sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

84Latest Aluminum cap Tenders List

Latest Aluminum cap Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Aluminum cap tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Aluminum cap tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Aluminum cap Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Aluminum cap tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Aluminum cap Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Aluminum cap Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Aluminum cap Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Aluminum cap tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Aluminum cap Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Aluminum cap sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Aluminum cap tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Aluminum cap tenders.

Is EMD mandatory for all Aluminum cap tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Aluminum cap work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Aluminum cap tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Aluminum cap Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 16993192
Location : hyderabad , telangana
Source : GEM Tenders
LIVE TENDER
tender for 1. filter papers or blotting - 46 x 57 cm size- 100 per pk , 2. aluminum foil - 1 kg capacity - 1 per pk , 3. butter paper laboratory - white colour size 10 inch x 10 inch parchment paper- 100 sheet per pk , 4. ceramic motar and pestel -ns 203.2 mm 8 inch - 1 per pk , 5. gel pack ice - 500 ml - 1 per pk , 6. laboratory weighing balance cleaning brush -soft brush- 10 per pk , 7. plastic stand for ria vials -capacity 5 ml - 1 per pk , 8. seive stainless steel - dia 200 mm x height 50 mm, 75 microns seive - 1 per pk , 9. whattmann filter papers no.1 - 150 mm dia- 100 per pk , 10. whattmann filter papers no.1 - 125 mm dia 100 per pk , 11. cello tape white 1 inch -24 mm 1 inch transparent - 1 per pk , 12. cello tape white 2 inch- 48 mm 2 inch transparent - 1 per pk , 13. cello tape brown 2 inch -49 mm 2 inch - 1 per pk , 14. laboratory apron -size 42 cm- 1 per pk , 15. laboratory apron -size 44 cm- 1 per pk , 16. tissue rolls -white and linter free - 1 per pk , 17. teflon tape for sealing - white, half inch , 10 meter - 10 per pk , 18. tough spots self- adhesive labels assorted colours -9.5 mm red, green, blue, yellow one each -1 per pk , 19. mask or surgical mask disposable face - disposable- 50 per pk , 20. injection vial with slit screw caps 2 ml, 9 mm for lcms ms -ptfe, white silicone pre slit septa, 2 ml - 100 per pk , 21. injection vials with cap 2 ml, 9 mm for gcms ms- ptfe, white silicone septa, 2 ml- 100 per pk , 22. injection vial or centrifuge tube holding tray- 2 ml- 1 per pk , 23. c18 cartridge -0.5 g, 6 cc- 30 per pk, misc chemicals glassware consumables pmd 2026, 1. filter papers or blotting - 46 x 57 cm size- 100 per pk, 2. aluminum foil - 1 kg capacity - 1 per pk, 3. butter paper laboratory - white colour size 10 inch x 10 inch parchment paper- 100 sheet per pk, 4. ceramic motar and pestel -ns 203.2 mm 8 inch - 1 per pk, 5. gel pack ice - 500 ml - 1 per pk, 6. laboratory weighing balance cleaning brush -soft brush- 10 per pk, 7. plastic stand for ria vials -capacity 5 ml - 1 per pk, 8. seive stainless steel - dia 200 mm x height 50 mm, 75 microns seive - 1 per pk, 9. whattmann filter papers no.1 - 150 mm dia- 100 per pk, 10. whattmann filter papers no.1 - 125 mm dia 100 per pk, 11. cello tape white 1 inch -24 mm 1 inch transparent - 1 per pk, 12. cello tape white 2 inch- 48 mm 2 inch transparent - 1 per pk, 13. cello tape brown 2 inch -49 mm 2 inch - 1 per pk, 14. laboratory apron -size 42 cm- 1 per pk, 15. laboratory apron -size 44 cm- 1 per pk, 16. tissue rolls -white and linter free - 1 per pk, 17. teflon tape for sealing - white, half inch , 10 meter - 10 per pk, 18. tough spots self-adhesive labels assorted colours -9.5 mm red, green, blue, yellow one each -1 per pk, 19. mask or surgical mask disposable face - disposable- 50 per pk, 20. injection vial with slit screw caps 2 ml, 9 mm for lcms ms -ptfe, white silicone pre slit septa, 2 ml - 100 per pk, 21. injection vials with cap 2 ml, 9 mm for gcms ms- ptfe, white silicone septa, 2 ml- 100 per pk, 22. injection vial or centrifuge tube holding tray- 2 ml- 1 per pk, 23. c18 cartridge -0.5 g, 6 cc- 30 per pk
Agency / Dept :
national institute of plant health management NIPHM
Due Date :
Sep 18, 2026 (6 days left)
Tender Value :
4.08L
View Documents
T18 Ref No : 16956493
Location : daman , daman and diu
Source : GEM Tenders
LIVE TENDER
tender for regulator , modular 1 way switch 6amp , modular 2 way switch 6amp , modular 1way switch 20amp , modular 5 pin socket 6amp , modular 5 pin socket 16amp , modular plate board all size , modular mcb type 10 amp , modular mcb type 25 amp , casing capping 1 inch , capacitor for ceiling fan 2 5mfd , five in one plug socket 6 amp , hook up wire , screw 15mm , ampere meter 1a analog type , ampere meter 5a analog type , volt meter 500v analog type , hacksaw blade 12 x 18 tpi hss miranda , hacksaw blade 12 x 24 tpi hss miranda , boiler suit , welding hose pipe oxygen cylinder steel wire reinforcement black colour , welding hose pipe acetylene cylinder steel wire reinforcement red colour , hose clamp , wd 40 spray 420 ml , suction service valve outdoor brass 1 2 , suction service valve outdoor brass 5 8 , r 22 refrigerant , r 134a refrigerant , black rubber superlon insulation 5 8 half , heavy duty portable high pressure washer pump 1900w powerful motor max 150 bar 10 l min water flow rate copper motor domestic use for ac cleaning , ac service cleaning cover for split ac indoor unit waterproof service bag kit for washing , manual butane gas brazing blow torch flame gun , butane gas , 1 5 v pencil cell , paint brush 2inch , insulation tape , refrigerator door bulb thread type , refrigerator door bulb clamp type , copper tube 1 2thita , acteylene c2h2 gas , oxygen o2 gas , nitrogen n2 gas , hacksaw blade 12 x 18 tpi hss miranda , hacksaw blade 12 x 24 tpi hss miranda , hacksaw blade 12 alloy , hacksaw machine blade 450 mm x 10 tpi miranda , hack saw frame fixed 300 mm bosch or taparia , s s wire brush 5 rows and 3 rows , safety boots for welders size 7 8 9 10 , black goggles for arc welding , die penetrant testing kit , anti spatter spray can 100 to 300 ml , earth clamp 600a , hacksaw blade 12 hss , emery paper 80 no , power hacksaw blade 450 x 32 x 1 60 mm 10 , ms electrodes mangalam e 6013 3 15 mm , ms electrodes mangalam e 6013 4 00 mm , machine hackshaw blade 14x1 25x0 062 inch , silicon carbide grinding wheel c180l15v o d 200mm i d 31 75mm , aluminum oxide grinding wheel a180l15v o d 200mm i d 31 75mm , lubrication oil 20w40 , hydraulic oil 68 26 liter x 3 can , gear oil 90 5 liter x 4 tin , cotton waste , cleaning brush nylon 100mm , washing powder , dettol soap , safety goggles glass , m s round bar diameter 50mm , m s round bar diameter 40 mm , white urea formaldehyde compression moulding powder 25kg x 1 bag , hydraulic oil grade 68 26 liter x 2 can , emery sand paper sheet 80 grit , emery sand paper sheet 320 grit , acrylic plexiglass sheet cutter scoring knife tool with 10 blades , acrylic sheet pasting glue 20 gm cyanoacrylate adhesive , chlorophome liquid pure 100ml x 2 bottle , m s flat 50mm x 10mm thick kg equi to 5 mtr , hack saw blade size 12 x 1 2 x 0 025 hi speed steel 18 tpi , cotton polishing wheel cloth buffing pad grinding tools size 200 mm , safety shoes , ms round bar 50 mm , aluminum round bar 50 mm , cleaning brush 100 mm , cotton waste , lubricating oil 1 tin 5 liter , file card , grinding wheel carbide , ms round bar 40 mm , aluminium round bar 40 mm , fabric cotton printed , fabric cotton plain , polyester fabric , polyester fabric printed , astar fabric , canvas thin , canvas thick sticky , brown paper , hand needle no 9 , hand needle no 7 , machine needle db 1 no 14 juki machine , machine needle db 1 no 16 juki machine , dressmakers pins , jewelry making instrument sets ,, consumable materials for all trades, pop black screw 15mm, pop black screw 25mm, pop black screw 35mm, three pin plug socket 6a, power plug with box 16a, single way switch piano type 15a, three pin plug socket 15a, single way switch piano type 5a, capacitor for ceilling fan 2 5 mfd, 36 swg cu winding wire, casing capping wirring patti 25 mm, pvc conduit pipe 19 mm, 1 way gang box, flexible pipe 19 mm, modular switch 6a, modular switch 16a, modular regulator 4 step switch type, modular regulator 5 step socket type, 1 sq mm fire resistance cu wire assorted colour, 1 5 sq mm fire resistance cu wire assorted colour, 2 5 sq mm fire resistance cu wire assorted colour, single pole mcb 16a, single pole mcb 20a, single pole mcb 25a, two pole mcb 25a, pvc mcb box 2 pole, regulator 4 step, regulator 5 step, modular socket 6a, 36 swg copper winding wire, aluminum bare conductor 10 swg, 10 s w g bare copper conductor, 20 s w g bare copper conductor, masson drill bit, soldering wire 18 swg 60 40, 3 core cable 1 5 3, 3 core cable 2 5 3, safety belt standard quality, bus bar with brackets 1mtr each, 40 w tube light fitting, 20 w led tube light, polyolefin heat shrinkable sleeves wiring harness size 1mm to 150mm for industrial, ml contactor 25a 3p 415v ac in built 2no 2nc ac 3 220v ac coil 50 hz, lrd thermal overload relays 7 10 a class 10a, analog timer for star delta statr 800sd 2 230vac size 22 5mm, proxmitey sensor 180mm sensing rang 06 mm, black waterproof outdoor motion sensor sensor detector use with lights for night sensor module, tandem dynamometer metarvi st 09 socket polarity tester for industrial, taparia 27 pcs square drive hex socket set s 11hxl, lcr p1 multifunction transistor capacitor tester, smart celling fan wall switch, modular smart regulator, modular 1 way switch 6amp, modular 2 way switch 6amp, modular 1way switch 20amp, modular 5 pin socket 6amp, modular 5 pin socket 16amp, modular plate board all size, modular mcb type 10 amp, modular mcb type 25 amp, casing capping 1 inch, capacitor for ceiling fan 2 5mfd, five in one plug socket 6 amp, hook up wire, screw 15mm, ampere meter 1a analog type, ampere meter 5a analog type, volt meter 500v analog type, hacksaw blade 12 x 18 tpi hss miranda, hacksaw blade 12 x 24 tpi hss miranda, boiler suit, welding hose pipe oxygen cylinder steel wire reinforcement black colour, welding hose pipe acetylene cylinder steel wire reinforcement red colour, hose clamp, wd 40 spray 420 ml, suction service valve outdoor brass 1 2, suction service valve outdoor brass 5 8, r 22 refrigerant, r 134a refrigerant, black rubber superlon insulation 5 8 half, heavy duty portable high pressure washer pump 1900w powerful motor max 150 bar 10 l min water flow rate copper motor domestic use for ac cleaning, ac service cleaning cover for split ac indoor unit waterproof service bag kit for washing, manual butane gas brazing blow torch flame gun, butane gas, 1 5 v pencil cell, paint brush 2inch, insulation tape, refrigerator door bulb thread type, refrigerator door bulb clamp type, copper tube 1 2thita, acteylene c2h2 gas, oxygen o2 gas, nitrogen n2 gas, hacksaw blade 12 x 18 tpi hss miranda, hacksaw blade 12 x 24 tpi hss miranda, hacksaw blade 12 alloy, hacksaw machine blade 450 mm x 10 tpi miranda, hack saw frame fixed 300 mm bosch or taparia, s s wire brush 5 rows and 3 rows, safety boots for welders size 7 8 9 10, black goggles for arc welding, die penetrant testing kit, anti spatter spray can 100 to 300 ml, earth clamp 600a, hacksaw blade 12 hss, emery paper 80 no, power hacksaw blade 450 x 32 x 1 60 mm 10, ms electrodes mangalam e 6013 3 15 mm, ms electrodes mangalam e 6013 4 00 mm, machine hackshaw blade 14x1 25x0 062 inch, silicon carbide grinding wheel c180l15v o d 200mm i d 31 75mm, aluminum oxide grinding wheel a180l15v o d 200mm i d 31 75mm, lubrication oil 20w40, hydraulic oil 68 26 liter x 3 can, gear oil 90 5 liter x 4 tin, cotton waste, cleaning brush nylon 100mm, washing powder, dettol soap, safety goggles glass, m s round bar diameter 50mm, m s round bar diameter 40 mm, white urea formaldehyde compression moulding powder 25kg x 1 bag, hydraulic oil grade 68 26 liter x 2 can, emery sand paper sheet 80 grit, emery sand paper sheet 320 grit, acrylic plexiglass sheet cutter scoring knife tool with 10 blades, acrylic sheet pasting glue 20 gm cyanoacrylate adhesive, chlorophome liquid pure 100ml x 2 bottle, m s flat 50mm x 10mm thick kg equi to 5 mtr, hack saw blade size 12 x 1 2 x 0 025 hi speed steel 18 tpi, cotton polishing wheel cloth buffing pad grinding tools size 200 mm, safety shoes, ms round bar 50 mm, aluminum round bar 50 mm, cleaning brush 100 mm, cotton waste, lubricating oil 1 tin 5 liter, file card, grinding wheel carbide, ms round bar 40 mm, aluminium round bar 40 mm, fabric cotton printed, fabric cotton plain, polyester fabric, polyester fabric printed, astar fabric, canvas thin, canvas thick sticky, brown paper, hand needle no 9, hand needle no 7, machine needle db1 no 14 juki machine, machine needle db 1 no 16 juki machine, dressmakers pins, jewelry making instrument sets, bobbins full shuttle, colour thread, hand needle darner no 12, elastic 38mm 1 elastic single thread 2, color pencil stadler, coloring brush 00 01 2 coloring brush flat 4, tailor s chalk, water color set poster color set, stadler pencil color, zip 18, machine needle no 16 half shuttle, thimble, suiting material pant, butter crepe, canvas for embroidery, satin fabric, astar, butter crepe, crepe plain, canvas thick canvas thin brown paper, hand needle no 7 hand needle no 9, bobbins full shuttle bobbin case full shuttle, machine needle db 1 no 14 juki machine, machine needle db 1 no 16 juki machine, color thread, elastic 12 mm elastic 25 mm brass hooks brass hook, elastic 5 mm, tailor s chalk, machine needle no 14 half shuttle, dressmakers pin, suiting material pant, machine oil, gear oil 75 w 80 brake fluid dot 3 4 5 1 oil filter 16510 65l 10 l 034, radiator coolant green, butane gas can 220 ml, desulfon battery life extender additives 300 ml, grinding and lapping compound 450 gms power steering fluid 450ml
Agency / Dept :
ministry of skill development and entrepreneurship MSDE
Due Date :
Sep 15, 2026 (3 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17075415
Location : khamanon , punjab
Source : GEM Tenders
LIVE TENDER
