Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

688Latest Green board Tenders List

Latest Green board Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Green board tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Green board tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Green board Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Green board tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Green board Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Green board Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Green board Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Green board tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Green board Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Green board sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Green board tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Green board tenders.

Is EMD mandatory for all Green board tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Green board work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Green board tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Green board Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

T18 Ref No : 16670776
Location : sachin , gujarat
Source : GEM Tenders
NEW TENDER
tender for electrical trade boq inductor , resistance , hook up wire , capaitor , capaitor electrolite , transistor , ujt , carbon resistor , addon block , remote controlle switching system for fan and light with remote , infrared motion detector sensor 360 degree pir , 4 channel led chaser electronics sequencial controller for led , capacitor , p.v.c insulated , hard drawnben cu wire , bare cu wire , cu lugs , xlpe insulated al cable , pvc insulated al armed cable , one way switch , banana terminal , pvc insulation tape , pvc insulated multi strened flexible wire , 1.5 alkline cell , piano types switch , battan holder , gangway one way box , round block , pvc tee , wooden screw , fan regulator electronic , plug socket 6 a , angle holder 6a , gangbox , 2 way switch , pvc insulted 2.5 sq mm cu lexible wire , diaod , transformer , pcb , solderig wire , solder flux , drill bit , toggal switch 2 way , contactor , overload relay 5-8 a , mcb 32 a , rotary switch , stop push button , start push button , indicating lamp , spiral flexible pvc bend , pvc insulated , fluorecent tibe light with fitting and choke , pvc conduit pipe , led bulb , rj 45 cable connector , cat cable 4 pairs , 0.5 sq mm pvc flexible wire , led , led lamp holder with pvc cap , emery paper ruff and smooth , lamp , white board marker , chalk , green board duster , white board duster , pvc casing capping , pvc casing capping elbow , pvc junction box , pvc junction box 3 way 19 mm , pvc junction box 4 way 19 mm , pvc elbow 19 mm , arduino uno , jumper wire , active buzzer , mq 2 smoke sensor , lcd display , i2c module , programme cable arduino , hc - sr04 ultrasonic sensor , servo motor , battery with cap, electrical trade boq, 3 mh, 470 ohm /0.5 w, pvc insulation single stranded hook up wires in red blue yellow green black color, 100 microfarad 25 v, 16 microfarad 16 v, 474 k 400 v, 1 microfarad 400v, bc 547, 470 microfarad 50 v, 2 k ohm /0.5 w, 2n 2626, 100e 0.5 w, 20 amp clamp connector type 2 way, 22 k ohm 47 k ohm, 150 k ohm 0.5 watt, network connectivity technology infrared maximum range 40 feet pre programmed, sense range 100 sense distance 8m 22c power supply ac110-240v working temperature 10 to 32c detection range 360, 1/4 w 82 ohm, module type is running or chaser light controller number of channels 4 control ics ne555 timer cd4017 counter input voltage dc 5v to 12v maximum load current up to 5a total and application dependent, 2.5 mf, 10 mf, 20 mf, 1 by 18 cu wire, 3 by 20 cu wire, 7 by 20 cu wire, 4 mm dia 8 swg, 1 mm dia 19 swg, 1.5 sq mm, 35 sqmm, aluminium armoured 50 sqmm, 6a 20v, pure copper terminal 4mm, self adhesive electrical insulation tape, 1.5 sqmm, 1.5 wa, 6 ampere piano type switch white, 6a, pvc white, 2.5 inch x 1, 3/4inch, 12x5 mm, 25 x5 mm, 45x8 mm, 220-240 v 80 to 100 wcapacity, 3 way 2 switch 1 socket, 2 way 2 switch, 2.5 mm cu wire, 1n4007, 230/6 v 500 ma, 230/6-0-6 v, 4inch x 4inch, material tin wire diameter 1.0mm flux 1.8, suitable for pcb bga pga and smd reworking, 240 v / 14 v, 1 mm 3 mm, 560e 0.5 w, 1k 0.5 w, 3-pin 2-way spdt switch0.25, 16 a, 5-8 a, 32 a, 3 position 10 to 40 a, switch type spst single pole single throw simple onoff functionality electrical ratings 24v operating voltage with a 2a current rating suitable for low voltage applications. build material metal body with plastic actuator durable housing with insulated switching interface color red, switch type spst single pole single throw simple on off functionality electrical ratings 24v operating voltage with a 2a current rating suitable for low voltage applications build