sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

42Latest High vacuum pump Tenders List

Latest High vacuum pump Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right High vacuum pump tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win High vacuum pump tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time High vacuum pump Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize High vacuum pump tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of High vacuum pump Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in High vacuum pump Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for High vacuum pump Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All High vacuum pump tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of High vacuum pump Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the High vacuum pump sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily High vacuum pump tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new High vacuum pump tenders.

Is EMD mandatory for all High vacuum pump tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a High vacuum pump work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private High vacuum pump tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for High vacuum pump Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17570176
Location : thiruvananthapuram , kerala
Source : GEM Tenders
NEW TENDER
corrigendum tender for high vacuum pump (q3) ( pac only )
Agency / Dept :
indian space research organisation ISRO
Due Date :
Oct 10, 2026 (8 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17564442
Location : bhabhar , gujarat
Source : GEM Tenders
NEW TENDER
tender for scriber 150 mm double ended , hammer sledge double faced 4 kg , spindle key for opening cylinder valve , metal rack 1820x1210x450 mm , first aid box , multi angle magnetic clamp set - metal base 18x10x10 cm- , welding helmet auto darkening type , fire extinguisher soda acid foam type 7 ltr cap , power cutter electrically operated -portable abrasive cut off machine- , swagging and flooring tool kit 45 degree tubing 18 to 34 inch , ag 4 grinder , chuck drill 12 mm capacity with key , tailors card scale triangular , tailoring woodenplastic square , thread cutter 24 , rule - scale- plastic 2460 cm , patern notcher , stand wooden t shaped for hanging dress , electric steam iron 450750 watts 230 v with automatic heat control , machine attachmentzipper foot , machine attachmenttucker foot , machine attachmenthem folder , machine attachmentzigzag foot , glass show case for display of jobs 450 mmx600mmx850 mm , dress for dummies ladies 10 -half- , dress for dummies ladies 12 -full- , dress for dummiesgents 42-full- , electrician screw driver 250mm , philips screw driver set of 5 pieces 100 mm to 300 mm , spanner ring set of 12 6 to 32 mm -metric- , air ratchet with standard accessories , angle plate adjustable 250x150x175mm , cylinder bore gauge capacity 5 meters flexible in case 20 to 160 mm , cylinder liner dry and wet liner press fitand slidefit liner , fuel injection pump dismantling tool kit universal vice , hand shear universal 250mm , insulated screw driver 20 cmx9mm blade , insulated screw driver 30 cmx9mm blade , oil stone 15 cmx5 cmx25 cm , pipe flaring tool , piston ring groove cleaner , radiator cut sectiondown flow , radiator pressure cap, iti bhabhar tools equipment boq, 150 mm double ended, sledge double faced 4 kg, item spindle key for gas cylinder valve application for opening and closing gas cylinder spindle valves material forged carbon steel high strength steel construction heavyduty singlepiece profile square socket suitable for standard cylinder spindle finish chrome plated corrosion resistant length approx 100-150 mm operation easy and safe manual operation compatibility suitable for oxygen co2 argon and other industrial gas cylinders, type heavyduty mild steel ms storage rack overall size 1820x1210x450 mm material crca mild steel with powdercoated finish construction slotted angle boltless knockdown design no of shelves minimum 5 adjustable shelves shelf material ms sheet minimum 08to10 mm thick frame thickness minimum 18to20 mm load capacity minimum 100 kg per shelf -uniformly distributed load- surface finish epoxy polyester powder coating rust and corrosion resistant colour grey bluegrey accessories nuts bolts shelf supports and adjustable levelling feet, type wallmounted portable first aid box material mild steel -ms- abs plastic with powdercoated finish -ms type- size approx 300x240x100 mm -or equivalent- colour white with green cross marking construction sturdy body with hinged door and secure latchlock compartments multiple compartmentstrays for organized storage of first aid items mounting suitable for wall mounting with fixing accessories contents supplied with standard first aid contents as per relevant bisfactory requirements -bandages sterile gauze cotton adhesive tape antiseptic solution scissors safety pins disposable gloves burn dressing triangular bandage crepe bandage eye pad ors etc- application suitable for iti workshops, type multiangle magnetic welding clamp magnetic holder set base size approx 180x100x100 mm material heavyduty steel body with permanent ferrite rare earth magnet holding angles 30degree 45degree 60degree 75degree 90degree and 135degree -or equivalent multiangle capability- magnetic holding force minimum 22 kg -50 lbs- per clamp surface finish powdercoated rust and corrosion resistant application suitable for holding ferrous workpieces during welding soldering brazing pipe fitting fabrication and assembly compatibility suitable for flat round square and angle iron workpieces features strong magnetic grip quick positioning handsfree operation reusable easy to clean accessories supplied as a complete set ready for use warranty minimum 1 year against manufacturing defects, type auto darkening welding helmet helmet material highimpact heatresistant polyamidenylon viewing area minimum 90x35 mm optical class 1112 or better shade range din 9 13 -adjustable- light state din 4 power supply solar cell with replaceable lithium battery sensitivity and delay adjustable sensitivity and delay controls uvir protection