sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

122Latest Drill sleeve Tenders List

Latest Drill sleeve Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Drill sleeve tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Drill sleeve tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Drill sleeve Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Drill sleeve tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Drill sleeve Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Drill sleeve Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Drill sleeve Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Drill sleeve tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Drill sleeve Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Drill sleeve sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Drill sleeve tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Drill sleeve tenders.

Is EMD mandatory for all Drill sleeve tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Drill sleeve work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Drill sleeve tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Drill sleeve Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17564436
Location : mundra , gujarat
Source : GEM Tenders
NEW TENDER
tender for mechanical tools - drill twist straight shank , file card. , double ended tubular box spanner set , machine reamer parallel , chisel cold flat , chisel cold round nose , machine vice - swivel base , sleeve drill morse , fire buckets 4 buckets , different profile gauges plate type , lapping plate , drill gauges , slip-on forged steel flange , jigs- fixture , bearing extractor , pulley extractor , prick punch , gauge snap go and not go , gauge telescopic set. , angle plate adjustable , angle plate size , anvil with stand , chisel flat , circlip pliers expanding and contracting , different type of engine bearing model , different type of piston model , drift punch copper , engineers stethoscope , files assorted sizes , fuel injection pump dismantl kit , glow plug tester , growler , hammer chipping , hammer plastic , injector testing set ,hand tester , oil pump for dismantling assembling. , radiator pressure cap , rivet sets snap and dolly combined , scraper triangular , tinnmans shear , sheet metal gauge , spanner clyburn , spanner t. flocks for screwing up and up- screwing inaccessible , spark lighter , taps and wrenches - metric , thermostat , timing lighter , valve lifter , vice grip pliers , water pump for dismantling and assembling , liquid penetrate inspection kit , plumb bob , vice hand 50 mm jaw , chisel cross cut , chisel cold round nose , chisel cold diamond point , stone, carborandum , spanner d.e. , bending spring.for g.i. pipe , hydraulic pressure machines . , pick axe , spade , cpvc-upvc pipe cutter , screen welding helmet type fiber , screen welding hand fiber , divider spring 20 cm , tong flat.300-350 mm , hammer ball pein , tip cleaner , multiangle megenetic clamp set , auto darkening welding helmet , anvil , portable abrasive cut off machine , suitable gas cutting table , swagging and flooring tool kit , hammer ball peen , plumb bob , set of rowel punch , rawal tool holder, bit , forge with hand blower , rubber gloves, 3 mm to 12 mm by 0.5 mm h.s.s., 3x5 size, brass or steel wire, set of 10, 12 - 16mm set of 5., 9 mm x 100 mm, 125 mm, no. 0 - 1, 1 - 2, 2 - 3, 3 - 4, 4- 5, each-3 buckets- stand, metric standard, dia. -6, letter drill gauge a to z number drill gauge, 150nb, ansi-b16.5, class-150, 300x200x100 mm approx, universal gear puller 2 or 3 jaws, 100 mm, 25 to 50 mm by 5 mm, set of 6 pieces, 8 - 150 mm, 250x150x175mm, 200x100x200mm, 50 kgs, 10 cm, 15cm and 20cm, 0.25, 0.50, 0.75 and 1.00 mm complete engine-specific bearing set, flat-top, dome-top, dish/concave, valve-relief, trunk, slipper, cast, 15 cm, probe length 200 300 mm, 100 300 mm, pump dismantling - assemly, apprx.3 15 v, battery operat, 110v to 230v ac 50 60 hz, 2a, 0.25 kg with metal handle, 250 gm, up to 600 bar, oil pump for dismantling and assembling set, spring-loaded pressure and vacuum relief cap, 3mm, 4mm, 5mm, 25 cm, 450 mm x 600mm, sheet metal gauge, 15 cm, t-handle socket spanner, hand-operated mechanical spark lighter, metric hand tap set, automotive engine cooling-system thermostat, stroboscopic / inductive pickup type, hand-operated valve spring/lifter, water pump removal and installation tool, portable visible dye penetrant inspection system, 300 g, 50 mm jaw, 6x150 mm, 1-8-3mm x 150 mm, 1-4-5 mm , 6 mm x 150 mm, 15 x 5 x 3.75 cm rough and smooth, double-ended open, internal -external, 5-10 kgs-sq. cm manually operated, pointed and chisel type, hand spade, upto 50 mm, head-mounted, face shield, 200mm, 350mm long, 1 kg with handl, welding torch tip cleaning, metal base 18 x10x10 cm, adjustable, 24 sq. inches working area with stand, hand/bench type, fabrication table, 450 tubing 1/8 3/4 inch, 250gm, 115gm, 8,-0 mm, no 8,10,14, 16, portable, 5000 volts
Agency / Dept :
department of employment and training DET
Due Date :
Oct 19, 2026 (17 days left)
Tender Value :
4.91L
View Documents
T18 Ref No : 17564437
Location : mundra , gujarat
Source : GEM Tenders
NEW TENDER
corrigendum tender for mechanical tools - drill twist straight shank , file card. , double ended tubular box spanner set , machine reamer parallel , chisel cold flat , chisel cold round nose , machine vice - swivel base , sleeve drill morse , fire buckets 4 buckets , different profile gauges plate type , lapping plate , drill gauges , slip-on forged steel flange , jigs- fixture , bearing extractor , pulley extractor , prick punch , gauge snap go and not go , gauge telescopic set. , angle plate adjustable , angle plate size , anvil with stand , chisel flat , circlip pliers expanding and contracting , different type of engine bearing model , different type of piston model , drift punch copper , engineers stethoscope , files assorted sizes , fuel injection pump dismantl kit , glow plug tester , growler , hammer chipping , hammer plastic , injector testing set ,hand tester , oil pump for dismantling assembling. , radiator pressure cap , rivet sets snap and dolly combined , scraper triangular , tinnmans shear , sheet metal gauge , spanner clyburn , spanner t. flocks for screwing up and up- screwing inaccessible , spark lighter , taps and wrenches - metric , thermostat , timing lighter , valve lifter , vice grip pliers , water pump for dismantling and assembling , liquid penetrate inspection kit , plumb bob , vice hand 50 mm jaw , chisel cross cut , chisel cold round nose , chisel cold diamond point , stone, carborandum , spanner d.e. , bending spring.for g.i. pipe , hydraulic pressure machines . , pick axe , spade , cpvc-upvc pipe cutter , screen welding helmet type fiber , screen welding hand fiber , divider spring 20 cm , tong flat.300-350 mm , hammer ball pein , tip cleaner , multiangle megenetic clamp set , auto darkening welding helmet , anvil , portable abrasive cut off machine , suitable gas cutting table , swagging and flooring tool kit , hammer ball peen , plumb bob , set of rowel punch , rawal tool holder, bit , forge with hand blower , rubber gloves, 3 mm to 12 mm by 0.5 mm h.s.s., 3x5 size, brass or steel wire, set of 10, 12 - 16mm set of 5., 9 mm x 100 mm, 125 mm, no. 0 - 1, 1 - 2, 2 - 3, 3 - 4, 4- 5, each-3 