material metal body with plastic actuator durable housing with insulated switching interface color green, 100 w 230 v, material polyethylene diameter 6 mm color white, armoured 25 sqmm, 40 w, 20 mm, 9 w 250 v, 3 way 2 switch 2 socket, ethernet cat 6, twisted pair color blue, 0.5 sq mm cu wire, 5mm 3 v red, 5mm 3 v yellow, 5mm 3 v blue, 5mm 3 v green, 5mm 3 v orange, insulation material polycarbonate ip rating ip20 color white power factor more than 0.95, 1000 grit, 60 w 230 v, blue black green, white, color green shape rectangle, magnetic plastic, 25mm x 10mm, 1 way 19 mm, 2 way 19 mm, 3 way 19 mm, 4 way 19 mm, 19 mm, 19 mm, arduino uno r3 compatible board atmega328p dip version, male to female, male to male, 5 v, operating voltage 5v, 16 x 2, i2c module compatible with 16 x 2 lcd ic chip pcf8574 power supply 5v, compatible with the pc usb type-a to usb type-b length 30.48cm, module 5 v, sg 90 combo kit with jumper wires and mounting screws, 9 volt heavy duty battery
T18 Ref No : 16668268
Location : banaskantha , gujarat
Source : GEM Tenders
NEW TENDER
tender for binder clip 19mm , binder clip 25mm , binder clip 32mm , binder clip 41mm , blank cd cover , bond paper 90gsm , borosil glass medium , box file , broom , calculator normal , calling bell , cell medium , cell small , colline spray , clip board transprent , cover roll orange laminator a3 , cover roll orange laminator legal , dak folder plastic , dinner set , double punch , dust bin stainless steel 6l , dust cloth , eraser , fevicol tube 200ml , file cover white , glue stick 50g , handwash detol refill , highlighter combo , hp 36a cartage , induction stove 2000w , letters and figures alkosign , mouse incl pad , multi colour hand towel small size , mosquto spray 200ml , sticky pad yellow , napkin paper , odonil , paper cutter plastic , paper pin t type , pen black uniball , pen blue uniball , pen green unibal , pen hauser germany xo blue , pen red uniball , pen renolds black , pen renolds blue , pen stand big , pen stand small , pencil nataraj , permenant marker big black , permenant marker big blue , pocha , photo paper a4 , pilot pen black v5 , pilot pen blue v5 , pilot pen green v5 , pilot pen red v5 , pilot pen v7 hightech blue , pocker with plastic handle , pointer , register 1quire , register 2quire , register 3quire , register 4quire , register 5quire , register 6quire , room freshner , stamp pad ink , scale steel , sharpner , sketch pen , stamp pad big , stappler small , stappler pin big , stappler pin small , stik pad , talcum sheet dgt 50 mtr , tag large size , tag small size , tape blue 2inch , tape dispensor 1 inch , tape dispensor 2 inch , tape green 2 inch , tape red 2 inch , transparent tape 2 inch , tape brown 2 inch , tea coster , tee cup normal , tee cup premium , temperory marker big black , thumb pin golden colour , u clip plastic , umbrella big , white hand towel small size , whitener , writing pad 6x4inch , table top acrylic elevator writing desk, binder clip 19mm, binder clip 25mm, binder clip 32mm, binder clip 41mm, blank cd cover, bond paper 90gsm, borosil glass medium, box file, broom, calculator normal, calling bell, cell medium, cell small, colline spray, clip board transprent, cover roll orange laminator a3, cover roll orange laminator legal, dak folder plastic, dinner set, double punch, dust bin stainless steel 6l, dust cloth, eraser, fevicol tube 200ml, file cover white, glue stick 50g, handwash detol refill, highlighter combo, hp 36a cartage, induction stove 2000w, letters and figures alkosign, mouse incl pad, multi colour hand towel small size, mosquto spray 200ml, sticky pad yellow, napkin paper, odonil, paper cutter plastic, paper pin t type, pen black uniball, pen blue uniball, pen green unibal, pen hauser germany xo blue, pen red uniball, pen renolds black, pen renolds blue, pen stand big, pen stand small, pencil nataraj, permenant marker big black, permenant marker big blue, pocha, photo paper a4, pilot pen black v5, pilot pen blue v5, pilot pen green v5, pilot pen red v5, pilot pen v7 hightech blue, pocker with plastic handle, pointer, register 1quire, register 2quire, register 3quire, register 4quire, register 5quire, register 6quire, room freshner, stamp pad ink, scale steel, sharpner, sketch pen, stamp pad big, stappler small, stappler pin big, stappler pin small, stik pad, talcum sheet dgt 50 mtr, tag large size, tag small size, tape blue 2inch, tape dispensor 1 inch, tape dispensor 2 inch, tape green 2 inch, tape red 2 inch, transparent tape 2 inch, tape brown 2 inch, tea coster, tee cup normal, tee cup premium, temperory marker big black, thumb pin golden colour, u clip plastic, umbrella big, white hand towel small size, whitener, writing pad 6x 4inch, table top acrylic elevator writing desk
T18 Ref No : 16668620
Location : bhopal , madhya pradesh
Source : GEM Tenders
NEW TENDER