permanent din 16 protection headgear adjustable ratchettype headband with tilt and size adjustment applications suitable for mma -arc- migmag tig welding plasma cutting and grinding mode standards conforming to en 175 en 379 ce or equivalent international standards warranty minimum 1 year against manufacturing defects, type portable soda acid mechanical foam fire extinguisher capacity 7 litres body material seamless mild steel -ms- cylinder with corrosionresistant epoxy powdercoated finish extinguishing agent soda acid mechanical foam as applicable operating pressure as per is standard working temperature 5degreec to 55 degree c -or as per manufacturer specification- discharge time minimum 30 seconds discharge range minimum 4 metres mounting supplied with wall mounting bracket accessories discharge hose nozzle operating lever pressure indicator -where applicable- safety pin with seal compliance conforming to is 15683 and manufacturedlicensed as per bis requirements suitable for class a and class b fire hazards -wood paper cloth rubber flammable liquids- warranty minimum 1 year against manufacturing defects, portable electrically operated abrasive cutoff machine 355 mm wheel 254 mm bore 2000 2400 w motor 3800 4100 rpm 220 240 v ac single phase with safety guard workpiece clamp and cutting wheel, type manual swaging and 45degree flaring tool kit flaring angle 45degree tube capacity 18 316 14 516 38 12 58 and 34 material hardened alloy steel yoke flaring bar and swaging adapters application suitable for copper aluminium brass and soft steel tubing flaring type single 45degree precision flare swaging tools complete set of swaging adapters for the specified tube sizes construction heavyduty forged steel yoke with hardened precisionmachined clamping bar accessories flaring bar yoke swaging punchesadapters tube cutterdeburringreaming tool and blowmoulded carrying case finish corrosionresistant black oxidechrome plated finish suitable for refrigeration airconditioning plumbing automotive and general workshop applications warranty minimum 1 year against manufacturing defects, type portable electric angle grinder -ag4- wheel diameter 100 mm -4 inch- rated power 850 1000 w no load speed 10000 12000 rpm spindle thread m10 power supply 220 240 v ac 50 hz single phase switch type slidepaddle switch with safety lock body ergonomic compact doubleinsulated housing accessories side handle wheel guard flange set spannerwrench user manual application suitable for grinding cutting deburring and surface finishing of metal and masonry warranty minimum 1 year against manufacturing defects, keytype drill chuck capacity 15 12 mm heavyduty hardened steel construction precision machined suitable for drilling machine complete with chuck key, triangular tailors card scale approx 30 cm length durable plastic construction clear permanent metric graduations in mm cm suitable for tailoring and garment patternmaking applications, tailoring square lshaped rightangle type made of durable woodplastic approx 12x12 inch with clear metricinch graduations accurate 90degree angle and smooth edges suitable for garment pattern making, thread cutter 24 inch -approx 600 mm- heavyduty manual type with sharp hardened steel blade and durable ergonomic handle suitable for tailoringtextile workshop use, plastic measuring rulescale 24 inch -600 mm- length durable plastic construction with clear and permanent metricinch graduations straight and smooth edges suitable for tailoring and workshop measurement, manual pattern notcher handoperated hardened steel cutting blade durable ergonomic handle suitable for making vu notches on paper and cardboard garment patterns for tailoring applications, wooden tshaped dress hanging stand made from good quality seasoned hardwood sturdy construction with stable base and smooth polished finish suitable for hangingdisplaying dresses and garments in tailoringiti workshop, electric steam iron 450 750 w 230 v ac single phase with automatic heat controladjustable thermostat steam function durable nonstickstainlesssteel sole plate and safety thermal protection suitable for tailoring workshop use, sewing machine zipper foot attachment durable metalalloy construction suitable for standard sewing machines designed for close and accurate stitching along zipper teeth suitable for tailoringgarmentmaking applications, sewing machine tucker foot attachment durable metalalloy construction suitable for standard sewing machines designed for making uniform and parallel tuckspleats in fabric suitable for tailoringgarmentmaking applications, sewing machine hem folder attachment durable metal construction suitable for standard sewing machines designed for uniform folding and stitching of fabric edges suitable for tailoring and garmentmaking applications, sewing machine zigzag foot attachment durable metalalloy construction suitable for standard sewing machines designed for zigzag decorative and general stitching of fabrics suitable for tailoringgarmentmaking applications, item glass showcase for display of jobs overall size 450x600x850 mmtype glass display showcase frame ms aluminium frame with durable finish glass clear toughenedtempered glass shelves minimum 2 3 adjustable glass shelves door lockable glass door base strong and stable base finish smooth corrosionresistant and easy to clean application display of trainee jobs models garments and finished work, ladies dress dummy halfbody type standard size durable fibreplastic body with suitable fabric covering for pinning sturdy construction suitable for garment draping pattern making fitting and display, ladies dress dummy fullbody type size 12 durable fibreabsplastic construction with fabric covering suitable for pinning mounted on sturdy adjustable stand with stable base suitable for garment draping pattern making fitting and display, gents dress dummy fullbody type size 42 durable fibreabsplastic construction with fabric covering suitable for pinning mounted on sturdy adjustable stand with stable base suitable for garment draping pattern making fitting and display, item electrician screwdriver overall length 250 mm type insulated electrician screwdriver material chrome vanadium highcarbon steel tip