sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

10Latest Low temperature gloves Tenders List

Latest Low temperature gloves Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Low temperature gloves tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Low temperature gloves tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Low temperature gloves Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Low temperature gloves tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Low temperature gloves Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Low temperature gloves Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Low temperature gloves Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Low temperature gloves tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Low temperature gloves Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Low temperature gloves sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Low temperature gloves tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Low temperature gloves tenders.

Is EMD mandatory for all Low temperature gloves tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Low temperature gloves work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Low temperature gloves tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Low temperature gloves Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17421444
Location : singanamala , andhra pradesh
Source : GEM Tenders
LIVE TENDER
tender for servicing of 75 kg dcp , servicing of 1, 2, 6, 9 kg dcp - stored pressure type , servicing of 6.5 kg co2 , servicing of 4.5 kg co2 , servicing of 2 kg co2 , servicing of 2 kg clean agent , servicing of breathing apparatus set , refilling of 75 kg dcp , refilling of 9 kg dcp - stored pressure type , refilling of 6 kg dcp - stored pressure type , refilling of 2 kg dcp - stored pressure type , refilling of 1 kg dcp - stored pressure type , refilling of 6.5 kg co2 , refilling of 4.5 kg co2 , refilling of 2 kg co2 , refilling of 2 kg clean agent , refilling and hpt of 300 bar scba air cylinder , refilling and hpt of 200 bar emergency air cylinder , hpt of 75 kg dcp , hpt of 1, 2, 6, 9 kg dcp - stored pressure type , hpt of 6.5 kg co2 , hpt of 4.5 kg co2 , hpt of 2 kg co2 , hpt of 2 kg clean agent , maint and hpt of fire hose , painting of 75 kg dcp , painting of 6, 9 kg dcp , painting of 6.5 kg co2 , painting of 4.5 kg co2 , painting of 2 kg co2 , painting of 2 kg clean agent , painting of fire bucket , painting of water monitor , painting of double hydrant post , painting of pipeline, hydrant line , supply and fixing of wall clamps for dcp and co2 fe , supply and fixing of discharge hose of 75 kg dcp , supply and fixing of discharge hose of 6, 9 kg dcp , supply and fixing of discharge hose of 2, 4.5, 6.5 kg co2 , supply and fixing of gun metal caps for 75 kg dcp , supply and fixing of discharge horn for 4.5, 6.5 kg co2 , supply and fixing of safety pin for dcp fe , supply and fixing of lock ring and pin for co2 fe , supply of washer for 6, 9, 75 kg dcp fe , supply of washer for 2, 4.5, 6.5 kg co2 fe , supply and fixing of nylon sqeeze grip , supply of fe hose clamp round hose holder dcp , supply of dcp fe head valve , supply of memento , supply and installation of acp boards with stickers , supply and installation of vinyl stickers , supply and installation of foam boards with stickers , supply of tree plantation boards , supply of flex banners , stenciling alphabets digits and arrows , slogan writing and poster painting , fire fighting training , supply of hydrant post landing valve , supply and installation of butterfly valve 4 inch lockable , supply and installation of butterfly valve 6 inch lockable , supply of half inch valve class 150 , supply of champion paper gasket sheet , supply of dv diaphram 6 inch , supply of dv diaphram 3 inch , supply of strainer mesh class 150 6 inch , supply of strainer mesh class 150 3 inch , supply of fire hose 63mmx15mtr , supply of fire hose 63mmx30mtr , supply of hose coupling 63 mm rubber washer , supply of hose box fibre glass , supply of hose box rubber beading , supply of hydrant valve cap , service for hydrant line welding , supply of welding screen helmet , supply of caution tape roll , supply of first aid box with items , supply of safety goggles , supply of ear muffs , supply of safety shoes , supply of safety helmets , supply of safety belt , supply of cotton coveralls , supply of water gel blanket , supply of low temperature gloves , supply of reflective jackets for drills , supply of wind sock , supply of windsock stand , supply of fire bucket , supply of dcp powder , supply of frp canopies for fire extinguisher, fire and safety amc, as per attached tender document
Agency / Dept :
hindustan petroleum corporation limited HPCL
Due Date :
Oct 03, 2026 (1 day left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17315155
Location : hyderabad , telangana
Source : GEM Tenders
LIVE TENDER
