly tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Mechanical assembly Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Mechanical assembly tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Mechanical assembly Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Mechanical assembly Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Mechanical assembly Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Mechanical assembly tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Mechanical assembly Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Mechanical assembly sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Mechanical assembly tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Mechanical assembly tenders.

Is EMD mandatory for all Mechanical assembly tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Mechanical assembly work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Mechanical assembly tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Mechanical assembly Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

T18 Ref No : 16440836
Location : ramachandrapuram , telangana
NEW TENDER
tender for full mechanical assembly of 250 lpm mlos, full mechanical assembly of 250 lpm mlos at gt03 shop
Agency / Dept :
bharat heavy electricals limited BHEL
Due Date :
Aug 04, 2026 (7 days left)
Tender Value :
15628000
View Documents
T18 Ref No : 16432400
Location : ghaziabad , uttar pradesh
NEW TENDER
tender for the different mechanical work of 'dismantling of loco equipment / sub-assemblies of wap5 locomotive, at electric loco shed- ghaziabad.
Agency / Dept :
northern railway NR
Due Date :
Aug 14, 2026 (17 days left)
Tender Value :
4660168
View Documents
T18 Ref No : 16424008
Location : bardhaman , west bengal
Source : GEM Tenders
NEW TENDER
tender for supply laying and testing cable xlpe insulated screened pvc bedded galvanized steel strip size 185 sq mm 3.5 core , excavation in trenches not exceeding 1.5 m widthandnot exc 1.5m in depth getting out in soft loose soil etc. , excavation in trenches not exceeding 1.5 m widthandexc 1.5m in depth getting out in soft loose soil etc. , returning filling in including spreading levelling wateringandwell ramming in layers etc. , removal of surplus soil to a distance not exceeding 50 manddepositing where directed by engr in charge. , supplyandlay of pcc cable cover class hv type 1 flat size 300mmx180mmx40mm etc. , supplyandlay for dry clean dirtless river sand filling for cable protection with a layer of 8cm deep etc. , mandl for double wall corrugated dwc high density polyethylene pipes hdpe of 90mm etc. , mandl for fixing gi tubing 80mm dia light grade use for the protection of cable etc. , mandl for manual boring under road crossingandlaying pipe across the road etc. , sandf pcc cable route marker of size 900x300x70mm embossed with ht ug cable etc. , materialandlabour for steel tubular poles complete with cast iron base palate final taper plug bolts nuts and screws etc. , m and l for switch air break gang operated triple pole out door type unit on ht 11 kv 50 cycle etc. , m and l for 11 kv 200 amps outdoor type horn gap fuse set conforming to is 9385 etc. , m and l for cross arms bracing supports clampsandback plates fabricated from structural steel etc. , m and l for pin type porcelain polymer vitreous brown insulator of size 150mm height 150mm etc. , m and l for disc type porcelain polymer insulator vitreous 145 mm heightand255 mm diameter etc. , m and l for lightning arrester surge protector 11 kv grade heavy duty single pole etc. , s and f danger notice plate of 1.6mm thick mild steel sheet vitreous enamelled white etc. , mandl for cement concrete in foundations fillingandmass concrete etc. , mandl for pcc 1 3 6 type c2 using 40mm grade aggregate as in foundation etc. , mandl for pcc 1 2 4 type b1 using 20mm grade aggregate as in coping etc. , m and l for earthing complete with galvanised steel earth plate electrode etc. , m and l for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried etc. , mandl cable jointing kit for 11 kv earthed grade cable for outdoor termination heat shrink type joint etc. , m and l cable jointing kit for 11 kv earthed grade cable for straight through heat shrink type joint complete with jointing etc. , wrecking crow bar or claw bar as per is 706 (q3), supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 11100 volts grade, of size 185 sq mm 3.5 core all as specifiedandas directed., excavation in trenches not exceeding 1.5 m widthandnot exc 1.5m in depth getting out in soft/loose soil all as s+b1+c2 c13+c2 c15+b1+c2 c13+c2 c2 c15, excavation in trenches not exceeding 1.5 m widthandexc 1.5m in depth getting out in soft/loose soil all as specifiedandas directed., returning filling in including spreading levelling wateringandwell ramming in layers not exceeding 25 cm in thick using excavated soft/loose soil all as specifiedandas directed., removal of surplus soil to a distance not exceeding 50 manddepositing where directed by engr in charge., supplyandlay of pcc cable cover class hv type 1 flat size 300mmx180mmx40mm complete all as specifiedanddirected., supplyandlay for dry, clean, dirtless river sand filling for cable protection with a layer of 8cm deep before layingand15cm covering above the top edge of cable after laying & punned down to required height, complete all as specifiedandas directed. note only punned thickness shall be measured & paid., m&l