sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

59Latest Knife switch Tenders List

Latest Knife switch Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Knife switch tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Knife switch tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Knife switch Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Knife switch tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Knife switch Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Knife switch Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Knife switch Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Knife switch tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Knife switch Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Knife switch sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Knife switch tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Knife switch tenders.

Is EMD mandatory for all Knife switch tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Knife switch work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Knife switch tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Knife switch Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17564428
Location : jamkandorna , gujarat
Source : GEM Tenders
NEW TENDER
tender for screwdriver insulated , suspension type insulator , brake test arrangement , thermometer digital , knife switch dpdt fitted with fuse terminals , knife switch tpdt fitted with fuse terminals , rheostat , bus bar with brackets , rcc pole with accessories , digital multi meter , ac ammeter mi, analog, portable box type housed in bakelite case 0 - 1 a , digital wattmeter 230 v, 1 kw, 50 hz , a.c. energy meter single phase, 10 a, 240 v induction type , a.c. energy meter three phase, 15 a , 440 v induction type , tong tester , wheat stone bridge , growler , resistance type starter , star delta starter-soft starter , auto transformer type starter , function generator , a.c. ceiling fan and ac table fan , washing machine semi-automatic 5 kg , inverter with battery , battery charger , a.c. series type motor , single phase capacitor motor , manual motor coil winding machine with step arbor , stepper motor with digital controller , shaded pole motor fractional , v-block pair with clamps , wooden handle forged soldering iron copper bit , punching tool for rj45 socket with cat-5 cable, electrical tools and equipment, 4mm x 150 mm, diamond head, suspension type insulators including hardware fitting, 0 to 25 kg, 0 degree c - 150 degree c, 16 amp - 440 v, 16 amp- 440 v, ohm, 10amp, bus bar with brackets 1 mtr each, rcc pole with accessories (ms angle iron c clamp stay insulator etc.)and materials 6 mtr, dc 200mv-1000v0-10a ac 200mv-750v 0-10a resistance 0-20 m and 3.5 digit, mi, analog, portable box type housed in bakelite case 0 - 1 a, 230 v, 1 kw, 50 hz, 10 a, 240 v induction type, 15 a , 440 v induction type, 0 - 100 a (digital type), wheat stone bridge with galvanometer and battery, 230 v, 50 hz, single phase, adjustable jaws, testing armature with ampere meter and testing probes., for a.c motors of 2 to 5 h.p., 2 to 200 khz, sine, square, triangular 220 v, 50 hz, single phase, 68-watt, 230 v, semi-automatic 5 kg, 1 kva with 12 v battery input- 12 volt dc, output- 220 volt ac, 0 - 6 - 9 - 12 - 24 - 48 v, 30amp, 1 hp, 240 v, 50 hz, manual motor coil winding machine with step arbor, stepper motor with digital controller, 240 v, 50 hz, 150 x 100 x 100 mm, 230v, 250 w, 350 gm, punching tool for rj45 socket with cat-5 cable
Agency / Dept :
department of employment and training DET
Due Date :
Oct 26, 2026 (24 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17323554
Location : tiruchirappalli , tamil nadu
LIVE TENDER
tender for isolating (battery knife) switch, isolating (battery knife) switch 200 v dc, rating:- 200 amps dc , voltage :-200 v, to blw part.no.12141082 & drawing no.el/pt/0 621 alt r3. - warranty period: 30 months after the date of delivery
Agency / Dept :
southern railway SR
Due Date :
Oct 14, 2026 (12 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17470808
Location : anand , gujarat
Source : GEM Tenders
LIVE TENDER