tender for laboratory glassware plasticware reagents - borosilicate glass low form borosil beaker with spout 2l , borosilicate glass petri dish 100 mm , borosilicate glass petri dish 90 mm , borosilicate screw neck borosil bottles amber color 1000 ml , borosilicate screw neck borosil bottles amber color 2000 ml , borosilicate screw neck borosil bottles amber color 500 ml , borosilicate screw neck borosil bottles transparent 1000 ml , borosilicate screw neck borosil bottles transparent 2000 ml , borosilicate screw neck borosil bottles transparent 500 ml , cryo box with lift off lid , cryo rack 50 places , cryogenic storage boxes , flip flop micro tube rack , high temperature resistant screw caps thread gl 45 , high temperature resistant screw caps thread gl 46 , ice bucket ice tray with lid pur double wall insulated pp 1 l , ice bucket ice tray with lid pur double wall insulated pp 2.5 l , reagent bottles wide mouth with screw cap square 1000 ml , reagent bottles wide mouth with screw cap square 500 ml , reagent bottles narrow mouth with screw cap amber 100 ml , reagent bottles narrow mouth with screw cap amber 1000 ml , reagent bottles narrow mouth with screw cap amber 250 ml , reagent bottles narrow mouth with screw cap transparent 100 ml , reagent bottles narrow mouth with screw cap transparent 1000 ml , reagent bottles narrow mouth with screw cap transparent 250 ml , rnase free cryovials sterile externally threaded 1.5 ml , rnase free cryovials sterile externally threaded 2 ml , rnase free cryovials sterile externally threaded 5 ml , rnase free disposable pellet pestles with tube pack of 100 , rnase free filter pipette tips 10 ul , rnase free filter pipette tips 1000 ul , rnase free filter pipette tips 200 ul , rnase free low binding microcentrifuge tubes 0.5 ml , rnase free low binding microcentrifuge tubes 1.5 ml , rnase free low binding microcentrifuge tubes 2 ml , rnase free pcr tubes 0.2 ml , screw cap homogenization tubes 2 ml , sterile disposable transfer pipettes 3 ml , thick walled mortar and pestle set 50 ml , tube cooling rack , absolute ethanol molecular biology grade , isopropanol molecular biology grade , nuclease free water molecular biology grade , rnalater rna stabilization solution , rnase free dnase set , disposable sleeve covers , aluminum foil laboratory grade , kimtech kimwipes 280 sheets per box , powder free nitrile k c examination gloves s , powder free nitrile k c examination gloves m , powder free nitrile k c examination gloves l , laboratory bottle brush nylon bristle assorted sizes , biohazard waste bags red autoclavable 10l size , biohazard waste bags yellow autoclavable 10l size , biohazard waste bags red, autoclavable 20l size , biohazard waste bags yellow autoclavable 20l size , glassware drying rack polypropylene 20 pegs , disposable sterile scalpel no. 11 , disposable sterile scalpel no. 15 , lens cleaning tissue whatman , cryogenic labels 25 x 12 mm , cryogenic labels 25 x 15 mm , cryogenic labels 50 x 25 mm , parafilm m roll, as per specifications
Agency / Dept :
indian council of medical research ICMR
Due Date :
Oct 07, 2026 (5 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17460263
Location : bathinda , punjab
Source : GEM Tenders
LIVE TENDER
tender for tensioner karam pn4000 03 sl , wire rope ss316 dia 8mm , cable extremity ss , instln of lifeline , safety harness full body , fall arrester block karam pcgs06ss , emergency trolley , low temperature gas protective suit , fire proximity suit , leak control kit set , petroleum product clean up , oil spill dispersant water based , non sparking tools , self contained breathing apparatus , elsa 15 min emergency escape unit , intrinsically safe search light , flp or wp speaker with megaphone , hand operated siren as per is 6026 , fireman axe non sparking , first aid box with kit , manual resuscitator , 2 fold stretcher steel , spanners set 1 flat and 1 ring , cold temp gloves cryogenic , electrical gloves lt , electrical gloves ht , electrical tester , chemical goggles, sic of safety harness system at bathinda terminal and emergency trolley at budge budge lube plant, as per technical specifications
Agency / Dept :
hindustan petroleum corporation limited HPCL
Due Date :
Oct 03, 2026 (1 day left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17544391
Location : cuttack , odisha
Source : GEM Tenders
LIVE TENDER
tender for epoxy resin , pigment colour cinnamon , pu rigid foam block , tracing paper , thermos paper multi colour , copolymer polypropylene sheet , polyethylene 4mm milky white , ethaflex sheet r5a 4mm thick , ethaflex sheet 4mm thick , ethaflex sheet 6mm thick , ethaflex sheet 12 mm thick 80 kg , ethaflex sheet 12mm thick 210 kg , ethaflex sheet 2mm thick , ethaflex sheet 3mm thick , plastazote 16 mm , plastazote 08 mm , pelite 08 mm , pelite 12 mm , orfit easy fit thick , low temperature thermoplastic sheet 3mm thick , self additive velcro hook and loop skin colour 1 inch , self additive velcro hook and loop skin colour 2 inch , elastic webbing 1 inch , elastic webbing 2 inch , spica elastic , nylon webbing 1inch , nylon webbing 2 inch , aluminium tube , aluminium stud , threaded stud , aluminium rivet , mobil oil , patten paper , rubber sleeve for cone sander , sewing machine oil , d ring ss with plastic end fitting 25 , d ring ss with plastic end fitting 50 , buckle roller 25mm , buckle flat 25mm , modi thread 8 cord , sewing machine thread 30 nos white , sewing machine thread 30 nos black , sewing machine thread 30 nos skin , cone sander fine , cone sander medium , drum cone sander , cone sander cylindrical , cone sander coarse , cling film , carbon fibre thick mat , carbon fibre thin mat , teflon sheet , rasp graining l 40 , rasp graining l 60 , rasp graining l 82 , sending drum , sending slip , alginate , stone plaster , stockinet nylon 30mm , stockinet nylon 60mm , stockinet nylon 80mm , stockinet nylon 100mm , knee cap small , knee cap medium , colour socks tt , colour socks tf , stump socks , wire mesh ms , wire mesh brass , copper tube , eva foam block blue black , eva foam block black orange , eva foam block multi colour , synthetic leather , copper washer 3mm , copper washer 4 mm , french chalk powder , self tapping screw , rubber bowl , jigsaw blade , surform blade half round with handle , surform blade round with handle , surform blade flat with handle , cloth gloves , asbestos glove , safety googles , poly apron , table cleaning brush , file cleaning brush , steel basin medium , steel basin large , micro filament , disc angle cutter , power screw driver , angel cutter bit , arm cuff 22 36 cm bp monitor cuff , wd 40 , lock tight , 3 m adhesive spray , pop powder universal , pop bandage 10 cm , poip bandage 15 cm , scraper , apparatus bending brace , cordless drill , scoliometer for scoliosis , leather cutter , shaw with stand , heat gun , professional sabre saw comprehensive draping , unit with succen facility , harris mat, dpo raw material, details given in the bid document
Agency / Dept :
swami vivekanand national institute of rehabilitation training and research SVNIRTAR
Due Date :
Oct 21, 2026 (19 days left)
Tender Value :
54.06L
View Documents
T18 Ref No : 17098227
Location : rupnagar , punjab
Source : GEM Tenders
tender for low temperature gloves (q3)
Agency / Dept :
bhakra beas management board BBMB
Due Date :
Sep 14, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 17098373
Location : mettupalayam , tamil nadu
Source : GEM Tenders
tender for emergency trolley , fire proximity suit , pvc suit , leak control kit , ppcc boom 5 inch dia 3 mtr long , ppcc boom 3 inch dia 3 mtr long , granular particles , oil spill dispersant water based , non sparking tools kit , scba , emergency escape unit , flame proof search light , portable megaphone , hand siren with stand , fireman axe , first aid box , manual rescuciator , folding stretcher , cold low temperature hand gloves , electrical rubber hand gloves lt , electrical rubber hand gloves ht , electrical tester , chemical oil splash proof goggles, procruement of emergency trolley for bpcl palakkad installation, emergency trolley, fire proximity suit, pvc suit, leak control kit, ppcc boom 5 inch dia 3 mtr long, ppcc boom 3 inch dia 3 mtr long, granular particles, oil spill dispersant water based, non sparking tools kit, scba, emergency escape unit, flame proof search light, portable megaphone, hand siren with stand, fireman axe, first aid box, manual rescuciator, folding stretcher, cold low temperature hand gloves, electrical rubber hand gloves lt, electrical rubber hand gloves ht, electrical tester, chemical oil splash proof goggles
Agency / Dept :
bharat petroleum corporation limited BPCL
Due Date :
Sep 24, 2026
Tender Value :
15L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16836408
Location : jaipur , rajasthan
Source : GEM Tenders
tender for 8mm t wrench prop nut wrench , 1 point 5mm t allen key , 2mm t allen key , 2 point 5mm t allen key , 3mm t allen key , wire cutter or flush cutter , wire stripper , soldering station temperature controlled , soldering lead or solder wire , soldering flux , tweezers precision or esd set , digital microscope for solder joint inspection , motor thrust meter or test stand , hot air rework station , heat shrink tubing set assorted sizes , heat gun , propeller balancer , lipo or li-ion safe charging bag , battery voltage checker or low voltage alarm , precision screwdriver set phillips or flathead torx hex , digital vernier caliper , cable ties zip ties , esd anti static mat and wrist strap , servo tester esc programming card , tool storage box organizer , fire- resistant lipo storage bag box , smoke absorber , esd gloves , dremmel set , drill machine with drill bits set , ipa , glue gun and glue sticks , silicone glue loctite and misc glue items , straps 40cm 8pcs set , drone bags , screw driver set, procurement of components for training aids in taining lab, as per ts
Agency / Dept :
indian army
Due Date :
Aug 28, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 17016053
Location : jaipur , rajasthan
Source : GEM Tenders
corrigendum tender for 8mm t wrench prop nut wrench , 1 point 5mm t allen key , 2mm t allen key , 2 point 5mm t allen key , 3mm t allen key , wire cutter or flush cutter , wire stripper , soldering station temperature controlled , soldering lead or solder wire , soldering flux , tweezers precision or esd set , digital microscope for solder joint inspection , motor thrust meter or test stand , hot air rework station , heat shrink tubing set assorted sizes , heat gun , propeller balancer , lipo or li-ion safe charging bag , battery voltage checker or low voltage alarm , precision screwdriver set phillips or flathead torx hex , digital vernier caliper , cable ties zip ties , esd anti static mat and wrist strap , servo tester esc programming card , tool storage box organizer , fire- resistant lipo storage bag box , smoke absorber , esd gloves , dremmel set , drill machine with drill bits set , ipa , glue gun and glue sticks , silicone glue loctite and misc glue items , straps 40cm 8pcs set , drone bags , screw driver set, procurement of components for training aids in taining lab, as per ts