buckets- stand, metric standard, dia. -6, letter drill gauge a to z number drill gauge, 150nb, ansi-b16.5, class-150, 300x200x100 mm approx, universal gear puller 2 or 3 jaws, 100 mm, 25 to 50 mm by 5 mm, set of 6 pieces, 8 - 150 mm, 250x150x175mm, 200x100x200mm, 50 kgs, 10 cm, 15cm and 20cm, 0.25, 0.50, 0.75 and 1.00 mm complete engine-specific bearing set, flat-top, dome-top, dish/concave, valve-relief, trunk, slipper, cast, 15 cm, probe length 200 300 mm, 100 300 mm, pump dismantling - assemly, apprx.3 15 v, battery operat, 110v to 230v ac 50 60 hz, 2a, 0.25 kg with metal handle, 250 gm, up to 600 bar, oil pump for dismantling and assembling set, spring-loaded pressure and vacuum relief cap, 3mm, 4mm, 5mm, 25 cm, 450 mm x 600mm, sheet metal gauge, 15 cm, t-handle socket spanner, hand-operated mechanical spark lighter, metric hand tap set, automotive engine cooling-system thermostat, stroboscopic / inductive pickup type, hand-operated valve spring/lifter, water pump removal and installation tool, portable visible dye penetrant inspection system, 300 g, 50 mm jaw, 6x150 mm, 1-8-3mm x 150 mm, 1-4-5 mm , 6 mm x 150 mm, 15 x 5 x 3.75 cm rough and smooth, double-ended open, internal -external, 5-10 kgs-sq. cm manually operated, pointed and chisel type, hand spade, upto 50 mm, head-mounted, face shield, 200mm, 350mm long, 1 kg with handl, welding torch tip cleaning, metal base 18 x10x10 cm, adjustable, 24 sq. inches working area with stand, hand/bench type, fabrication table, 450 tubing 1/8 3/4 inch, 250gm, 115gm, 8,-0 mm, no 8,10,14, 16, portable, 5000 volts
Agency / Dept :
department of employment and training DET
Due Date :
Oct 22, 2026 (20 days left)
Tender Value :
4.91L
View Documents
T18 Ref No : 17564442
Location : bhabhar , gujarat
Source : GEM Tenders
NEW TENDER
tender for scriber 150 mm double ended , hammer sledge double faced 4 kg , spindle key for opening cylinder valve , metal rack 1820x1210x450 mm , first aid box , multi angle magnetic clamp set - metal base 18x10x10 cm- , welding helmet auto darkening type , fire extinguisher soda acid foam type 7 ltr cap , power cutter electrically operated -portable abrasive cut off machine- , swagging and flooring tool kit 45 degree tubing 18 to 34 inch , ag 4 grinder , chuck drill 12 mm capacity with key , tailors card scale triangular , tailoring woodenplastic square , thread cutter 24 , rule - scale- plastic 2460 cm , patern notcher , stand wooden t shaped for hanging dress , electric steam iron 450750 watts 230 v with automatic heat control , machine attachmentzipper foot , machine attachmenttucker foot , machine attachmenthem folder , machine attachmentzigzag foot , glass show case for display of jobs 450 mmx600mmx850 mm , dress for dummies ladies 10 -half- , dress for dummies ladies 12 -full- , dress for dummiesgents 42-full- , electrician screw driver 250mm , philips screw driver set of 5 pieces 100 mm to 300 mm , spanner ring set of 12 6 to 32 mm -metric- , air ratchet with standard accessories , angle plate adjustable 250x150x175mm , cylinder bore gauge capacity 5 meters flexible in case 20 to 160 mm , cylinder liner dry and wet liner press fitand slidefit liner , fuel injection pump dismantling tool kit universal vice , hand shear universal 250mm , insulated screw driver 20 cmx9mm blade , insulated screw driver 30 cmx9mm blade , oil stone 15 cmx5 cmx25 cm , pipe flaring tool , piston ring groove cleaner , radiator cut sectiondown flow , radiator pressure cap, iti bhabhar tools equipment boq, 150 mm double ended, sledge double faced 4 kg, item spindle key for gas cylinder valve application for opening and closing gas cylinder spindle valves material forged carbon steel high strength steel construction heavyduty singlepiece profile square socket suitable for standard cylinder spindle finish chrome plated corrosion resistant length approx 100-150 mm operation easy and safe manual operation compatibility suitable for oxygen co2 argon and other industrial gas cylinders, type heavyduty mild steel ms storage rack overall size 1820x1210x450 mm material crca mild steel with powdercoated finish construction slotted angle boltless knockdown design no of shelves minimum 5 adjustable shelves shelf material ms sheet minimum 08to10 mm thick frame thickness minimum 18to20 mm load capacity minimum 100 kg per shelf -uniformly distributed load- surface finish epoxy polyester powder coating rust and corrosion resistant colour grey bluegrey accessories nuts bolts shelf supports and adjustable levelling feet, type wallmounted portable first aid box material mild steel -ms- abs plastic with powdercoated finish -ms type- size approx 300x240x100 mm -or equivalent- colour white with green cross marking construction sturdy body with hinged door and secure latchlock compartments multiple compartmentstrays for organized storage of first aid items mounting suitable for wall mounting with fixing accessories contents supplied with standard first aid contents as per relevant bisfactory requirements -bandages sterile gauze cotton adhesive tape antiseptic solution scissors safety pins disposable gloves burn dressing triangular bandage crepe bandage eye pad ors etc- application suitable for iti workshops, type multiangle magnetic welding clamp magnetic holder set base size approx 180x100x100 mm material heavyduty steel body with permanent ferrite rare earth magnet holding angles 30degree 45degree 60degree 75degree 90degree and 135degree -or equivalent multiangle capability- magnetic holding force minimum 22 kg -50 lbs- per clamp surface finish powdercoated rust and corrosion resistant application suitable for holding ferrous workpieces during welding soldering brazing pipe fitting fabrication and assembly compatibility suitable for flat round square and angle iron workpieces features strong magnetic grip quick positioning handsfree operation reusable easy to clean accessories supplied as a complete set ready for use warranty minimum 1 year against manufacturing defects, type auto darkening welding helmet helmet material highimpact heatresistant polyamidenylon viewing area minimum 90x35 mm optical class 1112 or better shade range din 9 13 -adjustable- light state din 4 power supply solar cell with replaceable lithium battery sensitivity and delay adjustable sensitivity and delay controls uvir protection permanent din 16 protection headgear adjustable ratchettype headband with tilt and size adjustment applications suitable for mma -arc- migmag tig welding plasma cutting and grinding mode standards conforming to en 175 en 379 ce or equivalent international standards warranty minimum 1 year against manufacturing defects, type portable soda acid mechanical foam fire extinguisher capacity 7 litres body material seamless mild steel -ms- cylinder with corrosionresistant epoxy powdercoated finish extinguishing agent soda acid mechanical foam as applicable operating pressure as per is standard working temperature 5degreec to 55 degree c -or as per manufacturer specification- discharge time minimum 30 seconds discharge range minimum 4 metres mounting supplied with wall mounting bracket accessories discharge hose nozzle operating lever pressure indicator -where applicable- safety pin with seal compliance conforming to is 15683 and manufacturedlicensed as per bis requirements suitable for class a and class b fire hazards -wood paper