hardened precisionground handle insulated ergonomic nonslip insulation suitable for electrical work finish corrosionresistant application electrical installation maintenance and iti workshop use, item phillips screwdriver set quantity 5 pieces tip type phillips crosshead length range 100 mm to 300 mm blade material hardened chrome vanadium alloy steel tip precisionground hardened and corrosionresistant handle ergonomic nonslip impactresistant sizes assorted sizes suitable for general electricalmechanical work application electrical maintenance and iti workshop use accessories complete set supplied in suitable holdercase, item ring spanner set quantity 12 pieces type doubleend ring spanner size range 6 to 32 mm -metric- material chrome vanadium steel finish chrome plated corrosion resistant ring profile 6point 12point suitable for standard fasteners marking clearly marked size on each spanner application mechanical fitting maintenance and iti workshop use, item pneumatic air ratchet wrench drive size 12 inch -127 mm- square drive type airoperated pneumatic working pressure 63 bar -90 psi- approx free speed minimum 150 rpm torque minimum 60 nm air inlet 14 inch material heavyduty alloy steel body direction forwardreverse operation accessories standard socketaccessory set air hose connector and suitable case application automobile servicing mechanical maintenance and iti workshop use, item adjustable angle plate size 250x150x175 mm type adjustable tilting angle plate material highquality cast iron steel construction heavyduty rigid and stable adjustment adjustable angle with secure locking arrangement surface machinedground working surfaces finish corrosionresistant application marking fitting machining and workholding operations in iti workshop, item cylinder bore gauge measuring range 20 160 mm type flexible extension type flexible rodcable length approx 5 m accuracy suitable for precision internal bore measurement material hardened steel alloy steel components reading compatible with dial indicator suitable measuring head accessories standard measuring anvilsextension accessories and carrying case application measurement of cylinder bores in automobilemechanical workshop, item cylinder liner sleeve types dry liner and wet liner fit types press fit and slide fit material cast iron alloy cast iron construction precision machined and honed surface smooth uniform and corrosionresistant application automobile engine cylinderliner demonstration and practical training quantity as per requirement representative samples of each type, item fuel injection pump dismantling tool kit type universal heavyduty material chrome vanadium alloy steel application dismantling and assembly of fuel injection pumps tools pullers holding tools spanners sockets and suitable dismantling accessories storage supplied in study tool case use suitable for automobile diesel engine practical training, item universal hand shear length 250 mm type manual hand operated blade material hardened highcarbon steel blades sharp durable and precisionground handle strong ergonomic and nonslip cutting capacity suitable for light sheet metal cloth and general workshop materials construction heavyduty and durable application fitting sheetmetal and iti workshop applications, item insulated screwdriver overall length 200 mm blade diameter 9 mm type insulated electrician screwdriver blade material hardened chrome vanadium alloy steel handle ergonomic nonslip insulated handle insulation suitable for electrical work tip precisionground and hardened application electrical installation maintenance and iti workshop use, item insulated screwdriver overall length 300 mm blade diameter 9 mm type insulated electrician screwdriver blade material hardened chrome vanadium alloy steel handle ergonomic nonslip insulated handle insulation suitable for electrical work tip precisionground and hardened application electrical installation maintenance and iti workshop use, item oil stone sharpening stone size 150x50x25 mm type combination fine grade sharpening stone material aluminium oxide silicon carbide shape rectangular surface uniform flat and smooth application sharpening and honing of cutting tools chisels blades and hand toolsuse suitable for iti fittingworkshop applications, item pipe flaring tool type manual hand operated application flaring of copper aluminium brake pipes tube sizes approx 3 16 mm material hardened steel alloy steel flare type single and double flare construction heavyduty precision machined handle ergonomic nonslip accessories flaring bar yoke and suitable adapters application automobile refrigeration practical training, item piston ring groove cleaner type manual hand operated application cleaning carbon deposits from piston ring grooves material hardened alloy steel cutter adjustable interchangeable cutting blades groove sizes suitable for common automobile engine piston grooves handle ergonomic nonslip grip construction heavyduty and durable accessories interchangeable bladescutters with storage case application automobile engine servicing and iti practical training, item radiator cut section down flow type automotive radiator sectionalcutaway model construction metal radiator core with tanks flow type downflow type coolant flows from upper tank to lower tank cut section transparentopen cut section to show internal construction and coolant flow path components visible upper tank tubes fins lower tank and coolant passages mounting sturdy standbase finish durable corrosionresistant application demonstration of radiator construction cooling system operation and coolant flow in iti automobilemechanic motor vehicle practical training, item radiator pressure cap type automotive radiator pressure cap material stainless steel brass with heatresistant rubber seal pressure rating suitable for standard automotive cooling systems function maintains specified coolingsystem pressure and controls coolant overflow valve pressure relief and vacuum valve seal heatresistant leakproof gasket construction durable and corrosionresistant application automobile cooling system practical training and demonstration
Agency / Dept :
department of employment and training DET
Due Date :