tender for conference table 32 seater , conference chair , chemistry lab table , library almirah steel glass front cabinet , lecture stand , notice board , honor board, procurement of different furniture items, conference table 32 seater providing, supplying and placing in position conference table. table shall be u shape with depth of each modular unit being 600 mm and total length of 10300 mm with tolerance plus 5mm to minus 5 mm. the work surface shall be made of 25mm thick prelaminated twin board of e1 p2 grade in approved shade conforming to is 12823 1990 and shall be edge banded with matching 2mm thick pvc lipping. plastic abs access flaps shall be provided on the work surface for easy access to wires and cables. the under structure shall be made of 18mm thick prelaminated twin board of e1 p2 grade in approved shade conforming to is 12823 1990 and edge banded with matching 2mm thick pvc lipping. aluminium alloy 63400 wp profiles shall be used for connecting the panels and the product shall have knock down construction. the modesty panel shall be made of 18mm thick pre laminated twin board of e1 p2 grade in approved shade conforming to is 12823 1990 and edge banded with matching 2mm thick pvc lipping. a powder coated accent metal strip shall be provided below the work surface for enhanced aesthetics, manufactured from 0.8mm thick crca steel conforming to is 513 and finished with epoxy polyester powder coating having a dry film thickness of 40 to 60 microns. the wire management system shall consist of an array of panels made from 0.8mm thick crca mild steel conforming to is 513 and finished with epoxy polyester powder coating of 40 to 60 microns dft for routing of wires and cables. provision shall be provided below the worktop for mounting an anchor roma 6 module plate. a cut out on the worktop fitted with a two piece injection moulded plastic polymer component shall be provided to facilitate routing of audio and video cables onto the work surface and connection of device chargers to the power socket mounted below the worktop. the product should have following certifications, cii greenpro,ul greenguard,ul,griha,scs indoor advantage gold,bis is 17633 2022, providing, supplying and placing in position revolving chair. the seat shall be injection moulded in glass filled polypropylene compound and upholstered with fabric upholstery covers and moulded polyurethane foam. the back shall be injection moulded in glass filled polypropylene compound and upholstered with mesh fabric. the seat size shall be 500 mm width x 480 mm depth and the back size shall be 530 mm w x 390 mm h with tolerance plus 5mm to minus 5mm. the high resilience hr polyurethane seat foam shall be moulded with density 45 plus minus 2 kg per metre cube and hardness 16 plus minus 2 kgf as per is 7888 for 25 percent compression. the powder coated welded tubular understructure shall be made from diametre 25.4 plus minus 0.3 mm x 2.0 plus minus 0.16 mm and dia19.0 plus minus 0.3 mm x 1.2 plus minus 0.096 mm m.s. erw tubes with powder coating thickness of 50 plus minus 10 microns. the arm rests shall be made of glass filled polypropylene compound and assembled over the tubular frame. the chair shall be provided with a 360 degree revolving base plate mechanism with height adjustment feature. pneumatic seat height adjustment shall have a stroke of 120 plus minus 3 mm. the pedestal assembly shall be fabricated from 2.0 pus minus 0.2 mm thick hr sheet conforming to is 1079 hr, powder coated with dft 40 to 60 microns, and fitted with an injection moulded black polypropylene hub cap and five twin wheel castors. the pedestal shall have a pitch centre diameter of 600 plus minus 5 mm 700 plus minus 10 mm with castors. the twin wheel castors shall be injection moulded in black polyamide. the overall dimensions of the chair shall be 700 mm wx 700 mm d x 855 to 975 mm h with seat height adjustable from 430 mm to 550 mm. the product should have following certifications, ul greenguard,scs indoor advantage gol, as per atc, providing, supplying and placing in position glass door storage unit of overall size 916 mm w x 486 mm d x 1981 mm h, with tolerance plus minus 5mm. it should have shelf thickness of 0.7 mm, back thickness of 0.8mm, door thickness of 0.8mm high yield strength and all other components shall have a thickness of 0.9mm. these components shall be made of crca d grade high yield strength as per is 513. the glass door storwel shall have a brass handle and a 2 way locking mechanism with shooting bolt. it should have a height wise adjustable shelf mounting which shall have a uniformly distributed load capacity of max 40 kg. it should also have a m10 screw type leveller with hex plastic base. the finishing shall include epoxy powder coated to the thickness of 50 microns plus minus 10. plenty of colour options and shelving options shall be available. the product should have following certifications scs indoor advantage gold,bis is 17634 2022, product size width 545mm, depth 650mm, height with castor 1020mm with tolerance plus minus 5mm. construction rigid knock down construction. material side panels, top bottom panels, back panel, shelf panels, work surface panel, door and support frame panel are made from 18mm thick pre laminated board of e1 p2 grade and approved shade confirming to is 12823 1990 with 1.3mm pvc edge lipping.2 platforms are provided. provision for the grommet is provided on the top panel, work surface panel and back panel for better wire management. lockable storage space with shelf is provided for storage of essential equipments. base plate assembly dia 20mm ms rod bushes are fabricated by argo shield welding on 8mm thick hr is 2062 plate and then powder coated. lockable castors are mounted onto the base plate assembly for ease of motion, notice board size 6 feetx 4 feet with tolerance plus minus 5mm. made up of soft cork sheet of 12 mm thickness covered with velvet red cloth, supported on the back with laminate of mica sheet. the entire board shall be framed with in a specially extruded aluminum channel color dark brown with nylon corner edges. the board shall be fixed with square plates and slots for mounting in horizontal or vertical directions., standard honour boards roll of honour displays typically measure heigh 1500 mm 5 ft width 900 mm 3 ft thickness 25 to 35 mm. constructed using 6 mm acrylic, polished wood like oak. hardwood timber frames such as solid oak or walnut with an mdf or laminated backing
Agency / Dept :
department of technical education and industrial training
Due Date :
Sep 18, 2026 (6 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17076395
Location : jodiya , gujarat
Source : GEM Tenders
LIVE TENDER
