sales@tender18.in| +917069661818
Register Now Free Trial
Register Now Free Trial
Search Tenders
Filters
Reset All
Tender Status
T18 Ref No
All States
All Cities
All Agencies
Tender ID
Due Date
Tender Value
Tender Source (GeM, Cppp & Others)
Tender Type

33Latest All electric bus Tenders List

Latest All electric bus Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right All electric bus tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win All electric bus tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time All electric bus Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize All electric bus tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of All electric bus Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in All electric bus Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for All electric bus Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All All electric bus tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of All electric bus Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the All electric bus sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily All electric bus tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new All electric bus tenders.

Is EMD mandatory for all All electric bus tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a All electric bus work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private All electric bus tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for All electric bus Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

Due Date
T18 Ref No : 17062645
Location : mysore , karnataka
LIVE TENDER
auction or scrap of lot no - lot name - scrap of condemned unserviceable bg405 cabins product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of condemned /damaged/used/ unserviceable bg405 cabins available on as is where is condition. (approx weight of 01cabin = 680kgs) (note:buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - scrap of c i boring ms turning boring mixed with mud product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of c.i boring/m.s. turning & boring(mixed with mud) available on as is where is condition. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - ms melting scrap product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps m.s.melting scrap of various thickness,consisti ng of off-cut plates recieved from production shops on as is where is condition . note: 1)an amount of rs.3,00,000/- (rs.three lakhs only) is required to be paid by any participating bidder/buyer as pre-bid emd amount to m/s mstc,bangalore . 2)buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap. | lot no - lot name - scrap of plastic fibre items product type - miscellaneous category - plastic - 0.0 pcb group - plastic scrap scrap of plastic/fibre items consisting of various items like damaged crates,platic bins,roof top ventilators,plastic chairs,water tanks, empty oil cans and various other kinds of plastic or fibre items available on as is where is basis. (note :buyers should have authorisation from pollution control board as recyclers or re- processors for plastic wastes/scrap.) | lot no - lot name - scrap of rubber items product type - miscellaneous category - rubber - 0.0 pcb group - rubber scrap scrap of rubber items consisting of condemned/un- serviceable/reject ed rubber/plastic/ho ses/pvc/nylon tubes along with other miscellanious items consisting of lengthy individual pressure hoses, hose assys with or without end fittings ,o-rings, bushes,pvc nylon tubes ,belts, flaps ,rubber mounts, gromets,rubber pads ,etc., available on as is where is condition. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of rubber wastes /scrap.) | lot no - lot name - scrap of stainless steel canteen vessels product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of condemned/unse rviceable stainless steel canteen vessels consisting of various items like steel tables with ms fittings,steel tumblers,steel plates ,steel glasses,coffee cups/serving pots /boxes/tea pots/ water jugs/serving handles etc available on as is where is basis. the lot may contain some of the aluminium vessels/items also to be considered as integral part of the scrap lot while lifting. (note: 1)separating ms fittings from the steel tables are not allowed and to be lifted fully as integral part of the lot. 2)buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous / ms/ ss / iron & steel | lot no - lot name - scrap of condemned engines product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of condemned ,rejected,used,d amaged engines of various equipment models available with or without their associated accessories on as is where is condition. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - scrap of condemned rejected bg405 transmissions product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of condemned & rejected bg405 transmissions available on as is where is condition.(approx weight of 01transmission= 420kgs) (note:buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - scrap of condemned bg405 hood assy product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of condemned ,rejected,used,d amaged bg405 hood assy available on as is where is condition. (approx weight of 01hood assy = 290kgs) note: 1)the gas cutting permission in advance,will be given by beml to the successful buyer to facilitate loading.however, gas cutting to be done as minimum as possible just sufficient to load the materials on the trucks/lorry. 