Oct 15, 2026 (13 days left)
Tender Value :
2.52L
View Documents
T18 Ref No : 17442553
Location : rourkela , odisha
Source : GEM Tenders
LIVE TENDER
tender for 35210009004543 compressor capacity 1 5tr f r 32 , 35210009004544 compressor capacity 2 0 tr f r 32 , 51910209000018 thermostat water cooler type u50 2064 , 35210009001774 thermostat mm u 50 2059 , 35210009004690 single phase preventor f tower ac ma51bc , 35210009004694 compressor relay 220 230vac 4 7a , 60210859000873 pump high vacuum portable 230v 10 , 35210009004314 universal pcb with remote f split ac , 35210001000119 condenser coil f window ac 1 5t voltas , 71450007030205 valve pres relief f refrigerant 22 , 51010201251305 gauge pressure range 30 hg 0 150psi , 51010201251306 gauge pressure discharge range 0 300psi , 35210009004702 sensor coil temp 20 to 100deg 5k 100k , 35210009004703 sensor air temp 40 to 105 deg cent 10ma , 35210009004701 contactor single pole 25a 230v split ac , 35210009004132 condenser coil f ac 4501716 1 5t voltas , 35210009003878 o d unit fan motor cw 1 5t split ac 65w , 35210009004319 cooling coil washer 7 10bar 220v 4l min , 51910009000086 drier liquid line conn 5 8x5 8in flare , 35210009001803 compressor rotary sealed f 1 5t ac , 35210009003356 air cooled condenser f split ac cap 2tr , 35210009003879 o d unit fan motor ccw 1 5t split ac 65w , 35210009001806 runner impeller f a c cap 1 5t 7 5 8in , 50510401001675 capacitor 50mfd 5 440vac , 50510401001480 capacitor 2 5mfd 440vac 40to 85deg c , 50510401001485 capacitor 10mfd 5 500vac, room ac spares 123, refer specification sheet
Agency / Dept :
steel authority of india limited SAIL
Due Date :
Oct 05, 2026 (3 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17464709
Location : sampatchak , bihar
Source : GEM Tenders
LIVE TENDER
tender for control valve characteristics , calibration of thermocouple , dynamic response of the u tube manometer , interacting non interacting system , proportional p and proportional integral pi controllers for flow and level control , time constant of the stirred tank heater , temperature control trainer with computer system , pressure control trainer , p i i p convertor , capacitance method , nephelometer or turbidimeter , hot air oven , muffle furnace , jar test apparatus , high volume air sampler pm10 , fine particulate sampler pm2.5 , biochemical oxygen demand analyzer , cod reflux apparatus with cod digester , bomb calorimeter , biogas digester or anaerobic digester , melting point apparatus , ball mill , air compressor , oil free vacuum pump , ultra violet flourescene inspection cabinet, chemical science and technology laboratory equipment, specification of control valve characteristics, specification of calibration of thermocouple, specification of dynamic response of the u tube manometer, specification of interacting non interacting system, specification of proportional p and proportional integral pi controllers for flow and level control, specification of time constant of the stirred tank heater, specification of temperature control trainer with computer system, specification of pressure control trainer, specification of p i i p convertor, specification of capacitance method, specification of nephelometer orturbidimeter, specification of hot air oven, specification of muffle furnace, specification of jar test apparatus, specification of high volume air sampler pm10, specification of fine particulate sampler pm2.5, specification of biochemical oxygen demand analyzer, specification of cod reflux apparatus with cod digester, specification of bomb calorimeter, specification of biogas digester or anaerobic digester, specification of melting point apparatus, specification of ball mill, specification of air compressor, specification of oil free vacuum pump, specification of ultra violet flourescene inspection cabinet
Agency / Dept :
national institute of technology NIT
Due Date :
Oct 16, 2026 (14 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17314697
Location : chandigarh , chandigarh
Source : GEM Tenders
LIVE TENDER
tender for tata vehicle spare parts piston set , piston ring set , cylinder linner set , main bearing set 010 inch , big end bearing 010 inch , con rod bush , thrust washer , valve inlet and exhaust , valve guide inlet and exhaust , engine oh gaskit com with head gaskit b iv , valve oil seal inlet and exhaust , crank oil seal rear , heater plug , timing belt , oil pump assy , water pump assy , thermostate valve , temp sending unit , oil pressure switch , oil jet with packing , tensioner , fan belt alternator , fan belt power steering , clutch disc with pressure plate , clutch relese bearing , pilot bearing , tensioner timing belt , idler timing belt big , hla , crank sensor , cam sensor , rail pressure sensor , oil seal crank shaft front , air filter element , oil filter , fuel filter , o ring injector , leak of rail injector , high pressure pump fip , injector , concentric slave cylinder , suction unit assy fuel pump and gauge , turbo charger assy , idler timing belt small , parking brake cable comp , assy lower link with bush , front shock absorber , rear shock absorber , engine mounting assy , gear liver bush kit , wiper blade , front brake disc pad , rear brake disc pad , parking brake shoe , bonet cable and lever , wheel nut , front door lock lh , rear door lock , hub cap front , foot mat set , clamp all type , injectior coupler , tie rod end set , clutch master cylinder , solenoid switch self , carbon brush plate self , gun matel bush self , alternator cut out , main bearing set , big end bearing , assy rff and hla dicor , injector washer copper , heater plug coupler , fuel return pipe injector to fip , vacuum pump , vacuum pump packing , crank gear , vibration dumper assy , coolant hoses , clutch slave cylinder with bleeder , cartradge fuel filter , head light assy lh , head light assy rh , rain visor , packing paper , bonnet shocker , rear wheel cap , front wheel cap , ac filter , pipe assy clutch hydraulic line clutch master to slave cylinder pipe , fuse box assy battery mounted , fuel injector , fuel pump assy , clutch slave cylinder , clutch pressure plate , fan belt 5pk , fan belt 6pk , fuel return pipe , gear lever kit , steering uj cross , drain nut , fuel filter assy fine filter 12 volt , fuel filter assy protect filter 12 volt , oil filter bs 6 , air filter element primary , air filter element safety , grease nipple , t monogram, piston set, piston ring set, cylinder linner set, main bearing set 010 inch, big end bearing 010 inch, con rod bush, thrust washer, valve inlet and exhaust, valve guide inlet and exhaust, engine oh gaskit com with head gaskit b iv, valve oil seal inlet and exhaust, crank oil seal rear, heater plug, timing belt, oil pump assy, water pump assy, thermostate valve, temp sending unit, oil pressure switch, oil jet with packing, tensioner, fan belt alternator, fan belt power steering, clutch disc with pressure plate, clutch relese bearing, pilot bearing, tensioner timing belt, idler timing belt big, hla, crank sensor, cam sensor, rail pressure sensor, oil seal crank shaft front, air filter element, oil filter, fuel filter, o ring injector, leak of rail injector, high pressure pump fip, injector, concentric slave cylinder, suction unit assy fuel pump and gauge, turbo charger assy, idler timing belt small, parking brake cable comp, assy lower link with bush, front shock absorber, rear shock absorber, engine mounting assy, gear liver bush kit, wiper blade, front brake disc pad, rear brake disc pad, parking brake shoe, bonet cable and lever, wheel nut, front door lock lh, rear door lock, hub cap front, foot mat set, clamp all type, injectior coupler, tie rod end set, clutch master cylinder, solenoid switch self, carbon brush plate self, gun matel bush self, alternator cut out, main bearing set, big end bearing, assy rff and hla dicor, injector washer copper, heater plug coupler, fuel return pipe injector to fip, vacuum pump, vacuum pump packing, crank gear, vibration dumper assy, coolant hoses, clutch slave cylinder with bleeder, cartradge fuel filter, head light assy lh, head light assy rh, rain visor, packing paper, bonnet shocker, rear wheel cap, front wheel cap, ac filter, pipe assy clutch hydraulic line clutch master to slave cylinder pipe, fuse box assy battery mounted, fuel injector, fuel pump assy, clutch slave cylinder, clutch pressure plate, fan belt 5pk, fan belt 6pk, fuel return pipe, gear lever kit, steering uj cross, drain nut, fuel filter assy fine filter 12 volt, fuel filter assy protect filter 12 volt, oil filter bs 6, air filter element primary, air filter element safety, grease nipple, t monogram
Agency / Dept :
indo tibetan border police ITBP
Due Date :
Oct 03, 2026 (1 day left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17423458
Location : songadh , gujarat
Source : GEM Tenders
LIVE TENDER
tender for dc.output 0_1250v variable by helipot with locking dial. max current 1ma.npcil spec pc_e_433 for high range area radiation monitor.make ecil , pre amplifier. npcil specification_pc_e_433 for high range area radiation monitor. make ecil , signal processing unit. npcil specification pc_e_433 for high range area radiation monitor. make ecil , detectors low range lnd 7121. npcil specification pc_e_432 for low range area radiation monitors. make ecil , detectors high range lnd 723. npcil specification pc_e_432 for low range area radiation monitors. make ecil , low voltage power supply_lvps_module. input 220v dc_ output 12v_negative 12v and 24v dc_npcil specification pc_e_432 for low range area radiation monitors. make ecil , highvoltage power supply hvpsmodule.input 12v_neg12v_24vdc.output 0_1250vdc variable by helipot with locking dial max current1ma_npcilspec pc_e_432 for low range area radiation monitors.makeecil , signal processing unit. npcil specification pc_e_432 for low range area radiation monitors. make ecil , l.v power supply 15v dc_1a_15v dc_1a_24v dc_0.5a_5vdc_2a. npcil specification pc_e_436 for ventilation duct radiation monitors. make ecil , h.v power supply_0 to 1250v variable by helipot with locking dial. max current 1ma.npcil specification_pc_e_436 for ventilation duct radiation monitors. make ecil , signal and alarm module. npcil specification pc_e_436 for ventilation duct radiation monitors. make ecil , analog indicating meter, npcil specification pc_e_436 for ventilation duct radiation monitors. make ecil , low voltage power supply 15v dc_1a_negative 15v dc_1a_24v dc_0.5a_5vdc_2a_npcil specification_pc_e_434 for wide range area radiation monitors. make ecil , high voltage power supply_0 to 1250v variable by helipot with locking dial. max current 1ma. npcil specification_pc_e_434 for wide range area radiation monitors. make ecil , signal processing unit. npcil specification pc_e_434 for wide range area radiation monitors. make ecil , analog indicating meter. npcil specification pc_e_434 for wide range area radiation monitors. make ecil , vacuum pump. npcil specification pc_e_695 and pc_e_734 for area iodine_particulate radiation monitors. make ecil , pump maintenance kit set. npcil specification pc_e_695 for area iodine_particulate radiation monitors. make ecil , high voltage power supply_hvps_module. npcil specification pc_e_446 for process water discharge activity monitors. make ecil , low voltage supply module. npcil specification pc_e_446 for process water discharge activity monitors. make_ecil , temperature protecting module. npcil specification pc_e_446 for process water discharge activity monitors. make ecil , detector. npcil specification pc_e_439 for stack gamma monitor. make ecil , detector. npcil specification pc_e_437 for stack iodine monitor. make ecil , detector. npcil specification_pc_e_438 for stack particulate monitor. make ecil , high voltage power supply_hvps_module for ion chamber. make ecil , control pcb for flasher hooter. make ecil , power supply pcb for flasher hooter. make ecil , speaker assembly for flasher hooter. make ecil , red led light assembly for flasher hooter. make ecil , rotameter. npcil specification pc_e_568 for tritium in water monitoring_tiwm_system. make ecil , differential pressure indicating alarm. npcil, boq for supply of ecil make radiation monitoring instruments and its spares, as per boq
Agency / Dept :
nuclear power corporation of india limited NPCIL
Due Date :
Oct 05, 2026 (3 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17415283