Agency / Dept :
indian army
Due Date :
Sep 04, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16933350
Location : thane , maharashtra
Source : GEM Tenders
tender for 26boq26 - gum boot , barricading tape , dust mask , water gel based blanket , wind sock , chemical protection suit , low temperature protection hand glove , ear plugs , proximity suit , hand gloves low temp butyl , safety googles , chemical splash proof goggle , hand gloves cotton knitted with polka dot , earmuff , safety helmet , electric hand gloves class 4, 26boq26, gum boot, barricading tape, dust mask, water gel based blanket, wind sock, chemical protection suit, low temperature protection hand glove, ear plugs, proximity suit, hand gloves low temp butyl, safety googles, chemical splash proof goggle, hand gloves cotton knitted with polka dot, earmuff, safety helmet, electric hand gloves class 4
Agency / Dept :
gail india limited gas authority of india ltd
Due Date :
Sep 12, 2026
Tender Value :
17.28L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16919802
Location : hassan , karnataka
Source : GEM Tenders
tender for river sand , surkhi , lime , brick bats of 20 mm , jaggery , antuwalakai , kadukkai , grinding machine hiring including fuel charges , grinding machine , lime mixing machine , size stone , special size bricks , rubbles stone , modular common brunt clay bricks , cement mortar , trowel sharp edge - blades , trowel curve edge , wooden float , plastic buckets 25 liters , aluminium screed 2inchx1inchx5feet , aluminium screed 2inchx1inchx3feet , curing pipe one inch 100 meter , saw blade , rubber hand gloves set , cloth hand gloves set , gumboots , safety helmet , safety goggles , shovel , pvc round pan , sieving mesh , plastic water storage pot , water storage plastic drums , pvc water drum 2000 liters capacity , 2 hp motor , tarpaulin sheet , disposable face mask , safety belt , hammer 2kgs head with handle , chisel , sharping charges of chisel , gunny bags , aluminium wire 90m coil , switch box 4 module, switch and socket , bulb led 18w , pointing trowel , wire brush , coir brush , transportation of materials , 50mm dia and 5mm thick hollow ms pipe , 2 nos ms steel 15mm thick inter lock chainage , synthetic enamel paint , carriage of rubbish item, supply of good quality river sand (coarse and fine) required for lime works shall consist of natural sand, shall be hard, durable, clean and free from adherent coatings and organic matter, shall not contain the amount of clay not more than 5percentage by mass, free from silt, shall not contain any harmful impurities such as iron pyrites, alkalis, salts, coal or other organic impurities to affect adversely the hardening, strength or durability of the mortar, supply of good quality 1st class surkhi used as fine aggregate in lime mortar. surkhi, powdered broken brick, prepared by pozzolanic material well burnt good quality bricks and clay balls, finely grinded, powdered, free from under burnt particles of soluble salts, more resistant to alkalis and salt solutions, pyrites and adherent coatings of soil or silt, used for making waterproofing, lime mortars and, lime concrete, including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications .( test reports as per is standard from recognised govt agency and the material sample approval should be taken from the office before supplying), supply of good quality un slaked lime directly from quarry not more than 15 days required for preparation of lime putty in traditional method on the process of slaking, from non-hydraulic lime silica and alumina in quantities of less than 15percentage in lime will be accepted, used for masonry mortars, lime concrete and plaster undercoat, minimum 1.25n mm square compressive strength for 7days, etc., including transportation charges, stacking in the required pattern for taking measurements as directed by the work in charge, including cost of all labour etc., as per the specifications, supply of good quality 20 mm brick bats obtained by crushing well-burnt clay bricks of class designation 7.5, hard, sound, and free from under-burnt particles, soluble salts, pyrites, dust, soil, and other deleterious matter, graded to pass through a 20 mm sieve and retained on a 10 mm sieve, suitable for use as coarse aggregate in lime mortar and lime concrete, including loading, transportation, unloading, stacking, all labour, and incidental charges complete as directed by the engineer-in-charge and as per specifications, supply of good quality jaggery, ingredient required for lime mortar including transportation, loading, unloading, stacking, labour etc., complete as per the specifications and directions of the work in charge, supply of good quality antuwalakai (soap nut and feronia additive as locally approved), clean, dry and free from impurities, suitable for preparation of traditional lime mortar to improve workability, durability and bonding properties in conservation works, as directed by the engineer-in-charge, supply of good quality kadukkai - mature, clean and free from foreign matter, suitable for use as a traditional additive in lime mortar for improving strength, durability and water resistance in conservation works, as approved by the engineer-in-charge, grinding machine hiring including fuel charges providing and hiring heavy-duty