tender for tools equipment boq bid hammer cross pein 220 grams or 250 grams or 0.5 lb with handle , chisel cold flat 25 mm x 200 mm , allen key set - hexagonal - 1 - 12 mm, set of 12 keys , bradawl 150 mm x 6mm square pointed , mallet hard wood 0.50 kg. , hacksaw frame fixed type 150 mm , plier flat nose length 200 mm insulated , drill hand brace 0 to 100 mm , plane- jack 200 mm x 50 mm , plane smoothing, metal 200 mm x 50 mm cutter , cut out relays , reverse current relays , under voltage relays , knife switch dpdt fitted with fuse terminals 16 amp , knife switch tpdt fitted with fuse terminals16 amp , d.c. starters-4-points for 2.5 kw dc motor , ac starter resistance type starter , electric iron 1200 w, 230 v with temprature control. , immersion heater 1500 w -230 v , mixture or mixer grinder 750 w, 240 v , voltage stabiliser input 150 to 230 volt ac, output 220 volt ac , anvil 50 kgs , tong flat.200 mm long , simple machines screw jack with accessories , thermocouples j k r s b type each , steam generator copper for steam distilation. cap 1000 ml , searles apparetus for youngs modulus , redwood viscometer , test tube holders , caliper inside spring type. 150 mm , caliper hermaphrodite spring type 150 mm , scriber 150 mm , dot punch 100 mm , file knife edge smooth 150 mm , machine reamer parallel helical flute 12 to 16 mm set of 5 , scraper half round 150 mm , chisel cold crosscut and diamond point 9 mm x 150 mm , chisel cold round nose 9 mm x 100 mm , fire buckets with stand , power tools for fastening capacity 10 to 18mm , pipe threading die with handle ratchet type die head of one by two inch, three by four inch, one inch complete set , planishing hammer , engineers try square knife edge 150 mm blade , cut section gate valve 2 inch , cut section globe valve 2 inch , cut section safety valve 2 inch , cut section needle valve 25 mm cut section made up s.s. of 2 inch , cut section butter fly valve 2 inch , cut section non return valve 2 inch , cut section pneumatically operated diaphragm valve 2 inch , cut section ball valve 2 inch , cut section diaphragm valve 2 inch , cut section model of screw pump , vane pump cut section sliding type , cut section model of reciprocating pump , cut section of gear box planetary bevel gear type , cut section model of centrifugal pump back pullout type , scraper flat 250mm handled , knife electrician d.b. , screw driver set set of 5 100 to 300 mm , conduit pipe cutting and threading machines adjustable for 15 mm to 30 mm , hot wire ammeter 0 to 15 amps , wheatstone bridge , autotransformer 250v 10a , solid state solar based single phase energy meter bidirectional 5 to 30 amps 240 volts , magnetic flux meter 0 to 500 tesla , small crimping tools assorted 10 to 100 mm 5 nos , motion detector , soft starter 1 ph , field regulator 0 - 1000 ohmic, 2 amps , dmx controller , rewinding machine, hammer cross pein 220 grams or 250 grams or 0.5 lb with handle, chisel cold flat 25 mm x 200 mm, allen key set - hexagonal - 1 - 12 mm, set of 12 keys, bradawl 150 mm x 6mm square pointed, mallet hard wood 0.50 kg., hacksaw frame fixed type 150 mm, plier flat nose length 200 mm insulated, drill hand brace 0 to 100 mm, plane- jack 200 mm x 50 mm, plane smoothing, metal 200 mm x 50 mm cutter, cut out relays, reverse current relays, under voltage relays, knife switch dpdt fitted with fuse terminals 16 amp, knife switch tpdt fitted with fuse terminals16 amp, d.c. starters-4-points for 2.5 kw dc motor, ac starter resistance type starter, electric iron 1200 w, 230 v with temprature control., immersion heater 1500 w -230 v, mixture or mixer grinder 750 w, 240 v, voltage stabiliser input 150 to 230 volt ac, output 220 volt ac, anvil 50 kgs, tong flat.200 mm long, simple machines screw jack with accessories, thermocouples j k r s b type each, steam generator copper for steam distilation. cap 1000 ml, searles apparetus for youngs modulus, redwood viscometer, test tube holders, caliper inside spring type. 150 mm, caliper hermaphrodite spring type 150 mm, scriber 150 mm, dot punch 100 mm, file knife edge smooth 150 mm, machine reamer parallel helical flute 12 to 16 mm set of 5, scraper half round 150 mm, chisel cold crosscut and diamond point 9 mm x 150 mm, chisel cold round nose 9 mm x 100 mm, fire buckets with stand, power tools for fastening capacity 10 to 18mm, pipe threading die with handle ratchet type die head of one by two inch, three by four inch, one inch complete set, planishing hammer, engineers try square knife