for double wall corrugated (dwc) high density polyethylene pipes (hdpe) of 90mm dia laid in trenches for cable protection complete all as spcifiedanddirected., m&l for fixing gi tubing 80mm dia light grade use for the protection of cable all as specifiedanddirected by engr in charge., m&l for manual boring under road crossingandlaying pipe across the road for laying cables complete all as specifiedandas directed., s&f pcc cable route marker of size 900x300x70mm, embossed with ht ug cable 11kv andexcavation of 40cm depth, grouted inandincluding pcc (1 2 4) type b 2 (using 20mm graded stone aggregate) complete all as specifiedanddirected., materialandlabour for steel tubular poles complete with cast iron base palate, final taper plug bolts, nuts & screws as specified type 410 sp 55, 11.00 meter long including painting all external exposed steel surfaces with two coats of aliminium paint over a coat of red oxide zinc chrome primer including marking pole numbers in a 15 cm dia yellow circle with number writting with black syenthic paint/ stricker, including painting strips in alternate from top of coping upto 1.50m height, with three strips of black syenthatic paint & two strips of yellow/ sky blue paint (as per existing pattern through out the circumference of pole), including all internal surfacesandexternal surfaces upto the planting depth shall be painted with two coats of black bitumenous paint complete all as specifiedandas directed complete all as specified. (note earth work, pcc work, shall be measuredandpaid separately.), m & l for switch air break gang operated triple pole out door type unit on ht 11 kv 50 cycle ac suitable for current rating upto 400 amps mechanically operated mounted on porcelain/polymer insulators (9 insulators)andframe with operating mechanism worked from ground level with earth switchandincluding locking arrangement, acsr conductor complete with taking down old unserviceable complete all as specifiedanddirected., m & l for 11 kv, 200 amps, outdoor type horn gap fuse set conforming to is 9385 (part i & ii) / relevant latest is standards, complete with galvanized steel horn assembly, suitable fuse element, heavy duty porcelain/polymer insulators, gi channel/angle mounting structure, connectors, clamps, nuts, boltsandall accessories, installed on pole mounted ht structure complete including taking down old unserviceable all as specifiedanddirected., m & l for cross arms , bracing, supports , clampsandback plates fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot drilling holes for bolts in any shape or size as directed inclusive of 2 coats of aluminium paint over a coat of red oxide primer after dismantling old unserviceable cross armsandcomplete all as specifiedandas directed., m & l for pin type, porcelain/polymer, vitreous brown insulator of size 150mm height, 150mm dia 11000 volts grade including one galvanized mild steel spindle with two galvanized iron washersandone galvanized iron nut complete all as specifiedandas directed., m & l for disc type porcelain/polymer insulator, vitreous, 145 mm heightand255 mm diameter, ballandsocket type, suitable for 11,000 volts grade, complete with one galvanized mild steel spindle, two galvanized iron washersandone galvanized iron nut, complete in all respects, as specifiedandas directed., m & l for lightning arrester/surge protector 11 kv grade heavy duty, single pole, self supporting station, expulsion type class 65 ka capacity with all fittings complete all with taking down old unserviceable all as specifiedanddirected., s & f danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figuresandconventional skullandbones in signal red colourandfixed with m.s. clamps, boltsandnuts of approved size, for ht, 25x20cm size complete all as specifiedanddirected., m&l for cement concrete in foundations, fillingandmass concrete type d2 1 4 8 (using 40mm grade aggregate), m&l for pcc 1 3 6 type c2 (using 40mm grade aggregate) as in foundation for pole etc complete all as specifiedandas directed., m&l for pcc 1 2 4 type b1 (using 20mm grade aggregate) as in coping for pole inclduing form workandfinishing the surfaces evenandsmooth etc complete all as specifiedanddirected., m and l for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground earth pit not less than 225 metres deep below ground level with top edge of the plate not less than 15 metres below normal ground level connected to galvanised iron strip 25x4 mm as earth lead alongwith gi protection pipe by means of bolts nuts check nutsandwashers of galvanised iron or steel all as shown in electrical plate no 3 connected to earthing test pointandpcc earth pitandci coverand funnel with watering pipe wire mesh earth lead protection pipe etc complete all as specified or indicated including testing on completion, m & l for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4 mm galvanised iron strip complete, m&l cable jointing kit for 11 kv (earthed) grade cable for outdoor termination heat shrink type joint complete with jointing materialandaccessories suitable for 3 core xlpe armoured aluminium conductor cable of size 185 sqmm 3 core, complete all as specifiedanddirected., m & l cable jointing kit for 11 kv (earthed) grade cable for straight through heat shrink type joint complete with jointing materialandaccessories suitable for 3 core xlpe armoured aluminium conductor cable of size 185 sqmm, complete all as specifiedanddirected.