grinding machine in good working condition, complete with all accessories, suitable for grinding lime, surkhi and other approved materials required for conservation works, including fuel and operational requirements, providing and hiring portable grinding machine in good working condition, complete with necessary accessories, suitable for grinding small quantities of lime mortar ingredients and other approved materials for conservation works, including fuel and operational requirements., lime mixing machine hiring including fuel charges providing and hiring lime mixing machine of adequate capacity, diesel or electrically operated, in good working condition, suitable for uniform mixing of lime mortar for conservation works, complete with all necessary accessories including fuel wherever applicable, size stone 300mm x 300mm x 250mm, bond stone 350mm x 500mm x 250mm size supply of hard, sound and durable natural size stones and bond stones, obtained from approved quarries, free from cracks, weathered portions, laminations and other defects, accurately dressed to the specified dimensions with true beds and joints. the stones shall conform to the provisions of is 1597.size stones shall be used for wall face masonry and structural hearting, while the bond stones shall be provided as tie stones for effective transverse bonding, interlocking and strengthening of masonry in conservation works and the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, special size bricks 220mmx120mmx40mm- should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952 the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, rubbles stone for backfilling 15cm x 22.5cm- supply of hard, sound and durable natural rubble stones of minimum size 150 mm x 225 mm, obtained from approved quarries, free from cracks, weathered portions and other defects, hammer dressed in accordance with is 1129 and conforming to is 1597 (part 1). the stones shall have a minimum thickness of 225 mm, be laid with the broadest face on the prepared bed to achieve proper interlocking, with joints tightly packed using stone spalls. the finished pitching shall be suitable for dry or grouted stone pitching in conservation works and slope protection, the material should be supplied to 252 steps height which is near to the work spot, complete as approved by the engineer-in-charge, modular common brunt clay bricks of class designation 7.5 - should be well brunt, good water absorption, and appearance, requiring uniform size, sharp edges, plane faces, and uniform colour, with minimum compressive strength and controlled water absorption (e.g., lesser than 20percentage), free from cracks, lime nodules, and excessive warping, guided by standards like is 1077, is 2691, and is 3952, cement mortar 1 into 4 where 1 part cement to 4 parts sand-ratio in which specify clean dry sand mention water as needed for workability also note its uses for example bricklaying blockwork and tile bedding and including material quality where opc cement type and standards like is codes in india ensuring consistency with measured proportions for strength., trowel sharp edge blades hardened and tempered highcarbon steei for durabitity staintess steei for rust resistance. handles smooth and seasoned hardwood or pvc. should be in accordance with lndian standards ls 1630 1984., trowel curve edge - blades hardened, tempered high-carbon steel for durability stainless steel for rust resistance. handles smooth, seasoned hardwood or pvc. should be in accordance with indian standards is 1630 (1984)., supply of wooden float of size 300 mm x 150 mm, manufactured from seasoned hardwood such as teak, pine, sheesham or equivalent, having a 10 to 15 mm thick smooth, flat base with slightly bevelled edges and fitted with an ergonomically designed top mounted wooden or high impact composite handle securely fixed with screws or resin bonding. the float shall be lightweight, durable and moisture-resistant, suitable for levelling, compacting and finishing lime mortar, plaster and concrete surfaces in conservation works, complete as approved by the engineer in charge, plastic buckets 25 liters - high-durability specifications to withstand rough handling, heavy loads, and exposure to construction materials like lime, mortar, and sand. made from high-density polyethylene (hdpe) or polypropylene (pp), offering impact resistance, chemical resistance, and uv protection for outdoor use. (the material sample approval should be taken from the office before supplying), aluminium screed 2inchx1inchx5feet supply of aluminium screed of size 2 inch x 1 inch x 5 feet, manufactured from high-strength extruded aluminium section, straight, lightweight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime concrete and plaster surfaces in conservation works, complete as directed by the engineer-in-charge, aluminium screed 2inchx1inchx3feet supply of aluminium screed of size 2 inch x 1 inch x 3 feet, manufactured from high-strength extruded aluminium section, lightweight, straight, corrosion-resistant and free from bends or defects, suitable for levelling and finishing lime mortar and plaster surfaces in conservation works, complete as approved by the engineer-in-charge., curing pipe one inch 100 meter -supply of flexible pvc hose pipe of 25 mm (1 inch) diameter and 100 metres length, manufactured from premium