edge 150 mm blade, cut section gate valve 2 inch, cut section globe valve 2 inch, cut section safety valve 2 inch, cut section needle valve 25 mm cut section made up s.s. of 2 inch, cut section butter fly valve 2 inch, cut section non return valve 2 inch, cut section pneumatically operated diaphragm valve 2 inch, cut section ball valve 2 inch, cut section diaphragm valve 2 inch, cut section model of screw pump, vane pump cut section sliding type, cut section model of reciprocating pump, cut section of gear box planetary bevel gear type, cut section model of centrifugal pump back pullout type, scraper flat 250mm handled, knife electrician d.b., screw driver set set of 5 100 to 300 mm, conduit pipe cutting and threading machines adjustable for 15 mm to 30 mm, hot wire ammeter 0 to 15 amps, wheatstone bridge, autotransformer 250v 10a, solid state solar based single phase energy meter bidirectional 5 to 30 amps 240 volts, magnetic flux meter 0 to 500 tesla, small crimping tools assorted 10 to 100 mm 5 nos, motion detector, soft starter 1 ph, field regulator 0 - 1000 ohmic, 2 amps, dmx controller, rewinding machine
Agency / Dept :
department of employment and training DET
Due Date :
Oct 08, 2026 (6 days left)
Tender Value :
4.95L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17314786
Location : ankleshwar , gujarat
Source : GEM Tenders
LIVE TENDER
tender for procurement of electrical items whetstones bridge , resistance box 0 to 500 ohm , resistance coils 5 ohms, 10 ohms, 50 ohms, 100 ohms , laser light pen , ammeter able to read upto 300 a , continuity tester , resistance coil 2 ohm, 5 ohm, 10 ohm, 100 ohms , ammeter dc with external shunt , growler , single phase capacitor motor with starter switch , manual motor coil winding machine , stepper motor with digital controller , shaded pole motor , smart meter , analog components trainer , screw driver insulated , electrician screw driver thin stem insulated handle , heavy duty screw driver insulated , electrician screw driver thin stem insulated handle , electrical symbol and accessories charts , portable electric drill machine , wire stripper adjustable length , multi meter analog , earth electrode , trolley for transportation of batteries , magnetic flux meter , ammeter mc 0-1a , ammeter mccentre zero 0-20a , ammeter mccentre zero 0-50a , digital wattmeter , dc pump , pwm controller , cut out relays , reverse current relay , under voltage relay , insulators including hardware fitting , hand drill machine , brake test arrangement with two spring balance rating , laboratory type induction coil , series test lamp , knife switch dpdt fitted with fuse terminals , milli voltmeter , ammeter mc analog, portable box type housed in bakelite case , tachometer , wheat stone bridge with galvanometer and battery , single phase variable auto transformer , a. resistance type starter , f. star delta starter-- soft starter , g. auto transformer type , discrete component trainer , i. motor pump set , a.c. series type motor , wiring board , electrician knife 100 mm, as per atc
Agency / Dept :
department of employment and training DET
Due Date :
Oct 05, 2026 (3 days left)
Tender Value :
4.95L
View Documents
T18 Ref No : 17494772
Location : ahmedabad , gujarat
Source : GEM Tenders
LIVE TENDER
tender for tools equipment and machinery - bearing puller set , cut out relays , brake test arrangement , bus bar with brackets 1 mtr , rcc pole , energy meter 3 ph440v , wheatstone bridge complete with galvanometer and battery , variable auto transformer , ac starter resistance type starter , star delta strater soft starter , auto transformer type starter , function generator , discrete component trainer , motor ac single phase 230 v series type , single phase capacitor motor , coil winding machine manual , shaded pole motor fractional hp, 240 v, 50 hz , wiring board on stand , anvil with stand , circlip pliers expanding and contracting 150 mm , circlip pliers expanding and contracting 200 mm , different type of engine bearing model , different type of piston model , engineers stethoscope , growler , injector multi hole type , injector pintle type , left cut snips , piston ring expander and remover. , radiator pressure cap , right cut snips , rivet sets snap and dolly combined , scraper flat , spanner t. flocks for screwing up and upscrewing