Location : tura , meghalaya
Source : GEM Tenders
LIVE TENDER
corrigendum tender for high performance thin layer chromatography (hptlc) (q3) , inductively coupled plasma mass spectrometer , scanning electron microscopy , liquid chromatography and mass spectrometry , gas chromatography mass spectrometry , fourier transform infrared spectroscopy , hunter lab colorimeter , water purification systems , probe sonicator , double beam uv vis spectrophotometer , biochemical analyzer , automatic portable milk analyzer , bomb calorimeter , distillation unit , rheometer , bio safety cabinet , digital abbe refractometer , deep freezer , electrical analytical balance , karl fischer titration , automatic proximate analyzer , lovibond tintometeter , moisture analyzer , turbidity meter , vacuum oven , elisa reader with plate washer , horox full 3d microscope system , rotary evaporator with pump , fluorimeter , compact fast x ray microct scan , laminar air flow chamber , bod , cod , oxidation stability analyzer , polarimeter , alcohol analyzer , digital density meter , falling number , gluten analyzer , dil flow , bag mixer, food testing lab equipments, as specified
Agency / Dept :
north eastern hill university NEHU
Due Date :
Oct 07, 2026 (5 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17460323
Location : kochi , kerala
Source : GEM Tenders
LIVE TENDER
tender for desalted oligonucleotides 0.025 umol scale , pressure filter cartridges for edna water sample collection 0.45 um pvdf 1000 ml , nickel or chrome plated 1 by 4 inch hose barb to male luer lock adapter , nylon membrane filter discs 180.0 um pore size 47 mm , nylon membrane filter discs 20.0 um pore size 47 mm , column based dna extraction kit for pressure filter units , total dna extraction kit for animal blood and tissues , ung based dna isolation kit for ffpe tissues , magnetic bead based dna extraction kit for ffpe samples , magnetic separator for 96 well plates , 96 well square well deep well blocks , 8 tube strip racks with sealing cap strips , 96 well microplates with 300 ul u bottom wells and sealing foils , blunt and ta ligase master mix , ffpe dna repair enzyme mix , end repair and da tailing module , quick ligation module , 100 bp dna ladder , high molecular weight hmw dna isolation kit for animal tissue , high molecular weight dna isolation kit for fish and animal tissue , pcr standardization master mix , non carcinogenic nucleic acid gel stain , molecular biology grade high resolution agarose , 1 kb dna ladder , 50x tae electrophoresis buffer , high throughput nanopore sequencing flow cells , native barcoding multiplexing kit , flow cell wash and regeneration kit , auxiliary expansion kit for native barcoding , binder free glass microfiber filter circles grade gf f 47 mm , track etched polycarbonate membrane filters 0.2 um 47 mm , cellulose nitrate membrane filter circles 3.0 um 47 mm , gel and pcr clean up kit, tender for the supply of laboratory chemicals and consumables, custom dna oligonucleotides. standard 0.025 umol (25 nmol) synthesis scale. desalt purification only. sequence length 10 to 120 bases. standard bases a c g t only with no modifications. supplied in dried form to be reconstituted with nuclease-free water to obtain a standard working concentration of 100 um. 100 percent mass spectrometry verified. minimum guaranteed yield 2 od (approx 66 ug). per-order technical datasheet with qc report to be supplied with each delivery., pressure filter units compatible with syringes peristaltic pumps or pressure vessels. designed to eliminate contamination risks associated with decanting or pipetting. dispenses directly into standard storage containers. processing capacity up to 1000 ml or 2000 ml. features a 0.45 um pvdf membrane for sterile filtration and particulate retention., 1 by 4 inch (6.4 mm) hose barb to male luer lock adapter with nickel or chrome plating. internal diameter 6.3 mm (0.25 inch). designed for connecting tubing to standard male luer lock filtration assemblies for sample preparation., plain white non-sterile hydrophilic nylon membrane filter discs. pore size 180.0 um with 47 percent porosity. disc diameter 47 mm and thickness 135 um. maximum operating temperature 100 deg c. intended for solvent filtration particle analysis particle removal clarification and collection of cells or biological material., plain white non-sterile hydrophilic nylon woven net membrane filter discs. pore size 20.0 um with 14 percent porosity. disc diameter 47 mm and thickness 55 um. maximum operating temperature 100 deg c. suitable for particle analysis prefiltration and collection of cells or algae., kit for isolation of genomic dna from water samples collected using pressure filter capsules (50 preps). features in-unit digestion with bead-based lysis. dedicated inhibitor removal technology eliminates salts metals and humic substances. spin-column purification protocol without harsh organic chemicals. elution volume 50 to 100 ul. suitable for qpcr sanger sequencing and ngs workflows., silica-membrane spin-column kit for extraction of genomic and mitochondrial dna from up to 25 mg animal tissue whole blood up to 200 ul body fluids swabs or cells. enzymatic lysis without mechanical homogenization or organic extraction. average dna yield 4 to 30 ug with fragment sizes up to 50 kb. elution volume 50 to 200 ul. suitable for pcr qpcr and genotyping., silica-column purification kit for isolation of genomic dna from formalin-fixed paraffin-embedded tissue sections up to 4 mm cube. features xylene-free deparaffinization and heat de-crosslinking. integrated uracil-n-glycosylase (ung) treatment eliminates artificial deamination artifacts (c to t and g to a transitions). low elution volume 20 to 100 ul. suitable for pcr dpcr and ngs., paramagnetic bead-based extraction kit for genomic dna from ffpe tissue sections (less than or equal to 5 mg tissue and less than 15 mg paraffin). 