quality pvc, weather-resistant, leak-proof and capable of withstanding normal working pressure, suitable for curing masonry, plaster and concrete works, complete with standard fittings wherever required, supply of industrial quality circular saw blade of 10inch diameter with 30 mm bore, manufactured from high-grade hardened and tempered alloy steel with 40 precision-ground teeth, heavy duty steel plate and optimized kerf width, provided with thermal expansion slots and friction-reducing coating for smooth, stable and reliable cutting with extended service life. the blade shall be easy to installation , suitable for cutting wood, plastics and non-ferrous metals, and compatible with professional cutting machines, complete as approved by the engineer in charge., rubber hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., cloth hand gloves set which should compliance with standards such as en 388 2016 for mechanical risk and ansi or isea 105 for cut resistance. the material sample approval should be taken from the office before supplying., gumboots should meet requirements such as water impermeability puncture resistance and slip resistant soles safety or protective footwear en iso 20345. it has a minimum impact resistance of 200 joules and compressive strength of at least 15 kn at the toe cap. the material sample approval should be taken from the office before supplying., safety helmet strong, rigid materials like high density polyethylene hdpe, abs, or polypropylene pp, dome shaped, without metallic parts, uv resistant. harness system suspension, impact absorption, penetration resistance, electrical insulation class g general, temperature resistance, standards and certifications is 2925the material sample approval should be taken from the office before supplying., safety goggles- should be impact-resistant polycarbonate lenses, uv protection, anti-fog scratch coatings, and a wraparound side-shield design for full coverage, fitting snugly and comfortably with ventilation, often meeting standards like ansi z87.1, ensuring protection from debris, dust, and radiation for construction environments. (the material sample approval should be taken from the office before supplying), supply of industrial quality multi purpose folding shovel manufactured from high strength metal, rugged, lightweight and corrosion-resistant, suitable for digging, chopping, scooping, hammering and scraping applications. the shovel shall be foldable for easy storage and portability, with an overall shovel length of approximately 23.25 inches 59 cm, saw length with handle of approximately 12.5 inches, integrated saw blade length of approximately 5.5 inches 14 cm, maximum weight of 525 g, and conforming to uiaa safety certification or equivalent, complete as approved by the engineer in charge, pvc round pan ghamela in which high grade virgin polyvinyl chloride or heavy duty polypropylene for high strength and flexibility. smooth interior surface crack and impact resistant, weather resistant for both indoor and outdoor use in which generally 5mm to 10mm thickness and shape is round open to top bowl and standard construction sizes usually 15 to 8 inches diameter and 10 kg to 20 kg load capacity. roughly 8 to 12 inches height. the material sample approval should be taken from the office before supplying., sieving mesh with wooden side frame with stand mechanism of size 2 feet x 5feet fabricated with ss304 ss316 stainless steel wire mesh of approved aperture and gauge securely fixed to a rigid hardwood frame teak neem or treated pine resistant to moisture decay and heavy usage. the unit shall be mounted on a sturdy wooden stand mechanism for convenient operation ensuring stability during sieving of sand surkhi lime and other construction materials used in conservation works. the mesh shall be corrosion resistant durable and free from defects complete as approved by the engineer in charge., plastic water storage pot supply of portable water storage pot manufactured from food-grade virgin high density polyethylene hdpe, polypropylene pp or pet plastic, free from bpa and harmful chemicals, suitable for safe storage of drinking and construction water. the pot shall be durable, leak-proof, uv resistant and provided with a tight fitting screw lid and leak proof plastic tap or dispensing arrangement, with integrated top handle or side grips for easy handling and transportation, complete as approved by the engineer in charge, water storage plastic drums 200l to 200 liters capacity, made of hdpe plastic, corrosion resistance, uv stability, and lightweight 8to10 kg empty removable lid with a metal or plastic locking ring clamp for easy filling, cleaning, and access. the material sample approval should be taken from the office before supplying, pvc water drum 2000 liters capacity of 2000 liter pvc water drum or tank typically feature like durable uv stabilized plastic cylindrical shapes varying thickness for strength and offering strong corrosion resistant storage for drinking industrial or agricultural water needs with options for multiple layers and specific fittings., supply of 2 hp single phase electric motor operating on 220to 240 v ac, 50 and 60 hz power supply, delivering 1.5 kw output with a rated speed of 1440 rpm 4pole or 2800 rpm 2pole and full-load current of 9.2 to 12 a. the motor shall be manufactured with 100 percentage