2)buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - scrap of condemned welding coil spools product type - miscellaneous category - plastic - 0.0 pcb group - plastic scrap scrap of condemned,dam ged,rejected,used welding coil spools (with or without damages) available on as is where is condition. (note :buyers should have authorisation from pollution control board as recyclers or re- processors for plastic wastes/scrap.) | lot no - lot name - scarp of used and rejected oil soaked leather hand gloves product type - petroleum products category - used/ waste oil - 0.0 pcb group - used spent/burnt oil/used lube oil/used engine oil scarp of used and rejected oil soaked leather hand gloves and aprons of various sizes available on as is where is basis .(note:buyers should have authorisation from pollution control board as recyclers or re- processors for handling oil soaked wastes/scrap.) | lot no - lot name - scrap of used battery operated platform truck- 3 wheeler product type - transport vehicles category - others - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of used,condemned ,damaged,reject ed and unserviceable battery operated platform truck-3 wheeler available with or without associated accessories for sale on as is where is condition. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - scrap of electrical items product type - electrical items category - others - 0.0 pcb group - e- waste-rule 2022 scrap of electrical items consisting of condemned ,used,rejected ,damaged wire harnesses along with other items like switches,cieling fans, small electrical coils,small armature fittings along with alluminium casings, electrical boards,small exhaust fan assemblies, rear tail /top lamp assemblies,tube light fitings/frames,allu minium dome lights, solar panels,coils,roto ry switches, damaged telephone handles,burnt bulbs,pcb boards,ac/dc circuit boards with capacitors,heavy electrical conductors,bus bars,condmened crt tubes with associated parts,plugs,socke ts,fuses,control knobs and | lot no - lot name - scrap of condemned protective covers guards product type - miscellaneous category - plastic - 0.0 pcb group - plastic scrap scrap of condemned,used ,damaged & rejected protective covers/guards(us ed to cover wheel rims or tyres) usually made up of fibre re- inforced plastic available on as is where is condition. (note :buyers should have authorisation from pollution control board as recyclers or re- processors for plastic wastes/scrap.) | lot no - lot name - scrap of condemned cutting tools product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of condemned,used ,damaged & rejected,worn- out,unserviceable cutting tools/hand tools consisting of items like drill bits,tapping bits, milling cutters etc. the lot is also inclusive of other tools like hand held pneumatic drilling machines,electric al grinding machines,torque wrenches,extensi on bars,measuring tapes,and all other hand tools of various sizses and shapes etc., available on as is where is condition. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - electronic waste product type - electronics items category - compters/peripherals - 0.0 pcb group - e- waste-rule 2022 electronic waste: condemned,dam aged,rejected, unusable it equipments such as pcs, dmp printers(dot matrix printers),line printers,deskjet printers,motherbo ards,smps,mouse ,keyboards,crt monitors,old broken printers,scrap cd writers,scrapped laser jet or dot matrix printers & tft or crt monitors along with or without power cables ,scrapped photocopying machines ,scrap cds with plastic/pvc containers.,used & discraded telephones with malfunctioning handles, etc., note: 1)bidders should possess valid kspcb license/authorisa tion as reprocessor towards disposal of e-waste . | lot no - lot name - scrap of used steel wire ropes and chain links product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of used/condemned /damaged/reject ed/unserviceable steel wire ropes and chain links with/without connecting hooks, magnets and rounds available on as is where is condition. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - ms scrap product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps ms scrap of condemned /damaged/reject ed /unserviceable/ old hydraulic cylinders of various types and sizes belonging to differrent equipment models available with or without their accessories on as is where is condition. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of ferrous/ ms / iron & steel scrap.) | lot no - lot name - scrap of condemned rejected miscellanious items product type - metal category - mixed metal scraps - 0.0 pcb group - copper & brass scrap scrap of condemned / damaged/used or rejected miscellanious items of various metal & metal alloys consisting of items like used/discarded/r ejected ms taps,end fiittings,nozzles,g as regulators made of brass,covers ,unions,elbows,g uards,holders,min iature or small gear items etc., made of ms iron or copper or bronze or gun metal associated with other miscellanious items available on as is where is basis. (note:buyers should have authorisation from pollution control board as recyclers or re- processors of metal alloys scrap like copper/brass/gun metal etc.,) | lot no - lot name - scrap of condemned tungsten carbide inserts product type - metal category - iron and steel - 0.0 pcb group - ferrous and non ferrous metals scraps scrap of condemned,dam aged,rejected ,broken tun | lot no - lot name - scrap of used oil product type - petroleum products category - used/ waste oil - 0.0 pcb group - used spent/burnt oil/used lube oil/used engine oil scrap of used oil (with/without water mix) contained in plastic & ms barrells on as is where is basis condition . (note: 1)the bid price per litre shall be inclusive of container price,irrespective of plastic/ms barrell.the transferring of scrap oil from one barrell to another by the buyer is permitted(if required) with his own arrangements to make the partially filled barrells full while lifting.buyers to take care of spillage while loading. 