inaccessible , water pump for dismantling and assembling , pneumatic rivet gun with accessories , plumb bob 115 grams , wheatstones bridge , solid state solar based single phase energy meter , rawl punch holder and bits , a. cut out relay , b. reverse current relay , c. over current relay , d. under voltage relay , knife switch tpdt fitted with fuse terminals , earth electrode primary electrode 2100x28x3.25 mm secondary cu strip 20x5mm , capacitors electrolytic , capacitors ceramic , capacitors polyster film , capacitors variable , capacitors dual run , bus bar with brackets 1 mtr each , solar street light lamp 12v 18 or 24 watts , d.c. shunt motor , dmx controller , caliper hermachrodite.spring type 150 mm , file flat 2nd cut safe edge 300 mm , lapping plate , jigs and fixture sample for demonstration , drift drill 200 mm, 100-300mm for extracting both outer and inner races with box containing, cut out relays, two spring balance of 0 to 25 kg, 1 mtr, with accessories 6 mtr, 3 ph 440 v 15 a 4 wire induction type, wheatstone bridge complete with galvanometer and battery, 0 - 270v 5a -10a single phase, for 3 phase 400 v 50 cycles 2 to 5 h p ac motors, for 3-phase, 400 v 50 cycles 2 to 5 hp ac motors, for 3-phase 400 v 50 cycles 2 to 5 hp ac motors auto transformer type starter, 2 to 200 khz, sine, square, triangular 220 v 50 hz single phase, for diode and transistor circuit with regulated power supply +5,0- 5 v,+12 ,0-12 v, 50 cycles series type with starter with switch 1 hp, single phase capacitor motor 1 hp 240v 50hz with starter switch, manual motor coil winding machine with step arbor, fractional hp 240 v 50 hz, 3 meters x 1meter with 0.5 meter projection on the top, 50 kgs, expanding and contracting 150 mm, expanding and contracting 200 mm, different type of engine bearing model, different type of piston model, engineers stethoscope, growler, injector multi hole type, injector pintle type, 250 mm, piston ring expander and remover., radiator pressure cap, 3 mm, 4 mm, 6mm, 250mm, spanner t. flocks for screwing up and upscrewing inaccessible, water pump for dismantling and assembling, pneumatic rivet gun with accessories, 115 grams, wheatstones bridge, bidirectional 5 to 30 amps 240 volts, (no. 8,10,14 &16) set, 16a, 440v, 360v- 440v, 16 amp/440 v, earth electrode primary electrode 2100x28x3.25 mm, secondary cu strip 20x5mm, capacitors electrolytic, capacitors ceramic, capacitors polyster film, capacitors variable, capacitors dual run, different type 1 mtr each, 12v 75ah battery 75 wp solar panel, 3 h.p 250 v with 3 point starter and speed regulator (laboratory type), dmx controller, 150 mm, 300 mm, 6 inch dia, jigs and fixture sample for demonstration, 200 mm hardened and black finish
Agency / Dept :
department of employment and training DET
Due Date :
Oct 10, 2026 (8 days left)
Tender Value :
4L
View Documents
T18 Ref No : 17460286
Location : dhandhuka , Gujarat
Source : GEM Tenders
LIVE TENDER
tender for set of rowel punch , ammeter , solid state solar based 1ph energy meter , single phase kwh meter analog , 3 phase kw meter , magnetic flux meter , conduit pipe cutting and threading mc. adj , bar magnet , wiring board on stand , set of wall jumper octagonal , rawal tool holder and bit , foot print grip , contactor and contacts 3 , relay , relay- over current , insulators including hardware fitting , knife switch dpdt fitted with fuse terminals , knife switch tpdt fitted with fuse terminals , earth electrode primary electrode , earth electrode secondary cu strip , bus bar with brackets , electrician helmet , solar charge controller with manual switch day lighting , soft starter , field regulator , d.c. shunt motor , dmx controller , demonstration table , scriber , different type of engine bearing model , radiator pressure cap , multi angle magnetic clamp set , welding helmet , anvil , stud extractor ezy - , power tools for fastening , jigs and fixture sample , hollow punch , bearing different types , snip bent left cut , cut-section models for hydraulic components , knife electrician d.b. , spanner set de set of 6, supply of tools and equipment for iti boq, 8, 10 mm, mc 0 500 ma, bidirectional 5-30 amps, 240 volts, 5a, 250 v ac, 15a, 440 v, 0-500 tesla, for 15mm to 30mm, -, 3 meter x 1 meter with 0.5_x000D_ meter projection on the top, 37mm x 450mm and 37 x 600mm, no. 8, 10, 14, and 16, 250 mm, phase, 415 volt, 25 amp with 2 no_x000D_ and 2 nc, 16a, 440v, egg type, suspension type, 16 amp, 16 amp 440 v, 2100x28x3.25mm, 20x5mm, 1 mtr each, yellow colour, 6v,5 a, 1 ph, 0 - 1000 ohmic, 2 amps, 3 h.p 250 v with 3 point starter and_x000D_ speed regulator laboratory type, 2.5 x 1.25 x 0.75 m