cloth rubber flammable liquids- warranty minimum 1 year against manufacturing defects, portable electrically operated abrasive cutoff machine 355 mm wheel 254 mm bore 2000 2400 w motor 3800 4100 rpm 220 240 v ac single phase with safety guard workpiece clamp and cutting wheel, type manual swaging and 45degree flaring tool kit flaring angle 45degree tube capacity 18 316 14 516 38 12 58 and 34 material hardened alloy steel yoke flaring bar and swaging adapters application suitable for copper aluminium brass and soft steel tubing flaring type single 45degree precision flare swaging tools complete set of swaging adapters for the specified tube sizes construction heavyduty forged steel yoke with hardened precisionmachined clamping bar accessories flaring bar yoke swaging punchesadapters tube cutterdeburringreaming tool and blowmoulded carrying case finish corrosionresistant black oxidechrome plated finish suitable for refrigeration airconditioning plumbing automotive and general workshop applications warranty minimum 1 year against manufacturing defects, type portable electric angle grinder -ag4- wheel diameter 100 mm -4 inch- rated power 850 1000 w no load speed 10000 12000 rpm spindle thread m10 power supply 220 240 v ac 50 hz single phase switch type slidepaddle switch with safety lock body ergonomic compact doubleinsulated housing accessories side handle wheel guard flange set spannerwrench user manual application suitable for grinding cutting deburring and surface finishing of metal and masonry warranty minimum 1 year against manufacturing defects, keytype drill chuck capacity 15 12 mm heavyduty hardened steel construction precision machined suitable for drilling machine complete with chuck key, triangular tailors card scale approx 30 cm length durable plastic construction clear permanent metric graduations in mm cm suitable for tailoring and garment patternmaking applications, tailoring square lshaped rightangle type made of durable woodplastic approx 12x12 inch with clear metricinch graduations accurate 90degree angle and smooth edges suitable for garment pattern making, thread cutter 24 inch -approx 600 mm- heavyduty manual type with sharp hardened steel blade and durable ergonomic handle suitable for tailoringtextile workshop use, plastic measuring rulescale 24 inch -600 mm- length durable plastic construction with clear and permanent metricinch graduations straight and smooth edges suitable for tailoring and workshop measurement, manual pattern notcher handoperated hardened steel cutting blade durable ergonomic handle suitable for making vu notches on paper and cardboard garment patterns for tailoring applications, wooden tshaped dress hanging stand made from good quality seasoned hardwood sturdy construction with stable base and smooth polished finish suitable for hangingdisplaying dresses and garments in tailoringiti workshop, electric steam iron 450 750 w 230 v ac single phase with automatic heat controladjustable thermostat steam function durable nonstickstainlesssteel sole plate and safety thermal protection suitable for tailoring workshop use, sewing machine zipper foot attachment durable metalalloy construction suitable for standard sewing machines designed for close and accurate stitching along zipper teeth suitable for tailoringgarmentmaking applications, sewing machine tucker foot attachment durable metalalloy construction suitable for standard sewing machines designed for making uniform and parallel tuckspleats in fabric suitable for tailoringgarmentmaking applications, sewing machine hem folder attachment durable metal construction suitable for standard sewing machines designed for uniform folding and stitching of fabric edges suitable for tailoring and garmentmaking applications, sewing machine zigzag foot attachment durable metalalloy construction suitable for standard sewing machines designed for zigzag decorative and general stitching of fabrics suitable for tailoringgarmentmaking applications, item glass showcase for display of jobs overall size 450x600x850 mmtype glass display showcase frame ms aluminium frame with durable finish glass clear toughenedtempered glass shelves minimum 2 3 adjustable glass shelves door lockable glass door base strong and stable base finish smooth corrosionresistant and easy to clean application display of trainee jobs models garments and finished work, ladies dress dummy halfbody type standard size durable fibreplastic body with suitable fabric covering for pinning sturdy construction suitable for garment draping pattern making fitting and display, ladies dress dummy fullbody type size 12 durable fibreabsplastic construction with fabric covering suitable for pinning mounted on sturdy adjustable stand with stable base suitable for garment draping pattern making fitting and display, gents dress dummy fullbody type size 42 durable fibreabsplastic construction with fabric covering suitable for pinning mounted on sturdy adjustable stand with stable base suitable for garment draping pattern making fitting and display, item electrician screwdriver overall length 250 mm type insulated electrician screwdriver material chrome vanadium highcarbon steel tip hardened precisionground handle insulated ergonomic nonslip insulation suitable for electrical work finish corrosionresistant application electrical installation maintenance and iti workshop use, item phillips screwdriver set quantity 5 pieces tip type phillips crosshead length range 100 mm to 300 mm blade material hardened chrome vanadium alloy steel tip precisionground hardened and corrosionresistant handle ergonomic nonslip impactresistant sizes assorted sizes suitable for general electricalmechanical work application electrical maintenance and iti workshop use accessories complete set supplied in suitable holdercase, item ring spanner set quantity 12 pieces type doubleend ring spanner size range 6 to 32 mm -metric- material chrome vanadium steel finish chrome plated corrosion resistant ring profile 6point 12point suitable for standard fasteners marking clearly marked size on each spanner application mechanical fitting maintenance and iti workshop use, item pneumatic air ratchet wrench drive size 12 inch -127 mm- square drive type airoperated pneumatic working pressure 63 bar -90 psi- approx free speed minimum 150 rpm torque minimum 60 nm air inlet 14 inch material heavyduty alloy steel body direction forwardreverse operation accessories standard socketaccessory set air hose connector and suitable case application automobile servicing mechanical maintenance and iti workshop use, item adjustable angle plate size 250x150x175 mm type adjustable tilting angle plate material highquality cast iron steel construction heavyduty rigid and stable adjustment adjustable angle with secure locking arrangement surface machinedground working surfaces finish corrosionresistant application marking fitting machining and workholding operations in iti workshop, item cylinder bore gauge measuring range 20 160 mm type flexible extension type flexible rodcable length approx 5 m accuracy suitable for precision internal bore measurement material hardened steel alloy steel components reading compatible with dial indicator suitable measuring head accessories standard measuring anvilsextension accessories and carrying case application measurement of cylinder bores in