Agency / Dept :
indian army
Due Date :
Aug 04, 2026 (7 days left)
Tender Value :
0
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16424015
Location : bardhaman , west bengal
Source : GEM Tenders
NEW TENDER
tender for supply laying and testing cable xlpe insulated screened pvc bedded galvanized steel strip or wire etc. , excavation in trenches not exceeding 1.5 m width and not exc 1.5m in depth etc. , excavation in trenches not exceeding 1.5 m width and exc 1.5m in depth etc. , returning filling in including spreading levelling watering and well ramming in layers etc. , removal of surplus soil to a distance not exceeding 50 m and depositing etc. , supply and lay of pcc cable cover class hv type 1 flat size 300mmx180mmx40mm etc. , supply and lay for dry clean dirtless river sand filling for cable protection with a layer of 8cm etc. , m and l for double wall corrugated dwc high density polyethylene pipes hdpe etc. , m and l for fixing gi tubing 80mm dia light grade use for the protection of cable etc. , m and l for manual boring under road crossing and laying pipe across the road etc. , s and f pcc cable route marker of size 900x300x70mm embossed with ht ug cable etc. , material and labour for steel tubular poles complete with cast iron base palate final taper plug bolts nuts and screws etc. , m and l for switch air break gang operated triple pole out door type unit etc. , m and l for 11 kv 200 amps outdoor type horn gap fuse set conforming to is 9385 etc. , m and l for cross arms bracing supports clamps and back plates fabricated etc. , m and l for pin type porcelain vitreous brown insulator of size 150mm etc. , m and l for lightning arrester surge protector 11 kv grade heavy duty single pole etc. , s and f danger notice plate of 1.6mm thick mild steel sheet vitreous enamelled etc. , m and l for cement concrete in foundations filling and mass concrete type d2 1 etc. , m and l for pcc 1 3 6 type c2 using 40mm grade aggregate as in foundation etc. , m and l for pcc 1.2.4 type b1 using 20mm grade aggregate etc. , m and l for earthing complete with galvanised steel earth plate electrode 60x60cm etc. , m and l for earth continuity conductor or main earthing lead fixed to wall on batten etc. , dismantling of acsr or aac conductors , dismantling concrete poles struts any size , dismantling cross arms of m.s. channel or angle sections etc. , dismantling insulators any type any size , pick axe as per is 273 (q4), supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 11000 volts grade, of size 95 sq mm 3 core all as specified and as directed., excavation in trenches not exceeding 1.5 m width and not exc 1.5m in depth getting out in soft/loose soil all as specified and as directed., excavation in trenches not exceeding 1.5 m width and exc 1.5m in depth getting out in soft/loose soil all as specified and as directed., returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in thick using excavated soft/loose soil all as specified and as directed., removal of surplus soil to a distance not exceeding 50 m and depositing where directed by engr in charge., supply and lay of pcc cable cover class hv type 1 flat size 300mmx180mmx40mm complete all as specified and directed., supply and lay for dry, clean, dirtless river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying & punned down to required height, complete all as specified and as directed. note only punned thickness shall be measured & paid., m&l for double wall corrugated (dwc) high density polyethylene pipes (hdpe) of 90mm dia laid in trenches for cable protection complete all as spcified and directed., m&l for fixing gi tubing 80mm dia light grade use for the protection of cable all as specified and directed by engr in charge., m&l for manual boring under road crossing and laying pipe across the road for laying cables complete all as specified and as directed., s&f pcc cable route marker of size 900x300x70mm, embossed with ht ug cable 11kv and excavation of 40cm depth, grouted in and including pcc (1 2 4) type b 2 (using 20mm graded stone aggregate) complete all as specified and directed., material and labour for steel tubular poles complete with