sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

48Latest Extruded conductor Tenders List

Latest Extruded conductor Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Extruded conductor tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Extruded conductor tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Extruded conductor Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Extruded conductor tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Extruded conductor Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Extruded conductor Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Extruded conductor Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Extruded conductor tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Extruded conductor Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Extruded conductor sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Extruded conductor tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Extruded conductor tenders.

Is EMD mandatory for all Extruded conductor tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Extruded conductor work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Extruded conductor tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Extruded conductor Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17227331
Location : coimbatore , tamil nadu
Source : GEM Tenders
NEW TENDER
corrigendum tender for item 1 , item 2 , item 3 , item 4 , item 5 , item 6 , item 7 , item 8 , item 9 , item 10 , item 11 , item 12 , item 13 , item 14 , item 15 , item 16 , item 17 , item 18 , item 19 , item 20 , item 21 , item 22 , item 23 , item 24 , item 25 , item 26 , item 27 , item 28 , item 29 , item 30 , item 31 , item 32 , item 33 , item 34 , item 35 , item 36 , item 37 , item 38 , item 39 , item 40 , item 41 , item 42 , item 43 , item 44 , item 45 , item 46 , item 47 , item 48 , item 49 , item 50 , item 51 , item 52 , item 53 , item 54 , item 55 , item 56 , item 57 , item 58 , item 59 , item 60 , item 61 , item 62 , item 63 , item 64 , item 65 , item 66 , item 67 , item 68 , item 69 , item 70 , item 71 , item 72 , item 73 , item 74 , item 75 , item 76 , item 77 , item 78 , item 79 , item 80 , item 81 , item 82 , item 83 , item 84 , item 85 , item 86 , item 87 , item 88 , item 89 , item 90 , item 91 , item 92 , item 93 , item 94 , item 95 , item 96 , item 97 , item 98 , item 99 , item 100 , item 101 , item 102 , item 103 , item 104 , item 105 , item 106 , item 107 , item 108 , item 109 , item 110 , item 111 , item 112 , item 113 , item 114 , item 115 , item 116 , item 117 , item 118 , item 119 , item 120, supply of electrical spares, 1600a main moving contacts, cat ref. no. 16d / 16n, movmain 16d, for c&s make acb aha series, 2500 a main isolating contacts (jaw contacts), cat ref. no. 25d / 25n-30s, cs-mic-25d, set of 2, for c&s make acb aha series, 1600 a main isolating contacts (jaw contacts), cat ref. no. 16d / 16n, cs-mic-16d, set of 2, for c&s make acb aha series, 4pole 1600 a arcing contacts, , cat. ref. no. 16d / 16n, cs-arccont-16d, (set of 1 no. fixed 1 no. moving), for c&s make acb aha series, 2500 a acb pole separator (barrier), cat no. pole-septr-20-25, for c&s make acb aha series, 36 way set of three contact block on acb side & six block on cradle side, cat. ref. no. 6d-16d/06n-20s, 4p, cs-aih-3-116 (4p), for c&s make acb aha series, 36 way set of three contact block on acb side & six block on cradle side, cat. ref. no. 20d-25d/25n-30s, 4p, cs-aih-3-220 (4p), current transfomer 1600/0.2 a, cat. ref. no. cs-wmct-164, cs-atbwm-160, for c&s make acb aha series, current transformer 2500/0.2 a, cat. ref. no. cs-wmct-164, cs-atbwm-225 for c&s make acb aha series, shunt trip coil cat. ref. no. 6d-16d /08n 208 & 20d -40d/30s-40s (aha), cs-avh-s-220-xx for c&s make acb aha series, closing coil cat. ref. no. 6d-16d /08n-20s ( aha ) & 20d -40d/30s-41s (aha), cs-avh-c-220-xx for c&s make acb aha series, uv coil ct. ref. no. 6d-16d/06n-20s, cs-auh-v-a-xx for c&s make acb aha series, uv coil cat. ref. no. 20d-40d/25n-40s / 50c-60c , cs-auh-v-b-xx, for c&s make acb aha series, 1600a , 4p frp shutter assebly 6d-16d / 06n-16n, 4 pole, cat. ref. no. ash-1 (4p), for c&s make acb aha series, 2500a , 4p frp shutter assebly 20d-25d/30s, 4 pole cat. ref. no. ash-2 (4p), for c&s make acb aha series, auxillary switch 14 way (7no+7nc) cat. ref. no. 6d-16d/06n-20s cs-axh-7a7b-116, for c&s make acb aha series, auxillary switch 14 way cat. ref. no. 20d-40d/25n-40s / 50c-60c cs-axh-7a7b-22 0, for c&s make acb aha series, arc chutes cat. ref. no. 25d/30s, cs-arccht-25d, for c&s make acb aha series, arc chutes cat. ref. no. 6d-16d/06n-20n, cs-arccht-06d-16d, for c&s make acb aha series, 1600a/2500a closing latch for c&s make acb aha series, micro switch for motor cut off 6d-40d/06n-40s /50c-60c, model- microsw, for c&s make acb aha series, 2500 a trip shaft, for c&s make acb aha series, 1600 a trip shaft, for c&s make acb aha series, supply of c&s make acb, ah-25d 4p edo with micropro-5.1t with complete set, communication module for micropro 4.1/5.1 release. model- cspscm-micropro for c&s make acb aha series, c-power acb 1000a uv coil, 240v, 50hz ac for l&t make, model- sl92720b000, c-power acb 1000a shunt coil, 240v, 50hz ac for l&t make, model- sl927180b00, c-power acb 1000a closing coil, 240v, 50hz ac for l&t make, supply of 3 phase multi function meter rishi master 3440 with support rs port 485., 100 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse1m125atm4p-x., 125 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse1m125atm4p-x, 160 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse2m250atm4p-x, 200 a, 25ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- c&s, winbreak and model no- cse2m250atm4p-x, 63 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv510345., 125 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv516342, 160 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv516343, 200 a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv525342, 250a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv525343, 400a, 36ka, 4 pole mccb, with thermal magnetic release suitable to operate on 440v 50 hz, a/c supply of make- schneider, easypact cvs and model no- lv540309, 10kvar, 3 phase cylindrical capacitors of make epcos, model- - phasecap - tdk epcos, cat no- -b25674l4102j040 complete as required., 20kvar, 3 phase cylindrical capacitors of make epcos, model- - phasecap - tdk epcos, cat no- -b25674l4202j040 complete as required., 25 kvar, 3 phase cylindrical capacitors of make epcos, model- - phasecap - tdk epcos, cat no- -b25674l4252j040 complete as required., cylindrical hrc fuse links type hf of rating 63 amps, make- - l&t, cat no- - sf90159, or equivalent, cylindrical hrc fuse links type hf of rating 40 amps, make- - l&t, cat no- - sf90143, or equivalent, cylindrical hrc