Agency / Dept :
department of employment and training DET
Due Date :
Oct 13, 2026 (11 days left)
Tender Value :
2.46L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17349328
Location : dhandhuka , Gujarat
Source : GEM Tenders
LIVE TENDER
tender for supply of raw materials for iti boq wire wound variable resistor , g.i bend , g.i pipe , copper lug , terminal pad connector , fixed resistor , ac to dc adapter , aluminium lug , bare conductor copper , capacitor , capacitors for demo , cardboard , cat cable , cfl display spotlight , cfl lamp , coaxial cable , countersink bit , dmx controller , double-pole switch , dpst knife switch , drill bit for rcc , earth clamp copper , electrolytic capacito , ferrule , g.i bare conductor , g.i clamp , gi cable tray , hard wood , hpmv lamp fitting , hpsv lamp fitting , iron filings , led red,yllow, blue and green , led downlight , led bulb , led light , led lamp holder , modular gang box , modular switch , pvc insulated cable , patch cords red yellow blue black , potentiometer , potentiometer , pushbutton switch , pvc adhesive tape , pvc insulated coper wire , pvc saddles , pvc insulated flexible copper wire red, yellow, blue, green, and black , pvc junction box , pvc raceways , pvc light , pvc saddle 19mm , pvc empire sleeve , rcc drill bit , resin-cored solder , resistor , resistor , resistor , resistors , cable connector , connector , sandpaper oo grade , soft iron piece , spade connector lug , split bolt connector , spst knife switch , super enamelled copper wire , teak wood or any hard wood , teak wood or any other wood , teak wood plank , terminal lug board , terminal post , toggle switch, spst, , transperent sheet of plastic, , water rheostat - , wire wound resistor , wood drill bit , xlpe heat shrink cable joint kit , infrared motion detector sensor , electronic sequential control circuit , exhaust fan , emery paper , auxiliary drain , automatic tap sensor , automatic charge controller , carbon resistor , cable entry plate , brass cable gland , double compression cable gland for , cable gland - single compression for , cable jointing kit , various types of cable trays , cable bus assembly , cable lug aluminium , grommet , touch based s switch and r control , transistor , transformer , diode , draw spring , smart module or device for , cable gland , pcb , plywood sheet , plywood , aluminium ferrule , cable gland , fluorescent tube , fluorescent tube fitting , fluorescent tube starter , bulb with holder , ball bearings , metal halide lamp fitting , round block , various types of raise ways , remote control switching system for , low-voltage track light , different types of kitchen lighting , sensors for various types of bathroom lighting , shower hand sensor , solder wire , split cable plate enclosure , battery for remote , cable tie, 10kw 1w, 12.5 mm, 4 mm, 4 way, 5kw 1w, 12v 1.5a, 2.5 mm, 8 swg, 400v ac 4 mfd, assorted values and different voltage ratings, a4(r48) size, -, 15 w/240v, 18 w, 6 to 10mm, 512, 250v,6a, 16a/250v, 4,5,6,8,10mm, 6 by 1 inch, 1mfd, 2mfd, 4mfd,8mfd 400v, 4mm, 10mm long, 14 swg, 19 mm, 12 inch, 340 by 200 by 30mm for sawing machine, 150 w, 5mm, 3v, 15w/240v, 9w, 250v, 12v dc, 5w, with pvc cap, 1 modular, 2 modular, 3 and 4 modular, 1 way 5a, 2 way, type indicating light - red, 3 by 20 of 660 v grade, 4mm 1 meter length, 100 k ohm, 500 ohms, 0.5a, 250v, 6a, 1.5sq mm, 1 sq mm, 2.5sq mm, 50mm, 0.5 sq. mm, 3 and 4 way, 2 inch, 54 x 3 w - 60 - 350 w, 2mm 30,40,50mm diameter 100mm long, 4mm, 6mm, 8mm, 0.48ohms 250w, 1 giga ohm and 1 ohm, 10 ohms and 22 ohm 1 w, 20 ohms,2w, 10, 20, 50 ohms 5 watts, 1k, 2.2k,3.3k, 4.7k, rg-6, rj-45, 9 sq.cm, 22 mm dia 75 mm long with hook on one end, 4mm, 6mm, 22swg, 260by35by30mm and 295by35by30mm, 300by60by25 for planning practice and t joint, 275by130by25mm and 275by190by25mm, 6 to 15 lugs, 2.5mm, 16a, 1amp, a4 size 3mm thick, 100ohm 1.5a and 500ohm 0.5a, 1 to 12mm, 15 sq mm, 360-degree, 4-channel, for the kitchen, smooth, (automatic hand dryer), 12v, 10a, 1/4w, 82 ohm, 100 mf 50 v, 8inch x 4inch, 32mm, 25 sq mm cable, 25 sq mm cable, with resin compound, 25 sq mm, 3module 6a 240v, bc-547, 230v 6-0-6v, 230v 6v, 1n4007, 10 meters, 3 lamps + 1 fan (4-module), 240 v., nylon pvc, 4inch x 4inch, 9 mm x 1 x 1, 800 x 800 x 19 mm, 50 sq mm, flange-type, 40 w, 12v 21w dc, 12v 35w dc, 12v 6w dc, 6202, 6203, 150w, 2.5inch x 1inch, 470 ohm 1by2 w, lights and fans, with a remote control unit., 1-lamp set., 4 x 6, aaa, 12-inch