tender for supply installation testing and commissioning of 32 channel network video recorder with 2 sata interfaces and keyboard and mouse. as per atc clause 4.2.1 and 6.1.1. , supply installation testing and commissioning of 8 tb surveillance hard disk drive hdd. as per atc clause 4.2.2 and 6.1.2. , supply installation testing and commissioning of 4 to 6mp ip ir bullet camera 1 by 2.7 inch or larger progressive scan cmos 2560x1440 pixels or higher 6mm lens ir 50m or higher as per atc 4.2.3 and 6.1.3. , supply installation testing and commissioning of 4 to 6mp ip ir bullet camera image sensor 1 by 2.7 inch or larger cmos resolution 2560x1440 or higher motorized varifocal lens max 12mm ir 50m or higher ip67 as per atc 4.2.4 and 6.1.4 , supply installation testing and commissioning of 4 to 6mp ip ir dome camera 1 2.7 inch or larger cmos 2560x1440 or higher fixed 3.6mm lens ir 30m or higher ip67 or higher as per atc clause 4.2.5 and 6.1.5. , supply installation testing and commissioning of 8 port gigabit poe plus switch with 250 m extended poe transmission as per atc clause 4.2.6 and 6.1.6. , supply and installation of cat-6 or cat7 dual pvc coated cable as per atc clause 4.2.7 and 6.1.7. , supply installation testing and commissioning modular extension board with 4 sockets 4 switches and 1p 6a mcb 10m 1.5sqmmx3c copper sheathed flexible cable including casing capping wiring as per atc 4.2.8 and 6.1.8. , supply installation testing and commissioning of 1kva off line ups as per atc clause 4.2.9 and 6.1.9. , supply and installation of 43 inch 4k uhd smart commercial tv 24x7 operation as per atc clause 4.2.10 and 6.1.10. , supply installation testing and commissioning of hdmi cable as per atc clause 4.2.11 and 6.1.11. , supply and installation of 25 mm pvc conduit pipe as per atc clause 4.2.12 and 6.1.12. , supply installation testing and commissioning of 6 u network rack as per atc clause 4.2.13 and 6.1.13. , supply installation testing and commissioning of 12 u network rack as per atc clause 4.2.14 and 6.1.14. , supply of aluminum platform step self supporting ladderladder with minimum height 15 feet as per atc clause 4.2.15 and 6.1.15. , installation commissioning of cctv system with live streaming at gandhidham and secure remote access to hq noida including nvr cameras monitor ups cabling as per atc 4.2.16. , excavation of the cable trenches from security cabin to power house and server room for laying 25mm pvc pipe and cat 6 cable and refilling as per atc clause 4.2.17 , supply of 12m modular extension board with 16a 2 socket switch and 6a 2 socket switch with 30m 2.5sqmm x 3c copper flexible wire as per atc 4.2.18 and 6.1.16. , misc work incl paver removal refitting excavation refilling 25mm pipe network cable laying rcc road crossing in 40mm upvc pipe old cctv removal casing capping as per atc 4.2.19., upgradation of old cctv surveillance system at balachadi vts station under gandhidham directorate, as per atc clause 4.2.1 and 6.1.1., as per atc clause 4.2.2 and 6.1.2., as per atc clause 4.2.3 and 6.1.3., as per atc clause 4.2.4 and 6.1.4., as per atc clause 4.2.5 and 6.1.5., as per atc clause 4.2.6 and 6.1.6., as per atc clause 4.2.7 and 6.1.7., as per atc clause 4.2.8 and 6.1.8., as per atc clause 4.2.9 and 6.1.9., as per atc clause 4.2.10 and 6.1.10., as per atc clause 4.2.11 and 6.1.11., as per atc clause 4.2.12 and 6.1.12., as per atc clause 4.2.13 and 6.1.13., as per atc clause 4.2.14 and 6.1.14., as per atc clause 4.2.15 and 6.1.15., as per atc clause 4.2.16, as per atc clause 4.2.17, as per atc clause 4.2.18 and 6.1.16., as per atc clause 4.2.19
Agency / Dept :
department of lighthouses and lightships DGLL
Due Date :
Sep 24, 2026 (12 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17032983
Location : vadodara , gujarat
Source : GEM Tenders
LIVE TENDER
tender for item no. 10 of enquiry cum offer- 8948051664 , item no. 20 of enquiry cum offer- 9106260044 , item no. 30 of enquiry cum offer- 9108060604 , item no. 40 of enquiry cum offer- 9108140184 , item no. 50 of enquiry cum offer- 9108140234 , item no. 60 of enquiry cum offer- 9108140494 , item no. 70 of enquiry cum offer- 9106260094 , item no. 80 of enquiry cum offer- 9340350604, 9030m26f30, labels,yellow,thread,90mmx55mm, bottle,sampling,with cap,350ml, cock,pinch,hoffmans,ms/ni-plated, container,sample,al,2lit, aluminum sample can 5l capacity, container,sample,al,1litre, bottle,white glass,700ml f/oil sampling, cap,bakelite,iic-171,p.f.black
Agency / Dept :
indian oil corporation limited IOCL
Due Date :
Sep 14, 2026 (2 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 16975937
Location : cachar , assam
Source : GEM Tenders
LIVE TENDER
tender for provision for distribution of building material for construction of community hall cement 50 kg bag , stone aggregate , coarse sand , bricks , steel rod , ms steel pipe various size , pre painted steel sheet 0.50mm thick 4000mm long , roofing ridge , roofing screw 50mm long , wooden scantling , ceiling board 4ft x 4ft , wooden beading 40 x 12mm , nails assorted size , wooden paneled door 40 mm thick with paneled and door frame size 100 x 75mm with shutter including handle hinges tower bolts and painting etc complete , wooden paneled window 35mm thick with glass paneled and door frame size 100 x 75mm with shutter including handle hinges tower bolts and painting etc complete , distemper white , primer , painting brush 4 , 1 point 5 sq mm frls pvc insulated copper conductor single core cable , 5 or 6 amps modular switch , 15 or 16 amps modular switch , 3 pin 5 or 6 amps modular socket outlet , 6 pin 15 or 16 amps modular socket outlet , 3 module pvc box alongwith modular base and cover plate , 8 module pvc box alongwith modular base and cover plate , ceiling rose , pvc batten angle holder , led tube light fittings 20 watt , led bulb 9 watt , ceiling fan 1200mm , mcb db 6 way double door sp , 16 amps rating 240 or 415 volts c curve mcb , 40a rating double pole 240 v mcb , gi earth plate 600 mm x 600 mm x 6mm thick including accessories , cashing capping , 10 sq mm pvc sheathed aluminum conductor twin core cable, provision for distribution of building material for construction of community hall, cement 50 kg bag, stone aggregate, coarse sand, bricks, steel rod, ms steel pipe various size, pre painted steel sheet 0.50mm thick 4000mm long, roofing ridge, roofing screw 50mm long, wooden scantling, ceiling board 4ft x 4ft, wooden beading 40 x 12mm, nails assorted size, wooden paneled door 40 mm thick with paneled and door frame size 100 x 75mm with shutter including handle hinges tower bolts and painting etc complete, wooden paneled window 35mm thick with glass paneled and door frame size 100 x 75mm with shutter including handle hinges tower bolts and painting etc complete, distemper white, primer, painting brush 4, 1 point 5 sq mm frls pvc insulated copper conductor single core cable, 5 or 6 amps modular switch, 15 or 16 amps modular switch, 3 pin 5 or 6 amps modular socket outlet, 6 pin 15 or 16 amps modular socket outlet, 3 module pvc box alongwith modular base and cover plate, 8 module pvc box alongwith modular base and cover plate, ceiling rose, pvc batten angle holder, led tube light fittings 20 watt, led bulb 9 watt, ceiling fan 1200mm, mcb db 6 way double door sp, 16 amps rating 240 or 415 volts c curve mcb, 40a rating double pole 240 v mcb, gi earth plate 600 mm x 600 mm x 6mm thick including accessories, cashing capping, 10 sq mm pvc sheathed aluminum conductor twin core cable
Agency / Dept :
assam rifles
Due Date :
Sep 15, 2026 (3 days left)
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17191057