fuse links type hf of rating 32 amps, make- - l&t, cat no- - sf90142, or equivalent, cylindrical hrc fuse links type hf of rating 16 amps, make- - l&t, cat no- - sf90150, or equivalent, off set clip in type fuse links type hbc of rating 2 amps, type- cns, iec 269,, off set clip in type fuse links type hbc of rating 4 amps, type- cns, iec 269,, off set clip in type fuse links type hbc of rating 6 amps, type- cns, iec 269,, 63a on-load changeover switch (manual) in sheet steel enclosure, suitable for switching between two power sources (mains and standby supply), with ac-23a utilization category, 4 pole, suitable for 415v, 50hz, three-phase system., supply of 32a motor protection circuit breaker (mpcb), suitable for three-phase motor protection, with adjustable thermal overload and magnetic short-circuit protection, conforming to relevant is/iec standards., 1.5 sq. mm (single core fr-lsh) copper conductor pvc insulated flexible, heat resistant flame retardant low smoke (fr-lsh) grade wires suitable for domestic and industrial purpose (each - 90 mtrs. coil), 2.5 sq. mm (single core fr-lsh) copper conductor pvc insulated flexible, heat resistant flame retardant low smoke (frls) grade wires suitable for domestic and industrial purpose (each - 90 mtrs. coil), 4 sq. mm (single core fr-lsh) copper conductor pvc insulated flexible, heat resistant flame retardant low smoke (fr-lsh) grade wires suitable for domestic and industrial purpose(each - 90 mtrs. coil), 2 core 1.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment)-(each - 100 mtrs. coil), 3 core 1.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 3 core 2.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 3 core 4 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment)- (each - 100 mtrs. coil), 8 core 1.0 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 4 core 2.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), 6 core 1.5 sqmm of pvc insulated and pvc round sheathed, multicore annealed bare copper conductor (flexible) industrial cable for voltage grade 1100 volt, conforming to is 694 - 2010 (upto date amendment) - (each - 100 mtrs. coil), category 6 (cat6) utp lan cable, 4-pair, 23 awg electrolytic grade solid annealed bare copper conductor, hdpe insulated, overall pvc/lszh sheathed, conforming to tia/eia-568-c.2 and iso/iec 11801, suitable for data transmission up to 1 gbps and 250 mhz frequency, complete as required. (each - 100 mtrs. coil), miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. sp mcb, 16 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. dp mcb, 25 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. dp mcb, 40 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. tp mcb, 40 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. fp mcb, 40 a, c curve, miniature circuit breaker (mcb) having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. fp mcb, 63a, c curve, isolator having breaking capacity of 10ka suitable for operation on 230v/415v, 50 hz ac supply. fp isolator, 100a, 5 pin, 32a, 220-440vac, industrial panel socket with plug ip44 waterproof plug socket male female connector (plug & socket), 6 amps modular one way switch of make- - legrand, model- - myrius, cat no- - 6792 00 or equivalent, 16 amps modular one way switch of make- - legrand, model- - myrius, cat no- - 6792 09 or equivalent, 6 amps modular two way switch of make- - legrand, model- - myrius, cat no- - 6792 01 or equivalent, 6 amps modular bell switch of make- - legrand, model- - myrius, cat no- - 6792 20 or equivalent, 6 amps modular socket of make- - legrand, model- - myrius, cat no- - 6792 35 or equivalent, 16 amps modular socket of make- - legrand, model- - myrius, cat no- - 6792 30 or equivalent, blanking plate of make- - legrand, model- - myrius, cat no- - 6792 76 or equivalent, modular 2 module electronic fan regulator of make- - legrand, model- - myrius, cat no- - 6792 39 or equivalent, 2 module modular pvc surface mounting box with base cover plate, 3 module modular pvc surface mounting box with base cover plate, 4 module modular pvc surface mounting box with base cover plate, 6 module modular pvc surface mounting box with base cover plate, 8 module modular pvc surface mounting box with base cover plate, 12 module modular pvc surface mounting box with base cover plate, 6/16amp combined switch and socket, 3 in one, universal s.s. combined, with safety shutter & pvc gang box., dingdong doorbell, electronic suitable for operation in 220v ac supply, havells/crompton or equilant make, 20 w, 1200 mm length, 6500k, indoor surface mounted led batten made up of extruded aluminium/ aluminium alloy housing, integrated electronic driver, milky white, special polycarbonate diffuser, for glare free efficient light distribution along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications. thd lessthan10%, 36w, 1200 mm length, 6500k, indoor surface mounted led batten made up of extruded aluminium/ aluminium alloy housing, integrated electronic driver, milky white, special polycarbonate diffuser, for glare free efficient light distribution along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications. thd lessthan10%, 10w, 600 mm length, 6500k, indoor surface mounted led batten made up of extruded aluminium/ aluminium alloy housing, integrated electronic driver, milky white, special polycarbonate diffuser, for glare free efficient light distribution along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications., 10w min, b22 led bulb made up of integrated electronic driver along with other accessories and suitable for use on 230 volts, 50 hz, single phase, a.c. supply complete as required and as per technical specifications., 10w led type bulkhead luminaire with cool white colour temperature, efficiency of led light fitting minimum 110 lm/w, pf equal to 0.95 or more, thd should be less than 10% , minimum ip 65/66 protection with housing material made of high pressure die cast aluminium /standard alloy suitable for outdoor application suitable for operation on 230 v+/- 10%, 50hz, single phase ac supply and as per technical specification with all its accessories, driver etc. as complete., led flood light led luminaire in die-cast aluminium housing, ip66 flood light suitable for operating on voltage range (120 - 270v ac) single phase, 50hz supply of following rating. rating - 100w, led flood light led luminaire in die-cast aluminium housing, ip66 flood light suitable for operating on voltage range (120 - 270v ac) single phase, 50hz supply of following rating. rating - 200w, led flood light luminaire with secondary optical lens having minimum output of 120 lm/watt and rated power not exceeding 250 watts with 5 years warranty designed with powder coated pressure die cast aluminium housing, frame, ms mounting bracket, integral driver with surge protection, heat resistant toughned glass, conforming