384 preps in 4 x 96 format. adaptable to manual or automated 96-well liquid handling platforms. features paraffin dissolver and decrosslinking buffers. recovers fragments from 300 bp to 50 kb with elution volume greater than 25 ul., magnetic separation rack equipped with static magnetic pins or magnets designed for manual nucleic acid isolation in standard 96-well formats. accommodates 96-well square-well deep-well blocks and standard u-bottom elution plates. holds paramagnetic beads in place during wash and elution steps., 96-well square-well blocks with 2.1 ml working volume per well. compatible with magnetic bead separation racks automated platforms and vacuum manifolds. chemically resistant non-sterile and non-hazardous. shelf life up to 72 months., racks containing 12 strips of 8 tubes with 1.2 ml capacity per well. supplied with 12 matching 8-cap sealing strips per rack. suitable for column-based and magnetic bead-based purification protocols under vacuum or centrifugation., 96-well microplates featuring 300 ul u-bottom wells. supplied complete with compatible self-adhering sealing foils. suitable for elution sample storage and magnetic bead pelleting workflows., ready-to-use 2x master mix containing dna ligase and optimized buffer enhancer system. designed for rapid ligation of both blunt-ended and single-base overhang (ta) dna substrates. formulated for room temperature incubation (15 min at 25 deg c) without mandatory heat inactivation. liquid formulation at minus 20 deg c., multi-enzyme repair cocktail designed to repair damaged dna from ffpe samples prior to library construction. repairs deaminated cytosines nicks or gaps oxidized bases and blocked 3-prime ends for 5 ng to 1 ug dna inputs. supplied as enzyme mix with 10x reaction buffer., reagent module for coupled enzymatic end repair and 3-prime da tailing of fragmented dna (500 pg to 1 ug input). converts blunt or ragged-ended fragments to 5-prime phosphorylated and da-tailed fragments for standard sequencing adapter ligation. optimized for high-throughput library preparation., fast-acting ligation module containing concentrated dna ligase and 5x reaction buffer with crowding agent. designed for efficient ligation of sequencing adapters to end-repaired or da-tailed fragments within 15 minutes at 20 deg c., dna molecular weight marker with 11 discrete dsdna bands ranging from 100 bp to 1000 bp in 100 bp increments plus an additional 1500 bp band. reference band at 500 bp has increased intensity. supplied at 0.13 ug per ul (250 ul total volume for 50 lanes) with separate 6x gel loading dye., gentle solution-based extraction kit designed to isolate ultra-high molecular weight genomic dna up to 500 kb with minimal shearing. compatible with blood cultured cells and tissue samples. includes specialized lysis buffers proteinase k precipitation solutions and rnase a. optimized for long-read sequencing platforms., solution-based genomic dna extraction kit providing high molecular weight dna up to 500 kb from animal and fish tissue specimens. utilizes precipitation and wide-bore handling to prevent fragment shearing. free of spin-column mechanical shear., optimization system comprising 8 preformulated 5x buffers covering gc-rich inhibitor-resistant standard and multiplex chemistries. includes hot-start dna polymerase 25 mm mgcl2 and nuclease-free water for empirical determination of optimal pcr conditions., non-mutagenic non-cytotoxic fluorescent nucleic acid dye (10000x in dmso) for detection of dsdna ssdna and rna in agarose or polyacrylamide gels. safe alternative to ethidium bromide. compatible with blue-light or uv transillumination (excitation approx 495 nm and emission approx 558 nm)., analytical-grade low-eeo (less than or equal to 0.13) agarose powder certified free of dnase and rnase activity. gel strength (1 percent) greater than or equal to 1000 g per sq cm. gelling point 36 to 39 deg c. melting point 87 to 89 deg c. suitable for analytical and preparative nucleic acid electrophoresis., dna ladder comprising 13 blunt-ended double-stranded fragments from 250 bp to 10000 bp with reference orientation bands at 1000 bp and 3000 bp. supplied at 0.1 ug per ul with 6x loading dye. for sizing on 0.8 to 1.5 percent agarose gels., concentrated 50x tris acetate edta liquid buffer. composition is 2 m tris acetate and 0.05 m edta (ph 8.2 to 8.4 at 25 deg c). certified dnase and rnase free. dilutes to 1x working buffer for agarose gel preparation and running buffer in nucleic acid electrophoresis., flow cells featuring sensor arrays and nanopore reader heads compatible with high-capacity benchtop nanopore sequencing devices. suitable for real-time long-read dna sequencing with run durability up to 72 hours., pcr-free multiplexing library preparation kit containing 96 unique native barcode adapters for pooled sequencing of up to 96 samples (genomic dna or amplicons). includes barcode plates adapters reaction buffers and magnetic purification beads for long-read platforms., enzymatic nuclease-based wash kit for digestion and removal of previously loaded dna or rna sequencing libraries to regenerate active pores on long-read flow cells. includes wash mix (dnase i) wash diluent and storage buffer., reagent expansion kit providing supplemental library preparation reagents (adapters magnetic purification beads and fragment wash buffers) to process unused barcodes in 24-reaction and 96-reaction native multiplexing workflows., plain borosilicate glass microfiber filter discs without chemical binders. disc diameter 47 mm. nominal particle retention 0.7 um. basis weight 75 g per sq m. temperature resistance up to 550 deg c. intended for dna binding biochemical clarification and fine precipitate retention., hydrophilic track-etched polycarbonate microporous membrane discs. calibrated cylindrical pore size 0.2 um. disc diameter 47 mm. autoclavable at 121 deg c. biologically inert with smooth surface and low non-specific protein binding., hydrophilic plain white cellulose nitrate membrane filter discs. pore size 3.0 um. disc diameter 47 mm. thickness 105 to 140 um. maximum operating temperature 80 deg c. autoclavable. suitable for sample preparation and aqueous solution filtration., silica-membrane spin column purification system for recovery of dna fragments (100 bp to 10 kb) directly from pcr reactions enzymatic digests or agarose gel slices (tae or tbe). column binding capacity up to 40 ug. recovery up to 95 percent. elution volume down to 15 ul.