2)buyers should have authorisation from pollution control board as recyclers or re- processors of used oil or spent oil scrap.) | lot no - lot name - scrap of used empty plastic oil barrels product type - container category - barrel/drum - 0.0 pcb group - empty barrels/containers/l iners contaminated with hazardous chemicals/wastes scrap of used empty plastic oil barrels of 205/210lts capacity .(barrels in damaged conditions also to be taken along with this lot) available on as is where is condition.note: 1) bidders should possess valid kspcb license/authorisa tion as reprocessor towards disposal of empty barrels /hazardous wastes. 2)bidders should use kspcb authorised vehicles only for transportation of the hazardous materials following kspcb norms/rules in order to facilitate beml for raising e-menifests in the kspcb website )
Agency / Dept :
mstc limited metal scrap trade corporation limited
Due Date :
Sep 15, 2026 (3 days left)
Tender Value :
Refer Document
View Documents
T18 Ref No : 17113015
Location : pulwama , jammu & kashmir
LIVE TENDER
tender for e-nit no. 26 of 2026-27 dated 03-09-2026 electric gadgets lis koil, electric gadgets at lis koil stage 2nd (providing and fitting of hv distribution panel consisting of 6.6kv vcbs and comprising of incomers-02 nos, 01 no. bus coupler, 04 nos o/g feeder panel, 02 nos trafo/auxiliary feeders with all allied works
Agency / Dept :
irrigation and flood control department I & FC
Due Date :
Sep 14, 2026 (2 days left)
Tender Value :
45.5L
View Documents
T18 Ref No : 17204717
Location : chinsurah magra , west bengal
Source : GEM Tenders
LIVE TENDER
corrigendum tender for grease gun as per is 7794 (q4) , arbor press hand operated 2 ton capacity , auto level with all accessories , automatic ice cube machine , bus ac tutorial model , capacitance level indicator , car ac tutorial model , car jet washer with standard accessories , connecting rod alignment fixture , current meter , cut section of 4 or 6 cylinder diesel engine with moving condition to show momentum of internal parts , dgps latest version , diesel engine crdi 4 stroke dismantling and assembling with swivelling stand , diesel engine running condition stationary type , diesel engine six cylinder in running condition , different type of engine bearing model , display cabinet , drill machine pillar type motorized , drilling machine pillar type , dumpy level , echo sounder , electric assisted power steering , electrical test bench , electrode drying oven , ev charger , fuel injection test bench for calibration of fuel pump , functional experiment model of different type of sensors , geometrical models wooden plastic , hand gps latest version , hand shear universal , home theatre system , hot water funnel with thermometer , injector multi hole type pintle type , internet of things explorer , lathe tool room ss and sc all geared type with minimum specification as with dro z and x axis , lcd tv 21 inch , led lighting system , led tv trainer kit , marking table ci with mild steel stand , metering pump , nutch filter , pillar electric drill machine , planimeter , plastic welding machine with hot air gun , power drill machine , prismatic compass , radiator cut section-cross flow , radiator cut section-down flow , radiator pressure cap , redwood viscometer , rotary drum drier , screw pump , sedimentation equipment , shaded pole motor , sight glass level indicator , sparkler filter , split ac , split ac inverter technology , ss and sc centre lathe all geared , starter motor axial type pre engagement type and construction of axial type , storage type water cooler hot and cold , telescopic alidade , three four door refrigerator inverter type , thyristor igbt controlled vvvf ac motor drive with control panel , tinnmans shear , total station , transit theodolite with stand with all accessories , turbocharger cut sectional view , ultrasonic injection cleaning equipment , universal tool and cutter grinder , vrf vrv ac unit , water cooled induction welding brazing machine. , water cooler storage type , water dispenser bubble type hot and cold , water pump for dismantling and assembling , wireless communication modules for interfacing with microcontrollers rfid card reader finger print zigbee gps gsm bluetooth wifi , working condition of diesel engine crdi 4 stroke engine assembly with fault simulation board , working condition of ev electric vehicle car , apparatus for measurement of thermal conductivity of good and bad conductors , air blow gun with standard accessories , air ratchet with standard accessories , analog component trainer , angle truing attachment for surface grinding machine , apparatus for measurement of coefficient of expansion thermal of solid and liquid , apparatus for measurement of construction of efficient of expansionthermal of solid pulinger s apparatus , automatic reverse forward starter , autotransformer , belt tensioner gauge , bench lever shears , bench vice , binocular , boiling point and melting point apnaratus , bourdon tube c type pressure gauge , box sextant , cable straight jointing kit , calculator scientific non programmable , capsule type pressure gauge , cell phone power source with charger chords for different cell phones , chromatographic equipment , compression testing gauge suitable for diesel engine with standard accessories , computing scales five hectares , computing scales two hectares , condenser for distillation lebig , cork press , dc regulated variable programmable dc power supply , digital viscometer , digital and analog bread board trainer , digital balance 200 gm , digital balance 10 kg , digital ic tester , digital ic trainer , digital micrometer outside , dimmer starter , discrete component trainer basic electronics trainer , dmx controller , dual dc regulated power supply , dusk and dawn switch , electro magnetic relay with control panel a cut out relays b over current c under voltage , engineers stethoscope , ev charger home 1 phase input , ev charge, 3 phase input , fibre glass tape , fuel injection pump dismantling tool kit universal vice , fuel injection pump ve pump distributor fuel rotary pump dpc pumps along with special tools and accessories , growler armature , gunter s chain , hand reamers adjustable , height indicators , hollow punch set of seven pieces , hydraulic crimping tool for ug cable crimping with bits , hydraulic jack hi lift type 3 ton capacity and 5 ton capacity , impulse relay , indexing head with motorized for tool and cutter grinding machine , injector cleaning unit , injector testing set hand tester , insulators including hardware fitting , inverter with battery , land measuring chain , lcd based dpm , lcr meter digital handheld , leveling staff , levelling staff , liquid penetrate inspection kit , machine vice , magnet bar for magnetizing through compass needles , magnetic flux meter , metal cross staff box type , mppt based charge controller , multi scan tool with oscilloscope , multiangle magnetic clamp set , offset rod , oil pump for dismantling and assembling , pen knife , ph meter digital ,, workshop outfit, as per specification
Agency / Dept :
department of industrial training
Due Date :
Sep 14, 2026 (2 days left)
Tender Value :
2.42Cr
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16910002
Location : surat , gujarat
tender for all-inclusive operation & maintenance of smc 100 kwp rooftop solar photovoltaic power plants and accessories of second life battery for 05 (five) years installed at althan electric bus depot of surat municipal corporation.
Agency / Dept :
urban development and urban housing department
Due Date :
Aug 29, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16670998
Location : jind , haryana
tender for requirement for premises on lease and rental basis - intends to acquire commercially approved premises with adequate parking space, direct 24 hrs access, good visibility on long term lease basis at uchana near bus stand centres on prime location in having required carpet area 80 to 100 sqft for opening a new branch premises should preferably be on main road and premises with more crowded area will be preferred. premises should preferably be newly constructed with all amenities like parking facility, 24 hour water & power supply etc. water and electricity connection should be available. vitrified flooring tiles (as per bank’s requirement) required for offered premises. rolling shutter to be provided by landlord. all windows to be provided with iron grills. space for installing v-sat should be available on roof of the offered premises. separate electric meter in bank’s name with three phase electric connection for offered premises to be provided by landlord as per required load (5-7 kva). space for installing solar panel at roof.
Agency / Dept :
bank of baroda BOB
Due Date :
Aug 12, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16671001
Location : mahendragarh , haryana
tender for requirement for premises on lease and rental basis - intends to acquire commercially approved premises with adequate parking space, direct 24 hrs access, good visibility on long term lease basis at bus stand akoda mahendragarh centres on prime location in having required carpet area 80 to 100 sqft for opening a new branch premises should preferably be on main road and premises with more crowded area will be preferred. premises should preferably be newly constructed with all amenities like parking facility, 24 hour water & power supply etc. water and electricity connection should be available. vitrified flooring tiles (as per bank’s requirement) required for offered premises. rolling shutter to be provided by landlord. all windows to be provided with iron grills. space for installing v-sat should be available on roof of the offered premises. separate electric meter in bank’s name with three phase electric connection for offered premises to be provided by landlord as per required load (5-7 kva). space for installing solar panel at roof.