to ip 65/ip66 & ik 07 protection etc. complete as required. (led & power drive should meet the aai specifications. rating - 250 w led -bajaj praze f 300l wh nb-a5 tg sd model or equilanet, supply of 45w led type streetlight pole arm mountable luminaire with 5700k colour temperature, efficiency of led light fitting minimum 110lm/w, pf equal to 0.95 or more, thd should be less than 10% , minimum ip 65/66 protection with housing material made of high pressure die cast aluminium /standard alloy suitable for outdoor application with manufacturer name/logo embossed in the housing body or on aluminium plate etc. complete as required, all prewired up to terminal block and suitable for operation on 230 v+/- 10%, 50hz, single phase ac supply and as per technical specification with all its accessories, driver etc. as complete., supply of 12w light dome (white in colour) for garden lights, make crompton solar eclipse or suitable for existing pole., supply of 7w led spot light for lift cabin make- philips, model- starfit next or equivalent, supply of 5w, 1 ft led batten light, led type twin dome red aviation obstacle light fixture low intensity type b as per icao annex-14 , ip 66, operating on 230v ac 50 or 60hz input supply (operating band of 90v to 260v ac) direct mounting type complete as required as per the technical specifications., 1200 mm sweep, 5 star rated, bldc motor ceiling fan suitable for operating on 230 v ac etc., 1400 mm sweep, 5 star rated, ceiling fan suitable for operating on 230 v ac etc., 250 mm sweep exhaust fan with pvc body suitable for operation on 230v single phase ac supply 250 mm sweep,, air circulator, bldc pedestal type, 600 mm sweep, having adjustable height feature, aluminium blades, oscillating feature, suitable for operation in 230v ac supply., 400mm sweep wall fan, 5 star rated with 3 nos. of plastic blade having pull cord control feature & vertical adjustable tilt mechanism, oscillation feature, copper winding motor suitable for operation in 230v ac supply, supply of 2-inch size ball type foot valve, made of heavy-duty ci body with ss strainer and rubber/epdm sealing, suitable for water application, supply of 2-inch (dn50) inline digital water flow meter, suitable for measurement of potable water and sewage water flow, complete with sensor, transmitter, and all necessary accessories, as required., supply of 4-inch inline water flow meter (electromagnetic type), suitable for bulk water measurement, supply of 2-inch flow meter suitable for sewage treatment plant (stp) applications, preferably electromagnetic type, corrosion-resistant, with digital indicator, ip68 protection (sensor), complete with cables and accessories. make- frehing, fmf 2040 series, size- 80mm, supply of smc (sheet moulded compound) junction box of size 300 x 200 x 105 mm, suitable for outdoor pole mounting in street lighting applications, made of high-strength frp or smc material, weatherproof, uv resistant, fire retardant (ul94 v 0), with hinged door (right side), complete with gasket, locking arrangement, and provision for cable entry, suitable for 3-phase or 4-core systems, as per sintex model gsjb 3020(1) or approved equivalent, including all accessories required for proper installation., supply of 12 kv, 3.15 a hrc cartridge fuse (pt fuse) conforming to iec 60282 1, suitable for ht panels, item. pt fuse 11kv 3.15a 12abcna 3.15a bussman (set of 3 nos for r y b phases)., supply of portable high-pressure water jet cleaning system suitable for solar pv module cleaning, comprising motorized pressure pump power- 1800w, pressure- 120 bar, flow rate- 6l per min, voltage- 220v, 50hz, spray gun, high-pressure hose, and necessary accessories., supply of solar photovoltaic (pv) modules of capacity 335 wp, based on crystalline silicon technology with multi-crystalline cells, having a rated power output of 335 wp (plus or minus 2 percenet). the module dimensions shall be approximately 1958 mm x 987 mm, with a weight of around 21.2 kg.m make- renewsys india pvt ltd, model. deserv 3m6h 335 or equivalent, conforming to relevant iec standards (iec 61215 or iec 61730), complete in all respects as per specifications and as directed by the engineer-in-charge., supply of portable digital lux level meter suitable for measurement of illumination levels in lux (lx) and foot-candle (fc), for indoor and outdoor lighting assessment applications. the instrument shall have a measuring range up to at least 200,000 lux with high accuracy of plus or minus 3 percenet or better, and shall be suitable for measurement of light from various sources such as led, fluorescent, metal halide, high-pressure sodium, and incandescent lamps. make- fluke, model- fluke 941 light meter, supply of auto day/night on & off photocell, ldr sensor switch for lighting, water proof, suitable for outdoor usage, 230 v ac, 10a supply complete as required. - make - geltech model- gt-ld308 or equialant., supply of led landing h light suitable to replace existing landing h lights operated at 230v 50hz direct input supply. the fitting housing meets ip-66 dust & moisture proof. designed in accordance with icao aerodrome standards-aerodrome design & operators manual for landing direction indicator landing-t lamp advisory with bas fixing pipe flange. light output colour - white., catalog code- ltl-5w-ui, supply of 200w 6.6a bi-pin halogen lamps. (cat no. 64386 osram or equivalent) as required., supply of single phase preventer (phase failure relay) suitable for protection of 3-phase motors against single phasing, phase reversal, and voltage imbalance. the relay shall operate on 415 v ac, 3-phase, 50 hz supply and shall have built-in phase sequence correction and automatic reset feature. make- selec, model- sppa2m2, supply of 50mm dia dwc hdpe pipe isi marked, acb mechanical interlock set l&t make omega model, suitable exisitng panel, supply of digital hour meter (time totaliser), model ltc9a of selec or approved make list of aai, having 7 and half digit lcd display, suitable for cumulative time measurement with voltage or contact input (24 to 260v ac or dc), panel mounting type, battery powered with memory retention, measuring range up to 199999.99 hours, accuracy plus or minus 0.05 percent, with front or reset facility, complete as required.
Agency / Dept :
airports authority of india AAI
Due Date :
Sep 14, 2026 (2 days left)
Tender Value :
49.71L
View Documents
T18 Ref No : 16886620
Location : palakkad , kerala
LIVE TENDER
tender for xlpe insulated, armoured and screened power cable, single-core, 400 sq.mm, xlpe insulated, armoured and screened power cable, conforming to is: 7098 (part-ii), voltage grade 1.9/3.3 kv (earthed), with stranded compacted aluminium conductor, extru ded xlpe insulation, extruded conductor and insulation screens, non-magnetic aluminium round wire armo uring (nominal dia. 2.0 mm), and outer pvc sheath.