Agency / Dept :
department of employment and training DET
Due Date :
Oct 03, 2026 (1 day left)
Tender Value :
1.23L
View Documents
T18 Ref No : 17349329
Location : botad , gujarat
Source : GEM Tenders
LIVE TENDER
tender for elcrtical tools equipment boq allen keys set complete , auto transformer , bearing puller , blow lamp , bus bar with brackets , clipon clamp ammeter , contactor , cordless drilling machine , crimping tool , drilling machine electric , electric soldring iron , foot print grip , forge -portable hand blower , frequency meter , guage- wire imperial standard , hammer ball pein , insulator egg type , insulator pin type , insulator shackle types , insulatorsuspension type , knife double bladed , knife switch dpdt fitted with fuse terminals , knife switch tpdt fitted with fuse terminals , ladder -portable extension , ladder - tower , magnet - horse shoe , magnet - permanent bar , magnetic flux meter , megger cum continuity tester or insulation tester , meter reading instrument mri , micrometer outside , motion detector , multi fuction meter , multimeter , neon tester , plastic welding machine with hot air gun , plier combination insulated length , pliers round nose , rawl punch holder and bits , rubber gloves , safety belt , safety helmet - yellow colour , scissors , screw driver , screw driver insulated , solar charge controller with manual switch , solar panels , solar street light dismountable , solar traffic light , solid state solar base single phase energy meter , steel tape , tachometer , three phase kwh meter energy meter , three phase power factor meter , vernier caliper outside , wall jumper octagonal , wire cutter and stripper , wiring board on stand, (metric), 250v, 0-300v, 10a, inside three legs, outside three legs, 1 litre, 1 mtr, 0-25 amp,0-200amp, 3 phase,440 volt,16 a with nc auxiliary contacts, 850w, 1815 rpm, 18v battery, 16 sq. mm to 95 sq. mm, for non insulated pin type lugs (16 sq mm), for tube type lugs(1 to 6 sq mm), portable 12 mm capacity, 60 watts 230v, 250 mm, 38 cm to 45 cm., 45 to 55 hz, 1-36 swg, 1.0 count, stainless steel, 1000 grams with handle, 500 grams with handle, including hardware fitting, electrician 100 mm, 16 amp, aluminium 6 to 9 meters, 3 meters on tyre wheels - min 10ft - max. 30ft, 2 inch, 15 cms, 10gs range 0-2500 mt, 500 volts, ram ( ddr2 ) 256mb ,nand flash 512mb,micro sd card -32gb, 5000mah battery, 0 to 25 mm reading least count 0.01 mm (digital), 230v, (85-270v ac, 5a), 0 to 1000 m ohms 2.5 to 5000 volt, 5a / 250 v (electric testing screw driver), temperature display, variable temperature, pe, pp & pvc sheet or pipe control with stand accessories, 200 mm, (no. 8,10,14,16), 5000 volts, with provision for keeping tools, electrical, 200 mm heavy duty, set of 5 pieces 100 - 300 mm, 200 mm x 9 mm blade, 6 v 5 a ( day lighting), 250 wp, 15wp, 12v, 75ah battery, 75 wp solar panel, 12v, 10a dusk to dawn charge controller, 60 w led lights and 9 m height pole all, 12v, 75ah battery, 75 wp solar panel, 12v, 10a dusk to dawn charge controller, 15 w led lights with suitable colors and 9 m height pole all dismountable, 5-30amops,240v (bidirectional), 5 mtr flaxible in case, digital non contact 0 to 6000 rpm, digital, 25a 415v, 20 amp, 440 v, digital upto 300mm, 37mmx450mm, 37x600 mm, 150 mm, 3 meters x 1meter with 0.5 meter projection on the top
Agency / Dept :
department of employment and training DET
Due Date :
Oct 08, 2026 (6 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17370632
Location : dhandhuka , Gujarat
Source : GEM Tenders
LIVE TENDER