automobilemechanical workshop, item cylinder liner sleeve types dry liner and wet liner fit types press fit and slide fit material cast iron alloy cast iron construction precision machined and honed surface smooth uniform and corrosionresistant application automobile engine cylinderliner demonstration and practical training quantity as per requirement representative samples of each type, item fuel injection pump dismantling tool kit type universal heavyduty material chrome vanadium alloy steel application dismantling and assembly of fuel injection pumps tools pullers holding tools spanners sockets and suitable dismantling accessories storage supplied in study tool case use suitable for automobile diesel engine practical training, item universal hand shear length 250 mm type manual hand operated blade material hardened highcarbon steel blades sharp durable and precisionground handle strong ergonomic and nonslip cutting capacity suitable for light sheet metal cloth and general workshop materials construction heavyduty and durable application fitting sheetmetal and iti workshop applications, item insulated screwdriver overall length 200 mm blade diameter 9 mm type insulated electrician screwdriver blade material hardened chrome vanadium alloy steel handle ergonomic nonslip insulated handle insulation suitable for electrical work tip precisionground and hardened application electrical installation maintenance and iti workshop use, item insulated screwdriver overall length 300 mm blade diameter 9 mm type insulated electrician screwdriver blade material hardened chrome vanadium alloy steel handle ergonomic nonslip insulated handle insulation suitable for electrical work tip precisionground and hardened application electrical installation maintenance and iti workshop use, item oil stone sharpening stone size 150x50x25 mm type combination fine grade sharpening stone material aluminium oxide silicon carbide shape rectangular surface uniform flat and smooth application sharpening and honing of cutting tools chisels blades and hand toolsuse suitable for iti fittingworkshop applications, item pipe flaring tool type manual hand operated application flaring of copper aluminium brake pipes tube sizes approx 3 16 mm material hardened steel alloy steel flare type single and double flare construction heavyduty precision machined handle ergonomic nonslip accessories flaring bar yoke and suitable adapters application automobile refrigeration practical training, item piston ring groove cleaner type manual hand operated application cleaning carbon deposits from piston ring grooves material hardened alloy steel cutter adjustable interchangeable cutting blades groove sizes suitable for common automobile engine piston grooves handle ergonomic nonslip grip construction heavyduty and durable accessories interchangeable bladescutters with storage case application automobile engine servicing and iti practical training, item radiator cut section down flow type automotive radiator sectionalcutaway model construction metal radiator core with tanks flow type downflow type coolant flows from upper tank to lower tank cut section transparentopen cut section to show internal construction and coolant flow path components visible upper tank tubes fins lower tank and coolant passages mounting sturdy standbase finish durable corrosionresistant application demonstration of radiator construction cooling system operation and coolant flow in iti automobilemechanic motor vehicle practical training, item radiator pressure cap type automotive radiator pressure cap material stainless steel brass with heatresistant rubber seal pressure rating suitable for standard automotive cooling systems function maintains specified coolingsystem pressure and controls coolant overflow valve pressure relief and vacuum valve seal heatresistant leakproof gasket construction durable and corrosionresistant application automobile cooling system practical training and demonstration
Agency / Dept :
department of employment and training DET
Due Date :
Oct 15, 2026 (13 days left)
Tender Value :
2.52L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17564447
Location : vyara , gujarat
Source : GEM Tenders
NEW TENDER
tender for purchase of tools equipment machinary and furniture item - with socket handle , v block 75 x 38 mm pair with clamps , lifter valve spring , valve spring compressor universal , vice grip pliers , water pump for dismantaling and assembling , pattern punch , plier long nose 150 mm insulated , dimmer starter 3 amp , auto transformer 15 amps , cell phone power source with charger chords for different cell phones , spindle key for co2 gas , spindle key for argon gas , co2 gas pressure regulator set , multi angle magnetic clamp set, metal base 18 x10 x 10 cm , swagging and flooring tool kit 45 degree tubing 1 by 8 to 3 by 4 inch , divider spring 6 inch or 15 cm , knurling tool, diamond, straight and diagonal , standard tap screws m3, m4, m5, m6, m8, m10, m12, m14, m16 , lapping plate 6 inch dia , medium carbon heat treated alloy steel metric studs and bolts along with nuts , caps screws m6, m8, m10, m12 , drill gauges 1 t0 60 , drill gauges a to z , m.s. pipe 150 nb , g.i. pipe 25 mm , jigs and fixture sample, for demonstration , pulleys for v-belt or flat belt , gear spur old damaged to fit 50 mm shaft dia , washer, clutch, keys, jib, cotter and circlip set minimum 25mm size, carbon steel material , drift drill 200 mm hardened and black finish , hammer flat head with handle , scriber 150 mm knurled center position , stud extractor ezy - out , universal scribing block 220 mm , blocks vee 150 x 100 x 100 mm. , angle plate adjustable 150x150x250 mm , file feather edge smooth.150 mm , wooden handle foreged soldering iron copper bit 250 w , interchangeable ratchet socket set with a 12 mm driver size 10 to 32 mm set of 18 socket and attachment , double ended tubular box spanner set with tommy bar. , clamp or vice tool maker 5 cm and 7.5cm set of 2. , machine reamer parallel helical flute 12 mm to 16 mm set of 5 , scraper flat 150 mm. , scraper triangular 150 mm , scraper half round 150 mm , wheel dresser , morse taper sleeves no. 0to1, 1to2,2to3,3to4,4to5, , black board with easel. , wing compass 300mm , punch hollow 5 to 12 mm dia. , trammel 300mm , pocker , snip bent left cut 250mm , stake hatchet with leg. 300 x 200 x 20 mm , stake grooving. 100 x 100 x 300 mm , gauge -snap go and no go 25 to 50 mm by 5 mm. set of 6 piece , gauge plug single ended 5 to 55 by 1 mm. set of 11 , gauge telescopic set. 8-150 mm , sine bar 125 mm. , comparator gauge, complete with stand and brackets. , surface roughness comparison plates n1-n12 grades , carbide wear block 1 mm-2 mm. , tool bit holder as armstrong r.h. , tool bit holder as armstrong l.h. , tool bit holder as armstrong straight. , afro or style comb , open teeth tail comb , facial band or head band , napkin , hair accessories , wax applicator , make-up brush set of 11 , pack and bleach brush , black head remover , bob pins , juda pins , setting clips , hair cutting sheet , dye brush , back view mirror , curling rods with attachments , re-bonding boards , magnifying lamp , wax heater , set of rowel punch 8,10mm , voltmeter m.c. multirange 0 to 70,150,300 and 600v , voltmeter m.c. multirange 0 to 15,30,50 and 75 v , ammeter 0to 500 ma dc , m.c. , ammeter m.i. 0-10 amp panel board type , ammeter m.c. centre zero 5-0-5 amp. , ammeter m.c. 0-1 amp , pliers round nose 200 mm , field regulator 0 to 1000 ohmic, 2 amps , caliper, as per bid specification document