Agency / Dept :
southern railway SR
Due Date :
Sep 25, 2026 (13 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17074644
Location : kupwara , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for sqmm as per tech spec , electrode holder for arc welding 600a capacity fully insulated type as per tech spec , plastic jerrican 20 ltr capacity made from hdpe as per tech spec , hss twist drill bit set 25 pcs 1mm to 13mm in 0.5mm increments as per tech spec , wooden handle for pick axe or mattock 900mm lock as per tech spec att , portable petrol chain saw guide bar 22 inch or 550mm as per tech spec att , replacemenent gude bar for chain saw 22 inch or 56 cm cutting length as per tech spec att , hand saw 16 inch or 400mm or 20 inch or 500mm blade length as per tech spec att , aluminium spirit level 12 inch must be rust proof and should have an extruded aluminium profile as per is 5706 of 1993. , paraquat dichloride 24 percentage sl non selective contact herbicide for weed control packing of 5 ltr pack as per tech spec , felling axe 1.0 kg nominal head weight as per tech spec att , felling axe 3.0 kg nominal head weight as per tech spec att , splitting maul or axe 5.0 kg head weight as per tech spec att , knapsack sprayer 15 litr capacity manually operated piston pump type as per tech spec , long handle sickel for tree branch or lopping or pruning blade length 300-350mm as per tech spec , telescopic tree pruner 1.8m to 3.0m extendable length as per tech spec , hand held regar tying tool or twister for 16 swg and 18 swg annealed binding wire as peer tech spec , telescopic ladder 20 ft extended height made from aluminium alloy as per tech spec att , pp nylon rope 24mm of 100 mtr long high strength light weight 3 strand twisted synthetic rope as per tech spec , hacksaw blade double ended, 300mm or 12 inch nominal length flexible grade for hand hacksaw frame as per tech spec , portable drill machine heavy duty,13mm chuck capacity, 650w min power input as per tech spec , barbed wire cutter or fencing plier 10 inch or 250mm, heavy duty combination type as per tech spec , cutting pliers of length 210 mm with high grade steel and serrated jaws and insulated handles , water leveling tube should be made of heavy duty, crystal clear flexible pvc as per tech spec , fawada of size 150 x 275mm made of high tempered iron mild steel as per tech spec , brick hammer with handle of nominal weight 1.2 kg made of high carbon steel fully killed as per tecch spec ,, tools, hand gloves leather of weight 500gm conforming to iso 21420 of 2020 of 1991 as per tech spec, multipurpose non-slip reusable gloves made of premium grade natural latex or synthetic nitrile rubber as per is-4770 of 1991 as per tech spec, shovel square conforming to is 274 part-1 and 2 of 1981 reaffirmed 2003 nose 14 gauge tata high carbon steel as per tech spec, brick trowel steel of professional grade with a blade length of 305 mm precision- forged from a single piece of high carbon steel as per tech spec, measuring tape of length 5m of 19mm width made of steel as per tech spec, measuring tape of length 30m made of steel as per tech spec, heavy duty 18 inch bolt cutter as per tech spec, collapsible y joint 10 ft long fabricated from ms tube as per tech spec att, collapsible y joint 12 ft long fabricated from ms tube as per tech spec att, ratchat spanner single socket 14mm combination type with 75 teeth ratchet mechanism for 5 deg swing arc as per tech spec, ratchat spanner single socket 13mm chrome vanadium steel 72 teeth ratchet, 12-point socket end as per tech spec, ratchat spanner single socket 12mm combination type chrome vanadium steel as per tech spec, iron cutter heavy duty bosch or equivalent as per tech spec att, abrasive cut off wheel 4 inch dia for angle grinder as per tech spec, abrasive cut off wheel 14 inch dia for chop saw 355mmx3.0mmx25.4mm bore as per tech spec, single piece aluminium ladder made from aluminium alloy 63400-wp as per tech spec att, aluminimum straight edge for floor plastering 50mm square 2mm thick and 1800mm long as per tech spec, portable arc welding machine as per tech spec, welding rod swr-10 size 3.15x350mm conforming to is 814 of 2004 as per tech spec, welding machine earthing cable single core flexible copper conductor 70 sqmm as per tech spec, electrode holder for arc welding 600a capacity fully insulated type as per tech spec, plastic jerrican 20 ltr capacity made from hdpe as per tech spec, hss twist drill bit set 25 pcs 1mm to 13mm in 0.5mm increments as per tech spec, wooden handle for pick axe or mattock 900mm lock as per tech spec att, portable petrol chain saw guide bar 22 inch or 550mm as per tech spec att, replacemenent gude bar for chain saw 22 inch or 56 cm cutting length as per tech spec att, hand saw 16 inch or 400mm or 20 inch or 500mm blade length as per tech spec att, aluminium spirit level 12 inch must be rust proof and should have an extruded aluminium profile as per is 5706 of 1993., paraquat dichloride 24 percentage sl non selective contact herbicide for weed control packing of 5 ltr pack as per tech spec, felling axe 1.0 kg nominal head weight as per tech spec att, felling axe 3.0 kg nominal head weight as per tech spec att, splitting maul or axe 5.0 kg head weight as per tech spec att, knapsack sprayer 15 litr capacity manually operated piston pump type as per tech spec, long handle sickel for tree branch or lopping or pruning blade length 300-350mm as per tech spec, telescopic tree pruner 1.8m to 3.0m extendable length as per tech spec, hand held regar tying tool or twister for 16 swg and 18 swg annealed binding wire as peer tech spec, telescopic ladder 20 ft extended height made from aluminium alloy as per tech spec att, pp nylon rope 24mm of 100 mtr long high strength light weight 3 strand twisted synthetic rope as per tech spec, hacksaw blade double ended, 300mm or 12 inch nominal length flexible grade for hand hacksaw frame as per tech spec, portable drill machine heavy duty,13mm chuck capacity, 650w min power input as per tech spec, barbed wire cutter or fencing plier 10 inch or 250mm, heavy duty combination type as per tech spec, cutting pliers of length 210 mm with high grade steel and serrated jaws and insulated handles, water leveling tube should be made of heavy duty, crystal clear flexible pvc as per tech spec, fawada of size 150 x 275mm made of high tempered iron mild steel as per tech spec, brick hammer with handle of nominal weight 1.2 kg made of high carbon steel fully killed as per tecch spec, cross cut saw 8 ft 2400mm long two man as per tech spec
Agency / Dept :
indian army
Due Date :
Sep 23, 2026 (11 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17038112
Location : vijayawada , andhra pradesh
LIVE TENDER
tender for supply of 24 core, 1sq.mm flexible copper cable; conductor material- plain annealed high conductivity flexible copper conductor; insulation- pvc type d; outer sheath- extruded pvc typest3(black colour); shape- flexible circular; voltage grade-1100v; fire retardant and low smoke( technical specification attached. accepted make:- polycab,finolex,havells,kenter or similar, supply of 24 core, 1sq.mm flexible copper cable; conductor material- plain annealed high construction of nductivity flexible copper conductor; insulation- pvc type d; outer sheath- extruded pvc typest3(black col our); shape- flexible circular; voltage grade-1100v; fire retardant and low smoke( technical specification at tached. accepted make:- polycab,finolex,havells,kenter or similar - warranty period: 30 months after the date of delivery -quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs
Agency / Dept :
south central railway SCR
Due Date :
Sep 21, 2026 (9 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17191057