copper windings, enclosed in a totally enclosed fan cooled tefc casing with ip55 protection against dust and water ingress, suitable for continuous operation in construction and conservation works, complete as approved by the engineer in charge., tarpaulin sheet 30 feet x 40 feet high-density polyethylene (hdpe) or multi-layered cross laminated (mlcl) materials, often with 120 gsm to 250 gsm (grams per square meter) thickness for durability, 100% waterproof and weatherproof and uv stabilized/protected (essential for long-term outdoor exposure)., disposable face mask supply of disposable 3ply non woven face mask comprising an outer hydrophobic spun bond non woven layer, a middle high density melt blown polypropylene filtration layer with bacterial filtration efficiency (bfe) of 95 to 99percentage, and an inner soft hydrophilic non woven layer for enhanced comfort. the mask shall be provided with high elastic soft ear loops and an integrated flexible plastic or aluminium nose clip to ensure a secure fit and minimize leakage, suitable for protection against dust and airborne particles during conservation and construction works, complete as approved by the engineer in charge., safety belt-- full-body harnesses (fbh) for fall arrest (dorsal d-ring), made from high-tenacity polyester and nylon webbing (min 44mm wide, 3mm thick) that withstands high tensile loads, featuring corrosion-resistant hardware, ergonomic padding, adjustable straps, and certifications like ce bis iso, ensuring comfort, proper fit, and critical fall-arrest force absorption for working at heights as per is 3521. (the material sample approval should be taken from the office before supplying), hammer 2kgs head with handle - head is hardened and tempered, typically ranging from hrc 48 to 58 for optimum toughness and to prevent shattering. square, double-faced, or hexagonal head with flat striking surfaces, handel made up of high-quality hardwood. two-colour carbon fiberglass shaft designed to absorb shock and reduce hand fatigue., chisel made up of high grade alloy steel, chrome vanadium crv steel or carbon steel for high durability. induction hardened tips around hrc 63 to 65. bevel edged, flat or pointed edge. the material sample approval should be taken from the office before supplying., sharping charges of chisel 5nos x 2times providing sharpening charges for 5 numbers of chisels, each sharpened twice, using mechanical grinding equipment to restore the cutting edge and maintain the required sharpness, profile and temper suitable for stone dressing, brick cutting and conservation works, complete as directed by the engineer-in-charge., gunny bags supply of good quality bt will woven jute gunny bags conforming to is 12650 into 2018 (standard btwill) or is 16186 2014 (lightweight sacking), having nominal dimensions of 94 cm x57 cm or 112 cm x 67.5 cm, fabricated from natural jute fibre with 3ply heracles stitched safety seams, durable and free from defects, suitable for storage and transportation of construction materials and for use in curing works during conservation works, complete as approved by the engineer in charge, aluminium wire 90m coil supply of pvc insulated aluminium wire in 90 metre coil of approved size 7 bar 20, manufactured with high-quality aluminium conductor and durable pvc insulation, providing safe, reliable and efficient current flow with good heat resistance. the wire shall be lightweight, flexible and easy to installation , suitable for domestic, commercial and light electrical wiring applications, complete as approved by the engineer-in-charge, switch box 4 module, switch and socket supply of 4 module modular switch box manufactured from fr grade polycarbonate for surface mounting or galvanized iron gi sheet for flush mounting, measuring approximately 135 mm x 75 mm to 150 mm x 90 mm, suitable for accommodating up to 4 modular units comprising switches and sockets. the switches shall have a current rating of 6a bar 10a or 16a 20a 25a as required, with a voltage rating of 240to 250v ac, 50 hz, and the socket shall be 6a or 16a shuttered type with child safety mechanism. the switch box shall be durable, corrosion resistant and suitable for indoor electrical installations, complete as approved by the engineer in charge., bulb led 18w supply of 18 w led bulb suitable for operation on 220 to 240 v ac, 50 hz power supply, having a minimum luminous flux of 1620 to 1908 lumens with an efficacy of 90 to 106 lumens and w. the bulb shall have a power factor of not less than 0.90, colour rendering index cri of 80 ra, surge protection of 2.5 to 4 kv, and an average service life of up to 25,000 hours, suitable for energy efficient indoor illumination, complete as approved by the engineer in charge., pointing trowel supply of professional quality pointing trowel with 150 mm 6 inch long and 75to80 mm wide blade, manufactured from high carbon steel or hardened mild steel with rust-resistant coating and blade thickness of approximately 1.0to1.2 mm. the trowel shall be fitted with a pvc or thermoplastic rubber tpr soft-grip handle of approximately 120to125 mm length, securely attached with a welded or riveted tang, lightweight and durable, suitable for accurate pointing, joint finishing and application of lime mortar in conservation works, complete as approved by the engineer in charge., wire brush supply of