Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

243Latest Camera module Tenders List

Latest Camera module Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Camera module tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Camera module tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Camera module Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Camera module tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Camera module Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Camera module Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Camera module Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Camera module tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Camera module Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Camera module sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Camera module tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Camera module tenders.

Is EMD mandatory for all Camera module tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Camera module work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Camera module tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Camera module Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17226347
Location : faridabad , haryana
Source : GEM Tenders
NEW TENDER
tender for supply installation testing and commissioning integration to existing system and camc of cctv at piyala installation , armored ofc cable-12 fibers, supply and installation of armoured cat-6 cable, s&l of power cable 2cx1.5 sqmm armoured cables with testing & commissioning of 1.1 kv grade cables pvc/xlpeinsulated pvc sheathed frls armoured copper conductor cables, s&i ex-d gas group iia, iib flp, wp jb 480x480x280 mm multiway jb with min 8 entries and max 18 entries upto 1inch et with maximum entry 3 on each side(top entry not to be given) along with internal mounting plate of 400x400 mm, s/i mcb 2p 6-16a, s&l concealed hdpe pipes of heavy class conforming to is code 4984 with all necessary fittings with od 32mm, id 26 mm, gigabit 8 port poe switch with spf module casing, ofc accessories and splicing including ofc joint box, patch cable etc required for ofc jointing, flameprooof camera varifocal lens, outdooor 4 mp camera with varifocal lens along with stqc approval, 43 inch led display - 3840x2160 pixels resolutions, 4u metal box, 42u rack - 800mm x1000mm floor standing, crca steel moc, stainless steel camera mouting box for non-flp fix type cameras, network media recorder with storage hdd (32 channel) upto 20 tb support and min 8 sata, hardisk 14 tb with minimum 5 years warranty, media converter giga with sfp module, installation, configration and commisioning of new cctv and nvr system, excavating trench 900mm deep, 750mm wide for laying cables, s&f sand 150 mm on top,150 mm below the cable, minimum 75mm thick class b brick protection on top of cable, back filling trench n finishing top, supply, installation and commissiong of gi poles for mounting cctv of height 8 mts made of medium class 50mm gi pipes with bend at the top for mounting cctv including provision of bracket for fitting complete fixed on structures along with excavation and pcc for erection, integration of new cctv system with the existing cctv system at location along with shifting of existing infrastructure wherever applicable, sfp module, camc year 1, camc year 2, camc year 3

Unlock Full Tender Access

Start Free Trial to download documents before deadline

T18 Ref No : 17231748
Location : mambalam , tamil nadu
Source : GEM Tenders
NEW TENDER
tender for supply, installation, integration, commissioning, testing, training and documentation for rtdct with electrical winches for existing tower testing facility -plcs and related accessories , servo drives, servo motors, servo valve drivers and associated hardware and software, mounting cabinets for servo drives , electrical winch assembly including planetary gear box, drum, sheave pullies,drum wire ropes and related accessories , computer systems, monitors, printer and ups systems , mounting fixtures for electrical winches, sheave pulleys, load diversion fixtures. , communication and interconnecting cables between master control room and vrs, trs, lrs stations and associated hardware and software , load cell cables, junction box for load cell, strain gauge, lvdt and interconnecting cables , cameras, anemometers, thermometers, associated cables and accessories , integration and commissioning , training , amc for 1st year after warranty , amc for 2nd year after warranty , amc for 3rd year after warranty, supply installation integration commissioning testing training and documentation for rtdct for ttrs, main and redundant master plc, slave plcs, i/o modules, processor, related hardware & softwares with perpetual license and mounting cabinets (as per technical specifications given in chapter -4), 64 nos. servo drives, 64 nos. servo motors, 64 nos. servo valve drivers, interconnecting cables and associated hardware & software, mounting cabinets for servo drives (as per technical specifications given in chapter -4), 48 nos. electrical winch assembly including 48 nos. planetary gear box with safety enclosure, 48 nos. winch drum, sheave pullies, drum wire ropes and related accessories (as per technical specifications given in chapter -4), 2 nos. of hmi server pc with monitor, 1 no. client pc with monitor , control desk, printer, 4 nos.of ups (as per technical specifications given in chapter -4), mounting fixtures for 48 electrical winches, mounting fixtures for 48 sheave pulleys, 12 nos. of load diversion fixtures and 48 nos. of diversion pulleys. (as per technical specifications given in chapter -4), communication and interconnecting cables between master control room and vrs, trs, lrs stations and associated hardware and software (as per technical specifications given in chapter -4), 64 nos. load cell connectors and connecting cables, 8 nos. strain gauge points and connecting cables, 8 nos. lvdt points and connecting cables with associated signal conditioning modules for load cells, strain gauges and lvdts, sensor junction box, interconnecting cables from sensor junction box to control room (as per technical specifications given in chapter -4), 6 nos. of cameras for live streaming with display and nvr, 3 nos. of anemometers for wind speed measurement, 1 no. of thermometer for ambient temperature measurement, associated cables and accessories (as per technical specifications given in chapter -4), integration and commissioning of the whole system including hardware and software(as per technical specifications given in chapter -4), integrated development environment (ide) training, operation & maintenance training (as per technical specifications given in chapter -4), non comprehensive amc for the complete system for 1st year (as per technical specifications given in chapter -4), non comprehensive amc for the complete system for 2nd year (as per technical specifications given in chapter -4), non comprehensive amc for the complete system for 3rd year (as per technical specifications given in chapter -4)