Location : lucknow , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for supply installation testing and commissioning of 250kva capacity continuous loading outdoor copper wound transformer , provisioning steel tubular pole , erection of steel tubular , brick work with common burnt clay , pdg 15 mm cement plaster , supplying and installaton m.s. cable trays , earthing with g.i. earth plate , providing and fixing g.i. pipe , providing and fixing g.i. strip , supplying and erection of 11 kv triple pole , supplying and erection of two lengths of channel iron , supplying and erection of 11 kv pin insulator , supplying and erection of 11 kv disc insulator , supplying and erection of lightning arrestor , pdg and fixing abc cable , pdg and fixing aluminium ht cables , pdg and fixing shrinkable ht cable , supply of following aluminium conductor armoured cable , sply gland and aluminium lugs , laying of one number xlpe power cable , in the existing masonry , on surface , on cable tray , pdg and fixing fencing , supply fixing fire extinguisher , pdg 6mtr length b class gi pipe pole , erection of metallic pole, supply installation testing and commissioning of one number 250 kva outdoor transformer, supply installation testing and commissioning of 250 kva capacity bee 5 star rated as per bis amended, 11/0.433 kv step down, 3 phase, 50 hz, onan copper wound transformer electrolytic grade 99.9 percentage pure copper, core made of first crgo core grade moh or better, suitable for out door applications with offload tap changer on hv side with manual operation complete with all accessories and safety provisions as per relevant is code including first filling of filtered dehydrated oil, i/c supplying and grouting of suitable m.s. channel with all accessories and transformer shall be confirming to is 2026 part 1 to part 5, is 1180 and as per cpwd specifications complete in all respects etc as required at site. inside of tank shall be painted with varnish or liquid resistant paint. for external surfaces one coat of thermo setting powder paint or one coat of epoxy primer followed by two coats of polyurethane base paint shall be used. is 1180 part 3 shall be referred to for paint thickness for normal to medium corrosive atmosphere. fitting and accessories the following fittings shall be provided, a. two earthing terminals with the earthing symbol, b. oil level gauge indicating oil level at minimum, 30 degree c and maximum operating temperature, c. air release device for non sealed type transformers, d. rating and terminal marking plates, e. silica gel breather, f. drain cum sampling valve 3 by 4 inch nominal size thread, is 554 preferably steel with plug for three phase transformers, g. thermometer pocket with cap, applicable for special repair no h to s in atc, provisioning of 9 mtr height swaged type steel tubular pole confirming is 2713, duly pained suitable for 11kv supply complete with ms base plate etc as required, erection of steel tubular or rail pole strut in cement concrete 1 retio 3 retio 6, 1 cement 3 coarse sand 6 graded stone aggregate 40 mm nominal size foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required., brick work with common burnt clay modular bricks of class designation 7 point 5 in foundation and plinth in, a. cement mortar 1 ratio 4, 1 cement 4 coarse sand., pdg 15 mm cement plaster on the rough side of single or half brick wall of mix a. 1 ratio 4 , 1 cement 4 fine sand, supplying and installaton 300 mm width x 50 mm depth x 1 point 6 mm thickness of perforated painted with powder coating m.s. cable trays with perforation not more than 17point5 percetage, in convenient sections, joined with connectors, suspended from the ceiling with two numbers ms/gi suspenders i/c base of suitable size ms/gi angle, bolts and nuts, painting uspenders, fastener etc as required., earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required., providing and fixing 25 mm x 5 mm g.i. strip in 40 mm dia g.i. pipe from earth electrode including connection with g.i. nut, bolt, spring, washer excavation and re filling etc. as required., providing and fixing 25 mm x 5 mm g.i. strip on surface or in recess for connections etc. as required., supplying and erection of 11 kv triple pole suitable capacity gang operated air break switch 6 insulator, 3 pc. set complete with 25 mm dia. 3m long operating pipe, lock and handle etc. as reqd., supplying and erection of two lengths of channel iron 75 mm x 40 mm x 6 mm 7.14 kg per metre double pole cross arm for three wire 11kv over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm x 6 mm m.s. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc as per drawing and painting with primer and finish paint as required., supplying and erection of 11 kv pin insulator complete with large steel head g.i. pin, nuts, washers etc. as required., supplying and erection of 11 kv disc insulator for 11 kv over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required., supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 kv overhead lines with rated voltage 9 kv rms with a nominal discharge current rating of 5 ka and complete with galvanised clamping arrangement, g.i. bolts, nuts, washers etc. as required., pdg/ fixing abc cable of 11 kv grade with fresh aerial bunched power cable abc cable of 11 kv grade of size 3 core x 35 sq. mm. aluminum conductor cross linked polyethylene insulated xlpe individual core screened a/w load bearing messenger conductor 25 sq mm , confirming to iec 60502 part 1 complete with laying as per site requirement isi., pdg/ fixing 3core 95sq.mm 11kv grade aluminium ht cables, stranded compacted circular aluminium conductor, conductor screen with extruded semi conducting compound, xlpe insulated, insulation screening with extruded semi conducting compound in combination with copper tape, cores laid up, innersheath of pvc, galvanised steel flat strip armoured, and overall pvc sheathed cable conforming to is 7098 part 2 2011 with upto date amendments., pdg and fixing 11kv rating heat shrinkable ht cable termination kit suitable of 3core 95 sq.mm ht cable complete with lugs etc as required m/s raychem / ss make, supply of following size of pvc insulated pvc sheathed 1.1 kv grade aluminium conductor unarmoured/ armoured cable confirming to relevant is specification etc complete as reqd. make bsnl approved make. a. 3.5 x 120sqmm armoured, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed/xlpe aluminium conductor cable of 1 point 1 kv grade as required, a. 3 point 5 x 120 sq mm., laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of size bove 95 sq. mm and upto 185 sq. mm in following manners. a. in the existing rcc/ hume/ metal pipe, b. in the existing masonry open duct, c. on surface, d. on cable tray, pdg and fixing fencing all around transfomer made out of suitable size ms angle iron, ms flat iron, min 3mm dia wire mesh/ jali with provision of lockable gate with in fencing complete as reqd., s/fixing 4.5kg co2 type fire extinguisher with 1.5mtr hose and horn complete as required. isi marked, pdg 6mtr length b class 50mm dia gi pipe pole complete with all accessoroies including s/f of socket, suitable size base plate at bottom etc i/c cutting, threading complete as required., erection of metallic pole of following length in cement concrete 1 ratio 3 ratio 6, 1 cement 3 coarse sand 6 graded stone aggregate 40 mm nominal size foundation including excavation and refilling etc. as required. a. above 4 point 5 meter and upto 6 point 5 meter
Agency / Dept :
bharat sanchar nigam limited BSNL
Due Date :
Sep 30, 2026 (18 days left)
Tender Value :
19.59L
View Documents
T18 Ref No : 17106649
Location : howrah , west bengal
LIVE TENDER