tender for supply of raw materials for iti boq wire wound variable resistor , g.i bend , g.i pipe , copper lug , terminal pad connector , fixed resistor , ac to dc adapter , aluminium lug , bare conductor copper , capacitor , capacitors for demo , cardboard , cat cable , cfl display spotlight , cfl lamp , coaxial cable , countersink bit , dmx controller , double-pole switch , dpst knife switch , drill bit for rcc , earth clamp copper , electrolytic capacito , ferrule , g.i bare conductor , g.i clamp , gi cable tray , hard wood , hpmv lamp fitting , hpsv lamp fitting , iron filings , led red,yllow, blue and green , led downlight , led bulb , led light , led lamp holder , modular gang box , modular switch , pvc insulated cable , patch cords red yellow blue black , potentiometer , potentiometer , pushbutton switch , pvc adhesive tape , pvc insulated coper wire , pvc saddles , pvc insulated flexible copper wire red, yellow, blue, green, and black , pvc junction box , pvc raceways , pvc light , pvc saddle 19mm , pvc empire sleeve , rcc drill bit , resin-cored solder , resistor , resistor , resistor , resistors , cable connector , connector , sandpaper oo grade , soft iron piece , spade connector lug , split bolt connector , spst knife switch , super enamelled copper wire , teak wood or any hard wood , teak wood or any other wood , teak wood plank , terminal lug board , terminal post , toggle switch, spst, , transperent sheet of plastic, , water rheostat - , wire wound resistor , wood drill bit , xlpe heat shrink cable joint kit , infrared motion detector sensor , electronic sequential control circuit , exhaust fan , emery paper , auxiliary drain , automatic tap sensor , automatic charge controller , carbon resistor , cable entry plate , brass cable gland , double compression cable gland for , cable gland - single compression for , cable jointing kit , various types of cable trays , cable bus assembly , cable lug aluminium , grommet , touch based s switch and r control , transistor , transformer , diode , draw spring , smart module or device for , cable gland , pcb , plywood sheet , plywood , aluminium ferrule , cable gland , fluorescent tube , fluorescent tube fitting , fluorescent tube starter , bulb with holder , ball bearings , metal halide lamp fitting , round block , various types of raise ways , remote control switching system for , low-voltage track light , different types of kitchen lighting , sensors for various types of bathroom lighting , shower hand sensor , solder wire , split cable plate enclosure , battery for remote , cable tie, 10kw 1w, 12.5 mm, 4 mm, 4 way, 5kw 1w, 12v 1.5a, 2.5 mm, 8 swg, 400v ac 4 mfd, assorted values and different voltage ratings, a4(r48) size, -, 15 w/240v, 18 w, 6 to 10mm, 512, 250v,6a, 16a/250v, 4,5,6,8,10mm, 6 by 1 inch, 1mfd, 2mfd, 4mfd,8mfd 400v, 4mm, 10mm long, 14 swg, 19 mm, 12 inch, 340 by 200 by 30mm for sawing machine, 150 w, 5mm, 3v, 15w/240v, 9w, 250v, 12v dc, 5w, with pvc cap, 1 modular, 2 modular, 3 and 4 modular, 1 way 5a, 2 way, type indicating light - red, 3 by 20 of 660 v grade, 4mm 1 meter length, 100 k ohm, 500 ohms, 0.5a, 250v, 6a, 1.5sq mm, 1 sq mm, 2.5sq mm, 50mm, 0.5 sq. mm, 3 and 4 way, 2 inch, 54 x 3 w - 60 - 350 w, 2mm 30,40,50mm diameter 100mm long, 4mm, 6mm, 8mm, 0.48ohms 250w, 1 giga ohm and 1 ohm, 10 ohms and 22 ohm 1 w, 20 ohms,2w, 10, 20, 50 ohms 5 watts, 1k, 2.2k,3.3k, 4.7k, rg-6, rj-45, 9 sq.cm, 22 mm dia 75 mm long with hook on one end, 4mm, 6mm, 22swg, 260by35by30mm and 295by35by30mm, 300by60by25 for planning practice and t joint, 275by130by25mm and 275by190by25mm, 6 to 15 lugs, 2.5mm, 16a, 1amp, a4 size 3mm thick, 100ohm 1.5a and 500ohm 0.5a, 1 to 12mm, 15 sq mm, 360-degree, 4-channel, for the kitchen, smooth, (automatic hand dryer), 12v, 10a, 1/4w, 82 ohm, 100 mf 50 v, 8inch x 4inch, 32mm, 25 sq mm cable, 25 sq mm cable, with resin compound, 25 sq mm, 3module 6a 240v, bc-547, 230v 6-0-6v, 230v 6v, 1n4007, 10 meters, 3 lamps + 1 fan (4-module), 240 v., nylon pvc, 4inch x 4inch, 9 mm x 1 x 1, 800 x 800 x 19 mm, 50 sq mm, flange-type, 40 w, 12v 21w dc, 12v 35w dc, 12v 6w dc, 6202, 6203, 150w, 2.5inch x 1inch, 470 ohm 1by2 w, lights and fans, with a remote control unit., 1-lamp set., 4 x 6, aaa, 12-inch
Agency / Dept :
department of employment and training DET
Due Date :
Oct 03, 2026 (1 day left)
Tender Value :
1.23L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17371022
Location : botad , gujarat
Source : GEM Tenders
LIVE TENDER
