sales@tender18.in| +917069661818
Register Now Free Trail
Register Now Free Trail
Search Tenders
Filters
Reset All
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source
Tender Type

66Latest Aluminium glass partition Tenders List

Latest Aluminium glass partition Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Aluminium glass partition tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Aluminium glass partition tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Aluminium glass partition Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Aluminium glass partition tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Aluminium glass partition Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Aluminium glass partition Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Aluminium glass partition Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Aluminium glass partition tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Aluminium glass partition Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Aluminium glass partition sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Aluminium glass partition tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Aluminium glass partition tenders.

Is EMD mandatory for all Aluminium glass partition tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Aluminium glass partition work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Aluminium glass partition tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Aluminium glass partition Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

T18 Ref No : 16387963
Location : amritsar , punjab
LIVE TENDER
tender for provision of aluminium and glass partitioning in logistics section
Agency / Dept :
central public works department CPWD
Due Date :
Jul 28, 2026 (1 day left)
Tender Value :
250427
View Documents
T18 Ref No : 16225997
Location : kannur , kerala
Source : GEM Tenders
LIVE TENDER
tender for heavy duty racks 1 ton 02 storage levels , heavy duty racks 1 ton 05 storage levels , heavy duty racks 500 kg , metal cabinet , partitions , office shelves , aluminium and glass door , furnitures, as per scope of work para 2 serial 1, as per scope of work para 2 serial 2, as per scope of work para 2 serial 3, as per scope of work para 2 serial 4, as per scope of work para 2 serial 5, as per scope of work para 2 serial 6, as per scope of work para 2 serial 7, as per scope of work para 2 serial 8
Agency / Dept :
indian navy
Due Date :
Aug 03, 2026 (7 days left)
Tender Value :
0
View Documents
T18 Ref No : 16311364
Location : vemula , andhra pradesh
Source : GEM Tenders
LIVE TENDER
tender for earth work in excavation , filling available excavated earth excluding rock , position cement concrete , reinforced cementconcrete , foundations footings bases of columns etc , columns lintels beams plinth beams roofs etc , steel reinforcement , brick work with common fly ash bricks , structural steel work riveted , neat cement , painting with synthetic enamel paint , 15 mm cement plaster , 6mm cement plaster , water proofing material , premium acrylic emulsion paint , random rubble masonry , removal of damaged barbed wire fencing , water proofing treatment , rigid pvc rain water pipes , supplying and stacking , ms stays and clamps of 100 mm dia , drain cleaning including removal of muck , surface dressing of the ground , 12 mm cement plaster , removing white or colour wash , wall painting with acrylic emulsion paint , providing and applying white cement , finishing walls with acrylic smooth exterior paint , providing and applying plaster of paris putty , white washing with lime , providing and mixing water proofing material , demolishing stone rubble masonry , demolishing brick work , providing and injecting approved grout , providing and fixing glass panes 4 point 0 mm thick glass , providing and fixing glass panes 5 point 0 mm thick glass , providing and fixing glazing in aluminium door 4 point 0 mm thickness , providing and fixing glazing in aluminium door 5 point 0 mm thickness , 30 mm thick factory , providing and fixing factory made panel pvc door , providing and fixing aluminium work for doors , for shutters of doors windows , providing and fixing isi marked flush door shutters , providing and fixing brass 100mm , providing and fixing aluminium handles , providing and fixing aluminium sliding door , providing and fixing bright finished , providing and fixing ist quality ceramic glazed , providing and laying ceramic glazed floor , providing and fixing white vitreous china , providing and fixing water closet squatting , providing and fixing wash basin , providing and fixing ms holder , removal cleaning collection and stacking of wet dry muck , loading trasportation and unloading of the dried muck , fencing with angle iron post , providing and fixing gi chain link , removal of honey bee , cleaning of septic tank, ancillary civil maintenace works at tummalapalle plant and tailing pond area of ucil tummalapalle, earth work in excavation by mechanical means hydraulic excavator manual means over areas exceeding 30 cm in depth 1 point 5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth at all lead and lift as directed by engineer in charge in all kinds of soil, filling available excavated earth excluding rock in trenches and other areas as required in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering at all lead and lifts as per directions of engineer in charge, providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering at all levels as perdirections of engineer in charge with 1 isto 3 isto 6 1 cement 3 coarse sand 6 graded stoneaggregate 20 mm nominal size including compacting and curing as per specifications and directions of engineer in charge, providing and laying in position specified grade of reinforced cementconcrete excluding the cost of centering shuttering finishing andreinforcement at all levels as per directions of engineer in charge1 isto1 point 5 isto 3 1 cement 1 point 5 coarse sand 3 graded stoneaggregate 20 mm nominal size including compaction curing etc. complete as per directions of engineer in charge, centering and shuttering including strutting propping etc and removalof form as per directions of engineer in charge at all leads and lifta in foundations footings bases of columns etc a in foundations footings bases of columns etc, centering and shuttering including strutting, propping etc and removalof form as per directions of engineer in charge at all leads and lifta in foundations footings bases of columns etc b in superstructure columns lintels beams plinth beams roofs etc, steel reinforcement including straightening cutting bending placing in position and binding all complete at all leads and lift with thermo mechanically treated bars of grade fe 500d or more, brick work with common fly ash bricks of class of approved quality with designation 7 point 5 in cement mortar 1 isto 6 1 cement 6 coarse sand at all levels and lift as per directions of engineer in charge, structural steel work riveted bolted or welded in built up sections trusses and framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete, neat cement punning, painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade in two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per directions of eic, 15 mm cement plaster with mix 1 isto 6 1 cement 6 fine sand at all lead and lifts with polymer modified cement mortar including curing cost of all materials labour tools and tackles etc complete as per directions of engineer in charge, 6mm cement plaster of mix 1 isto 3 1 cement 3 fine sand, providing and mixing water proofing material in cement per bag of plaster work in proportion recommended by the manufacturers note per bag of 50 kg cement used in the mix, finishing walls