Agency / Dept :
bank of baroda BOB
Due Date :
Aug 12, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16313410
Location : medinipur , west bengal
Source : GEM Tenders
tender for electrical items led luminaire for high bay lighting (q3) , xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , supply and fixing for sub main wiring with two run of single core 1 phase pvc insulated unsheathed cable and including volts grade, pvc 6.0 sqmm size , supply and fixing for sub main wiring with two run of single core 1 phase pvc insulated unsheathed cable and including volts grade, pvc 4.0 sqmm size , supply and fixing for sub main wiring with two run of single core 1 phase pvc insulated unsheathed cable and including volts grade, pvc 1.5 sqmm size , supply and fixing of bell push suitable to work on 230 volts ac supply complete all as specified. , supply and fixing of bell ding dong type electric ac, 230v, single phase, complete all as directed by eic , supply and fixing of mcb 8 way, distribution boards with sheet metal enclosure, double door, ip 43 protection , supply and fixing of mcb, single pole and neutral, 32 to 63 amps, 240 volts, c curve, 10ka all complete with and taking down old unsv one as specified and as directed. , supply and fixing of mcb, single pole, 5 to 32 amps, 240 volts, c curve, 10 ka all complete all as specified and as directed. , material and labour for point wiring with 1.5 sqmm pvc insulated frls cable,single core copper cable working voltage 1100 volts grade, a one socket out let 5 by 6 amps point on the independent board , material and labour point wiring with 2.5 sqmm pvc insulated frls cable,single core copper cable voltage 1100v, a - one socket out let 15 by 16 amps point on the independent board , supply and fixing of switch socket combination flush type multipurpose 2 by 3 pin 5 amps 2 in 1 230 volts complete all as specified and directed. , supply and fixing of switch socket combination 2 in 1 multipurpose 3 by 5 pin 5 by 15 amps flush type complete all as specified and directed. , excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations of poles etc , returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick in soil complete all as specified and directed. , removing excavated material soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point , material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches directed , material and labour for laying well burnt old size bricks, fly ash bricks, straight or curved on plan, laid flat with width equal to length of brick, laid dry over electric cable for protection. , supply and fixing loop in- loop out fuse junction box of internal dimention 250 x 200 x 100mm made of frp sheet with weather proof canopy , material and labour for steel tubular poles complete with cast iron base palate, final taper plug bolts, nuts,screws with two as coats specified of aliminium type 410 paint sp-22, 8.5 meter long , material and labour for flexible pvc insulated multicore fr pvc sheathed multistranded copper conductor cable of 1.5 sqmm x 3 core for voltage grade up to 1100 v , material and labour for pcc 1-4-8 type d-2 with 40 mm graded aggregate for foundation of pole, stay, etc all as specified and as directed by engr-in-charge. , material and labour for plain cement concrete 1-2-4 b1 type using 20 mm graded coarse stone aggregate for foundation by coping of poles complete all as specified and as directed by engr-in-charge. , material and labour for rusted by corroted security light bracket made out of gi pipe of light grade1.6 rm x 32mm dia , supply three phase, installation, maximum testing load and 12 commissioning kw, of outdoor street light panels, degree, electrical items, with multistranded copper conductor, frlsh cable drawn in with casing caping casing capping not less than 25 mm isi marked including allaccessories of copper conductor including one run of pvc insulated unsheathed 6.0 sqmm cable with multistranded complete all as specified green pvc insulated as contineous earth conductor cable connected to earth dolly and directed by eic. 2 x 6.0 sqmm + 1 x 6.0 sqmm earth wire, with multistranded copper conductor, frlsh cable drawn in with casing caping casing capping not less than 25 mm isi marked including allaccessories of copper conductor including one run of pvc insulated unsheathed 4.0 sqmm cable with multistranded complete all as specified green pvc insulated as contineous earth conductor cable connected to earth dolly and directed by eic. 2 x 4.0 sqmm + 1 x 4.0 sqmm earth wire, with multistranded copper conductor, frlsh cable drawn in with casing caping casing capping not less than 25 mm isi marked including allaccessories of copper conductor including one run of pvc insulated unsheathed 1.5 sqmm cable with multistranded complete all as specified green pvc insulated as contineous earth conductor cable connected to earth dolly and directed by eic. 2 x 1.5 sqmm + 1 x 1.5 sqmm earth wire, supply and fixing of bell push suitable to work on 230 volts ac supply complete all as specified., supply and fixing of bell ding dong type electric ac, 230v, single phase, complete all as directed by eic, 240 ertth single pole and neutral, with 200 amps rated copper bus bar (as per oem), neutral link, complete link earthing studs, suitable for