Location : lucknow , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for supply installation testing and commissioning of 250kva capacity continuous loading outdoor copper wound transformer , provisioning steel tubular pole , erection of steel tubular , brick work with common burnt clay , pdg 15 mm cement plaster , supplying and installaton m.s. cable trays , earthing with g.i. earth plate , providing and fixing g.i. pipe , providing and fixing g.i. strip , supplying and erection of 11 kv triple pole , supplying and erection of two lengths of channel iron , supplying and erection of 11 kv pin insulator , supplying and erection of 11 kv disc insulator , supplying and erection of lightning arrestor , pdg and fixing abc cable , pdg and fixing aluminium ht cables , pdg and fixing shrinkable ht cable , supply of following aluminium conductor armoured cable , sply gland and aluminium lugs , laying of one number xlpe power cable , in the existing masonry , on surface , on cable tray , pdg and fixing fencing , supply fixing fire extinguisher , pdg 6mtr length b class gi pipe pole , erection of metallic pole, supply installation testing and commissioning of one number 250 kva outdoor transformer, supply installation testing and commissioning of 250 kva capacity bee 5 star rated as per bis amended, 11/0.433 kv step down, 3 phase, 50 hz, onan copper wound transformer electrolytic grade 99.9 percentage pure copper, core made of first crgo core grade moh or better, suitable for out door applications with offload tap changer on hv side with manual operation complete with all accessories and safety provisions as per relevant is code including first filling of filtered dehydrated oil, i/c supplying and grouting of suitable m.s. channel with all accessories and transformer shall be confirming to is 2026 part 1 to part 5, is 1180 and as per cpwd specifications complete in all respects etc as required at site. inside of tank shall be painted with varnish or liquid resistant paint. for external surfaces one coat of thermo setting powder paint or one coat of epoxy primer followed by two coats of polyurethane base paint shall be used. is 1180 part 3 shall be referred to for paint thickness for normal to medium corrosive atmosphere. fitting and accessories the following fittings shall be provided, a. two earthing terminals with the earthing symbol, b. oil level gauge indicating oil level at minimum, 30 degree c and maximum operating temperature, c. air release device for non sealed type transformers, d. rating and terminal marking plates, e. silica gel breather, f. drain cum sampling valve 3 by 4 inch nominal size thread, is 554 preferably steel with plug for three phase transformers, g. thermometer pocket with cap, applicable for special repair no h to s in atc, provisioning of 9 mtr height swaged type steel tubular pole confirming is 2713, duly pained suitable for 11kv supply complete with ms base plate etc as required, erection of steel tubular or rail pole strut in cement concrete 1 retio 3 retio 6, 1 cement 3 coarse sand 6 graded stone aggregate 40 mm nominal size foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required., brick work with common burnt clay modular bricks of class designation 7 point 5 in foundation and plinth in, a. cement mortar 1 ratio 4, 1 cement 4 coarse sand., pdg 15 mm cement plaster on the rough side of single or half brick wall of mix a. 1 ratio 4 , 1 cement 4 fine sand, supplying and installaton 300 mm width x 50 mm depth x 1 point 6 mm thickness of perforated painted with powder coating m.s. cable trays with perforation not more than 17point5 percetage, in convenient sections, joined with connectors, suspended from the ceiling with two numbers ms/gi suspenders i/c base of suitable size ms/gi angle, bolts and nuts, painting uspenders, fastener etc as required., earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required., providing and fixing 25 mm x 5 mm g.i. strip in 40 mm dia g.i. pipe from earth electrode including connection with g.i. nut, bolt, spring, washer excavation and re filling etc. as required., providing and fixing 25 mm x 5 mm g.i. strip on surface or in recess for connections etc. as required., supplying and erection of 11 kv triple pole suitable capacity gang operated air break switch 6 insulator, 3 pc. set complete with 25 mm dia. 3m long operating pipe, lock and handle etc. as reqd., supplying and erection of two lengths of channel iron 75 mm x 40 mm x 6 mm 7.14 kg per metre double pole cross arm for three wire 11kv over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm x 6 mm m.s. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc as per drawing and painting with primer and finish paint as required., supplying and erection of 11 kv pin insulator complete with large steel head g.i. pin, nuts, washers etc. as required., supplying and erection of 11 kv disc insulator for 11 kv over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required., supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 kv overhead lines with rated voltage 9 kv rms with a nominal discharge current rating of 5 ka and complete with galvanised clamping arrangement, g.i. bolts, nuts, washers etc. as required., pdg/ fixing abc cable of 11 kv grade with fresh aerial bunched power cable abc cable of 11 kv grade of size 3 core x 35 sq. mm. aluminum conductor cross linked polyethylene insulated xlpe individual core screened a/w load bearing messenger conductor 25 sq mm , confirming to iec 60502 part 1 complete with laying as per site requirement isi., pdg/ fixing 3core 95sq.mm 11kv grade aluminium ht cables, stranded compacted circular aluminium conductor, conductor screen with extruded semi conducting compound, xlpe insulated, insulation screening with extruded semi conducting compound in combination with copper tape, cores laid up, innersheath of pvc, galvanised steel flat strip armoured, and overall pvc sheathed cable conforming to is 7098 part 2 2011 with upto date amendments., pdg and fixing 11kv rating heat shrinkable ht cable termination kit suitable of 3core 95 sq.mm ht cable complete with lugs etc as required m/s raychem / ss make, supply of following size of pvc insulated pvc sheathed 1.1 kv grade aluminium conductor unarmoured/ armoured cable confirming to relevant is specification etc complete as reqd. make bsnl approved make. a. 3.5 x 120sqmm armoured, supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed/xlpe aluminium conductor cable of 1 point 1 kv grade as required, a. 3 point 5 x 120 sq mm., laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of size bove 95 sq. mm and upto 185 sq. mm in following manners. a. in the existing rcc/ hume/ metal pipe, b. in the existing masonry open duct, c. on surface, d. on cable tray, pdg and fixing fencing all around transfomer made out of suitable size ms angle iron, ms flat iron, min 3mm dia wire mesh/ jali with provision of lockable gate with in fencing complete as reqd., s/fixing 4.5kg co2 type fire extinguisher with 1.5mtr hose and horn complete as required. isi marked, pdg 6mtr length b class 50mm dia gi pipe pole complete with all accessoroies including s/f of socket, suitable size base plate at bottom etc i/c cutting, threading complete as required., erection of metallic pole of following length in cement concrete 1 ratio 3 ratio 6, 1 cement 3 coarse sand 6 graded stone aggregate 40 mm nominal size foundation including excavation and refilling etc. as required. a. above 4 point 5 meter and upto 6 point 5 meter
Agency / Dept :
bharat sanchar nigam limited BSNL
Due Date :