tender for flexible (class-5) annealed tinned copper conductor., flexible (class-5) annealed tinned copper conductor, extruded ebxlepdm insulated, suc h coreslaid up, extruded ebxl eva outersheathed, 600/1000v grade, ebxl cable conforming to edts 1 32, rev-c.size 3 core x 1.5 sq mm. make/brand: thermocables or simillar. - warranty period: 30 months after t he date of delivery
Agency / Dept :
south eastern railway SER
Due Date :
Oct 03, 2026 (21 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16605784
Location : rourkela , odisha
tender for xlpe insulated power cable with stranded aluminium conductor extruded pvc inner sheathed galvanized steel strip armoured except 2 core 10 sqmm and 4 core 10 sqmm extruded pvc type st2 outer sheathed 650 1100 v grade as per is 7098 part 1 1988
Agency / Dept :
national institute of technology NIT
Due Date :
Aug 27, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16312486
Location : baramulla , jammu & kashmir
Source : GEM Tenders
tender for ismb 150 x 75 x5 mm and 6 mtr long - bulb 9 w as per tech spec , pvv ceiling rose 2 by 3 terminal as per tech spec , pvc casing capping square box 4inchx4inch as per tech spec , one way single module flush type modular switch 6a , one module concealed metal flush box of gi as per tech spec , white cover plate with frame 1 module as per tech spec , module 2 concealed metal flush box gi as per tech spec , white cover plate with frame 2 module as per tech spec , cable pcvc insulated unsheahed single core flexible copper conductor as per tech spec , cable pvc insulated unsheathed twin core twisted as per tech spec , pvc casing capping 25mmx6mm as per tech spec , pvc casing capping l bend elbow 25mm as per tech spec , pvc casing capping tee 25mm as per tech spec , pvc casing capping elbow 25mm as per tech spec , ms drywall or cfross recessed screws 20mm as per tech spec , mcb dp 6 amp 10 ka as per tech spec , pvc insulation tape of size 20mm x 10m length as per tech spec , main switch 16a spn or dp as per tech spec , mcb distribution board in sheet metal enclosure 2 way as per tech spec , cable pvc insulated and unsheathed single core with stranded copper conductor as per tech spec , fire extinguisher 6 kg abc- map-90 along with its accessories confirming to is and as per tech spec , jelly filled lightning conductor as per tech specification att , brick trowel steel of professional grade with a blade length of 305 mm as per tech spec , brick hammer with handle of nominal weight 1.2 kg made of high carbon steel fully killed as per tech spec , aluminimum straight edge for floor plastering. 50mm square 2mm thick and 1800mm long as per tech spec , plaster trowel made of high carbon spring steel of min thickness 0.7mm as per tech spec , galvanised iron pan mortar tasla pressed from 16 gauge ms sheet having 400mm dia and depth of 150mm as per tech spec , fish line made of nylon with a min dia of 1.5mm having high tensile str and high visibility colour as per tech spec , plumb bob made of hardened steel iron weighing min 400gms as per tech spec , rammer made of heavy duty cast iron ms the base plate area of approx 150 x 150 mm as per tech spec , picks axes with chiesel and pointed ends kudali 14 cp nominal weight 3.0 kg, overall length minimum 595 mm as per tech spec , showel square nose 14 gauge tata high carbon steel blade size 310 x 245 mm as per tech spec , fawada of size 150 x 275mm made of high tempered iron as per tech spec , painting brush flat of 100mm width as per tech spec , multipurpose non-slip reusable gloves made of premium grade natural latex or synthetic nitrile rubber as per tech spec , aluminium spirit level 12 inch must be rust proof and should have an extruded aluminium profile as per as per tech spec , water leveling tube should be made of heavy duty crystal clear flexible pvc as per tech spec , cutting pliers of length 210 mm with high grade steel and serrated jaws and insulated handles as per tech spec , measuring tape should be heavy duty and a retractable type of length 30m made of steel as per tech spec , measuring tape should be heavy duty and a retractable type of length 5m of 19mm width made of steel as per tech spec , lime powdercem white colour in packet of 20 kg as per tech spec , try square with blade length 300mm and stock length 170mm hardened steel as per tech spec , welding rod swr-10, size 3.15x350mm as per tech spec , wooden flat gurmala as per tech spec , hand rivet gun machine as per tech spec , sieve for sieving fine and coarse aggregate 900x1500mm made of angle iron frameas, ismb 150 x 75 x5 mm and 6 mtr long, sifcon pre fabricated interlocking rcc interlocking blocks of outer size 400x250x300mm and hollow section inner size 360x210x300mm with thickness of slab 25mm as per tech spec., wooden planks 2nd class hard wood 20mm thick 300mm wide 1800 mm long as per tech spec, wooden scantling 2inchx2inchx8 feet conforming to is 14687 of1999 as per tech spec, steel roofing trough of size 1630 x 613 x 180mm made out of 2mm thick hot rolled carbon steel as per tech spec, steel roofing trough of size 1700 x 613 x 180mm made out of 2mm thick hot rolled carbon steel as per tech spec, pbs roll self finished tarfelt hessian base for water proofing as per tech spec, uv stablised virgin high density polyethylene sheet of 400 micron thickness as per tech spec, synthetic enamel paint of og colour for steel surface conforming to is 2932 high gloss as per tech spec, primer shall be red oxide zinc chrome rozc as per tech spec, mineral turpentine oil as per tech spec, prefabricated double steel door of size 1100x1900mm as per tech spec, bullet proof swivel frame with glass of size 610mmx30mmx72mm as per tech spec, ismb 150x75mmx3050mm long as per tech spec, ismb 150x75mmx2.2m long as per tech spec, ismb 150x75mmx0.40m long as per tech spec, steel column section 3.0m long 120x120x6mm as per tech spec, hdpe sand bags of size 75x40cm as per tech spec, deck sheet 3000x975x2.0mm as per tech spec, self drilling tapping hexagonal head screw 5.5x50mm as per tech spec, hot rolled steel equal angle of size 50x50x6mm of length 0.10m as per tech spec, mild steel plate 12mm thick as per tech spec, integral water proofing compound powder form as per tech spec, led tube fitting 1x 18w and 4ft long as per tech spec, led bulb 9w as per tech spec, led inverter bulb 9 w as per tech spec, pvv ceiling rose 2 by 3 terminal as per tech spec, pvc casing capping square box 4inchx4inch as per tech spec, one way single module flush type modular switch 6a, one module concealed metal flush box of gi as per tech spec, white cover plate with frame 1 module as per tech spec, module 2 concealed metal flush box gi as per tech spec, white cover plate with frame 2 module as per tech spec, cable pcvc insulated unsheahed single core flexible copper conductor as per tech spec, cable pvc insulated unsheathed twin core twisted as per tech spec, pvc casing capping 25mmx6mm as per tech spec, pvc casing capping l bend elbow 25mm as per tech spec, pvc casing capping tee 25mm as per tech spec, pvc casing capping elbow 25mm as per tech spec, ms drywall or cfross recessed screws 20mm as per tech spec, mcb dp 6 amp 10 ka as per tech spec, pvc insulation tape of size 20mm x 10m length as per tech spec, main switch 16a spn or dp as per tech spec, mcb distribution board in sheet metal enclosure 2 way as per tech spec, cable pvc insulated and unsheathed single core with stranded copper conductor as per tech spec, fire extinguisher 6 kg abc-map-90 along with its accessories confirming to is and as per tech spec, jelly filled lightning conductor as per tech specification att, brick trowel steel of professional grade with a blade length of 305 mm as per tech spec, brick hammer with handle of nominal weight 1.2 kg made of high carbon steel fully killed as per tech spec, aluminimum straight edge for floor plastering. 