Unlock Full Tender Access

Start Free Trial to download documents before deadline

T18 Ref No : 16664144
Location : amreli , gujarat
Source : GEM Tenders
NEW TENDER

Unlock Full Tender Access

Start Free Trial to download documents before deadline

T18 Ref No : 16663944
Location : umarpada , gujarat
Source : GEM Tenders
NEW TENDER
corrigendum tender for electrical electronics and mechanical raw material mains cord 3 core cable 650v grade 23 0.2 , cotton thread 2mm , transformer 230 6v 500ma , transformer 230 6-0-6v , resistor 4700ohm 0.5w , capacitor 1000ufd 50v , capacitor 0.2uf , capacitor 5.6uf , capacitor 6.8uf , dc lamp 25 40 watt 250v , fuse wire 5a , fuse wire 10a , fuse wire 16a , fibre wedge g10 fr4 , power electronics device mosfet , igbt , scr , traic , diac , diode in5408 , diode in4007 , zener diode 12v 0.5a , transistor bc 107 , transistor bc 547 , led red 5mm 3v , led blue 5mm 3v , led green 5mm 3v , led yellow 5mm 3v , voltage selector switch 415v 16a , current selector switch 415v 16a , machine screw with nut 30x5mm , petroleum jelly 100gm , carbon tetra chloride , melinex sheet 0 mtrx 1 mtr , triplex paper 1 mtrx 1 mtr , fiber sleeve 1mm to 6mm , leatheroid paper gsm 150 4x3 inch , soldering flux , probes 500v , cement , river sand , adhesive tape bopp 1 inch width , copper clad board 75mm x 60mm , plastic tray 30cm x 15cm , detergent powder , potentiometer 1kohm , carbon filmed resistor 5 ohm , wirewound fixed resistor 1 ohm , rectifier diode in4001 1a 50v , transistor lm317 , transistor bc548 , spst switch 6a 250v , step down transformer 240v 12-0-12 , carbon resistor 0.25w 120 ohm , carbon resistor 0.25w 470 ohm , carbon resistor 0.25 330 ohm , carbon resistor 0.25w 182 ohm , sleeve 1mm red yellow black colour , heat shink for to 220 package , push button for panel 250v start green stop red , indicator for panel 250v on green off red , electronics relay 170v-270v 6v , neon lamp 250v , solar cell 0.45w , led lamp with reflector 12v 3w , ferrule connector alluminium , resistor 2k 1w , resistor 62kohm 1w , resistor 33kohm 1w , resistor 22kohm 1w , resistor 470kohm 1w , tube chalk 40w , capacitors mica electrolyte paper , electrolyte litter , sunmica board 20x30mm , motion detector sensor , led bulb 9w 250v , plywood 800x800x19mm , plywood 25x25x9mm , pvc raceways 3 by 4 inch , clf display sportlight 15w 240v , led down light 15w 240v , construction of axial cable rg6 , cctv cable rg59 , bnc connector , cable connector rg6 , indicating lamp flush type , drill bit 6mm rcc ms , nutbolt 6mm , resistor 470ohm 0.5w , dc power connector pin , teak wood batten 300x25x12mm , teak wood batten 700x25x12mm , plywood laminated sheet 200x150x3mm , teakwood board or plyboard 400x300x19mm , gi sheet 200x180x245 , sheet metal 18 guage 600x600mm , sheet metal 18 guage 328x350mm , split bolt connector with pin for 35sqmm conductor 1pc , copper brazing rods 300gm , earthing cu pipe 1mtr 40mm dia , earthing cu plate 150mmx150mmx2mm , salt , charcoal , steel rod dia 9mm 60cm , ms 215- soft iron core 23mm , ms roundbar flux 2.4cm 22cm length , all. roundbar flux 2.4cm 22 cm length , banana terminal board 4 point , capacitor 250uf 250v , ignitor 35w to 150w , capacitor 8uf , capacitor 5uf , inductor mercury choke 250w , steel wire 22gauge 50cm , plastic seal for sealing energy meter , fixed resistance wire wound 8k 1w , variabale resistance wire wound 14kohm 1w , normex insulating paper , nail 17by1 inch 250gm , plastic bins red ,blue,green, yellow , crimping ferrule 1mm 4mm 10mm , resistor 10ohm , capacitor 2uf , battery cap 9v , gi sheet 300x200x2mm , teakwood board 8x10 inch , ms roundbar 30mm dia , g.i sheet 24swg 8x4ft , ms flat 75x8mm , different size of nut bolt , radiator hose clamp diff. size , ms flat 50x6mm , ms flat 50x2mm , ms roundbar 10mm dia , ms flat 50x3mm , ms flat 150x10mm , ss electrode 2.15mm dia , automatic transmission oil , battery smf , brake fluid 500ml , chalk prussian blue , chemical compound for fasteners 500ml , different type of gasket material , different type of oil seal , gear oil , gloves for welding leather and asbestos , lapping abrrasives , power steering oil , radiator coolants , embroidary ring , stationary kit , cardboard sheet, mains cord 3 core cable 650v grade 23 0.2, cotton thread 2mm, transformer 230/6v 500ma, transformer 230/6-0-6v, resistor 4700ohm 1/2w, capacitor 1000ufd 50v, capacitor 0.2uf, capacitor 5.6uf, capacitor 6.8uf, dc lamp 25/40 watt 250v, fuse wire 5a, fuse wire 10a, fuse wire 16a, fibre wedge g10/fr4, power electronics device mosfet, igbt, scr, traic, diac, diode in5408, diode in4007, zener diode 12v 0.5a, transistor bc 107, transistor bc 547, led red 5mm 3v, led blue 5mm 3v, led green 5mm 3v, led yellow 5mm 3v, voltage selector switch 415v 16a, current selector switch 415v 16a, machine screw with nut 30x5mm, petroleum jelly 100gm, carbon tetra chloride, melinex sheet 0 mtrx 1 mtr, triplex paper 1 mtrx 1 mtr, fiber sleeve 1mm to 6mm, leatheroid paper gsm 150 4x3 inch, soldering flux, probes 500v, cement, river sand, adhesive tape bopp 1 inch width, copper clad board 75mm x 60mm, plastic tray 30cm x 15cm, detergent powder, potentiometer 1kohm, carbon filmed resistor 5 ohm, wirewound fixed resistor 1 ohm, rectifier diode in4001 1a 50v, transistor lm317, transistor bc548, spst switch 6a 250v, step down transformer 240v 12-0-12, carbon resistor 1/4w 120 ohm, carbon resistor 1/4w 470 ohm, carbon resistor 1/4w 330 ohm, carbon resistor 1/4w 182 ohm, sleeve 1mm red yellow black colour, heat shink for to 220 package, push button for panel 250v start green stop red, indicator for panel 250v on green off red, electronics relay 170v-270v 6v, neon lamp 250v, solar cell 0.45w, led lamp with reflector 12v 3w, ferrule connector alluminium, resistor 2k 1w, resistor 62kohm 1w, resistor 33kohm 1w, resistor 22kohm 1w, resistor 470kohm 1w, tube chalk 40w, capacitors mica electrolyte paper, electrolyte litter, sunmica board 20x30mm, motion detector sensor, led bulb 9w 250v, plywood 800x800x19mm, plywood 25x25x9mm, pvc raceways 3by4inch, clf display sportlight 15w 240v, led down light 15w 240v, construction of axial cable rg6, cctv cable rg59, bnc connector, cable connector rg6, indicating lamp flush type, drill bit 6mm rcc ms, nutbolt 6mm, resistor 470ohm 1/2w, dc power connector pin, teak wood batten 300x25x12mm, teak wood batten 700x25x12mm, plywood laminated sheet 200x150x3mm, teakwood board or plyboard 400x300x19mm, gi sheet 200x180x245, sheet metal 18 guage 600x600mm, sheet metal 18 guage 328x350mm, split bolt connector with pin for 35sqmm conductor 1pc, copper brazing rods 300gm, earthing cu pipe 1mtr 40mm dia, earthing cu plate 150mmx150mmx2mm, salt, charcoal, steel rod dia 9mm 60cm, ms 215- soft iron core 23mm, ms roundbar flux 2.4cm 22cm length, all. roundbar flux 2.4cm 22 cm length, banana terminal board 4 point, capacitor 250uf 250v, ignitor 35w to 150w, capacitor 8uf, capacitor 5uf, inductor mercury choke 250w, steel wire 22gauge 50cm, plastic seal for sealing energy meter, fixed resistance wire wound 8k 1w, variabale resistance wire wound 14kohm 1w, normex insulating paper, nail 17by1 inch 250gm, plastic bins red ,blue,green, yellow, crimping ferrule 1mm 4mm 10mm, resistor 10ohm, capacitor 2uf, battery cap 9v, gi sheet 300x200x2mm, teakwood board 8x10 inch, ms roundbar 30mm dia, g.i sheet 24swg 8x4ft, ms flat 75x8mm, different size of nut bolt, radiator hose clamp diff. size, ms flat 50x6mm, ms flat 50x2mm, ms roundbar 10mm dia, ms flat 50x3mm, ms flat 150x10mm, ss electrode 2.15mm dia, automatic transmission oil, battery smf, brake fluid 500ml, chalk prussian blue, chemical compound for fasteners 500ml, different type of gasket material, different type of oil seal, gear oil, gloves for welding leather and asbestos, lapping abrrasives, power steering oil, radiator coolants, embroidary ring, stationary kit, cardboard sheet, wool, piping cord, press button, hook and eye
T18 Ref No : 16663993
Location : mormugao , goa
Source : GEM Tenders
NEW TENDER
T18 Ref No : 16664766
Location : hyderabad , telangana
Source : GEM Tenders
NEW TENDER