with 100 percentage premium acrylic emulsion paint having voc less than 50 gm per litre and uv resistance as per is 15489 2004 alkali and fungal resistance dirt resistance exterior paint of required shade company depot tinted with silicon additive new work two or more coats applied 1 point 43 litre per 10 sqm over and including priming coat of exterior primer applied 0 point 90 litre per 10 sqm, random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1 isto 6 isto 12 1 cement 6 coarse sand 12graded stone aggregate 20 mm nominal size at all lead and lifts with cement mortar 1 isto 6 1 cement 6 coarse sand including cost of all materials, tools and tackles and labour etc complete as per directions of engineer in charge, removal of damaged barbed wire fencing and replacement with new barbed wire weighing 9 point 38 kg per 100m minimum fitted and fixed gi staples, turn buckles etc complete as per directions of engnieer in charge, grading roof for water proofing treatment with cement concrete 1 isto 2 isto 4 1 cement 2 coarse sand 4 graded stone aggregate 20mm nominal size, providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is 13592 type a including jointing with seal ring conforming to is 5382 leaving 10 mm gap for thermal expansion i single socketed pipes 110 mm diameter, supplying and stacking 53 mm to 22 point 4 mm size stone aggregate including cost of materials transportation loading and unloading taxes and royalty charges etc complete as per directions of engineer in charge, providing and fixing ms stays and clamps of 100 mm dia for pipes including necessary screws etc complete as per directions of engineer in charge, drain cleaning including removal of muck sludge solids rubbish etc from drains decant pond and other areas includng cost of all hire charges of machinery labour charges taxes insurance tools and tackles etc. complete as per directions of engineer in charge, surface dressing of the ground including removing vegetation and in equalities not exceeding 15 cm deep and disposal of rubbish lead up to 500m all kinds of soil up to all lead and lift including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, cement plaster with a floating coat of neat cement 12 mm cement plaster finished with a floating coat of neat cement of mix 1isto 4 1 cement 4 fine sand up to all lead and lift including cost of all materials labor tools and tackles taxes royalty charges etc complete as per latest edition of is code specifications and direction of engineer in charge, removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc complete including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, wall painting with acrylic emulsion paint having voc volatile organic compound content less than 50 grams per litre of approved brand and manufacture including applying additional coats wherever required to achieve even shade and colour. two coats including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete including cost of labor tools and tackles taxes etc complete as per direction of engineer inmcharge, finishing walls with acrylic smooth exterior paint of required shade old work one or more coat applied 0 point 90 ltr per 10 sqm including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, white washing with lime to give an even shade two or more coats including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and mixing water proofing material in proportion recommended by the manufacturers including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge note per bag of 50kg cement used in the mix, demolishing stone rubble masonry manually by mechanical means including stacking of serviceable material and disposal of unserviceable material within 3 kilometres lead in cement mortar up to all lead and lift including cost of all labor tools and tackles taxes etc complete as per latest edition of is code specifications and direction of engineer in charge, demolishing brick work manually by mechanical means including stacking of serviceable material and disposal of unserviceable material within 3 kilometres lead in cement mortar including cost of all labor tools and tackles taxes etc complete as per latest edition of is code specifications and direction of engineer in charge, providing and injecting approved grout in proportion recommended by the manufacturer into cracks honey comb area of concrete masonry by suitable gun pump at required pressure including cutting of nipples after curing etc stirrer mixed sbr polymer of approved make modified cement slurry made with shrinkage compensating cement in concrete rcc work including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing glass panes with putty and glazing clips in steel doors windows clerestory windows all complete with 4 point 0 mm thick glass panes including cost of labor tools and tackles taxes etc complete as per the architectural drawings including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing glass panes with putty and glazing clips in steel doors windows clerestory windows all complete with 5 point 0 mm thick glass panes including cost of labor tools and tackles taxes etc complete as per the architectural drawings and the directions of engineer in charge, providing and fixing glazing in aluminium door window ventilator shutters and partitions etc with epdm rubber neoprene gasket etc with float glass panes of 4 point 0 mm thickness weight not less than 10 kg per sqm including cost of labor tools and tackles taxes etc complete as per the architectural drawings and the directions of engineer in charge, providing and fixing glazing in aluminium door window ventilator shutters and partitions etc with epdm rubber neoprene gasket etc with float glass panes of 5 point 0 mm thickness weight not less than 10 kg per sqm including cost of labor tools and tackles taxes etc complete as per the architectural drawings and the directions of engineer in charge, 30 mm thick factory made polyvinyl chloride pvc door shutter made of styles and rails of a upvc hollow section of size 60x30 mm and wall thickness 2 mm pluse or minus 0 point 2 mm with inbuilt decorative moulding edging on one side the styles and rails mitred and joint at the corners by means of ms galvanised plastic brackets of size 75x220 mm having wall thickness 1 point 0 mm and stainless steel screws the styles of the shutter reinforced by inserting galvanised ms tube of size 25x20 mm and 1 mmpluse or minus 0 point 1 mm wall thickness the lock rail made up of h section a upvc hollow section of size 100x30 mm and 2 mm pluse or minus 0 point 2 mm wall thickness fixed to the shutter styles by means of plastic galvanised ms u cleats the shutter frame filled with a upvc multi chambered single panel of size not less than 620 mm having over all thickness of 20 mm and 1 mm pluse or minus 0 point 1 mm wall thickness the panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised ms rod and fastened with nuts and washers complete as per manufacturers specification including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing factory made panel pvc door shutter consisting of frame made out of ms tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top and bottom rails. ms frame shall have a coat of steel primers of approved make and manufacture ms frame covered with 5 mm thick heat moulded pvc c channel of size 30 mm thickness 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick 95 mm wide pvc sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide pvc sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. top bottom and lock rails shall be provided both side of the panel 10 mm 5 mm x 2 thick 20 mm wide cross pvc sheet be provided as gap insert for top rail and bottom rail paneling of 5 mm thick both side pvc sheet to be fitted in the ms frame welded sealed to the styles and rails with 7 mm 5 mm 2 mm thick x 15 mm wide pvc sheet beading on inner side and joined together with solvent cement adhesive an additional 5 mm thick pvc strip of 20 mm width is to be stuck on the interior side of the c channel using pvc solvent adhesive etc complete as per direction of engineer in charge manufacturers specification and drawing. 