Agency / Dept :
department of employment and training DET
Due Date :
Oct 16, 2026 (14 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17470809
Location : anand , gujarat
Source : GEM Tenders
LIVE TENDER
tender for raw material boq seat valve half inch , assorted carbon resistors 3.9 ohm , 200 k ohm, 180 k ohm each , fusible resistor , ldr, diac, preset, triac, zener diode each , li ion cell 1200 mah 3.7v , metal diode 25a 230v , pnp and npn transistors each , transformer 12v 500ma , trimmer resistor , anchor fastener 10 wedge and sleeve , galvanized nails 4 inch , nails 17 x 1 and 17 x 1.5 , aluminium sheet 32 swg 3 ft. wide , aluminium flat 50x2 mm , c.i. or copper zinc electrode dia 3.15 mm , ci plate 50 x 6 mm , copper or copper oxide powder , hexagonal finish bar hex a f 23 50 , ms channel 75 x 35 x 3 , ms flat 100 x 3 mm , m.s. round bar dia 12 mm , m.s. square bar 25x25 , m.s. square bar 32x32 , brazing alloy ring , pvc round block 2.5 inch x 1 inch , watch glass 3 inch dia. , zinc pieces , boring tool p 30 , concrete drill bit 5mm, 10mm, 12mm each , evaporating dish , funnel 7.5 cm , wiring pulling spring 10m , wooden hammer handle for 500 gram , egg insulator , mercury , mineral wool 3 ft. wide , rubber cork 2.5 cm and 3 cm each sizes , foundation bolt half inch x 6 inch , brass machine screw with nut 2 x 25 mm , tube light choke 40w, 230v , copper sulfate cuso4 , 1 18 pvc aluminium wire , 3 20 pvc aluminium wire , pvc tubing i.d. 7mm , plaster of paris , 1 18 pvc copper wire coil , 3 20 pvc copper wire coil , 7 20 pvc copper wire coil , iso vg 22 oil , oil paper sheet , acetone , aluminium sulfate , brine solution , fe powder , ferric chloride , ferric sulfate , ferrous sulfate , kmno4 potassium permanganate , methanol , mibk methyl isobutyl ketone , naoh sodium hydroxide , potassium , prussian blue , spirit , sulfur powder , a4 size transparent plastic punched folder sheets , blank library books labeling stickers , file handle 3 inch , file handle 5 inch , joint clips 1 inch to 1.25 inch for baton patti , sandpaper 00 grade , board terminal studs male female red and black , flush type board indicator , intermediate switch flush type , modular indicator , pvc fan box concealed , surface mount resistor , 25 w lamp , 40 w lamp , 60 w lamp , 100 w lamp , 200 w lamp , 3 phase indicator lamp r y b , buzzer indicator , capillary tube , cfl lamp 60w , level indicator 10 cm , pipette rubber bulb , silicon controlled rectifier , tube light starter 40w, 230v , tube light stick 40w, 230v , variable illumination controller circuit , control relay 12 v , al bare wire 8 swg , bare g.i. wire 12 swg , bare g.i. wire 8 swg , hookup wire , jumper wire with crocodile pins 2 mtr , morse taper drill sleeve 2-3, 3-4 each , bnc connector , ceramic, trimmer mica capacitors each , copper lug 20 mm dia , dc power connector pin , ferrule with nut dia. 6 mm copper , half round thermocol insulation for pipe half inch i.d. x 2 ft. section , p.u. tubing 3 mm i.d. , pipe die half inch b.s.p , plastic on off valve one by four inch one side thread r.o. valves , pvc casing capping 20 mm , pvc casing capping three by four inch , pvc casing capping cross 20 mm , pvc casing capping elbow 20 mm , pvc casing capping tee 20 mm , flexible pvc conduit 20mm , pvc casing capping 32mm x 16mm , pvc bend 20mm , pvc elbow 20mm , pvc saddle 20mm , pvc tee 20mm, seat valve half inch, assorted carbon resistors 3.9 ohm , 200 k ohm, 180 k ohm each, fusible resistor, ldr, diac, preset, triac, zener diode each, li ion cell 1200 mah 3.7v, metal diode 25a 230v, pnp and npn transistors each, transformer 12v 500ma, trimmer resistor, anchor fastener 10 wedge and sleeve, galvanized nails 4 inch, nails 17 x 1 and 17 x 1.5, aluminium sheet 32 swg 3 ft. wide, aluminium flat 50x2 mm, c.i. or copper zinc electrode dia 3.15 mm, ci plate 50 x 6 mm, copper or copper oxide powder, hexagonal finish bar hex a f 23 50, ms channel 75 x 35 x 3, ms flat 100 x 3 mm, m.s. round bar dia 12 mm, m.s. square bar 25x25, m.s. square bar 32x32, brazing alloy ring, pvc round block 2.5 inch x 1 inch, watch glass 3 inch dia., zinc pieces, boring tool p 30, concrete drill bit 5mm, 10mm, 12mm each, evaporating dish, funnel 7.5 cm, wiring pulling spring 10m, wooden hammer handle for 500 gram, egg insulator, mercury, mineral wool 3 ft. wide, rubber cork 2.5 cm and 3 cm each sizes, foundation bolt half inch x 6 inch, brass machine screw with nut 2 x 25 mm, tube light choke 40w, 230v, copper sulfate cuso4, 1 18 pvc aluminium wire, 3 20 pvc aluminium wire, pvc tubing i.d. 7mm, plaster of paris, 1 18 pvc copper wire coil, 3 20 pvc copper wire coil, 7 20 pvc copper wire coil, iso vg 22 oil, oil paper sheet, acetone, aluminium sulfate, brine solution, fe powder, ferric chloride, ferric sulfate, ferrous sulfate, kmno4 potassium permanganate, methanol, mibk methyl isobutyl ketone, naoh sodium hydroxide, potassium, prussian blue, spirit, sulfur powder, a4 size transparent plastic punched folder sheets, blank library books labeling stickers, file handle 3 inch, file handle 5 inch, joint clips 1 inch to 1.25 inch for baton patti, sandpaper 00 grade, board terminal studs male female red and black, flush type board indicator, intermediate switch flush type, modular indicator, pvc fan box concealed, surface mount resistor, 25 w lamp, 40 w lamp, 60 w lamp, 100 w lamp, 200 w lamp, 3 phase indicator lamp r y b, buzzer indicator, capillary tube, cfl lamp 60w, level indicator 10 cm, pipette rubber bulb, silicon controlled rectifier, tube light starter 40w, 230v, tube light stick 40w, 230v, variable illumination controller circuit, control relay 12 v, al bare wire 8 swg, bare g.i. wire 12 swg, bare g.i. wire 8 swg, hookup wire, jumper wire with crocodile pins 2 mtr, morse taper drill sleeve 2-3, 3-4 each, bnc connector, ceramic, trimmer mica capacitors each, copper lug 20 mm dia, dc power connector pin, ferrule with nut dia. 6 mm copper, half round thermocol insulation for pipe half inch i.d. x 2 ft. section, p.u. tubing 3 mm i.d., pipe die half inch b.s.p, plastic on off valve one by four inch one side thread r.o. valves, pvc casing capping 20 mm, pvc casing capping three by four inch, pvc casing capping cross 20 mm, pvc casing capping elbow 20 mm, pvc casing capping tee 20 mm, flexible pvc conduit 20mm, pvc casing capping 32mm x 16mm, pvc bend 20mm, pvc elbow 20mm, pvc saddle 20mm, pvc tee 20mm
Agency / Dept :
department of employment and training DET
Due Date :
Oct 08, 2026 (6 days left)
Tender Value :
2.02L
View Documents
T18 Ref No : 17460267
Location : jammu , jammu & kashmir
Source : GEM Tenders
LIVE TENDER