Agency / Dept :
centre for marine living resources and ecology CMLRE
Due Date :
Oct 13, 2026 (11 days left)
Tender Value :
45L
View Documents
T18 Ref No : 17517950
Location : kamrup , assam
Source : GEM Tenders
LIVE TENDER
tender for supply installation testing and commissioning of equipment and machinery title1 , title2 , title3 , title4 , title5 , title6 , title7 , title8 , title9 , title10 , title11 , title12 , title13 , title14 , title15 , title16 , title17 , title18 , title19 , title20 , title21 , title22 , title23 , title24 , title25 , title26 , title27 , title28 , title29 , title30 , title31 , title32 , title33 , title34 , title35 , title36 , title37 , title38 , title39 , title40 , title41 , title42 , title43 , title44 , title45 , title46 , title47 , title48 , title49 , title50 , title51 , title52 , title53 , title54 , title55 , title56 , title57 , title58 , title59 , title60 , title61 , title62 , title63 , title64, boq 1, boq 2, boq 3, boq 4, boq 5, boq 6, boq 7, boq 8, boq 9, boq 10, boq 11, boq 12, boq 13, boq 14, boq 15, boq 16, boq 17, boq 18, boq 19, boq 20, boq 21, boq 22, boq 23, boq 24, boq 25, boq 26, boq 27, boq 28, boq 29, boq 30, boq 31, boq 32, boq 33, boq 34, boq 35, boq 36, boq 37, boq 38, boq 39, boq 40, boq 41, boq 42, boq 43, boq 44, boq 45, boq 46, boq 47, boq 48, boq 49, boq 50, boq 51, boq 52, boq 53, boq 54, boq 55, boq 56, boq 57, boq 58, boq 59, boq 60, boq 61, boq 62, boq 63, boq 64 dual background correction as standard, high speed dual frequency simultaneous measurement d2 background correction and high speed self reversal background correction, 100mm air-acetylene solid titanium burner as standard for automatic ignition and extinction of flame, high efficiency nebulizer with chamber made of engineering plastic, platinum-iridium orifice and ceramic impact bead resistant to strong acids including hf, fully computerized gas flow control system with automatic setting of optimum fuel and oxidant flow rates, performance guarantee: greater than 0.9 abs for 5mg/l copper solution with an rsd of less than 0.5%, automatic gas flow control, software operation on windows 10 professional for complete instrument control, data acquisition and processing, single hollow cathode lamps for cu, zn, fe, pb, hg, as and mn, automatic hydride vapour generator, future upgradation option to graphite furnace atomizer, pre installation requisites (pir) like fume hood, double stage ss regulator for acetylene, argon, line regulator for compressed air, acetylene gases cylinder, argon gas cylinder, gas control box, oil free air compressor, air filters, 10 kva online ups with 1 hour back up, branded i5 pc with original os, standards, controller : micro controller based, keypad : membrane keypad, display : 16 x 2 line alphanumeric lcd display with backlit, capacity : count maximum upto 999999 seeds in a lot, memory : memory to store settings of 99 commodity parameters, feeding electromagnetic vibratory feed, vibration control : precise digital vibration control through membrane keypad, two step fast and slow digital vibration control, error correction : programmable stop to compensate in flight error, smooth operation : very smooth digital soft start, range : count seeds in the range: 0.3 mm to 15 mm, separate pan for seed size below 1 mm, seed movement : adjustable knob provided on pan, pan : metallic pan of volume- 200 cc, interface : rs 232 and parallel port interface capabilities, bod incubator, air circulation, heating & cooling system, trays for samples, safety features, boerner divider, bunsen burner, cabinet germinator, conductivity meter/tds meter, cooling storage cabinet for samples, rs 232 port, hot keys, keypad: membrane type keypad, averaging, recall facility, curve programming commodities, new commodity calibration, data logging, data storage capacity, power: 9v dc adaptor for ac mains or 6 dry cells, fume hood with exhaust facility, centrifugal blower, ducting, impression board-assorted numbers, inoculation needle, laminar flow cabinet, micropipette set, muffle furnace, over temp protection system-with audio alarm, nabl certified weight box, pcr machine, single block semi-quantitative pcr machine, ph meter, reciprocal/orbital incubator shaker, rh control unit for prefabricated germination room, rotary shaker, rotary (vacuum) evaporator, seed blower, seed grinder, seed sacrafer, serological water bath, uv- vis spectrophotometer, top loading weighing balance, uv chamber, vacuum filteration device with vaccum pump, water bath shaker, gas chromatograph with fid & tcd, automatic oil colour tintometer/colourimeter, digital refractive index meter, calibrated thermometer – 50°c, calibrated thermometer – 110°c, calibrated thermometer – 350°c, weighing scale – 5 kg, weighing scale – 30 kg, oil bath, digital total polar meter, laboratory water bath, laboratory hot plate, laboratory incubator, hot air oven, laboratory grade refrigerator, automatic 6-position soxhlet/fat analyser
Agency / Dept :
department of agriculture
Due Date :
Oct 09, 2026 (7 days left)
Tender Value :
2.93Cr
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16767822
Location : faridabad , haryana
Source : GEM Tenders
tender for high vacuum pump (q3)
Agency / Dept :
geological survey of india GSI
Due Date :
Aug 24, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to High Vacuum Pump. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the High Vacuum Pump sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the High Vacuum Pump Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in High Vacuum Pump, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our High Vacuum Pump Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For High Vacuum Pump Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for High Vacuum Pump.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for High Vacuum Pump depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For High Vacuum Pump Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for High Vacuum Pump bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of High Vacuum Pump. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for High Vacuum Pump, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to High Vacuum Pump, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in High Vacuum Pump?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based High Vacuum Pump tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for High Vacuum Pump?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for High Vacuum Pump, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for High Vacuum Pump is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All