30 mm thick plain pvc door shutters including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing aluminium work for doors windows ventilators and partitions with extruded built up standard tubular sections appropriate z sections and other sections of approved make conforming to is 733 and is 1285 fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions ie at top bottom and sides with required epdm rubber neoprene gasket etc aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle aluminium snap beading for glazing paneling cp brass stainless steel screws all complete as per architectural drawings glazing paneling and dash fasteners to be paid for separately anodised aluminium anodised transparent or dyed to requied shade according to is 1868 minimum anodic coating of grade ac 15 including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, for shutters of doors windows ventilators including providing and fixing hinges pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber neoprene gasket required fittings anodised aluminium anodised transparent or dyed to required shade according to is 1868 minimum anodic coating of grade ac 15 including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing isi marked flush door shutters conforming to is 2202 part i decorative type core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 30 mm thick including isi marked stainless steel butt hinges with necessary screws including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing brass 100mm mortise latch and lock with 6 levers without pair of handles best make of approved quality for aluminium doors including necessary cutting and making good etc including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing aluminium handles isi marked anodised anodic coating not less than grade ac 10 as per is 1868 transparent or dyed to required colour or shade, with necessary screws etc including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing aluminium sliding door bolts isi marked anodised anodic coating not less than grade ac 10 as per is 1868 transparent or dyed to required colour or shade with nuts and screws etc complete of size 300x16 mm including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing ist quality ceramic glazed wall tiles conforming to is 15622 thickness to be specified by the manufacturer of approved make in all colours shades except burgundy bottle green black of any size as approved by engineer in charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1 isto 3 1 cement 3 coarse sand and jointing with grey cement slurry 3 point 3kg per sqm including pointing in white cement mixed with pigment of matching shade complete including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and laying ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer of 1st quality conforming to is 15622 of approved make in all colours shades except white ivory grey fume red brown laid on 20 mm thick bed of cement mortar1 isto 4 1 cement 4 coarse sand jointing with grey cement slurry 3 point 3kg per sqm including pointing the joints with white cement and matching pigments etc including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing white vitreous china pedestal type water closet european type wc pan with seat and lid 10 litre low level white pvc flushing cistern including flush pipe with manually controlled device handle lever conforming to is 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required wc pan with isi marked at all leads and lift including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing water closet squatting pan indian type wc pan with 100 mm sand cast iron p or s trap 10 litre low level white pvc flushing cistern including flush pipe with manually controlled device handle lever conforming to is 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required with white vitreous china orissa pattern wc pan of size580x440 mm with integral type foot rests including cost of all materials labour tools and tackles etc complete as per specifications and directions of engineer in charge, providing and fixing wash basin with ci brackets 15 mm cp brass pillar taps 32 mm cp brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require white vitreous china wash basin size 630x450 mm with 15 mm cp brass pillar taps of approved brand as per instructions including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing ms holder bat clamps of approved design to ci or sci rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1 isto 2 isto 4 mix 1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size and cost of cutting holes and making good the walls etc 100 mm diameter including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, removal cleaning collection and stacking of wet dry muck sludge from drains floors and others areas within a lead of 500m by manual means including cost of manpower tools and tackles etc up to all lead and lift including cost of all labor tools and tackles taxes etc complete as per direction of engineer in charge, loading trasportation and unloading of the dried muck obtained from item no 47 above upto a lead of 03 km including cost of transportation manpower tools and tackles etc complete as per directions of engineer in charge tare weight and gross weight of vehicle for each trip of disposal to be taken at ucils wigh bridge for payment 1 cum equal to1 point 6mt shall be taken for calculation purpose care should be taken to avoid any spillage on road up to all lead and lift including cost of all labor tools and tackles taxes etc complete as per direction of engineer in charge, fencing with angle iron post placed at required distance embedded in cement concrete blocks every 15th post last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires of barbed wire weighing 9 point 38 kg per 100 m minimum between the two posts fitted and fixed with gi staples turn buckles etc complete cost of posts struts earth work and concrete work to be paid for separately payment to be made per metre cost of total length of barbed wire used with gi barbed wire including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing gi chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts bolts and washers as required complete as per the direction of engineer in charge made of gi wire of dia 4 mm including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, removal of honey bee hives including cost of labor tools and tackles etc complete as per direction of engineer incharge, cleaning of septic tank of various of sludge including loading removal of spillage if any and unloading at a safe place of disposal and cleaning with water of spetic tank including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge
Agency / Dept :
uranium corporation of india limited UCIL
Due Date :
Aug 08, 2026 (12 days left)
Tender Value :
4486347.85
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16327574
Location : bhopal , madhya pradesh
Source : GEM Tenders
LIVE TENDER
tender for hand gloves , cutting wheel 14 inch , welding holder , air curtain 4 ft , dustproof aluminium partition with glass 12 ft x 12ft , cordless angle grinder, hand gloves, cutting wheel 14 inch, welding holder, air curtain 4 ft, dustproof aluminium partition with glass 12 ft x 12ft, cordless angle grinder
Agency / Dept :
indian army
Due Date :
Jul 30, 2026 (3 days left)
Tender Value :