Unlock Full Tender Access

Start Free Trial to download documents before deadline

T18 Ref No : 17147911
Location : jamnagar , gujarat
Source : GEM Tenders
LIVE TENDER
tender for arduino mega micro controller 2560 r3 board with power , gsm module sim 800l gprs with sma antennae and interfacings , raspberry pi camera module with night vision ir , radar sensor with interfacing to raspberry based on hlk ld2451 , raspberry pi5 8gb complete kit with power supply and accessories , smps based dual power supply 5v 4a 12v 1a 35w mornsun or equivalent , smps based tripal power supply 5v 6a 12v 1dot5a 24 v 2a 96w mornsun or equivalent , li po battery 4s 5200mah , power fast charger lipo compatible , raspberry pi 4 model b micro controller 8 gb memory , fpv transmitter plus receiver , rc transmitter plus receiver 6 to 10 channel , microsd card 128 gb high speed , battery pack power bank 5v 3a , brushless motor 100 to 200kv range , l298n motor driver with onboard arduino uno , lm 119 high speed comparator set module , collinear construction of axial dipole antenna , gps patch antenna l1andl2 band , brushless motor plus escs , ultra sonic sensors hc sr04 , iot module esp32 nodem cu , atmega 2560 dev board with usb cable for arduino , 20 x 4 lcd display blue backlight jhd equivalent , 35a current sensor module ac dc non invasive split through design proportional voltage output , 400v dc isolated voltage sensor module with serial uart and modbus , current sensor module acs 712 with cable , ir2608 based mosfet driver board with interfacings , servo motor geared 40kg , servo driver 16 ch 12 bit for rapberry pi , camera module sony imx219 8mp with interfacings , dc geared motor 12v 100rpm 300rpm 2 each , metal casings as per prototype , metal fabricated chasis as per design , metal tripod mounting frame as per design , custom ml model , quadcopter frame 550 to 650mm , gimbal for assembly , bnc series male and female connector gold plated , 2 core 0.5 sq mm cable per meter , 3 core 0.5 sq mm cable per meter , 4 core 0.75 sq mm cable per meter , glass fuse holder 1by2inch 3by4 inch and 1 inch 30 each , glass fuse 100 ma 200 ma 500 ma 1 a, 2 a 5 a size 1inch , glass fuse 100 ma 200 ma 500 ma 1 a 2 a 5 a size 3by4inch , wire connector heat sink fasteners , jumper wires all 3 types mbym and mbyf and fbyf 100 each , led 5mm assorted pack of 300 , led 10mm pack of 30 , transistors sl 100 and ck 100 , diodes 1n 4001by1n 4007 100 each , set of resistors 1by4 w 1k 10k 470k 100r and misc , set of capacitors 22pf 470uf 82uf 100uf 10uf 33uf 1000uf and misc 100 each, procurement of components for underwater vehicle scanning system project, arduino mega micro controller 2560 r3 board with power, gsm module sim 800l gprs with sma antennae and interfacings, raspberry pi camera module with night vision ir, radar sensor with interfacing to raspberry based on hlk ld2451, raspberry pi5 8gb complete kit with power supply and accessories, smps based dual power supply 5v 4a 12v 1a 35w mornsun or equivalent, smps based tripal power supply 5v 6a 12v 1dot5a 24 v 2a 96w mornsun or equivalent, li po battery 4s 5200mah, power fast charger lipo compatible, raspberry pi 4 model b micro controller 8 gb memory, fpv transmitter plus receiver, rc transmitter plus receiver 6 to 10 channel, microsd card 128 gb high speed, battery pack power bank 5v 3a, brushless motor 100 to 200kv range, l298n motor driver with onboard arduino uno, lm 119 high speed comparator set module, collinear construction of axial dipole antenna, gps patch antenna l1andl2 band, brushless motor plus escs, ultra sonic sensors hc sr04, iot module esp32 nodem cu, atmega 2560 dev board with usb cable for arduino, 20 x 4 lcd display blue backlight jhd equivalent, 35a current sensor module ac dc non invasive split through design proportional voltage output, 400v dc isolated voltage sensor module with serial uart and modbus, current sensor module acs 712 with