50mm square 2mm thick and 1800mm long as per tech spec, plaster trowel made of high carbon spring steel of min thickness 0.7mm as per tech spec, galvanised iron pan mortar tasla pressed from 16 gauge ms sheet having 400mm dia and depth of 150mm as per tech spec, fish line made of nylon with a min dia of 1.5mm having high tensile str and high visibility colour as per tech spec, plumb bob made of hardened steel iron weighing min 400gms as per tech spec, rammer made of heavy duty cast iron ms the base plate area of approx 150 x 150 mm as per tech spec, picks axes with chiesel and pointed ends kudali 14 cp nominal weight 3.0 kg, overall length minimum 595 mm as per tech spec, showel square nose 14 gauge tata high carbon steel blade size 310 x 245 mm as per tech spec, fawada of size 150 x 275mm made of high tempered iron as per tech spec, painting brush flat of 100mm width as per tech spec, multipurpose non-slip reusable gloves made of premium grade natural latex or synthetic nitrile rubber as per tech spec, aluminium spirit level 12 inch must be rust proof and should have an extruded aluminium profile as per as per tech spec, water leveling tube should be made of heavy duty crystal clear flexible pvc as per tech spec, cutting pliers of length 210 mm with high grade steel and serrated jaws and insulated handles as per tech spec, measuring tape should be heavy duty and a retractable type of length 30m made of steel as per tech spec, measuring tape should be heavy duty and a retractable type of length 5m of 19mm width made of steel as per tech spec, lime powdercem white colour in packet of 20 kg as per tech spec, try square with blade length 300mm and stock length 170mm hardened steel as per tech spec, welding rod swr-10, size 3.15x350mm as per tech spec, wooden flat gurmala as per tech spec, hand rivet gun machine as per tech spec, sieve for sieving fine and coarse aggregate 900x1500mm made of angle iron frameas per tech spec, adjustable spanner rench 12 inch conforming to is 4003, hand gloves canvas as per tech spec, steel roofing trough 2438x613x180mm as per tech spec, ismb 150x75mmx6.10m long as per tech spec, ismb 150x75mmx4.90m long as per tech spec, ismb 300x140mm, 3.75m long as per tech spec, ismb 150x75mm, 3.05m long as per tech spec
Agency / Dept :
indian army
Due Date :
Aug 07, 2026
Tender Value :
1.5Cr
View Documents
T18 Ref No : 16136467
Location : piplod , gujarat
Source : GEM Tenders
tender for supply of 200w, 6.6a hirl bi pin halogen type lamp suitable for existing ama make elevated type runway edge light fittings , supply of bi pin lamp holder for ama make elevated type runway or papi or taxi light fitting , supply of 105w, 6.6amp halogen lamp suitable for existing ocem make inset type runway fitting , supply of 200watt, 20a, 6.6a, 5 kv , 50 hz isolating transformers encapsulated in polyester resin , supply of 65watt, 6.6a, 6.6a, 5 kv , 50 hz isolating transformers encapsulated in polyester resin , supply of 300watt, 6.6a, 6.6a, 5 kv , 50 hz isolating transformers encapsulated in polyester resin , 360 clear outer lens for elevated type runway edge light fittings , 360 clear inner lens for elevated type runway edge light fittings , supply of green spreader lens for ama fitting , supply of 180 deg. clear lens right ama fitting , supply of 180 deg. clear lens left ama fitting , supply of 180 deg. yellow inner lens,right for ama fitting , supply of 180 deg. red inner lens,left for ama fitting , supply of 180 deg. yellow inner lens, left for ama fitting , gasket suitable for base plate for elevated type , supply of outer side o ring suitable for existing ocem make , supply of outer side o ring suitable for existing ocem make middle , supply of inner side o ring for existing ocem make runway edge fitting , supply of aluminium reflector suitable for existing ama make , supply of clear or yellow or green or red filter suitable for existing ocem make , supply of clear prism suitable for existing ocem make inset type approch light , supply of clear prism suitable for existing ocem make inset type threshhold light , supply of lower breakable coupling , supply of upper leg pipe for papi for ama make , supply of lower leg pipe for papi for ama make , supply of locking nut left hand threded for ama make , supply of locking nut right hand threded for ama make , supply of threaded adjustment sleeve for ama make , air filter for papi ama make , 2mtr, 2x4 sqmm secondary lead , 0.3mtr, 2x2.5 sqmm secondary lead for led taxiway fitting , 0.3mtr, 2x4 sqmm secondary lead , supply of essna connector kit set suitable for 6 sq. mm. 5kv , supply of essna connector kit set suitable for 16 sq. mm. 5kv , supply of 1 x 6 sq.mm copper conductor pvc insulated, pvc sheathed 5kv runway cable, price bid for supply of glf spare at surat airport for year 2026 27, supply of 200w/6.6a hirl bi - pin halogen type lamp suitable for existing ama make elevated type runway edge light fittings as per icao/car compliance and aai specification etc complete as required. (make-osram -64386 or equivalent)., supply of bi pin lamp holder for ama make elevated type runway/papi/approach/taxi light fitting as per icao/car compliance and aai specification etc complete as required., supply of 105w, 6.6amp halogen lamp suitable for existing ocem make inset type runway fitting as per icao/car compliance and aai specification etc complete as required. (make osram cat no.643339c or equivalent)., supply of 200watt, 20a/6.6a, 5 kv , 50 hz isolating transformers encapsulated in polyester resin, finally moulded in neoprene type rubber and with primary and secondary connections suitable for 5kv series circuit complete as per icao/car compliance and aai specification etc complete as required., supply of 65 watt, 6.6a/6.6a, 5 kv , 50 hz isolating transformers encapsulated in polyester resin, finally moulded in neoprene type rubber and with primary and secondary connections suitable for 5kv series circuit complete as per icao/car compliance and aai specification etc complete as required., supply of 300 watt, 6.6a/6.6a, 5 kv , 50 hz isolating transformers encapsulated in polyester resin, finally moulded in neoprene type rubber and with primary and secondary connections suitable for 5kv series circuit complete as per icao/car compliance and aai specification etc complete as required., 360 clear outer lens for elevated type runway edge light fittings as per icao/car compliance and aai specification etc complete as required., 360 clear inner lens for elevated type runway edge light fittings as per icao/car compliance and aai specification etc complete as required., supply of green spreader lens (suitable for ama make elevated type threshold fitting) as per icao/car compliance and aai specification etc complete as required., supply of 180 deg. clear lens (right) (suitable for ama make elevated type runway edge fitting) as per icao/car compliance and aai specification etc complete as required., supply of 180 deg. clear lens(left) (suitable for ama make elevated type runway edge fitting) as per icao/car compliance and aai specification etc complete as required., supply of 180 deg. red inner lens right (suitable for ama make elevated type runway edge fitting) as per icao/car compliance and aai specification etc complete as required., supply of 180 deg. red inner lens,left (suitable for ama make elevated type runway edge fitting) as per icao/car compliance and aai specification etc complete as required., supply of 180 deg. yellow inner lens,right ( suitable for ama make elevated type runway edge fitting) as per icao/car