corrigendum tender for frp tape 1 , thermal tape 1 , teflon tape 1 , paper tape 1 , role extension board with 100 mtr cable length , 3 pin socket 6 amp , 3 pin socket 16 amp , rj45 connector , mcb 6 amp , mcb 10 amp , 3 pin plug 6 amp , 3 pin plug 16 amp , lacing thread lc136 , knife and blade set , soldering lead each per 500 grams , rma soldering flux 1 ltr , lugs red 22 16 awg 31890 , lugs red 22 16 awg 36150 , lugs 16 6 710030 3 , lugs 10 12 710032 2 , push button switch red , push button switch black , toggle switch 3 amp , toggle switch 5 amp , toggle switch 10 amp , 5mm red led with housing , 5mm green led with housing , 10mm red led with housing , 10mm green led with housing , wago connector with rail , pcb turret 3 slot , solderable splice 12 awg to 22 awg temperature range 55 degree c to plus 125 degree c cwt 900x , solderable splice 20 awg to 22 awg temperature range 55 degree c to plus 125 degree c cwt 900x , solderable splice 16 awg to 22 awg temperature range 55 degree c to plus 125 degree c cwt 900x , solderable splice 20 awg to 26 awg temperature range 55 degree c to plus 125 degree c cwt 900x , fr4 sheet , dowsil 3145 rtv , dowsil 3140 rtv , heat shrinkable sleeves 2 ratio 1 size 20mm temp range 55 degree c to plus135 degree c , heat shrinkable sleeves 2 ratio 1 size 30mm temp range 55 degree c to plus135 degree c , heat shrinkable sleeves 2 ratio 1 size 40mm temp range 55 degree c to plus135 degree c , heat shrinkable sleeves 2 ratio 1 size 50mm temp range 55 degree c to plus135 degree c , heat shrinkable sleeves 2 ratio 1 size 60mm temp range 55 degree c to plus135 degree c , heat shrinkable sleeves 2 ratio 1 size 70mm temp range 55 degree c to plus135 degree c , transparent heat shrinkable sleeves 2 ratio 1 size 1 inch temp range 55 degree c to plus135 degree c , through hole resistor axial military 1 ohm , through hole resistor axial military 1k ohm , through hole resistor 2.2k ohm axial military , through hole resistor 10k ohm axial military , through hole resistor axial military moisture resistant weldable metal film rnc60h1002fsb14 , 10 amp relay mount 1 by 2 mtr , 5 amp relay mount 1 by 2 mtr , banana socket red and black, electrical components, frp tape 1, thermal tape 1, teflon tape 1, paper tape 1, role extension board with 100 mtr cable length, 3 pin socket 6 amp, 3 pin socket 16 amp, rj45 connector, mcb 6 amp, mcb 10 amp, 3 pin plug 6 amp, 3 pin plug 16 amp, lacing thread lc136, knife and blade set, soldering lead each per 500 grams, rma soldering flux 1 ltr, lugs red 22 16 awg 31890, lugs red 22 16 awg 36150, lugs 16 6 710030 3, lugs 10 12 710032 2, push button switch red, push button switch black, toggle switch 3 amp, toggle switch 5 amp, toggle switch 10 amp, 5mm red led with housing, 5mm green led with housing, 10mm red led with housing, 10mm green led with housing, wago connector with rail, pcb turret 3 slot, solderable splice 12 awg to 22 awg temperature range 55 degree c to plus 125 degree c cwt 900x, solderable splice 20 awg to 22 awg temperature range 55 degree c to plus 125 degree c cwt 900x, solderable splice 16 awg to 22 awg temperature range 55 degree c to plus 125 degree c cwt 900x, solderable splice 20 awg to 26 awg temperature range 55 degree c to plus 125 degree c cwt 900x, fr4 sheet, dowsil 3145 rtv, dowsil 3140 rtv, heat shrinkable sleeves 2 ratio 1 size 20mm temp range 55 degree c to plus135 degree c, heat shrinkable sleeves 2 ratio 1 size 30mm temp range 55 degree c to plus135 degree c, heat shrinkable sleeves 2 ratio 1 size 40mm temp range 55 degree c to plus135 degree c, heat shrinkable sleeves 2 ratio 1 size 50mm temp range 55 degree c to plus135 degree c, heat shrinkable sleeves 2 ratio 1 size 60mm temp range 55 degree c to plus135 degree c, heat shrinkable sleeves 2 ratio 1 size 70mm temp range 55 degree c to plus135 degree c, transparent heat shrinkable sleeves 2 ratio 1 size 1 inch temp range 55 degree c to plus135 degree c, through hole resistor axial military 1 ohm, through hole resistor axial military 1k ohm, through hole resistor 2.2k ohm axial military, through hole resistor 10k ohm axial military, through hole resistor axial military moisture resistant weldable metal film rnc60h1002fsb14, 10 amp relay mount 1 by 2 mtr, 5 amp relay mount 1 by 2 mtr, banana socket red and black