Sep 30, 2026 (18 days left)
Tender Value :
19.59L
View Documents
T18 Ref No : 17147600
Location : port blair , andaman and nicobar islands
Source : GEM Tenders
LIVE TENDER
tender for 12 inch white sugarcane round plate , 11 inch with 5 compartment white sugarcane plate , 8 inch white sugarcane round plate , white sugarcane bowl standard , 150ml disposable tea cup , 200ml ripple tea cup , 300ml ripple juice cup , 300ml disposable juice cup , wooden spoon , disposable plastic gloves , disposable head cap , napkin 100 pcs per pack , disposable fork 6 to 7 inch , food container 250 to 500ml , aluminum foil , food cling wrapping 1 point 5 kg, procurement of disposable items, 13 inch white sugarcane round plate, 12 inch with 5 compartment white sugarcane plate, 9 inch white sugarcane round plate, white sugarcane bowl standard, 150ml disposable tea cup, 200ml ripple tea cup, 300ml ripple juice cup, 300ml disposable juice cup, wooden spoon, disposable plastic gloves, disposable head cap, napkin 100 pcs per pack, disposable fork 6 to 7 inch, food container 250 to 500ml, aluminum foil, food cling wrapping 1 point 5 kg
Agency / Dept :
integrated defence staff IDS
Due Date :
Sep 17, 2026 (5 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17149321
Location : lucknow , uttar pradesh
Source : GEM Tenders
LIVE TENDER
tender for ifa 23 re drugs ethambutol 800mg tab , terbutaline 2 point5mg with bromhexine 8mg with guainphene , allopurinol 300 mg tab , sulfasalazine 1 gm tab , colchicine 0 point5 mg tab , fexofenadine hydrochloride 120mg tab , glucosamine 250mg with chondroitin sulphate 200mg cap , leflunomide 20 mg tab , lefluonmide 10 mg tab , moxifloxacin 400mg tab , atazanavir 300mg with ritonavir 100mg tab , tenofovir 300mg with lamivudine 300mg with efavirenz 6 , clarithromycin 250mg tab , clindamycin 300mg cap , furazolidone 100mg tab , sulphamethoxazole 400mg and trimethoprim 80mg tab , faropenem 300 mg tab , acyclovir 200mg tab , emtricitabine 200mg with tenofovir 300mg tab , lamivudine 150mg tab , nevirapine 200mg tab , zidovudine 300mg with lamivudine 150mg tab , lopinavir 200mg with ritonavir 50mg construction of formulation , nitrofurantoin 100 mg tab , eye drop brimonidine 0 point2percentage with brinzolamide 1p , travoprost 40 ug timolol 5 mg travoprost 4 ug per ml timolol mal , thyroxine sodium 75 mcg tab , rivaroxaban 15mg tab , antacid chewable containing dried aluminum hydroxide ip 250 , eye drop sodium hyaluronate 1mg per ml preservat , soft gelatin cap antioxidant containing aronia extract 20percentag , crizotinib 250 mg cap , tab paroxetin 25 mg cr , clozapine 50 mg tab , ranolazine 500 mg tab , erlotinib 100 mg tab , atorvastatin 40 mg tab , bisoprolol fumarate tab 10 mg , tab carvedilol 6 point25 mg , minoxidil 5 mg tab , tab olmesartan 40 mg , propranolol 10 mg tab , tab trimethazidine mr 35mg , simethicon tab 80 mg , tab calcium acetate 667mg , gliclazide tab 40mg , melatonin 3 mg tab , metformin 850mg tab , prednisolone 10 mg tab , tab voglibose 0 point3 mg , ornidazole 500 mg tab , tenofovir 300 mg with emtricitabine200 mg with efavirenz 600 , tab tenofovir 300 mg with lamivudine 300 mg with dolutegravi , glycopyrronium and inhalation solution 25 mcg 5 respules of 2 , rifampicin 450 mg tab , beclomethasone dipropionate 50mcg and levosalbutamol 50mcg p , pirfenidone 200 mg tab , beclomethasone dipropionate 200 mcg metered dose aerosol con , salmeterol 50 mcg fluticasone 500 mcg dry powder capsule , nintedanib 150 mg soft gelatin capsules , nintedanib 100 mg soft gelatin capsules , ipratropium bromide respirator soln 500mcg per 2ml respule , tiotropium bromide 18mcg and formoterol 12mcg dry powder , budesonide 200mcg dry powder , bromhexine syp 5ml containing 4mg of bromhexine hcl bottle of 100ml , syrup terbutaline sulphate 1 point25mg with bromhexine hcl 4 , dextrose monohydrate for oral use in pack of 100 gm with or witho , dextrose 50percentage 25ml inj , sodium bicarbonate 7 point5percentage amp of 10ml inj , disodium hydrogen citrate syp bott of 100ml , mirabegron 50mg tab , darifenacin 7 point5mg tab , solifenacin 10 mg tab , mirabegron 25 mg tab , cap silodosin 4mg , enteral feed powder protein 85percentage short chain peptides , cilostazole 100mg tab , terazosin 2mg tab , oxybutynin 2 point5mg tab , potassium citrate 1100mg citric acid or magnesium citrate 300 to , tolterodine tartrate 2mg tab , finasteride 5 mg tab , dapagliflozin 5mg tab , cough lozenges , mupirocin 2percentage oint tube of 5gm, ethambutol 800mg tab, terbutaline 2 point5mg with bromhexine 8mg with guainphene, allopurinol 300 mg tab, sulfasalazine 1 gm tab, colchicine 0 point5 mg tab, fexofenadine hydrochloride 120mg tab, glucosamine 250mg with chondroitin sulphate 200mg cap, leflunomide 20 mg tab, lefluonmide 10 mg tab, moxifloxacin 400mg tab, atazanavir 300mg with ritonavir 100mg tab, tenofovir 300mg with lamivudine 300mg with efavirenz 6, clarithromycin 250mg tab, clindamycin 300mg cap, furazolidone 100mg tab, sulphamethoxazole 400mg and trimethoprim 80mg tab, faropenem 300 mg tab, acyclovir 200mg tab, emtricitabine 200mg with tenofovir 300mg tab, lamivudine 150mg tab, nevirapine 200mg tab, zidovudine 300mg with lamivudine 150mg tab, lopinavir 200mg with ritonavir 50mg construction of formulation, nitrofurantoin 100 mg tab, eye drop brimonidine 0 point2percentage with brinzolamide 1p, travoprost 40 ug timolol 5 mg travoprost 4 ug per ml timolol mal, thyroxine sodium 75 mcg tab, rivaroxaban 15mg tab, antacid chewable containing dried aluminum hydroxide ip 250, eye drop sodium hyaluronate 1mg per ml preservat, soft gelatin cap antioxidant containing aronia extract 20percentag, crizotinib 250 mg cap, tab paroxetin 25 mg cr, clozapine 50 mg tab, ranolazine 500 mg tab, erlotinib 100 mg tab, atorvastatin 40 mg tab, bisoprolol fumarate tab 10 mg, tab carvedilol 6 point25 mg, minoxidil 5 mg tab, tab olmesartan 40 mg, propranolol 10 mg tab, tab trimethazidine mr 35mg, simethicon tab 80 mg, tab calcium acetate 667mg, gliclazide tab 40mg, melatonin 3 mg tab, metformin 850mg tab, prednisolone 10 mg tab, tab voglibose 0 point3 mg, ornidazole 500 mg tab, tenofovir 300 mg with emtricitabine200 mg with efavirenz 600, tab tenofovir 300 mg with lamivudine 300 mg with dolutegravi, glycopyrronium and inhalation solution 25 mcg 5 respules of 2, rifampicin 450 mg tab, beclomethasone dipropionate 50mcg and levosalbutamol 50mcg p, pirfenidone 200 mg tab, beclomethasone dipropionate 200 mcg metered dose aerosol con, salmeterol 50 mcg fluticasone 500 mcg dry powder capsule, nintedanib 150 mg soft gelatin capsules, nintedanib 100 mg soft gelatin capsules, ipratropium bromide respirator soln 500mcg per 2ml respule, tiotropium bromide 18mcg and formoterol 12mcg dry powder, budesonide 200mcg dry powder, bromhexine syp 5ml containing 4mg of bromhexine hcl bottle of 100ml, syrup terbutaline sulphate 1 point25mg with bromhexine hcl 4, dextrose monohydrate for oral use in pack of 100 gm with or witho, dextrose 50percentage 25ml inj, sodium bicarbonate 7 point5percentage amp of 10ml inj, disodium hydrogen citrate syp bott of 100ml, mirabegron 50mg tab, darifenacin 7 point5mg tab, solifenacin 10 mg tab, mirabegron 25 mg tab, cap silodosin 4mg, enteral feed powder protein 85percentage short chain peptides, cilostazole 100mg tab, terazosin 2mg tab, oxybutynin 2 point5mg tab, potassium citrate 1100mg citric acid or magnesium citrate 300 to, tolterodine tartrate 2mg tab, finasteride 5 mg tab, dapagliflozin 5mg tab, cough lozenges, mupirocin 2percentage oint tube of 5gm