compliance and aai specification etc complete as required., supply of 180 deg. yellow inner lens,left ( suitable for ama make elevated type runway edge fitting) as per icao/car compliance and aai specification etc complete as required., gasket suitable for base plate for elevated type runway edge/approach/end/threshold fitting complele as required., supply of outer side o ring suitable for existing ocem make inset runway edge fitting/approch (model no- slap-c-st-300-o) /threshold (model no- slth-g-ri-200-o),l-868 base as per icao/car compliance and aai specification etc complete as required., supply of outer side o ring suitable for existing ocem make inset runway edge fitting/approch (model no- slap-c-st-300-o) /threshold (model no- slth-g-ri-200-o),( between fixture and base base ) as per icao/car compliance and aai specification etc complete as required., supply of inner side o ring for existing ocem make runway edge fitting/approch (model no- slap-c-st-300-o) /threshold (model no- slth-g-ri-200-o) ,(o-ring around the dome ) as per icao/car compliance and aai specification etc complete as required., supply of aluminium reflector suitable for existing ama make elevated type threshold/approach /end light fitting as per icao/car compliance and aai specification etc complete as required., supply of clear /yellow /green/red filter suitable for existing ocem make inset type runway edge/approch (model no- slap-c-st-300-o) /threshold (model no- slth-g-ri-200-o) fittings as per icao/car compliance and aai specification etc complete as required., supply of clear prism suitable for existing ocem make inset type approch light (model no- slap-c-st-300-o) fittings as per icao/car compliance and aai specification etc complete as required., supply of clear prism suitable for existing ocem make inset type threshhold light (threshold (model no- slth-g-ri-200-o) fittings.as per icao/car compliance and aai specification etc complete as required., supply of lower breakable coupling ( (swival bracket) including leg plate and point) spares for ama make mk-iii papi unit as per icao/car compliance and aai specification etc complete as required., supply of upper leg pipe for papi(left/right hand threded) for ama make mk-iii papi unit as per icao/car compliance and aai specification etc complete as required., supply of lower leg pipe for papi(left/right hand threded) for ama make mk-iii papi unit as per icao/car compliance and aai specification etc complete as required., supply of locking nut (left hand threded) for ama make mk-iii papi unit as per icao/car compliance and aai specification etc complete as required., supply of locking nut (right hand threded) for ama make mk-iii papi unit as per icao/car compliance and aai specification etc complete as required., supply of threaded adjustment sleeve for ama make mk-iii papi unit as per icao/car compliance and aai specification etc complete as required., air filter for papi ama make, 2 mtr (2x4 sqmm cable)2 pin secondary plug assembly (secondary lead), 0.3 mtr (2x 2.5 sqmm cable) 2 pin secondary plug assembly (secondary lead) with pg11 pvc connector suitable for eleveted taxiway edge led type fitting, 0.3 mtr (2x4 sqmm cable) 2pin socket assembly (secondary lead consist of one male and one female connector), supply of essna connector kit set suitable for 6 sq. mm. 5kv air field lighting (afl) copper conductor cable as required.(a set shall consist of one male and one female connector)., supply of essna connector kit set suitable for 16 sq. mm. 5kv air field lighting (afl) copper conductor cable as required.(a set shall consist of one male and one female connector)., supply of 1 x 6 sq.mm copper conductor pvc insulated, pvc sheathed (inner sheath extruded) galvanised steel strip armoured anti termite and anti rodent treated under ground cable of 5 kv grade confirming to is 1554 as amended upto date and as specified in particular specification.
Agency / Dept :
airports authority of india AAI
Due Date :
Jul 28, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16385154
Location : kunigal , karnataka
Source : GEM Tenders
tender for design manufacturing and supply d gassing unit for sumo cylinder 425kg including tilting arrangement and water tank with water pump for circulation of same water with close loop , design manufacturing and supply d gassing unit for 47.5 kg cylinder and 35 kg cylinder with tilting arrangement with close loop , design manufacturing and supply d pressuring for 425 kg cylinder and 47.5 kg cylinder, 35 kg lotor vot cylinder and 5 kg cylinder all including single station with common manifold with vent line , erection commissioning of 425 kg d gassing unit , erection commissioning of 47.5 kg and 35 kg d gassing unit , erection and commissioning of d pressuring unit for 425 kg, 47.5 kg, 35kg, 5kg , structural work for 425 and 47.5or35 kg cylinder d gassing unit , stacker for lpg cylinder shifting and loading to 425 kg d gassing unit , supply of 4c x 6 sq mm ug armored frls copper cable. as per is 1554 standard conductor, xlpe insulated extruded pvc inner sheathed, steel armored frls pvc outer sheathed conform is 7098 part 1. , shifting and laying of 4c x 6 sq mm ug armored copper cable , excavation into ordinary soft to medium type of soil or with sand and burnt bricks excavated up to depth 0.75 mtr and width 0.4 mtr after cable laying same trench backfilling with sand and burnt brick , supply and laying of 50 x 6mm hot dip galvanized gi earth strips, as per is 3043 , supply of flame proof or weatherproof 3 4th inch flp dc gland ex d gas gr. iiaoriiboriic, zone 1 and 2. fcgorbaliga mak , glanding and termination of 3 4th inch flp dc gland with necessary lugs, ferrules, insulation tape and cable ties etc. , supply and laying of 4 sq mm copper multistrand frls green color earthing wire. it includes 4 sq mm copper ring lug and insulation tape, cable ties etc. , supply and fixing of flameproof or weatherproof on or off flp push button ip 65, ex d gas gr iia, iib, iic zone 1 and 2 cable m19 x 2 nos. , supply and laying of 50 x 50 x 2mm hot dip galvanized gi perforated cable tray with 50 x 25 x 1.6mm hot dip galvanized cable tray cover , miscellaneous jobs including testing and commissioning related work, degassing and depressuring facility, as per tender documents
Agency / Dept :
hindustan petroleum corporation limited HPCL
Due Date :
Aug 03, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Extruded Conductor. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Extruded Conductor sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Extruded Conductor Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Extruded Conductor, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Extruded Conductor Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Extruded Conductor Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Extruded Conductor.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Extruded Conductor depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Extruded Conductor Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Extruded Conductor bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Extruded Conductor. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Extruded Conductor, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Extruded Conductor, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Extruded Conductor?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Extruded Conductor tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Extruded Conductor?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Extruded Conductor, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Extruded Conductor is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All