Unlock Full Tender Access

Start Free Trial to download documents before deadline

T18 Ref No : 16340523
Location : new delhi , delhi
Source : GEM Tenders
LIVE TENDER
tender for yellow envelope a4 , yellow envelope a3 , white envelope , report file , cobra file , double paste file , l folder , visiting card , letter head , i card with lanyard , standee , flex banner , self ink stamp , name plate big , name plate small , single pocket l-folder , a4 cardboard, boq final1, 14 x 10 inch multicolour printed envelope company logo office address and multicolour printing, 16 x 12 inch multicolour printed envelope company logo office address and multicolour printing, 10 x 4.5 inch digital printed envelope company logo office address and multicolour printing, a 4 printed report file company logo office address and multicolour printing, single clip khadi file company logo office address and multicolour printing, printed khadi board file company logo office address and multicolour printing, printed office folder company logo office address and multicolour printing, digital print texture paper company logo office address and multicolour printing, 100 gsm printed sheet company logo office address and multicolour printing, plastic multicolour printing id card along with holder & designing satin cloth lanyard, flex roll-up standee 6x3 feet, multicolour printing in square feet, 1 x 1 circular shape, 1x 1.5 rectangle shape colour embossed letters on rubber with wooden or plastic handle stamp, size 14 x 4 big inches, size 10 x 3 small inches, screen printing hurl logo and office address multicolour lcut sleeve folder in 250 350 gsm, screen printing hurl logo and office address multicolour 2mm green mount board as writing pads

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Green Board. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Green Board sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Green Board Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Green Board, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Green Board Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Green Board Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Green Board.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Green Board depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Green Board Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Green Board bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Green Board. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Green Board, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Green Board, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Green Board?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Green Board tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Green Board?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Green Board, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Green Board is declared L1 and is generally awarded the contract