Agency / Dept :
indian army
Due Date :
Sep 17, 2026 (5 days left)
Tender Value :
1.3Cr
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 17097638
Location : jaisalmer , rajasthan
Source : GEM Tenders
LIVE TENDER
tender for point 5 mtr tube isi marked heavy duty , cp pillar cock 15mm isi marked heavy duty , cp pillar cock 15mm swan neck isi marked heavy duty , cp shower 15 mm 12 inches dia isi marked heavy duty , cp shower 15 mm 6 inches dia isi marked heavy duty , cp shower 15 mm 8 inches dia isi marked heavy duty , cp sink mixture 15mm with regular spout w or m isi marked heavy duty , cp stop cock 15 mm isi marked heavy duty , cp toilet paper holder 6 inches with screw isi marked heavy duty , cp towel rail 25mm x 600mm long isi marked heavy duty , cp towel ring 10 inches x 10 inches isi marked heavy duty , cp wall mixture 15 mm telephonic with l bend provision for over head shower isi marked heavy duty , cp waste coupling 32 mm dia full threaded isi marked heavy duty , cpvc coupling 15mm isi marked heavy duty , cpvc elbow 15mm isi marked heavy duty , cpvc female adopeter brass 15mm isi marked heavy duty , cpvc female adopeter plastice 15mm isi marked heavy duty , cpvc pipe 15mm 10 ft length isi marked heavy duty , cpvc tee 15mm isi marked heavy duty , double action floor spring hydraulically regulated 1 point 25 thick alum alloy sheet fundation boxmain body with stopper sheet isi marked heavy duty , drill bit size 14mm isi marked heavy duty , drill bit size 6mm for drill machine isi marked heavy duty , bit for concrete 12mm drilling machine isi marked heavy duty , bit for concrete 8mm drilling machine isi marked heavy duty , ephoxy sealer resine isi marked heavy duty , fastner 8mm x 150mm long for wash hand basin 2 pcs per set isi marked heavy duty , floor door spring alum 150mm isi marked heavy duty , gi elbow 15 mm isi marked heavy duty , gi elbow 20 mm isi marked heavy duty , gi nipple 15 x 100 mm isi marked heavy duty , gi nipple 15 x 150 mm isi marked heavy duty , gi nipple 15 x 50 mm isi marked heavy duty , gi nipple 20 x 100mm isi marked heavy duty , gi plug 15 mm isi marked heavy duty , gi plug 20 mm isi marked heavy duty , gi reducer 25 x 15mm socket isi marked heavy duty , gi socket 15 mm isi marked heavy duty , gi socket 20 mm isi marked heavy duty , gi socket reducer 20 x 15 mm isi marked heavy duty , gi socket reducer 25 x 20 mm isi marked heavy duty , gi tubing 15mm dia medium grade 20 ft lenth isi marked heavy duty , gi union 15mm isi marked heavy duty , gi union 20mm isi marked heavy duty , gi union 25mm isi marked heavy duty , gi wire mesh 2 ft wide isi marked heavy duty , gi wire mesh 4 ft wide isi marked heavy duty , glass cutter pencil type isi marked heavy duty , gm gate valve 20mm dia isi marked heavy duty , gm gate valve 25mm dia isi marked heavy duty , granding blade 4 inches isi marked heavy duty , grating round ss floor drain trap 5 inches 127mm isi marked heavy duty , grating round ss floor drain trap 5 inches 127mm with waste hole isi marked heavy duty , helical door spring 150 mm isi marked heavy duty , hexa blade 1 inches double side isi marked heavy duty , holding bracket 600mm long for whb 24 inches isi marked heavy duty , hydraulic door closer classic 90 degree universal isi marked heavy duty , hydrolic door closur suitable for both side isi marked heavy duty , internal kit for flush cistern with dual flush pvc isi marked heavy duty , internal kit for flushing cistern single flush pvc isi marked heavy duty , iron cutter blade isi marked heavy duty , knobe decorative isi marked heavy duty , leakage repair water proof tape 5cm x 5m alu foil tape water proof adhesive for water tank, procurement of b and r items, acrylic shelf plain 450 mm long x 150mm wide and 5 point 5 mm thick isi marked heavy duty, acrylic side corner self size 10 inches x 5 point 5mm th isi marked heavy duty, aium bow handle 200mm isi marked heavy duty, aium haples and staples 150mm long isi marked heavy duty, alum tower bolt 200mm isi marked heavy duty, aluminium door stopper double isi marked heavy duty, aluminium door stopper single isi marked heavy duty, aluminium handle 100 mm isi marked heavy duty, aluminium handle 150 mm isi marked heavy duty, aluminium sheet 0 point 56mm width 4 feet isi marked heavy duty, araldite rasine isi marked heavy duty, bath cabinate mirror 450x350mm isi marked heavy duty, bit set of drilling machine isi marked heavy duty, butt hings 200mm isi marked heavy duty, butt hings 50mm isi marked heavy duty, butt hings 75mm isi marked heavy duty, cement bag of 50 kg each isi marked heavy duty, cp angle cock for wash basin 15 mm isi marked heavy duty, cp angle cock 15 mm isi marked heavy duty, cp angle cock 2 way 15mm isi marked heavy duty, cp bib cock 15 mm isi marked heavy duty, cp bib cock 15mm long body isi marked heavy duty, cp bib cock 15mm with wall flange isi marked heavy duty, cp bib cock 2 way 15mm with wall flanged isi marked heavy duty, cp central hole mixture 15 mm for wash hand basin isi marked heavy duty, cp concelled stop cock 15mm isi marked heavy duty, cp coupling 38mm dia for urinal isi marked heavy duty, cp curtain rod 20mm dia isi marked heavy duty, cp curtain rod 25mm dia isi marked heavy duty, cp grating 100mm with hole isi marked heavy duty, cp hand shower 15mm with 1 point 5 mtr tube isi marked heavy duty, cp health faucet 15mm x 8mm dia 1 point 2 mtr tube isi marked heavy duty, cp jet spray 15mm with 1 point 5 mtr tube isi marked heavy duty, cp pillar cock 15mm isi marked heavy duty, cp pillar cock 15mm swan neck isi marked heavy duty, cp shower 15 mm 12 inches dia isi marked heavy duty, cp shower 15 mm 6 inches dia isi marked heavy duty, cp shower 15 mm 8 inches dia isi marked heavy duty, cp sink mixture 15mm with regular spout w or m isi marked heavy duty, cp stop cock 15 mm isi marked heavy duty, cp toilet paper holder 6 inches with screw isi marked heavy duty, cp towel rail 25mm x 600mm long isi marked heavy duty, cp towel ring 10 inches x 10 inches isi marked heavy duty, cp wall mixture 15 mm telephonic with l bend provision for over head shower isi marked heavy duty, cp waste coupling 32 mm dia full threaded isi marked heavy duty, cpvc coupling 15mm isi marked heavy duty, cpvc elbow 15mm isi marked heavy duty, cpvc female adopeter brass 15mm isi marked heavy duty, cpvc female adopeter plastice 15mm isi marked heavy duty, cpvc pipe 15mm 10 ft length isi marked heavy duty, cpvc tee 15mm isi marked heavy duty, double action floor spring hydraulically regulated 1 point 25 thick alum alloy sheet fundation boxmain body with stopper sheet isi marked heavy duty, drill bit size 14mm isi marked heavy duty, drill bit size 6mm for drill machine isi marked heavy duty, bit for concrete 12mm drilling machine isi marked heavy duty, bit for concrete 8mm drilling machine isi marked heavy duty, ephoxy sealer resine isi marked heavy duty, fastner 8mm x 150mm long for wash hand basin 2 pcs per set isi marked heavy duty, floor door spring alum 