fixing mcbs, without mcbs fixed flush to wall/other surface all as specified and as directed, supply and fixing of mcb, single pole and neutral, 32 to 63 amps, 240 volts, c curve, 10ka all complete with and taking down old unsv one as specified and as directed., supply and fixing of mcb, single pole, 5 to 32 amps, 240 volts, c curve, 10 ka all complete all as specified and as directed., conforming to is-694 with stranded copper conductor in and including pvc medium grade casing caping double lock pattern and accessories isi marked on walls by other surface etc incl provision of 1.5 sq mm pvc insulated unsheathed single core multistranded copper conductor cable frls as earth continuity conductor green in colour and pvc switch box heavy duty of appropriate size on wall by other surface isi marked for housing switches by socket outlet, fan regulators etc complete all as specified and directed for the following, conforming to is-694 with stranded copper conductor in and including pvc medium grade casing caping double lock pattern and accessories isi marked on walls by other surface etc incl provision of 2.5 sq mm pvc insulated unsheathed single core multistranded copper conductor cable frls as earth continuity conductor green in colour and pvc switch box heavy duty of appropriate size on wall by other surface isi marked for housing switches by socket outlet, fan regulators etc complete all as specified and directed for the following, supply and fixing of switch socket combination flush type multipurpose 2 by 3 pin 5 amps 2 in 1 230 volts complete all as specified and directed., supply and fixing of switch socket combination 2 in 1 multipurpose 3 by 5 pin 5 by 15 amps flush type complete all as specified and directed., and getting out including trimming the sides and forming bottom surfaces to required levels in soft/loose soil complete all as specified and directed., returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick in soil complete all as specified and directed., removing excavated material soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed, material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches directed, material and labour for laying well burnt old size bricks, fly ash bricks, straight or curved on plan, laid flat with width equal to length of brick, laid dry over electric cable for protection.complete all as specified and directed., locking screw fitted with and including 50 amp rated 4 way connectors for 3 phase and neutral incoming by outgoing, mounted in the box, fixing on street pole by rail poles including necessary aluminium clamps, suitable glands, lugs and gi nut and bolt all as specified and as directed by engr-in-charge., including painting allexternal exposed steel surfaces over a coat of red oxide zinc chrome primer and all internal surfaces and external surfaces in contact with concrete with two coats of black bitumenous paint complete all as specified and as directed., conforming to is 694-2010 for connection of directed light fitting by from engineer-in-charge., material and labour for pcc 1-4-8 type d-2 with 40 mm graded aggregate for foundation of pole, stay, etc all as specified and as directed by engr-in-charge., material and labour for plain cement concrete 1-2-4 b1 type using 20 mm graded coarse stone aggregate for foundation by coping of poles complete all as specified and as directed by engr-in-charge., for inserting of light fitting, properly shaped, bended, & fixed on the pole through ms flat and by nut,bolt and washer of suitable sizes incl dismantling the old unsv existing one complete all as specified by engr-in-charge., tripple pole & neutral prewired with digital timer switch,contactor tp rating 65 amp and mcb , 63 amp,complete all as specified and directed.
Agency / Dept :
indian army
Due Date :
Aug 05, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16345928
Location : vadodara , gujarat
tender for requirement for premises on lease and rental basis - invites proposals/ offers in two bid systems from the owners/ builders/ developers having clear and marketable title over the offered/ proposed premises should be built-up property on ground floor (ready for occupation or likely to be ready for occupation within a period of 3 months) with a carpet area of 1330 sq.ft/ as per bank’s requirement for maretha branch the property must be situated within a radius of 1 kilometer from the existing branch. it must be located on bus stand road with all facilities including adequate power supply at maretha distt vadodara on lease and rental basis the following amenities have to be provided by the landlord:  exclusive 30 kva power supply to the branch. wall putty finishing with bank prescribed color for internal walls/pillars and vitrified flooring tiles (as per bank’s requirements) required for offered premises.