tender for dental items - opalescence boost bleaching kit , dycal tubes , sodium hypochlorite solution 3 percent dental , metallic suction tips , dental bite blocks , endo box , light cure calcium hydroxide paste , mta mineral trioxide aggregate , calcium hydroxide premix , metal matrix bands , mylar strips , calcium hydroxide powder , 2 percent chlorhexidine irrigant , pulp devitalizer , hydrogen peroxide 3 percent , bioceramic sealer , cavit temporary filling material , hemostatic gel syringe , composite polishing kit , fiber post kit with drills , rvg sleeves , endo access bur kit , gp cutter electric , retreatment files , dental lubricant oil , rvg film holder , endo access bur single , light cure calcium hydroxide , cidex solution , bp blade no 15 , triple antibiotic paste , electronic apex locator , gp points iso 20 and 25 and 30 , caries detecting dye , tapered fissure diamond bur , dental cotton rolls , bone cutting burs , side vented needles , dental wooden wedges , dental bur box , sterilization self sealing pouch , lead apron with thyroid collar , crown and bridge preparation kit , straight fissure diamond bur , cavity preparation kit , prophy brushes and cups , round diamond burs , saddle matrix system , sectional matrix kit , dental probe straight , dental probe curved , scaler tips set , periosteal elevator , lower third molar forceps , austin cheek retractor , dental cheek retractor , dg 16 probe , push button led air rotor , bp blade handle , spoon excavator , light cure gingival barrier , peeso reamer set , dental mixing pad , protective orange eyewear , peeso reamer , files 31 mm , gingival resin barrier , dentin desensitizer , alveogyl , obturation electronic pen , endo activator ultrasonic , apf gel , pit and fissure sealant , mta putty , endomotor with built-in apex locator, as per atc attached
Agency / Dept :
employees state insurance corporation ESIC
Due Date :
Oct 14, 2026 (12 days left)
Tender Value :
3.67L
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17318202
Location : khordha , odisha
Source : GEM Tenders
LIVE TENDER
tender for title1 , title2 , title3 , title4 , title5 , title6 , title7 , title8 , title9 , title10 , title11 , title12 , title13 , title14 , title15 , title16 , title17 , title18 , title19 , title20 , title21 , title22 , title23 , title24 , title25 , title26 , title27 , title28 , title29 , title30 , title31 , title32 , title33 , title34 , title35 , title36 , title37 , title38 , title39 , title40 , title41 , title42 , title43 , title44 , title45 , title46 , title47 , title48 , title49 , title50 , title51 , title52 , title53 , title54 , title55 , title56 , title57 , title58 , title59 , title60 , title61 , title62 , title63 , title64 , title65 , title66 , title67 , title68 , title69 , title70 , title71 , title72 , title73 , title74 , title75 , title76 , title77 , title78 , title79 , title80 , title81 , title82 , title83 , title84 , title85 , title86 , title87 , title88 , title89 , title90 , title91 , title92 , title93 , title94 , title95 , title96 , title97, procurement of dental consumables, r c help edta, h file stainless steel size no 15 40 length 25 mm set of 06, bur tapering fg diamond for crown and bridge no 848 016, calcium hydroxide with idoform root canal dressing and filling paste in syringe of 2 4 gm, cement zoe reinforced temporary 20 30gm, dental floss, endo access bur kit, endomethasone obturation, flowable composite, gic restorative material, gic luting, gutta percha points 6 percent assorted s2 f1, instruments hand dental root canal treatment set of 6 headstroemm file size 15 40 21 mm length, k flex files 15 40 25mm length, material temporary filling no mix single phase bott of 25 30 gm, points absorbent root canal assorted box of 6 tubes containing, post extraction resorbable fiber based iveolar dressing jar of 10 12 gm, posterior composite, protaper hand files assorted, protaper paper point f1 and f2, protaper rotary file, spray anesthetic surface bott of 100ml, surgical alveolar socket dressing, lignocaine hcl 2 percent with adrenaline 1 ratio 80000 30 ml inj, anticaries fluoride rinse mouth wash with sodium fluoride acidulated phosphate bott of 300-500 ml, benzocaine 20 percent pectin based oral ointment tube of 5 gm, vicryl surgical suture 4 0 20mm 1 2 ciclr, pulp devitaliser non arsenic containing paraformaldehyde 46 percent lidocaine base 37 percent phenol 6 percent paste jar of 4point5 gm, hydrogen peroxide solution with stabilizer ip 20 volume 500 ml bott, knife bard parker blade size 1 fitting commercial no 11 packet of 6, knife bard parker blade size 1 fitting commercial no 12 packet of 6, knife bard parker blade size 1 fitting commercial no 15 packet of 6, cloth napkin absorbent dental disposable 15x15 cm pack of 500, articulating paper, pit and fissure sealant syringe of 1 3 ml, mta based root canal sealer pack of 2 3 gm, crown preparation kit containing 14 15 multilayered diamond titanium nitride coated tips points, bur fissure flat cross cut tungsten carbide for fg 1point2 mm, dental nano composite restorative kit photo cure complete with dual shades for dentine and enamel with translucent shade consisting of syringes of 3point5 4 gm each with etchant and bonding, flowable light cure composite kit complete of four syringes of 2 4 gm each with etchant and bonding, set of six hand niti tapered files 31 mm length with corresponding gutta percha point and paper points complete kit, root canal sealer paste for obturation containing two tubes preloaded syringes, universal self etching cum bonding system sixth generation 1 2 bottles of 4 6 ml each with corresponding applicator tip, reinforced quartz fibre post kit complete with corresponding drills, set of six hand niti tapered files 21 mm length with corresponding gutta percha point and paper points complete kit, set of six hand niti tapered files 25 mm length with corresponding gutta percha point and paper points complete kit, set of six rotary niti tapered files 21 mm length with corresponding gutta percha point and paper points complete kit, set of six rotary niti tapered files 25 mm length with corresponding gutta percha point and paper points complete kit, gates glidden drill sizes number1 6 length 28 mm, endodontic access burs set of 06, gloves size 6point5 non sterile, gloves size 6point5 sterile, gloves size 6 non sterile, mouth mirror, k files stainless steel length 25 mm size no 15 40 set of 6, h files stainless steel size no 15 40 length 21 mm set of, composite finishing and polishing kit, surgeons mask disposable, sodium chloride solution isotonic in nontoxic disposable plastic bott of 500 ml ffs, g p points f1 6 percent, g p points f2 6 percent, g p points s2 6 percent, g p points 4 percent no.20, 2 percent chlorhexidine gluconate, metapex, k file 15 21 mm, k file 15 25 mm, k file 20 21 mm, k file 20 25 mm, spreaders, rotary files sx f3 21mm niti, rotary files sx f3 25mm niti, sterillium bott of 500ml, rvg sensor sleeves pkt of 500, cement mixing spatula, normal saline 0point9 percent, cement mixing pad, tips saliva ejector disposable pack of 100, gutta percha points 2 percent set of 2 boxes of size 15 to 40 and 45 to 80 box of 120, bur round tungsten carbide for ra 2point1 mm, etchant gel, broach nerve canal barbed assorted size pkt of 12, material restorative glass ionomer type 2 for filling containing powder 10-15 gm and liq set of 6, surgical spirit 400 ml, disposable 2 ml syringe, suction tips, dycal paste, desensitising paste stannous fluoride potassium nitrate sod monofluorophosphate tube of 50 gm, distilled water, sterilised surgicl suture black braidd silk 3point0 with 38 mm half circle reverse cutting needle, dental restorative kit light cure, 4 percent niti rotary file with corresponding propater gp, lubricant spray for hand piece, cidex solution glutaraldehyde, straight fissure bur diamond, inter dental cleaning add floss, edta gel