150mm isi marked heavy duty, gi elbow 15 mm isi marked heavy duty, gi elbow 20 mm isi marked heavy duty, gi nipple 15 x 100 mm isi marked heavy duty, gi nipple 15 x 150 mm isi marked heavy duty, gi nipple 15 x 50 mm isi marked heavy duty, gi nipple 20 x 100mm isi marked heavy duty, gi plug 15 mm isi marked heavy duty, gi plug 20 mm isi marked heavy duty, gi reducer 25 x 15mm socket isi marked heavy duty, gi socket 15 mm isi marked heavy duty, gi socket 20 mm isi marked heavy duty, gi socket reducer 20 x 15 mm isi marked heavy duty, gi socket reducer 25 x 20 mm isi marked heavy duty, gi tubing 15mm dia medium grade 20 ft lenth isi marked heavy duty, gi union 15mm isi marked heavy duty, gi union 20mm isi marked heavy duty, gi union 25mm isi marked heavy duty, gi wire mesh 2 ft wide isi marked heavy duty, gi wire mesh 4 ft wide isi marked heavy duty, glass cutter pencil type isi marked heavy duty, gm gate valve 20mm dia isi marked heavy duty, gm gate valve 25mm dia isi marked heavy duty, granding blade 4 inches isi marked heavy duty, grating round ss floor drain trap 5 inches 127mm isi marked heavy duty, grating round ss floor drain trap 5 inches 127mm with waste hole isi marked heavy duty, helical door spring 150 mm isi marked heavy duty, hexa blade 1 inches double side isi marked heavy duty, holding bracket 600mm long for whb 24 inches isi marked heavy duty, hydraulic door closer classic 90 degree universal isi marked heavy duty, hydrolic door closur suitable for both side isi marked heavy duty, internal kit for flush cistern with dual flush pvc isi marked heavy duty, internal kit for flushing cistern single flush pvc isi marked heavy duty, iron cutter blade isi marked heavy duty, knobe decorative isi marked heavy duty, leakage repair water proof tape 5cm x 5m alu foil tape water proof adhesive for water tank and pipe isi marked heavy duty, safetylock for cupboard isi marked heavy duty, looking mirror 450 x 600 mm aluminum frame or pvc isi marked heavy duty, looking mirror 5mm thick 1200x600mm in wooden frame isi marked heavy duty, machine screw half threaded 6 x 60 isi marked heavy duty, magnetic catcher isi marked heavy duty, ms butt heenges 100 mm isi marked heavy duty, ms handle for window isi marked heavy duty, multi purpose seal 100 gm pkt isi marked heavy duty, nail 1 inches isi marked heavy duty, nail 3 or 4 inches isi marked heavy duty, nail wire 1 inches 1 or 2 inches long isi marked heavy duty, glazing putty isi marked heavy duty, peg set of 06 isi marked heavy duty, piano type hinges ss 20 mm thick and 6ft long isi marked heavy duty, plain glass sheet 3mm thick size of each sheet not exceed 0 point 5 sqm isi marked heavy duty, plyboard 4mm of size 8 feet x 4 feet isi marked heavy duty, plyboard 6mm of size 8 feet x 4 feet isi marked heavy duty, pvc angle cock 15 mm isi marked heavy duty, pvc angle cock 15 mm two way isi marked heavy duty, pvc ball cock 15 mm with ball and rod isi marked heavy duty, pvc ball cock 20 mm with ball and rod isi marked heavy duty, pvc bib cock 15 mm isi marked heavy duty, pvc bib cock 15 mm long body with flanged isi marked heavy duty, pvc flushing cistern 10 ltr cap isi marked heavy duty, pvc health faucet 15mm with tube 1 point 5 mtr and hook isi marked heavy duty, pvc overhead shower round 3 inches isi marked heavy duty, pvc pillar cock 15 mm isi marked heavy duty, pvc pillar cock 15 mm swan neck isi marked heavy duty, pvc sheet white 8 feet x 4 feet x 6mm hisi marked eavy duty, pvc square shower arm of size 225mm isi marked heavy duty, pvc stop cock 15 mm isi marked heavy duty, pvc tank cover lid isi marked heavy duty, pvc toilet seat cover for ewc isi marked heavy duty, pvc urinal waste pipe 45mm dia isi marked heavy duty, pvc waste coupling 32mm dia full threaded isi marked heavy duty, pvc waste pipe 32 mm isi marked heavy duty, self drilling screw full thread 6mm x 25mm length in 100 nos of pkt isi marked heavy duty, self tapping screw 8 x 25mm 250 each pkt isi marked heavy duty, sink with drainage board made of ss 1mm thick for kitchen with plugs overall size 915 x 460mm bowl size 410mm x 330x160mm isi marked heavy duty, sliding bolt hendle 300mm isi marked heavy duty, soap dish holder 6 inches isi marked heavy duty, solvant tube 20ml isi marked heavy duty, ss concealed curtain socket 25mm isi marked heavy duty, ss curtain support set 25mm isi marked heavy duty, ss handle 100mm with machine screw isi marked heavy duty, star type steel screw 32 x 6 g full threaded pkt of 250 pcs isi marked heavy duty, star type steel screw 45 x 6 g full threaded pkt of 250 pcs isi marked heavy duty, star type steel screw 50 x 6 g full threaded pkt of 250 pcs isi marked heavy duty, star type steel screw full thread 20mm pkt of 250 pcs isi marked heavy duty, star type steel screw full thread 8 x 10 mm pkt of 250 pcs isi marked heavy duty, star type steel screw full thread 8 x 19 mm pkt of 250 pcs isi marked heavy duty, star type steel screw full threaded 8 x 13 pkt of 250 pcs isi marked heavy duty, star type steel screw full threaded 8 x 35 pkt of 250 pcs isi marked heavy duty, star type steel screw half thread 8 x 50mm pkt of 250 pcs isi marked heavy duty, steel screw star type 100 mm dia full thread 100 nos in each pkt isi marked heavy duty, tank connection nipple 25mm isi marked heavy duty, tank nippe 20mm isi marked heavy duty, teflon tape 20 to 40mm width 21 to 30m long isi marked heavy duty, tiles 300mm x 300mm isi marked heavy duty, tiles 600mm x 600mm isi marked heavy duty, tiles wall 300mm x 450mm isi marked heavy duty, tower bolt aluminium 100 mm isi marked heavy duty, tower bolt aluminium 150 mm isi marked heavy duty, urinal white pipe 45mm isi marked heavy duty, viterous china wash hand basin size 530 x 425mm isi marked heavy duty, water storage tank 1000 ltr cap d or l isi marked heavy duty, water storage tank 500 ltr cap d or l isi marked heavy duty, white cement isi marked heavy duty, wooden cutter blade isi marked heavy duty
Agency / Dept :
indian army
Due Date :
Sep 14, 2026 (2 days left)
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Aluminum Cap. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Aluminum Cap sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Aluminum Cap Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Aluminum Cap, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Aluminum Cap Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Aluminum Cap Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Aluminum Cap.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Aluminum Cap depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Aluminum Cap Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Aluminum Cap bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Aluminum Cap. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Aluminum Cap, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Aluminum Cap, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Aluminum Cap?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Aluminum Cap tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Aluminum Cap?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Aluminum Cap, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Aluminum Cap is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All