cable, ir2608 based mosfet driver board with interfacings, servo motor geared 40kg, servo driver 16 ch 12 bit for rapberry pi, camera module sony imx219 8mp with interfacings, dc geared motor 12v 100rpm 300rpm 2 each, metal casings as per prototype, metal fabricated chasis as per design, metal tripod mounting frame as per design, custom ml model, quadcopter frame 550 to 650mm, gimbal for assembly, bnc series male and female connector gold plated, 2 core 0.5 sq mm cable per meter, 3 core 0.5 sq mm cable per meter, 4 core 0.75 sq mm cable per meter, glass fuse holder 1by2inch 3by4 inch and 1 inch 30 each, glass fuse 100 ma 200 ma 500 ma 1 a, 2 a 5 a size 1inch, glass fuse 100 ma 200 ma 500 ma 1 a 2 a 5 a size 3by4inch, wire connector heat sink fasteners, jumper wires all 3 types mbym and mbyf and fbyf 100 each, led 5mm assorted pack of 300, led 10mm pack of 30, transistors sl 100 and ck 100, diodes 1n 4001by1n 4007 100 each, set of resistors 1by4 w 1k 10k 470k 100r and misc, set of capacitors 22pf 470uf 82uf 100uf 10uf 33uf 1000uf and misc 100 each
T18 Ref No : 17132328
Location : nadia , west bengal
Source : GEM Tenders
LIVE TENDER
tender for arduino uno , ultrasonic sensor , servo motor , soil moisture sensor , relay module , pump , pir sensor , dht11 sensor , lcd display , ir sensor , rtc module , rfid reader , mq135 sensor , accelerometer , motor driver , rf module , flame sensor , dc fan , keypad , bluetooth module , pulse sensor , push button , gsm module , vibration sensor , ldr sensor , mq2 gas sensor , camera module , sd card module , bmp180 sensor , gps module , turbidity sensor , ph sensor , current sensor , uv sensor , load cell , hx711 , wi-fi module , laser module , microphone module , dust sensor , magnetic reed switch , nrf24l01 transceiver , ir temperature sensor , magnetometer module , solar panel , water heater , esp8266 , fingerprint sensor , diode , escs , propellers , rotary encoder , remote control , pulse oximeter sensor , magnetic door switch , dht22 , flex sensor , mq7 gas sensor , amplifier module , led display , speed sensor , ecg sensor , oled display , hall effect sensor , touch sensor , transmitter and receiver coil , 8x8 led matrix , raspberry pi , tds sensor , voltage sensor , triac , counter display , humidifier , mp3 player module , jumper wire -m to m , jumper wire-m to f , jumper wire -f to f , potentiometer , motors , wheels, lab consuambles, big ic, hc-04, sv90, 5v, single ch, module, 16x2 with i2c, with card and tag, mpu6050, l293d motor driver shield, transmitter and receiver, mini, 5v module, 5vf, 5/6v, small, 3.3v, for arduino, different sets, good, zero2w amd pi3, 20cm, 10k and 100k, bo motor

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Camera Module. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Camera Module sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Camera Module Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Camera Module, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Camera Module Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Camera Module Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Camera Module.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Camera Module depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Camera Module Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Camera Module bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Camera Module. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Camera Module, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Camera Module, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Camera Module?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Camera Module tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Camera Module?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Camera Module, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Camera Module is declared L1 and is generally awarded the contract