Agency / Dept :
indian navy
Due Date :
Oct 08, 2026 (6 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17374073
Location : thane , maharashtra
Source : GEM Tenders
LIVE TENDER
tender for industrial protective clothing -half sleeve shirt size: 32 with embroidered in spun silk logo: mpf, (construction of , industrial protective clothing -half sleeve shirt size: 34 with embroidered in spun silk logo: mpf, (construction of , industrial protective clothing -half sleeve shirt size: 36 wi th embroidered in spun silk logo: mpf, (c , industrial protective clothing -half sleeve shirt size: 38 with embroidered in spun silk logo: mpf, (c , industrial protective clothing -half sleeve shirt size: 40 wi th embroidered in spun silk logo: mpf, ( , industrial protective clothing -half sleeve shirt size: 42 with embroidered in spun silk logo: mpf, (construction of , industrial protective clothing -half sleeve shirt size: 44 with embroidered in spun silk logo: mpf, (construction of , industrial protective clothing -half sleeve shirt size: 46 with embroidered in spun silk logo: mpf, (c , industrial protective clothing -half sleeve shirt size: 48 with embroidered in spun silk logo: mpf, ( , industrial protective clothing -half sleeve shirt size: 50 with embroidered in spun silk logo: mpf , industrial protective clothing -half sleeve shirt size 54 with embroidered in spun silk logo: mpf , industrial protective clothing -full pant size-28 made from drill cotton dyed cloth(100% cotton) , non , industrial protective clothing -full pant size- 30 made from drill cotton dyed cloth(100% cotton) , no , industrial protective clothing -full pant size- 32 made from drill cotton dyed cloth(100% cotton) , no , industrial protective clothing -full pant size- 34 made from drill cotton dyed cloth(100% cotton) , no , industrial protective clothing -full pant size- 36 made from drill cotton dyed cloth(100% cotton) , no , industrial protective clothing -full pant size- 38 made from drill cotton dyed cloth(100% cotton) , no , industrial protective clothing -full pant size- 40 made from drill cotton dyed cloth(100% cotton) , no , industrial protective clothing -full pant size- 42 made from drill cotton dyed cloth(100% cotton) , no , industrial protective clothing -full pant size- 44 made from drill cotton dyed cloth(100% cotton) , no , industrial protective clothing -full pant size- 46 made from drill cotton dyed cloth(100% cotton) , no
Agency / Dept :
armoured vehicles nigam limited AVNL
Due Date :
Oct 09, 2026 (7 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17498492
Location : raipur , chhattisgarh
Source : GEM Tenders
LIVE TENDER
tender for 20 , flat file second cut 25 cm , flat file bastard 35 cm , hammer ball peen , hammer chipping , hammer mallet , hammer plastic , hand operated crimping tool up to 4mm , hand operated crimping tool up to 10mm , hand vice up to 37 mm , hollow punch set of seven pieces 6mm to 15mm , lifting jack screw 3 ton , lifting jack screw 5ton , lifting jack screw 20 ton , magneto spanner with 8 spanners , magnifying glass 75mm , oil stone , pipe flaring tool , piston ring expander , piston ring remover , piston ring groove cleaner , pliers flat nose 15 cm , pliers round nose 15 cm , insulated side cutting pliers 150 mm , prick punch 15 cm , punch letter 4mm , punch number 4mm , right cut snips 250mm , scraper flat 25 cm , scraper half round 25 cm , scraper triangular 25 cm , spanner t flocks for screwing up and up screwing inaccessible , steel measuring tape in a case 10 meter , stud extractor set of 3 , stud remover with socket handle , temperature gauge with sensor 0 to 100 0c , thermostate , thread pitch gauge metric , tyre pressure gauge with holding nipple , universal puller for removing pulleysbearings , valve lifter , spirit level metal type 2 to 300 mm basic length accuracy , vernier bevel protractor blade with acute angle attachment 300 mm , screw pitch gauge metric , universal scribing block , punch letter set 3 mm , punch number set 3 mm , file knife edge smooth 150 mm , file feather edge smooth 150 mm , feeler gaugegauge feeler , file swiss type needle set of 12 , file card brass or steel wire , pliers combination insulated 150 mm , wooden handle forged soldering iron , spanner double ended , glass magnifying 75 mm , clamp toolmaker 5 cm set of 2 , clamp toolmaker 7 point 5 cm set of 2 , machine reamer parallel helical flute12 to 16mm set of 5 , scraper flat 150 mm , scraper triangular 150 mm , scraper half round 150 mm , chisel cold crosscut and diamond point 9 mm x 150 mm , chisel cold flat9 mm x 100 mm , chisel cold round nose 9 mm x 100 mm , drill chuck with key 12 mm , pipe wrench 400 mm , wheel dresser one for 4 units star dresser with holder length 150 mm , sleeve drill morse set of no , wing compass 254 mm or 300 mm , hand hammer with handle 1000 gm , knurling tool diamond 6mm , knurling tool straight 6mm , knurling tool diagonal 6mm , temperature gauge range 0 to 150 degree c , drill gauges letter drill gauge a to z , drill gauges number drill gauge 1 to 60 , drill gauges metric drill gauge 1 point 5mm , hollow punch straight shank hollow punch sets 5 to 12mm , bearing extractor universal gear puller 2 or 3 jaws adjustable , pulley extractor universal gear puller 2 or 3 jaws adjustable , prick punch100 mm , mallet dia 100 mm x 150 mm , aviation snips straight cut 300 mm , flat headed hammers with handle 750 gm , planishing hammer 250gm , snip bent left cut 250 mm , sine bar 125 mm , digital vernier caliper 0 to 150 mm with least count , engineers try square knife edge150 mm blade , lathe tools hss tipped set , lathe tools bit 6 mm x 75 mm hss carbide , lathe tools bit 8 mm x 75 mm hss carbide , lathe tools bit 10 mm x 75 mm hss carbide , arm strong type tool bit holder right hand , arm strong type tool bit holder left hand , arm strong type tool bit holder straight , stilson wrenches 250 mm , pipe cutter wheel type 6 mm to 25 mm , adjustable pipe chain tonge to take pipesup to 300 mm , adjustable spanner 380 mm long , welding helmet with coloured flame retardant glass , carrier for mounting components such as pb and relay boxes , screw driver 300 mm blade , screw, t and p, as per specification
Agency / Dept :
department of technical education DTE
Due Date :
Oct 28, 2026 (26 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17460232
Location : petlad , gujarat
Source : GEM Tenders
LIVE TENDER