128400
View Documents
T18 Ref No : 16357817
Location : port blair , andaman and nicobar islands
Source : GEM Tenders
LIVE TENDER
corrigendum tender for almirah large steel 1 by 2 hanging 1 by 2 shelving , mattress for king size bed , side board , chair plastic ornate , charpoy ip with hard top , shoe rack wooden double door , table center two tier , table writing , chair dining long back and cushion , table center with glass top , table dining 4 pers , sofa set 5 seater with cushion , sofa set 4 seater , table dressing ladies including stool , peg table with glass top , teapoy , locker bed side steel , rack adjustable 6 tier steel , hat stand with mirror , chair writing , table dining round shape with 4 chair t wood , chair d man , receptacle pvc , chair computer , bin linen multipurpose , chair visitors , hot case large , chair cushioned with arms , table office wooden , table office officer , bed hard , almirah small steel with shelves , book case , chair verandah , chair easy , chair dining , chair school with hand board , durries 24 feet x 15 , rack shoe steel , rack single 2745 x 760 x 1905 mm , sofa set 5 seater , peg table , tv trolly , trestle store room steel , table dining six pers , table dining eight pers, replacement of ber furniture for the qe jun 2025 and qe sep 2025 under ge haddo sri vijaya puram, all as shown on drawing. overall size shall 920mm long 485mm wide and 1985mm high. the base shall be 100mm high. the base shall be made of two numbers mild steel sheet channels shape with ends covered and welded to bottom of almirah. mild steel sheet for channel shall be 1mm thick. the base channel shall be welded at 50mm from each end of 920mm length. top comma sides comma back comma bottom and front of almirah shall be 1mm thick mild steel sheet. two shelves shall be provided at 350mm and 700mm from bottom of almirah. ahan ging rod 60mm from top shall be provided which shall be of 20mm dia steel chromium plated conduit pipe of wall thickness 1 point 25mm. two sockets shall be provided at the end of hanging rod. front shutters shall have two leaves. a steel chromium plated handle 100mm long shall provided to shutters. a three way locking device shall be provided to front shutters. each leaf of front shutter shall be hinged with three nubers butt hinges 75mm long and shutters shall be side hung. all joints and welding comma fixing shall be done with standard workmanship. all hung. all joints and welding comma fixing shall be done with standard workmanship. the almirah shall be finished dry powder coated in double shade different colour after properly smoothening the surface or as approved by ge both internaly and externaly. rest all as specified oblique shown in drawing and directed by enginer in charge., the overall of size of mattress 78 inch x 72 inch x 8 inch. the matress shall be made of natural latex and cool foam reinforced by each other by press mechanism.the tapestry used in the matress shall be of best quality. the pilllow shall be of size 600mmx300mm filled with white reckon fibre and covered with best quality cotton fabric in desired shape and bedsheet size of 9 feet x 8 feet long best quality cotton colour approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., oveall size shall be 1220mm long comma 455mm wide and 760mm high. body of the side board comma shelves comma drawers comma shutters shall be made of 18 mm thick exterior grade mdf board both side laminated in light wallnut shade or as approved by ge. back of side board shall be 12 mm thick plywood. sides comma back and bottom of drawers shall be of 18 mm thick mdf board bothside laminated. top drawer shall be given 5 comportment in equidistant space in front portion and one comportment in remaining portion. 4mm thick teak wood edging shall be provided to all edges of mdf board. ss handle and ss knobs as approved by ge shall be provided for shutter and drawers. drawers shall be supported with telescopic channel for smooth functioning. 75 mm high skirting shall be provided by 19 mm thick teak wood as shown in drawing. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer-in-charge., as per trade pattern and directed by enginer in charge, long and short rails of bed shall be 65 x 25 mm 16 gauge rectangle ms tube.stifners shall be 25 mm 16 gauge square ms pipe. legs shall be 32 mm 16 gauge square ms pipe and welded properly at joints to make the charpoy. 25 x 60 x 6 mm cleats be welded with short rails inner side to support the plywood. 12 mm thick ply wood bwr type unpolished shall be provided to the top of charpoy screwed with cleat and stiffners by nut and washers. all steel members shall be finshed with two coats of synthetic enamel paint to obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper in black colour. rest all as specified oblique shown in drawing and directed by enginer in charge., as per trade pattern and directed by enginer in charge., overall size shall be 900mm long comma 450mm wide and 400mm high. all wood shall be of teak wood. top of the table shall be provided with 12 mm thick glass of approved shade. legs shall be made out of 60mmx30mm in section teak wood and 356 mm high. bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs comma widthwise at 100mm above the bottom of legs. the bottom tier shall be fixed on the top of bottom side rails with 50mm long screwss. the bottom tier shall be 12 mm thick glass of approved shade. 25mm dia hard rubber oblique pvc rings shall be fixed to the bottom of all legs fixed with 30mm long screws. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge, overall size shall be 450mm wide at bottom legs level and 455mm deep and 1200 mm high. all timber work shall be first class seasoned teak wood free from knots oblique defects. front legs shall be of size 25mmx50mm in section and 450mm high and rear legs shall be of section 65mmx50mm made to shape as shown on drg. the front and rear legs at seat level shall be joined by 40 mm x 20 mm in section side rails provided at 450 mm from bottom legs. the top of side rails shall be at 450 mm from bottom of legs. two side stiffeners of 25 mm x 40 mm in section shall beprovided joining front and rear legs. the bottom side stiffeners shall be 100 mmabove the bottom of legs. a middle stiffener of 25 mm x 40 mm in section joining the side stiffeners in middle shall be provided as shown on drg. for seat cushion comma a frame shall be made with 75 mm x 20 mm in section front and rear wooden horizontal rails comma joined by 40 mm 20 mm in section wooden side rails. 70 mm x 10 mm batten shall be provided in the middle. 45 mm x 10 mm batten shall be provided with three equal gaps. 50 mm thick comma 32 density foam shall be provided to the chair which shall be covered with leatherised rexine of best quality as approved by ge. the back rest the shape of legs shall be as shown on drg. rails of 45mmx25mm in section shall be 40mm apart from legs and joined by 10mm dia teak wood in vertical and 12mm dia teak wood in horizontal. back shall have vertical battens 20mmx25mm in section. 50mm thick synthetic foam of 32 density covered with leatheised rexene made to shape as shown on drg shall be fixed over 10mm thick plywood commercial. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., overall size shall be 1200mm long comma 600mm wide and 400mm high. legs shall be of 40mm dia anodized brass legs comma four in number in one piece. the legs shall be joined in short and long sides with two number 25mm dia brass pipes of wall thickness 2mm. the top pipe shall be fixed 150mm from top and the lower pipe shall be at 100 from bottom of top pipe the brass frame shall be 900mm long and 450mm wide. vaacuum rubber shall be provided at top of legs comma which shall be closed with brass sheet 1 point 6mm thick. the bottom of legs shall be covered with brass sheet of 1 point 6mm thick sheet. the bottom of legs shall have pvc shoes. the top shall be provided with 12 mm thick glass of approved shade with corners rounded as shown drawing comma the edges of top of table shall be rounded off. rest all as specified oblique shown in drawing and directed by enginer in charge., all wooden part shall be first class seasoned teak wood free from knots and defects. hard rubber oblique nylon buffers shall be fixed at the bottom of legs with brass screws, top shall be 18 mm thick exterior grade mdf board both side laminated in light wallnut shade or as approved by ge comma duly fixed with 4mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh 8 nos of l shape corner of flat iron 5mm thick 4 inch x 4 inch between legs and rail to be fixed with screw. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by engineer in charge., the set consist of one long piece of three seater and two small pieces of single seater. all timber work shall be first class seasoned teak wood free from knots oblique defects. cushion for seat and back shall be of 100mm thick 40 density duly covered with fabric oblique tapestry cloth not less than rs 500 by mtr composition of 65 percentage polyester and 35 percentage cotton or as approved by ge. all the wooden joints shall be fixed with bamboo pins and nails shall not be used. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge., the set consist of one long piece of two seater and two small pieces of single seater. all timber work shall be first class seasoned teak wood free from knots oblique defects. cushion for seat and back shall be of 100mm thick 40 density duly covered with fabric oblique tapestry cloth not less than rs 500 by mtr composition of 65 percentage polyester and 35 percentage cotton or as approved by ge. all the wooden joints shall be fixed with bamboo pins and nails shall not be used. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by engineer in charge., the body of table and stool shall be 18m thick exterior grade pre laminated mdf board one side laminated in light wallnut shade or as approved by ge comma duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh. drawers shall be supported with telescopic ball bearing channel for smooth functioning. shutter shallbe fixed with ss piano hinges and magnetic catcher. mirror frame shall be first class teak wood free from knots and defects. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge, overall size shall be 450mm long comma 300mm wide and 380mm high. legs shall be of first class teak wood of section 30mmx50mm. the legs shall be 362mm high. 5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position. two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs. two bottom rails of size 20mmx40mm shall be fixed between the legs. a centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg. vaacuum rubber shall be provided at top of legs. the top shall be 12mm thick plate tinted glass white colour with corners rounded as shown drawing comma the edges of top of table shall be rounded off. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge, the leg shall be 60mm x 30mm in section and 497 mm high and shall be of teak wood 5mm x 5mm in section groove shall be provided at the visible portion of the top of legs. top rail of first class teak wood of 20mm x 50mm in section and 510mm long shall be provided between the legs bottom rail of teak wood of 20mm x 50mm in section and 420mm long shall be provided between legs comma widthwise at 100mm above the bottom of legs. a centre rail of size 20mm x 50mm shal also be provided lengthwise at centre in between the side bottom rails irrespective of what is shown on drg 25mm thick and 25mm dia hard rubber pvc rings shall be fixed to the bottom of all legs fixed with 30 mm long screws. top of the table shall be of 18 mm thick exterior grade mdf board both side laminated in light wallnut shade or as approved by ge comma with 4mm thick teak wood beading all round the edges of top. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified oblique shown in drawing and directed by enginer in charge., 1mm thick ms sheet shall be used to manufacture locker except legs. two legs shall be provided to almirah as shown on drawing and shall be of 1 point 25 mm thick ms sheet. cromium plated stainless steel godrej type handle 100mm long shall be fixed on shutters comma locker shall be fitted with isi marked 75mm 6 lever lock with three way locking system. front shutters shall have two leaves of equal size. locker shall be finished with shade of ta gray colour or as approved ge both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with spray gun after properly smoothening the surface with sand paper. rest all as specified shown in drawing and directed by enginer in charge, over all size shall be 915mm long comma 305 mm wide and 1905mm high. frame shall be 40x40x5mm slotted angle iron fixed with nut bolts irrespective of shown in drawing.shelf shall be 1mm thick crca sheet with bottom support of 15x15x3mm angle iron. all steel surface shall be finished with shade of ta gray colour or as approved by ge both internaly and externaly two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper. rest all as per drawing and directed by engineer in charge., overall size shall be 1330 mm long comma 710mm high. the inner frame shall be of 50mmx20mm teak wood battens six in nos . the back and front of frame shall be covered with 6mm thick commercial ply. the edges of the frame shall be covered with 6mmx35mm teak wood edging fixed alround the frame with headless nails and adhesive. six brass pegs 120mm long shall be fixed over the wooden membrane with brass screws as shown in drg. 5mm thick looking mirror shall be provided as shown on drg with beading alround . mild steel key plate shall be provided at both top corners of the hat stand. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces . all steel surfaces shall be painted with two coats of enamel paint over a coat of primer. rest all as per drawing and directed by engineer in charge., the frame of the chair shall be of 16 gauge 25mm dia ms tubular frame powder coated. back shall be designed with contoured lumber support for extra comfort. 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with pvc lippling alround shall be provided at seat and back. arm rest shall be of black integral skin poly urethane with shore a hardness and reinforced with ms insert. it shall be scratch and wheather resistant. both hand rest section shall have inner and outer dia of 210mm and 230mm respectively and have slope towards front. rest all as specified shown in drawing and directed by engineer in charge., table dining round shape 1200mm comma high 760mm shall be first class seasoned teak wood free from knots and defects. hard rubber oblique nylon buffers shall be fixed at the bottom of 04 legs of 30x40mm with brass screws comma top shall be 18 mm thick teak wood with12mm thick glass top. chair dining long back and cushion overall size shall be 450mm wide at bottom legs level and 455mm deep and 1200 mm high. all timber work shall be first class seasoned teak wood free from knots oblique defects. front legs shall be of size 25mmx50mm in section and 450mm high and rear legs shall be of section 65mmx50mm made to shape. the front and rear legs at seat level shall be joined by 40 mm x 20 mm in section side rails provided at 450 mm from bottom legs. the top of side rails shall be at 450 mm from bottom of legs. two side stiffeners of 25 mm x 40 mm in section shall beprovided joining front and rear legs. the bottom side stiffeners shall be 100 mm above the bottom of legs. a middle stiffener of 25 mm x 40 mm in section joining the side stiffeners in middle shall be provided as shown on drg. for seat cushion comma a frame shall be made with 75 mm x 20 mm in section front and rear wooden horizontal rails comma joined by 40 mm 20 mm in section wooden side rails. 