cast iron base palate, final taper plug bolts, nuts & screws as specified type 410 sp 55, 11.00 meter long including painting all external exposed steel surfaces with two coats of aliminium paint over a coat of red oxide zinc chrome primer including marking pole numbers in a 15 cm dia yellow circle with number writting with black syenthic paint/ stricker, including painting strips in alternate from top of coping upto 1.50m height, with three strips of black syenthatic paint & two strips of yellow/ sky blue paint (as per existing pattern through out the circumference of pole), including all internal surfaces and external surfaces upto the planting depth shall be painted with two coats of black bitumenous paint complete all as specified and as directed complete all as specified. (note earth work, pcc work, shall be measured and paid separately.), m & l for switch air break gang operated triple pole out door type unit on ht 11 kv 50 cycle ac suitable for current rating upto 400 amps mechanically operated mounted on insulators (9 insulators) and frame with operating mechanism worked from ground level with earth switch and including locking arrangement, acsr conductor complete with taking down old unserviceable complete all as specified and directed., m & l for 11 kv, 200 amps, outdoor type horn gap fuse set conforming to is 9385 (part i & ii) / relevant latest is standards, complete with galvanized steel horn assembly, suitable fuse element, heavy duty porcelain/polymer insulators, gi channel/angle mounting structure, connectors, clamps, nuts, bolts and all accessories, installed on pole mounted ht structure complete including taking down old unserviceable all as specified and directed., m & l for cross arms , bracing, supports , clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot drilling holes for bolts in any shape or size as directed inclusive of 2 coats of aluminium paint over a coat of red oxide primer after dismantling old unserviceable cross arms and complete all as specified and as directed., m & l for pin type, porcelain, vitreous brown insulator of size 150mm height, 150mm dia 11000 volts grade including one galvanized mild steel spindle with two galvanized iron washers and one galvanized iron nut complete all as specified and as directed., m & l for lightning arrester/surge protector 11 kv grade heavy duty, single pole, self supporting station, expulsion type class 65 ka capacity with all fittings complete all with taking down old unserviceable all as specified and directed., s & f danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with m.s. clamps, bolts and nuts of approved size, for ht, 25x20cm size complete all as specified and directed., m&l for cement concrete in foundations, filling and mass concrete type d2 1 4 8 (using 40mm grade aggregate), m&l for pcc 1 3 6 type c2 (using 40mm grade aggregate) as in foundation for pole etc complete all as specified and as directed., m and l for pcc 1.2.4 type b1 using 20mm grade aggregate as in coping for pole inclduing form work and finishing the surfaces even and smooth etc complete all as specified and directed., m and l for earthing complete with galvanised steel earth plate electrode 60x60cm 6mm thick buried directly in ground earth pit not less than 2.25 metres deep below ground level with top edge of the plate not less than 15 metres below normal ground level connected to galvanised iron strip 25x4 mm as earth lead alongwith gi protection pipe by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate no 3 connected to earthing test point and pcc earth pit and ci cover and funnel with watering pipe wire mesh earth lead protection pipe etc complete all as specified or indicated including testing on completion., m & l for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32x6 mm galvanised iron strip complete, dismantling of acsr or aac conductors, dismantling concrete poles/ struts, any size, dismantling cross arms of m.s. channel or angle sections etc. complete and setting aside for re use with in 50m, dismantling insulators any type, any size
Agency / Dept :
indian army
Due Date :
Aug 04, 2026 (7 days left)
Tender Value :
0