-2- separate toilets for gents & ladies and structural constructions/changes as required by the bank. construction of 10 x 8 onsite atm.  premises should be on main road, preferably, premises should have exclusive parking facilities, 24-hour water & power supply etc. electricity and water should be available round the clock.premises should have proper drainage connection / sewage system and washroom for ladies and gents separately. the owner shall provide and installation rolling shutters with central floor-embedded locks, in addition to side locks, for both the atm and branch entrances, at their own expense.the owner shall provide and installation a collapsible gate, at their own expense on branch entrances. the owner shall enamel paint the main shutters, collapsible gate, and atm shutter in accordance with the bank's specifications and requirements, at their own expense. all windows to be provided with iron grills.  to provide sufficient space on the roof/ terrace of the building for installation of vsat/solar panel/radio frequency tower etc as per requirement of bank at owner’s cost. separate electric meter with three phase connections for offered premise for branch to be provided by landlord as per required load on landlord expenses. safe deposit vault (strong room) and ramp facility to be constructed by landlord as per bank’s norms within stipulated period at owner’s cost. structural constructions/ changes as required by the bank.  wall putty finishing with bank’s prescribed color for internal walls/pillars. premises should have regular water connection/supply and dedicated water storage facility. owner should provide a suitable space outside the branch and atm for the installation of the outdoor unit of the air conditioner
Agency / Dept :
bank of baroda BOB
Due Date :
Aug 03, 2026
Tender Value :
Refer Document
View Documents
T18 Ref No : 16464743
Location : pune , maharashtra
Source : GEM Tenders
tender for cable joining kit - item 1 , item 2 , item 3 , item 4 , item 5 , item 6 , item 7 , item 8 , item 9 , item 10 , item 11 , item 12 , item 13 , item 14 , item 15 , item 16 , item 17 , item 18 , item 19 , item 20 , item 21 , item 22 , item 23 , item 24 , item 25 , item 26 , item 27 , item 28 , item 29 , item 30 , item 31 , item 32 , item 33 , item 34 , item 35 , item 36 , item 37 , item 38 , item 39 , item 40 , item 41 , item 42 , item 43 , item 44 , item 45 , item 46 , item 47 , item 48 , item 49 , item 50 , item 51 , item 52 , item 53 , item 54 , item 55 , item 56 , item 57 , item 58 , item 59 , item 60 , item 61 , item 62 , item 63 , item 64 , item 65 , item 66 , item 67 , item 68 , item 69 , item 70 , item 71 , item 72 , item 73 , item 74 , item 75 , item 76 , item 77 , item 78 , item 79 , item 80 , item 81 , item 82 , item 83 , item 84 , item 85 , item 86 , item 87 , item 88 , item 89 , item 90 , item 91 , item 92 , item 93 , item 94 , item 95 , item 96 , item 97 , item 98 , item 99 , item 100 , item 101 , item 102 , item 103 , item 104 , item 105 , item 106 , item 107 , item 108 , item 109 , item 110 , item 111 , item 112 , item 113 , item 114 , item 115 , item 116 , item 117 , item 118 , item 119 , item 120 , item 121 , item 122 , item 123 , item 124 , item 125 , item 126 , item 127 , item 128 , item 129 , item 130 , item 131 , item 132 , item 133 , tower bolts (non-ferrous metals) v2 as per is 204 (q2) , led tube light (retrofit type) (q2) , led garden light (v2) (q2) , led batten light (led tube light) (v2) (q2) , pvc insulated copper cable single core and multi core circular sheathed with rigid conductor (v2) isi marked to is 694 (q2), straight through joint 22 kv 185 sqmm, straight through joint 22 kv 300 sqmm, bus bar insulator 11 kv, ht ug cable 22 kv size 3 core x 150 sqmm, heat strinkable joint strait through for 22kv size 150 sqmm, end termination indoor type 22 kv 300 sqmm, straight through joint 22 kv 150 sqmm, disc insulator 11 kv, end termination outdoor type 22 kv 120 sqmm, pvc line separator 3 way, street light timer switch with automatic 63 amp, digital timmer for street light, glyphosate 41 percent 1 ltr, acb 63 0a draw out type, pvc line separator 4 way for lt 440 vac oh, pvc line separator 2 way, conducting jelly suitable for electric terminals hv grade, city light with cable dome or cover for retrofit 15w cfl or led bulb, switch socket combination outlet 5 pin 15 or 16 amps flush type, modular motor starter 32 amp with red and green button, pl lamp led 18 watt cross pin, led 9 or 10 w decorative ultra slim fitting, db box and socket with plug and mcb 20 amp sp for ac, pvc spn box one way, surface ceiling light 1 x 11 watt cfl, casing n caping various size 25 mm, isolator 63 a, 6 or 16 amp switch socket combined with box, pvc board 10 x 12, switch socket combination outlet 5 pin 5 or 6 amps flush type, pvc board 4 x 7 make press fit, led lamp 4 pin 36 watt, modular cover plate 6 moudule, db tpn 4 way double door, cable flexible twin twisted copper concuctor elect, fan rod 36 inch upto 400 mm, fan rod 24 inch upto 400 mm, fan hook d type, pvc board 4 x 4 make press fit, cover plate 4 moudule, cover plate 2 moudule, pvc board 6 x 8 make press fit, modular pvc box 3 module, pvc board 8x10 make press fit, ball valve set brass 20 mm, ball valve set brass 25 mm, ball valve set brass 15 mm, ball valve set brass 40 mm, foam rubber 40 density cushion 21 x 22 x 4 inch duly covered with tapesity cloth stiched for sofa set 5 seater with plastic zip, mirror for table dressing ladies 365 x 220 x 5mm, plywood one side teak face size 8 x 4 x 3 mm, mirror for table dressing gents 350 x 760 x 5mm, rexine cloth, cp handles 125 mm or 130 mm long, knob for drawer or shutter, sunmica 8 inch x 4 inch x 1 mm thick commerical, sofa set foam 40 density sheet 6 ft x 