70mmx 10mm batten shall be provided in the middle. 45 mm x 10 mm batten shall be provided with three equal gaps. 50 mm thick comma 32 density foam shall be provided to the chair which shall be covered with leatherised rexine tapestry cloth not less than rs 500 by mtr of best quality as approved by ge. rails of 45mmx25mm in section shall be 40mm apart from legs and joined by 10mm dia teak wood in vertical and 12mm dia teak wood in horizontal. back shall have vertical battens 20mmx25mm in section., overall size shall be 470mm wide comma 445mm deep and 1040mm high. tall timber work shall be first class seasoned teak wood free from knots oblique defects. front legs shall be 50x50mm at top and 40x40mm at bottom. rear legs shall be 95x50mm. the seat of the chair shall be woven in godrej pattern with 2mm wide 0 point 25mm thick best quality cane. all diamensions comma shape and size shall be followed as per drg. all joints comma fixing shallbe done in accordance with standard specifications. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge, as per trade pattern and directed by enginer in charge, body of the bin linen multipurpose comma shelves comma drawers comma shutters shall be made of 19mm thick exterior grade mdf board both side laminated. shade as approved by ge back shall be 12mm thick plywood sides back and bottom of drawers shall be of 12mm thick mdf board bothside laminated shade as approved by ge. 4mm thick teak wood edgig shall be provided to all edges of mdf board. ss handle and ss knobs as approved by ge shall be approved for shutter and drawers. drawers shall be supported with telescopic channel for smooth functioning 75mm high skirting shall be provided by 19mm thick teak wood as shown in drawing. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., as per trade pattern and directed by enginer-in-charge., top shall be made of teak wood with size of legs as 45mmx45mm at top and 30mmx30mm side stiffners of size 40x19mm. the top portion shall have be provided with teak wood frame made of 74mmx19mm batterns frame as shown in drg. the bottom of top frame shall be provided with asbestos sheet plain. the two shleeves fitted inside the hot case shall be made of 4mm dia wire mess welded to 12x3mm flat iron frame as shown. the inner sides/shutters including top and bottom of hot case shall be fitted with aluminium sheet lining allround. the shutters shall be fixed with aluminium hinges and each shutter shall be provided with dimentions comma shape and size shall be followed as per drg. all joints fixing shall be done in accordance with standard specification. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., as per trade patern and directed by enginer in charge., as per trade patern and directed by enginer in charge, as per trade patern and directed by enginer-in-charge, all steel member shall be 18 gauge ms pipe. the frame of head board and foot board shall be of 38mm ms square pipe. 18mm ms square pipe shall be provided in the inner of head or foot board frame as shown in drg. 18mm thick both side prelaminated mdf board of walnut shade with 4mm thick teakwood beading shall be screwed to ms strip arc welded with 18mm thick square pipe with standard workmanship both in head/foot board. one stiffener of size 25mmx25mm shall be welded between the two legs of head board over 150mm from the ground level. the top of bed hard shall be of 12mm thick bwr grade plywood of approved make fixed over the four equidistant stiffener of size 25mmx25mm sq ms pipe in line with bottom of 25x65mm long rail section. pvc shoes shall be provided to legs of bed. all steel members shall be finshed with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer with sray gun after properly smoothening the surface with sand paper in black colour. rest all as per drawing., overall size shall be 1270mm high comma 765mm wide and 440mm deep. 1mm thick ms sheet shall be used to manufacture almirah except legs. two legs shall be provided to almirah as shown on drawing and shall be of 1 comma 25 mm thick ms sheet. cromium plated stainless steel godrej type handle100mm long shall be fixed on shutters comma almirah shall be fitted with isi marked 75mm 6 lever lock with three way locking system. front shutters shall have two leaves of equal size. the almirah shall be finished dry powder coated in double shade different colour after properly smoothening the surface or as approved by ge both internaly and externaly. rest all as specified shown in drawing and directed by enginer in charge., overall size shall be 1230mm long. 300mm wide and 760mm high. all wood shall be of first class teak wood . the legs shall be made to shape out of 50mmx100mm teak wood. the legs shall be 100mm high. the two long rails of 50mmx50mm in section and 1230mm long shall be provided for support of body of book case. the two long rails shall be joined with 25mmx50mm stiffeners at 150mm from each end joining the long rails. 19mm thick pre laminated mdf board shall be provided at bottom comma top comma sides shelves and vertical partitions. the back shall be of 6mm thick ply wood. the top comma shelves comma bottom and vertical partitions shall have 1 comma 5mm plastic laminated sheet fixed over the mdf board. the vertical partition shall have plastic laminated sheet on both sides. the shelves shall have plastic laminated sheet on top only. the top and bottom of book case shall have plastic laminated sheet on top only. the sides shall have plastic laminated sheet on both sides. the fornt edges of sides comma shelves comma vertical partition and top shall be covered with 3mmmm thick teak wood edging. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., the overall size of the chair shall not be less than 460mm wide 600mm deep and 355 mm high to seat from ground level and over all height 760mm. the frame of the chair verendah shall be made up of 20mm dia conduit piupe of wall thickness 1 point 6mm. seat and back of the chair shall be woven with virgin plastic cane 4mm wide and 0 point 6mm thick half round in true godrej pattern weighing not less than 6 gms in ten running meters. pvc hard rubber shoe shall be provided to each leg of chair verendah. the chair shall be powder coated in white colour after preparation of surface or as approved by ge. rest all as specified shown in drawing and directed by engineer in charge., overall size shall be 510mm long comma 575mm wide and 720mm high. all wood shall be seasoned first class teak wood free from knots and defects. hard nylon buffers shall be fixed at the bottom of legs with brass screws. canning of chairs by true godrej pattern with plastic cane 2mm to 2.5mm wide comma white colour coma quality as approved by ge all as specified and as shown on drgs. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by engineer in charge., the overall size shall be 440 mm wide x 430mm deep and 460mm high from front and 890mm high from back. all teak used shall be 1st class hard teak wood. pvc hard rubber ring of dia 25mm shall be provided to bottom of each leg with 20mm long screw. canning shall be done in true godrej pattern with virgin plastic cane of 2mm wide 0 point 6mm thick half round gola type weighing not less than 6 gms in ten running meters with border woven with 4mm thick plastic cane. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., overall size shall be 535mm long comma 470mm wide and 890mm high. well seasoned teak wood throughout in frame work shall be used for framework comma caning shall be done without any joint in the cane. the cane shall be of 2mm wide comma 0 point 4mm thick half round gola type of shah or equivalent brand. the sides of the chair shall be canned with 4mm thick cane. hard rubber rings of 25mm dia and 25mm high shall be screwed to the bottom of all legs. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified shown in drawing and directed by enginer in charge., overall size shall be of 585 mm wx300 mm dx738 mm h. 25mm dia 16 gauge ms tube shall be provided for steel frame. synthetic enamel paint colour black shall be applied two coats over a coat of primer. 1st class teak wood shall be used for hand board. one piece pvc seat and back shall be provided. all diamensions comma shape and size shall be followed as per drg. all joints comma fixing shall be done in accordance with standard specifications. rest all as per drawing and directed by engineer in charge., overall size shall be 24 feet x 15 feet long. it shall be made up of heavy cotton fringes losely woven and knitted in rectangular pieces fringed at the ends having cotton backing .the nominal thickness of the durrie shall not be less than 5mm. as per sample approved by ge, overall size shall be 700mm long comma 300mm wide and 880mm high. main frame shall be 25mm dia 18 guage ms pipe. shelf frame shall be 19mm dia 18 guage ms pipe and covered by 3mm dia ms rods three in length wise and nine in width wise. all steel and iron surface shall be finished with two coats of synthetic enamel paint upto obtaining glossy finishing over a coat of redoxide primer after preparation of surfaces. rest all as per drawing and directed by engineer in charge., over all size of the rack shall be 2745mm length comma 760mm depth and 1905mm high. storage solutions mild steel heavy duty storage racks with 4 shelves . as per the trade pattern and directed by engineer in charge., the set consist of one long piece of three seater and two small pieces of single seater. as per trade pattern and directed by engineer in charge., overall size shall be 450mm long comma 300mm wide and 380mm high. all wood shall seasoned first class teak wood free from knots and defects. hard nylon buffers shall be fixed at the bottom of legs with brass screws. h type leg stiffeners shall be provided for better support. top shall be 18 mm thick exterior grade mdf board one side laminated in light wallnut shade or as approved by ge comma duly covered with 4 mm thick teak wood beading in matching shade with synthetic adhesive fevicol sh. all wooden surfaces shall be polished with two coats of melamine polish with spray machine in light walnut shade after preparation of surfaces or as approved by ge. rest all as specified/ shown in drawing and directed by enginer in charge., overall size shall be 650mm long x 500mm wide and 750mm high. the sides comma back comma shelf and front openable shutters shall be of 18mm thick prelaminated mdf board.the front shutters shall be of 5 point 5 mm thick glass shutter with magnetic catcher.brass handle and door catchers shall also be provided to the tv trolley as described on drg. the pull out drawers shall be provided with two telescopic channel.the top of the trolley shall be of 18mm thick prelaminated mdf board of size 750mmx600mm.50mm dia swivel type castors 4 in numbers shall be provided at base. 4mm thick teak wood beading shall be fixed allroung the edges of the top. rest all as specified shown in drawing and directed by enginer in charge, overall size shall be 2440mm long comma 600mm wide and 300mm high. two long angle iron 40mmx40mmx6mm of mild steel 1980mm long shall be provided 520mm apart at bottom connected with 50mm x 3mm iron bracing comma four in numbers comma and equally spaced with 50mm x 50mmx6mm iron. all steel and iron work surfaces shall be painted with two coats of enamel paint over a coat of primer with spray machine after preparation of steel surfaces on exposed to view when placed in position. rest all as specified shown in drawing and directed by enginer in charge, table dining 6 pers. overall size shall be 1500mm long comma 900mm wide and 750mm high. all wood shall be of first class teak wood. the top shall be of prelaminated mdf board of 18 by 19mm thick with 4mm thick teak wood beading alround the edges of the top fixed with headless nails and adhesive on long sides only., table dining 8 pers. overall size shall be 1800mm long comma 900mm wide and 750mm high. all wood shall be of first class teak wood. the top shall be of prelaminated mdf board of 18 by 19mm thick with 4mm thick teak wood beading alround the edges of the top fixed with headless nails and adhesive on long sides only.
Agency / Dept :
indian army
Due Date :
Jul 27, 2026 (Expire Today)
Tender Value :
6495500
View Documents
T18 Ref No : 15222522
Location : koraput , odisha
tender for aluminium glass partition/ window replacement and marbonite flooring at defferent buildings inside alumina plant, nalco, damanjodi
Agency / Dept :
national aluminium company limited NALCO
Due Date :
May 20, 2026
Tender Value :
0
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16281717
Location : amritsar , punjab
tender for provision of aluminium and glass partitioning in logistics section
Agency / Dept :
central public works department CPWD
Due Date :
Jul 21, 2026
Tender Value :
250427
View Documents
T18 Ref No : 16226835
Location : rangareddy , telangana
Source : GEM Tenders
tender for semi aluminium and glass partition with sliding door
Agency / Dept :
indian air force IAF
Due Date :
Jul 23, 2026
Tender Value :
0
View Documents
T18 Ref No : 15767795
Location : visakhapatnam , andhra pradesh
Source : GEM Tenders
tender for height adjustment mechanism cushioned seating and sturdy base , providing fabricating supplying and fixing aluminium panel with aluminium frame including mesh fittings and installation , providing supplying and fixing wall mounted backside mirrors including cutting polishing edge finishing and fixing with suitable supports or adhesives , providing and fixing laminate finish on existing wooden cupboards including surface preparation adhesive application pasting of laminate sheets edge finishing and polishing , providing fabricating supplying and installing customized toughened glass partition of size 12 feet x 10 feet including frosted printed stickering necessary fittings and fixing arrangements , providing and applying wall puty and painting to internal wall surfaces of measuring 13 feet x 17.5 feet including surface preparation putty application primer and final coats , providing and fixing suspended false ceiling system using 12mm thick gypsum boards fixed over gi metal framework for an area of 650 sqft including supply installation jointing and finishing , providing fabricating supplying and installing wooden cupboard of size 3 feet x 2 feet x 6 feet including carcass shutters internal shelves hardware and finishing , providing fabricating supplying and installing wooden table of size 3 feet x 3 feet x 5 feet including structure tabletop supports and finishing , providing fabricating supplying and installing glass door showcase unit of size 5 feet x 2 feet x 7.5 feet including structure glass shutters internal shelves hardware and finishing , providing fabricating supplying and installing wooden storage box of size 2 feet x 3 feet x 3.5 feet including structure top opening doors internal storage space and finishing , providing fabricating supplying and installing aluminium entrance door with full height partition system of size 12 feet x 10 feet including aluminium framing glass panels door shutter fittings , providing fabricating supplying and installing l shape cushioned seating system of overall size 8 feet x 6 feet including structural framework cushioning upholstery and fixing for room 2 , dismantling shifting and refixing of exisiting door shelter