tender for elcrtical tools equipment boq - allen keys set complete , auto transformer , bearing puller , blow lamp , bus bar with brackets , clipon clamp ammeter , contactor , cordless drilling machine , crimping tool , drilling machine electric , electric soldring iron , foot print grip , forge -portable hand blower , frequency meter , guage- wire imperial standard , hammer ball pein , insulator egg type , insulator pin type , insulator shackle types , insulatorsuspension type , knife double bladed , knife switch dpdt fitted with fuse terminals , knife switch tpdt fitted with fuse terminals , ladder -portable extension , ladder - tower , magnet - horse shoe , magnet - permanent bar , magnetic flux meter , megger cum continuity tester or insulation tester , meter reading instrument mri , micrometer outside , motion detector , multi fuction meter , multimeter , neon tester , plastic welding machine with hot air gun , plier combination insulated length , pliers round nose , rawl punch holder and bits , rubber gloves , safety belt , safety helmet - yellow colour , scissors , screw driver , screw driver insulated , solar charge controller with manual switch , solar panels , solar street light dismountable , solar traffic light , solid state solar base single phase energy meter , steel tape , tachometer , three phase kwh meter energy meter , three phase power factor meter , vernier caliper outside , wall jumper octagonal , wire cutter and stripper , wiring board on stand, (metric), 250v, 0-300v, 10a, inside three legs, outside three legs, 1 litre, 1 mtr, 0-25 amp,0-200amp, 3 phase,440 volt,16 a with nc auxiliary contacts, 850w, 1815 rpm, 18v battery, 16 sq. mm to 95 sq. mm, for non insulated pin type lugs (16 sq mm), for tube type lugs(1 to 6 sq mm), portable 12 mm capacity, 60 watts 230v, 250 mm, 38 cm to 45 cm., 45 to 55 hz, 1-36 swg, 1.0 count, stainless steel, 1000 grams with handle, 500 grams with handle, including hardware fitting, electrician 100 mm, 16 amp, aluminium 6 to 9 meters, 3 meters on tyre wheels - min 10ft - max. 30ft, 2 inch, 15 cms, 10gs range 0-2500 mt, 500 volts, ram ( ddr2 ) 256mb ,nand flash 512mb,micro sd card -32gb, 5000mah battery, 0 to 25 mm reading least count 0.01 mm (digital), 230v, (85-270v ac, 5a), 0 to 1000 m ohms 2.5 to 5000 volt, 5a / 250 v (electric testing screw driver), temperature display, variable temperature, pe, pp & pvc sheet or pipe control with stand accessories, 200 mm, (no. 8,10,14,16), 5000 volts, with provision for keeping tools, electrical, 200 mm heavy duty, set of 5 pieces 100 - 300 mm, 200 mm x 9 mm blade, 6 v 5 a ( day lighting), 250 wp, 15wp, 12v, 75ah battery, 75 wp solar panel, 12v, 10a dusk to dawn charge controller, 60 w led lights and 9 m height pole all, 12v, 75ah battery, 75 wp solar panel, 12v, 10a dusk to dawn charge controller, 15 w led lights with suitable colors and 9 m height pole all dismountable, 5-30amops,240v (bidirectional), 5 mtr flaxible in case, digital non contact 0 to 6000 rpm, digital, 25a 415v, 20 amp, 440 v, digital upto 300mm, 37mmx450mm, 37x600 mm, 150 mm, 3 meters x 1meter with 0.5 meter projection on the top
Agency / Dept :
department of employment and training DET
Due Date :
Oct 08, 2026 (6 days left)
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Knife Switch. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Knife Switch sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Knife Switch Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Knife Switch, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Knife Switch Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Knife Switch Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Knife Switch.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Knife Switch depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Knife Switch Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Knife Switch bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Knife Switch. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Knife Switch, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Knife Switch, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Knife Switch?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Knife Switch tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Knife Switch?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Knife Switch, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Knife Switch is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All