View Documents
T18 Ref No : 16436392
Location : jagadhri , haryana
NEW TENDER
tender for snatch bottom block complete assembly, supply of snatch bottom block complete assembly as per specification below:1. 10 ton snatc h block assembly consisting of pulleys with enclosed hook, crosshead, pin, and bearings suitable for 4 falls 2. snatch block design of the crane as per is: 3177-2020 and is: 807-2006 3. lifting hook is: 3815-1969 or l atest is: 15560 4. the hook should be 20-ton proof load-tested, liquid penetration test, dimension report, c hemical and mechanical report with inspection certificate from a government-approved test house (or) nab l-accredited laboratory shall be provided 5. hook type: c type - warranty period: 30 months after the da te of delivery
Agency / Dept :
northern railway NR
Due Date :
Aug 03, 2026 (6 days left)
Tender Value :
0
View Documents
T18 Ref No : 16328430
Location : medak , telangana
Source : GEM Tenders
LIVE TENDER
corrigendum tender for rotatory electro mechanical actuator assembly (rema)
Agency / Dept :
bharat dynamics limited BDL
Due Date :
Jul 31, 2026 (3 days left)
Tender Value :
0
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16154985
Location : purola , uttarakhand
Source : GEM Tenders
LIVE TENDER
tender for mechanical seal assembly
Agency / Dept :
sjvn ltd satluj jal vidyut nigam ltd
Due Date :
Jul 29, 2026 (1 day left)
Tender Value :
127695
View Documents
T18 Ref No : 16226702
Location : port blair , andaman and nicobar islands
Source : GEM Tenders
LIVE TENDER
tender for 25pbcc001 eb3010b s 240013 ring impeller wearing ring , eb3010b s 250016 piece distance coupling , eb3010b s 250008 sleeve shaft , eb3010b s 250010 cover bearing , eb3010b s 250035 27 bush coupling , eb6001k bfx63080000 bearing nde , eb6001k s150014 air valve , eb6001k s150025 priming pump casing , eb6001k s290008 01wearing ring , eb6001k 2 5 tph z060021 09 shaft , eb6001k 2 5 tph z060021 03 impeller , eb6001k s00002 s00007 a float with spindle , eb6001k s150009 7 impeller pin nut , eb6001k s150027 27 priming pump rotor , eb6001k s150078 4 rotor shaft , eb3010b s1900 28 ball bearing single row deep groove fag 6308 , eb3010b s240012ring impeller make up , eb6001k 2 5tph z06002 1 10bush bearing nde , eb6001k 2 5tph z06002 1 14 gasket , eb6001k 2 5 tph z06002 1 15 deep groove ball bearing , eb6001k 2 5tph z060021 19 mechanical seal , eb6001k drg s290060 shaft , eb6001k drg s290061 shaft , eb6001k drg s290070 13 mech seal assy , eb6001k drg s290070 16 impeller key , eb6001k drg s290070 22 oil seal , eb6001k drg s290070 23 single row deep groove ball bearing , eb6001k drg s290070 36 o ring , eb6001k drg s290071 13 mech seal assy , eb6001k drg s290071 16 impeller key , eb6001k drg s290071 27 bearing lock nut with washer , eb6001k drg s290071 36 o ring , eb6001k mp96qa210 impeller , eb6001k s100049 mechanical seal assy , eb6001k s150005 3 impeller , eb6001k s150010 impeller nut washer , eb6001k s150037 priming pump float armhinge pin , eb6001k s240001 41 seal oil 50 x 72 x10 , eb6001k s240001 motor motor f0r 100 tph hull fire pump , eb6001k s240002 oil seal , eb6001k s240002 42 gland packing , eb6001k s240002 2bearing ball angular contact no 7208 , eb6001k s240005 combined casing cover , eb6001k s240007 13 shaft , eb6001k s240012 ring impeller make up , eb6001k s240013 04 ring wearing impeller , eb6001k s240018 28 key impeller , eb6001k s240032 35 hex screw m8x20 , eb6001k s290001 27 oil seal 31 x 42 x 27 , eb6001k s290001 28 o ring 3mm dia , eb6001k s290001 30 gland packing , eb6001k s290007 shaft sleeve , eb6001k s290009 01 gland , eb6001k s290015impeller key , eb6001k s290016coupling key , eb6001k s290071- 43 o ring , eb6001k sp900007-24bearing pump end drive end 6308skf-n308 , eb3010b s270020-28 cock 1 2 bsp two way , eb6001k s150020 18 water thrower , eb6001k s150050-701 4 bsp check valve , eb6001k s150053 c seal ring , eb6001k s150078 shaft , eb6001k s240002-30 bolt hex ivi 16 x 38 , eb6001k s240002-33 screw hex m8 x 18 , eb6001k s240006 bearing housing , eb6001k s240008r shaft sleeve , eb6001k s240009r bush bearing , eb6001k s240011water thrower with positive locking , eb6001k s240035 pin