canopy or shade including careful removal transportation within site reinstallation and proper fixing , providing fabricating supplying and installing internal door partition inside existing store including framing partition panels door shutter fittings and finishing , providing fabricating supplying and installing outer shelter structure for store area of size 30 feet x 24 feet including structural framework roofing sheets supports and fixing arrangements , providing fabricating supplying and installing aluminium partition system for canteen outer area covering a total of 900 sqft including aluminium framing infill panels glass or board fittings , providing supplying works for area preparation improvement and finishing including surface corrections flooring wall treatments, refurbishment of traiing cum motivation bay for undertrainees near arihant block at ins satavahana, providing and fixing suspended false ceiling system using 12mm thick gypsum boards fixed over gi metal framework for an area of 520 sqft including supply installation jointing and finishing, providing and fixing decorative wall wallpaper of including surface preparation adhesive application installation and finishing complete as per specifications, providing supplying installing testing and commissioning of tr two cap humidity control unit including temperature controller complete with all accessories refrigerant piping electrical connections, providing and applying wall putty and painting to all internal wall surfaces including surface preparation putty application primer and final paint coats complete as per specifications, providing supplying installing and fixing lighting fixtures for false ceiling including wiring cutouts and fittings complete as per specifications, providing laying dressing and securing of electrical cables including fixing on walls or ceilings or within conduits or trays complete with all accessories fastening and finishing, providing fabricating supplying and installing l shape cushioned seating system of overall size 8 feet x 6 feet includign structural framework cushioning upholstery and fixing, providing fabricating supplying and installing wall mounted wooden storage system including cabinets or shelves with shutters complete with all materials hardware and fixing arrangements, providing and supplying high rise adjustable seating arrangement with height adjustment mechanism cushioned seating and sturdy base, providing fabricating supplying and fixing aluminium panel with aluminium frame including mesh fittings and installation, providing supplying and fixing wall mounted backside mirrors including cutting polishing edge finishing and fixing with suitable supports or adhesives, providing and fixing laminate finish on existing wooden cupboards including surface preparation adhesive application pasting of laminate sheets edge finishing and polishing, providing fabricating supplying and installing customized toughened glass partition of size 12 feet x 10 feet including frosted printed stickering necessary fittings and fixing arrangements, providing and applying wall puty and painting to internal wall surfaces of measuring 13 feet x 17.5 feet including surface preparation putty application primer and final coats, providing and fixing suspended false ceiling system using 12mm thick gypsum boards fixed over gi metal framework for an area of 650 sqft including supply installation jointing and finishing, providing fabricating supplying and installing wooden cupboard of size 3 feet x 2 feet x 6 feet including carcass shutters internal shelves hardware and finishing, providing fabricating supplying and installing wooden table of size 3 feet x 3 feet x 5 feet including structure tabletop supports and finishing, providing fabricating supplying and installing glass door showcase unit of size 5 feet x 2 feet x 7.5 feet including structure glass shutters internal shelves hardware and finishing, providing fabricating supplying and installing wooden storage box of size 2 feet x 3 feet x 3.5 feet including structure top opening doors internal storage space and finishing, providing fabricating supplying and installing aluminium entrance door with full height partition system of size 12 feet x 10 feet including aluminium framing glass panels door shutter fittings and fixing, providing fabricating supplying and installing l shape cushioned seating system of overall size 8 feet x 6 feet including structural framework cushioning upholstery and fixing for room 2, dismantling shifting and refixing of exisiting door shelter canopy or shade including careful removal transportation within site reinstallation and proper fixing, providing fabricating supplying and installing internal door partition inside existing store including framing partition panels door shutter fittings and finishing, providing fabricating supplying and installing outer shelter structure for store area of size 30 feet x 24 feet including structural framework roofing sheets supports and fixing arrangements, providing fabricating supplying and installing aluminium partition system for canteen outer area covering a total of 900 sqft including aluminium framing infill panels glass or board fittings, providing supplying works for area preparation improvement and finishing including surface corrections flooring wall treatments partitions and allied activities to make the space functional safe, providing supplying installing testing and commissioning of tr two cap humidity control unit including temperature controller complete with all accessories refrigerant piping electrical connections, providing fabricating supplying and installing aluminium glass partition locker unit of size 7feet x 5 feet x 2 feet including aluminium framework glass panels internal storgae compartments shutetrs
Agency / Dept :
indian navy
Due Date :
Jun 25, 2026
Tender Value :
0
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 15955919
Location : midnapore , west bengal
corrigendum tender for making aluminium partition wall one third glass and two third acp at dr nandini ghosh laboratory of microbiology dept in the campus of vidyasagar university
Agency / Dept :
vidyasagar university
Due Date :
Jun 29, 2026
Tender Value :
274918
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to Aluminium Glass Partition. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the Aluminium Glass Partition sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the Aluminium Glass Partition Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in Aluminium Glass Partition, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our Aluminium Glass Partition Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For Aluminium Glass Partition Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for Aluminium Glass Partition.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for Aluminium Glass Partition depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For Aluminium Glass Partition Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for Aluminium Glass Partition bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of Aluminium Glass Partition. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for Aluminium Glass Partition, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to Aluminium Glass Partition, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in Aluminium Glass Partition?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based Aluminium Glass Partition tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for Aluminium Glass Partition?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for Aluminium Glass Partition, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for Aluminium Glass Partition is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All