heavy-duty wire brush having an overall length of approximately 250 to 300 mm, provided with 3 or 4 rows of hardened carbon steel or iron wire bristles, securely stapled or embedded in a durable hardwood or moulded pvc handle. the brush shall be sturdy, corrosion resistant and suitable for manual cleaning of stone and brick masonry surfaces, removal of loose mortar, dirt, biological growth, rust stains and other surface deposits during conservation works, complete as approved by the engineer in charge., coir brush supply of 10 inch coir fibre handle brush fitted with 100 percentage naturally processed unbleached brown coir fibre bristles of 63 to 76 mm length, densely packed for effective scrubbing, securely fixed to a seasoned hardwood or country wood ergonomic handle. the brush shall be resistant to water, diluted acids and lime wash, biodegradable and free from plastic components, suitable for cleaning stone and brick masonry surfaces, removal of loose dust, lime deposits and surface contaminants during conservation and restoration works, complete as approved by the engineer in charge., transportation of materials providing transportation of approved construction materials from the source of supply to the work site by suitable vehicles, including safe loading, unloading, handling and stacking, ensuring the materials are protected from damage, contamination and moisture during transit, complete as directed by the engineer-in-charge., 50mm dia and 5mm thick hollow ms pipe supply of 50 mm diameter and 5 mm thick mild steel (ms) hollow pipe conforming to is 1161 or is 4923, manufactured from low carbon steel by the electric resistance welded (erw) process or seamless construction, having a minimum yield strength of 240 mpa and tensile strength of 410 mpa. the pipe shall be supplied in standard lengths, true to size, straight, free from dents, cracks and surface defects, with black or hot-dip galvanized finish as specified, suitable for fabrication of grills, railings, fencing, supports and other structural components in conservation works, complete as approved by the engineer-in-charge, 2 nos ms steel 15mm thick inter lock chainage supply of 2 numbers of mild steel ms interlocking chainage plates, manufactured from 15 mm thick ms plates conforming to is 2062 grade e250 a andb, precision cut by laser or cnc process and provided with accurately machined interlocking arrangement for secure and slip free coupling. the plates shall have a minimum yield strength of 250 mpa and tensile strength of 410 to 540 mpa, with high visibility engraved or punched chainage markings as per approved drawings, suitable for alignment, chainage marking and structural applications in conservation works, complete as approved by the engineer in charge, supply of synthetic enamel paint based on modified alkyd resin, having a high gloss finish minimum 85 percentage at 60 degree angle, with 40to 45percentage volume solids and suitable viscosity for brush, roller or spray application. the paint shall provide a dry film thickness of 20 to 35 microns per coat with a theoretical coverage of 10 to 15 m square per litre per coat, and shall be compatible with approved enamel thinners. it shall possess good adhesion, flexibility, resistance to moisture, water, oils, mild industrial fumes and intermittent salt spray and suitable in conservation works, complete as approved by the engineer in charge, carriage of rubbish item providing carriage of rubbish, debris, dismantled materials and other unserviceable waste generated during conservation works from the work site to an approved disposal location by suitable means of transport, including safe loading, unloading and disposal in accordance with local regulations, ensuring the monument premises are kept clean and free from obstructions, complete as directed by the engineer-in-charge.
Agency / Dept :
archaeological survey of india ASI
Due Date :
Sep 11, 2026
Tender Value :
34.41L
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Low Temperature Gloves. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Low Temperature Gloves sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Low Temperature Gloves Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Low Temperature Gloves, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Low Temperature Gloves Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Low Temperature Gloves Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Low Temperature Gloves.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Low Temperature Gloves depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Low Temperature Gloves Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Low Temperature Gloves bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Low Temperature Gloves. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Low Temperature Gloves, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Low Temperature Gloves, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Low Temperature Gloves?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Low Temperature Gloves tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Low Temperature Gloves?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Low Temperature Gloves, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Low Temperature Gloves is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All