coupling , eb6001k s240036 coupling pin washer , eb6001k s250033 air eleminator assembly auto , eb6001k 5260001-37oil seal , eb3010b-s240004 impeller , eb6001k pl mp z060221-24 pressure gauge 0-7 kgcm2 , eb6001k s150053 mechanical seal assembly , eb6001k s240008 shaft sleeve , eb6001k s240014a gland halves , eb6001k s250008r shaft sleeve , additional charges, eb3010b s 240013 ring impeller wearing ring, eb3010b s 250016 piece distance coupling, eb3010b s 250008 sleeve shaft, eb3010b s 250010 cover bearing, eb3010b s 250035 27 bush coupling, eb6001k bfx63080000 bearing nde, eb6001k s150014 air valve, eb6001k s150025 priming pump casing, eb6001k s290008 01wearing ring, eb6001k 2 5 tph z060021 09 shaft, eb6001k 2 5 tph z060021 03 impeller, eb6001k s00002 s00007 a float with spindle, eb6001k s150009 7 impeller pin nut, eb6001k s150027 27 priming pump rotor, eb6001k s150078 4 rotor shaft, eb3010b s1900 28 ball bearing single row deep groove fag 6308, eb3010b s240012ring impeller make up, eb6001k 2 5tph z06002 1 10bush bearing nde, eb6001k 2 5tph z06002 1 14 gasket, eb6001k 2 5 tph z06002 1 15 deep groove ball bearing, eb6001k 2 5tph z060021 19 mechanical seal, eb6001k drg s290060 shaft, eb6001k drg s290061 shaft, eb6001k drg s290070 13 mech seal assy, eb6001k drg s290070 16 impeller key, eb6001k drg s290070 22 oil seal, eb6001k drg s290070 23 single row deep groove ball bearing, eb6001k drg s290070 36 o ring, eb6001k drg s290071 13 mech seal assy, eb6001k drg s290071 16 impeller key, eb6001k drg s290071 27 bearing lock nut with washer, eb6001k drg s290071 36 o ring, eb6001k mp96qa210 impeller, eb6001k s100049 mechanical seal assy, eb6001k s150005 3 impeller, eb6001k s150010 impeller nut washer, eb6001k s150037 priming pump float armhinge pin, eb6001k s240001 41 seal oil 50 x 72 x10, eb6001k s240001 motor motor f0r 100 tph hull fire pump, eb6001k s240002 oil seal, eb6001k s240002 42 gland packing, eb6001k s240002 2bearing ball angular contact no 7208, eb6001k s240005 combined casing cover, eb6001k s240007 13 shaft, eb6001k s240012 ring impeller make up, eb6001k s240013 04 ring wearing impeller, eb6001k s240018 28 key impeller, eb6001k s240032 35 hex screw m8x20, eb6001k s290001 27 oil seal 31 x 42 x 27, eb6001k s290001 28 o ring 3mm dia, eb6001k s290001 30 gland packing, eb6001k s290007 shaft sleeve, eb6001k s290009 01 gland, eb6001k s290015impeller key, eb6001k s290016coupling key, eb6001k s290071-43 o ring, eb6001k sp900007-24bearing pump end drive end 6308skf-n308, eb3010b s270020-28 cock 1 2 bsp two way, eb6001k s150020 18 water thrower, eb6001k s150050-701 4 bsp check valve, eb6001k s150053 c seal ring, eb6001k s150078 shaft, eb6001k s240002-30 bolt hex ivi 16 x 38, eb6001k s240002-33 screw hex m8 x 18, eb6001k s240006 bearing housing, eb6001k s240008r shaft sleeve, eb6001k s240009r bush bearing, eb6001k s240011water thrower with positive locking, eb6001k s240035 pin coupling, eb6001k s240036 coupling pin washer, eb6001k s250033 air eleminator assembly auto, eb6001k 5260001-37oil seal, eb3010b-s240004 impeller, eb6001k pl mp z060221-24 pressure gauge 0-7 kgcm2, eb6001k s150053 mechanical seal assembly, eb6001k s240008 shaft sleeve, eb6001k s240014a gland halves, eb6001k s250008r shaft sleeve, additional charges
Agency / Dept :
integrated defence staff IDS
Due Date :
Jul 31, 2026 (3 days left)
Tender Value :
0
View Documents
T18 Ref No : 16172752
Location : chennur , telangana
Source : GEM Tenders
LIVE TENDER
tender for wx9771615521 drg: - rev: 00 condenser air evacuation packa ge (vacuum pump) 30scfm spec: he57016 rev: , w96716155317 drg: - rev: 00 complete vacuum pump (bare shaft vacuum pump) spec: he57016 rev: 05 itemi , w96716155325 main motor for vacuum pump spec: he57016 rev: 05 size: - itemid: bh010 , w96716155465 heat exchanger for vacuum pump package. spec: he57016 rev: 05 size: - itemid: bh010 , w97716155580 impeller & shaft assembly (complete) , suitable for 30 scfm vacuum pump. spec: he57016 r , w97716155253 coupling complete (for vacuum pump of 30 scfm) spec: he57016 rev: 05 size: to suit the , w97716155059 bearing for vacuum pump (30 scfm) (1set= 2 nos) spec: he57016 rev: 05 size: to suit origi , w96716155589 complete set of gaskets, o-rings for heat exchanger spec: he57016 rev: 05 size: - itemi , w97716152050 complete set of mechanical sealing assembly (de&nde) / gland packing assembly (as applic , w97716155431 seal water recirculaton pump asembly(along with motor etc. ) - for 30 scfm vacuum pump s , w97716152033 temperature element for vacuum pump spec: he57016 rev: 05 size: - itemid: bh010 , w97716117106 supervision of commissioning lump sum per man day charges at site, including every expe , w97716117114 supervision of commissioning lump sum per visit charges (to & fro) including travelling , w97716155822 pressure transmitter for vacuum pump system: 0-1 bar abs spec: he57016 rev: 05 itemid: b , w96716155813 level transmitter for vacuum pump spec: he57016 rev: 05 size: - itemid: bh010 , w96716155902 drg: - rev: 00 differential pressure transmitter for vacuum pump spec: he57016 rev: 05 i , wx9771615513 drg: - rev: 00 flow transmitter cum indicator for vacuum pump spec: he57016 rev: 05 item , w97716155547 level gauge for vacuum pump separator tank spec: he57016 rev: 05 size: to suit original , w97716155733 drg: to suit original supply rev: 00 pressure gauge (0 to -1 bar) itemid: bh010 , w97716155741 drg: to suit original supply rev: 00 pressure gauge (service water) itemid: bh010 , w97716155466 temperature gauge 0- 100 deg c, for vacuum pump heat exchanger size: 0 to 100 deg c dim. , w96716155457 differential pressure gauge for vacuum pump package duplex filter spec: he57016 rev: 05 , w97716155849 drg: to suit original supply rev: 00 air flow meter (rotameter) for vacuum pump system s , w96716155244 drg: 31611770051 rev: 00 temperature transmitter for vacuum pump spec: he57016 rev: 05 i , w97716152041 thermowell for temperature element spec: he57016 rev: 05 size: - itemid: bh010 , wx9771615530 drg: - rev: 00 vacuum pump bearing temperatur e measuring instruments (one s et means construction of
Agency / Dept :
bharat heavy electricals limited BHEL
Due Date :
Jul 30, 2026 (2 days left)
Tender Value :
0
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16345574
Location : rangareddy , telangana
Source : GEM Tenders
LIVE TENDER
tender for gs6.183.184-47-1 , ubak.301224.000-1 , ubak.301224.003-1 , ubak.301224.005-1 , ubak.301224.006-1 , ubak.301224.008-1 , ubak.301251.003-1 , ubak.301251.007-1 , ubak.301412.002-1 , ubak.301561.000-1 , ubak.301716.007-1 , ubak.301716.008-1 , ubak.304121.000-1 , ubak.301224.000-01-1 , ubak.301224.000-02-1 , ubak.301224.000-03-1 , ubak.301224.000-04-1 , ubak.301224.000-05-1 , ubak.301224.003-01-1, 19 types of mechanical assemblies and sub parts, frame, sheathing, partition plate, panel, bracket, plate, guide
Agency / Dept :
hindustan aeronautics limited HAL
Due Date :
Aug 11, 2026 (14 days left)
Tender Value :
0
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Mechanical Assembly. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Mechanical Assembly sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Mechanical Assembly Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Mechanical Assembly, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Mechanical Assembly Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Mechanical Assembly Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Mechanical Assembly.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Mechanical Assembly depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Mechanical Assembly Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Mechanical Assembly bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Mechanical Assembly. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Mechanical Assembly, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Mechanical Assembly, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Mechanical Assembly?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Mechanical Assembly tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Mechanical Assembly?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Mechanical Assembly, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Mechanical Assembly is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All