tender for raw material boq - 1.5 sq mm lug u type insulated , 1 18 pvc copper wire , 12 v d.c. lamp , 12 volt cell 23 a , 2 pin male female socket , 2.5 micro f oil filled capacitor , 2.5 sq mm lug ring type insulated , 2.5 sq mm lug u type insulated , 20 swg bare copper conductor binding wire , 22 swg nichrome wire , 3 20 pvc copper wire , 35 sq mm aac aluminium conductor , 35 sq mm aluminium ferrule , 35 swg supper enemelled copper wire , 36 swg supper enemelled copper wire , 50 sq mm aluminium ferrule , 7 20 pvc copper wire , 8 swg copper bare conductor , adjustable pipe hose clamp 0.5 inch , adjustable pipe hose clamp 0.75 inch , adjustable pipe hose clamp 1 inch , adjustable pipe hose clamp 1.5 inch , angle holder , automobile fuse 10 a , automobile fuse 15 a , automobile fuse 20 a , automobile fuse 25 a , automobile fuse 30 a , automobile fuse 5 a , banana male pin , bandage role 3 m x 5 cm , batton holder 6 a , bench vice handle 200 mm length , bend aid , brake oil dot 3 500 ml , burnoul plus tube 10 gram , carbon resistor 1 k ohm 0.5 watt , carbon resistor 2 k ohm 0.5 watt , carbon resistor 3 k ohm 0.5 watt , carbon resistor 0.25 watt, 82 ohm , ceiling fan bearing no.6201 , ceiling fan bearing no.6202 , ceiling fan capacitor connector clamp , cleaning liquid for monitor screen , cotton thread for binding fan winding , countersink head screw m4 x 15 , crocodile clip with insulation red and black , dettol anticeptic liquid 125 ml , diode in4007 , drill bit 6 mm for rcc , drill bit 6 mm hss , drill bit set 2 mm to 12 mm, 1 mm range standard quality , eiodex 40 gram , electronic sequential conrol circuit 4 channel , empire sleeve , fan cover fitting bolt 20 mm x 4 mm , fan sleeve 02 mm , fan sleeve 03 mm , fan sleeve 05 mm , g.i.sheet 2438 x 1219 x 0.5 mm 8 feet x 4 feet , 24 swg , gas lighter long , gear oil ep 90 api gl4 for lathe machine , incandensent lamp 100 w , incandensent lamp 200 w , incandensent lamp 25 w , incandensent lamp 40 w , incandensent lamp 60 w , indicating lamp red color panel mounting type , indicating lamp yellow color panel mounting type , indicating lamp blue color panel mounting type , insulation tape roll red,yellow,green,black , led 5 mm 3 v red color , led 5 mm 3 v yellow color , led 5 mm 3 v black color , led 5 mm 3 v green color , led bulb, 15 watt , m.s. angle 25 mm x 25 mm x 3 mm , m.s. angle 35 mm x 35 mm x 5 mm , m.s. channel ismc 75 x 40 x 4 x 5 mm , m.s. roundbar dia.10 mm , m.s. roundbar dia.25 mm , m.s. roundbar dia.30 mm , m.s. roundbar dia.40 mm , m.s. square bar 25 mm x 25 mm , m.s.flat 100 x 08mm , m.s.rivet 03 mm , mcb gi channel , minilex paper ladheroid , modular indicator , modular single pole mcb 16 a , nut and bolt 1inch size , oil paint colour dark blue , power steering oil , one way gang box , pandent holder , pcb 4 inch x 6 inch , plywood hard board 800 mm x 600 mm x 12 mm , power hack saw machine blade hss 450 mm , pvc grip , pvc pipe flexible 15 mm dia. white colour , pvc pipe flexible 25 mm dia. white colour , red oxide , resin flux 15 graam , rj 45 connector for lan cable , room freshner , soap for hand wash , soframycine tube 30 gram , solder wire , split bolt connector with pin for 35 sq mm aac , sulfuric acid , tap screw m6 x 12 mm , tubelight choke 36 w, 240 v electronic , tubestick, t8,36 w,240 v , ultrasonic mpfi injector cleaning solution , white board duster , white sticker for white board 120 cm x 200 cm , wire brush , wooden screw black four square , zeo lamp red 0.5 watt , zeo lamp, 1.5 sq mm lug u type insulated, 1 18 pvc copper wire, 12 v d.c. lamp, 12 volt cell 23 a, 2 pin male female socket, 2.5 micro f oil filled capacitor, 2.5 sq mm lug ring type insulated, 2.5 sq mm lug u type insulated, 20 swg bare copper conductor binding wire, 22 swg nichrome wire, 3 20 pvc copper wire, 35 sq mm aac aluminium conductor, 35 sq mm aluminium ferrule, 35 swg supper enemelled copper wire, 36 swg supper enemelled copper wire, 50 sq mm aluminium ferrule, 7 20 pvc copper wire, 8 swg copper bare conductor, adjustable pipe hose clamp 0.5 inch, adjustable pipe hose clamp 0.75 inch, adjustable pipe hose clamp 1 inch, adjustable pipe hose clamp 1.5 inch, angle holder, automobile fuse 10 a, automobile fuse 15 a, automobile fuse 20 a, automobile fuse 25 a, automobile fuse 30 a, automobile fuse 5 a, banana male pin, bandage role 3 m x 5 cm, batton holder 6 a, bench vice handle 200 mm length, bend aid, brake oil dot 3 500 ml, burnoul plus tube 10 gram, carbon resistor 1 k ohm 0.5 watt, carbon resistor 2 k ohm 0.5 watt, carbon resistor 3 k ohm 0.5 watt, carbon resistor 0.25 watt, 82 ohm, ceiling fan bearing no.6201, ceiling fan bearing no.6202, ceiling fan capacitor connector clamp, cleaning liquid for monitor screen, cotton thread for binding fan winding, countersink head screw m4 x 15, crocodile clip with insulation red and black, dettol anticeptic liquid 125 ml, diode in4007, drill bit 6 mm for rcc, drill bit 6 mm hss, drill bit set 2 mm to 12 mm, 1 mm range standard quality, eiodex 40 gram, electronic sequential conrol circuit 4 channel, empire sleeve, fan cover fitting bolt 20 mm x 4 mm, fan sleeve 02 mm, fan sleeve 03 mm, fan sleeve 05 mm, g.i.sheet 2438 x 1219 x 0.5 mm 8 feet x 4 feet , 24 swg, gas lighter long, gear oil ep 90 api gl4 for lathe machine, incandensent lamp 100 w, incandensent lamp 200 w, incandensent lamp 25 w, incandensent lamp 40 w, incandensent lamp 60 w, indicating lamp red color panel mounting type, indicating lamp yellow color panel mounting type, indicating lamp blue color panel mounting type, insulation tape roll red,yellow,green,black, led 5 mm 3 v red color, led 5 mm 3 v yellow color, led 5 mm 3 v black color, led 5 mm 3 v green color, led bulb, 15 watt, m.s. angle 25 mm x 25 mm x 3 mm, m.s. angle 35 mm x 35 mm x 5 mm, m.s. channel ismc 75 x 40 x 4 x 5 mm, m.s. roundbar dia.10 mm, m.s. roundbar dia.25 mm, m.s. roundbar dia.30 mm, m.s. roundbar dia.40 mm, m.s. square bar 25 mm x 25 mm, m.s.flat 100 x 08mm, m.s.rivet 03 mm, mcb gi channel, minilex paper ladheroid, modular indicator, modular single pole mcb 16 a, nut and bolt 1inch size, oil paint colour dark blue, power steering oil, one way gang box, pandent holder, pcb 4 inch x 6 inch, plywood hard board 800 mm x 600 mm x 12 mm, power hack saw machine blade hss 450 mm, pvc grip, pvc pipe flexible 15 mm dia. white colour, pvc pipe flexible 25 mm dia. white colour, red oxide, resin flux 15 graam, rj 45 connector for lan cable, room freshner, soap for hand wash, soframycine tube 30 gram, solder wire, split bolt connector with pin for 35 sq mm aac, sulfuric acid, tap screw m6 x 12 mm, tubelight choke 36 w, 240 v electronic, tubestick, t8,36 w,240 v, ultrasonic mpfi injector cleaning solution, white board duster, white sticker for white board 120 cm x 200 cm, wire brush, wooden screw black four square, zeo lamp red 0.5 watt, zeo lamp yellow 0.5 color watt, zeo lamp blue color 0.5 watt
Agency / Dept :
department of employment and training DET
Due Date :
Oct 09, 2026 (7 days left)
Tender Value :
1.04L
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Drill Sleeve. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Drill Sleeve sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Drill Sleeve Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Drill Sleeve, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Drill Sleeve Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Drill Sleeve Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Drill Sleeve.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Drill Sleeve depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Drill Sleeve Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Drill Sleeve bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Drill Sleeve. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Drill Sleeve, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Drill Sleeve, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Drill Sleeve?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Drill Sleeve tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Drill Sleeve?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Drill Sleeve, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Drill Sleeve is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All