3ft x 4 inch thick, cloth tapestry width 120 cm, sunmica laminate sheet matt 8 ft x 4 ft x 0.8 mm thick, brass lock with duplicate key for almirah med steel, coat hooke 4 inch aluminium, chromium plated knobs for drawer or shutter, cloth malmul white width 42 inch or 35 inch, orange colour powder for polishing of wooden furniture, elbow gi 3 way 32 mm dia med grade, check nut gi 32 mm dia med gde for gi charpoy, teak wood beading 15 x 6mm thick x 2 mtr, beewax, raw sina yellow colour, wire gauge mosquito proof 15 mesh x 26 gauge x 1.20 m width x 15m long aperture 150 microns, app polymer modified membrane 3mm thick, gauge woven wire mesh 28 g x 14 m x 3 ft wide x 15 mtr long aperture 150 microns, wire gauge mosquito proof 15 mess x 26 gauge x 0.90 m width x 15 m long aperture 300 microns, mirror cabinet in ptmt alloy, toilet paper holder cp, urinal waste coupling 32 mm symet, hanger with 6 pegs, pvc outlet for low level flush 40 mm x 750 mm, valve washer all type plunger, spindle for bib tap 15 mm 3 number half turn, hex nut and bolt size 3 or 16, flush tank float valve pvc, spindle for bib tap 15 mm 1 number, cup bord knobs, brass spindle for pillar tap, brass spindle for mixer tap, spindle for bib tap 15 mm 2 number, cub board channel size 18 ft, glass shelf 600 mm, cupboard channel ss 16ft, door stopper alum 150 mm size, handle door bow type steel of size 200 mm as per specification, handle door bow type steel of size 125 mm as per specification, doctor fixit pidicrete urp, pvc short bend for low level flush cistern 10 ltr, handle door bow type steel of size 150 mm as per specification, plywood 1 side teak faced size 8 x 4 x 3.5 or 4 or 3 mm, pvc tee 110 mm, handle door bow type steel of size 100 mm, socket ms cp l type for 20 mm curtain rod, spindle for mixer, pvc socket 110 mm, handle door bow type alum of size 100 mm, cp hinges for itwc, mixer leg, pvc bend 40mm, pvc socket 75 mm, pvc tee 75 mm, pvc socket 40 mm, handle door bow type alum of size 125 mm, pvc bend 75 mm, aluminium sheet 21 guage, second class tw wooden stopper for doors of size 50 mm x 25 mm x 125 mm, pvc tee 40 mm, flush handle pvc, ll nd class tw of size 50 mm x 35 mm x 12 ft for general purpose, cutting wheel 100 mm bosch iron cutter, bolted head metal fastener size 10 mm, square plate tower bolt stb 01 rod 10mm and 150mm size 16 pieces per box, second cl hw beading of size 12 mm x 12 mm x 10 clean swan, second cl hw beading of size 50 mm x 50 mm x 10 clean swan, spindle for concealed cp stop cock, pvc connection with cp brass coupling both end 15 mm x 600 mm, second cl hw beading of size 25 mm x 40 mm x 10 ft clean swan, pyramid door stopper single sds 05 150 mm size, second class hw beading 2 ft x 1 ft, pvc bend of size 40 mm, washer for ll flush tank, mixer washer 100 nos per packet, pvc bend of size 50 mm, ball valve set symet 20 mm, ball valve set symet 25 mm, ball valve set symet 15 mm
Agency / Dept :
indian army
Due Date :
Aug 07, 2026
Tender Value :
Refer Document
View Documents

Unlock Full Tender Access

Start Free Trial to download documents before deadline

Start Free Trial
T18 Ref No : 16121822
Location : bardhaman , west bengal
Source : GEM Tenders
tender for supply laying testing and connecting xlpe sheathed pvc insulated screened pvc size 3.5 core 240 sqmm complete all as specified and as directed. , supply installation testing and commissioning of silent type diesel engine driven generating set with governing class g2 including sound reducing canopy sound level not more than 75db , m and l earthing complete with gi steel earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground earth pit not less than 2.25mtr , excavating in trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth getting out in soft loose soil complete all as specified and as directed. , returning filling in including spreading levelling watering and well ramming in layers not exc. 250mm in soft loose soil complete all as specified and as directed. , removing excavated materials soils not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the starting point in soil complete all as specified and as directed. , m and l sand cushioning dry in trenches for protection of ug cables below above and around the ug cable laid in trenches of 230mm , m and l for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of ug cable complete all as specified and as directed. , s and f galvanised iron pipe 80mm bore dia light grade for protection of ug cable laid in floors road crossing , s and f hdpe dwc double walled corrugated of diameter 90 mm including disconnection and connection of cable , material and labour for manufacturing installation testing and commissioning of factory made and tested cpri approved amf , m and l for surface excavation n.exc not exceeding 30 cm deep and averaging 15cm deep , m and l for hardcore using broken stone or boulders of gauge n exc. 63 mm deposited spread and levelled in layers n exc. 15 cm thick , m and l for cement concrete in foundations filling and mass concrete type d2 1 4 8 , m and l for pcc 1 2 4 type b1 using 20mm grade aggregate as in coping for pole inclduing form work , m and l for excavating in post holes or similar holes each n exc 0.5 cu. m getting out returning filling in and ramming earth , s and f for steel work in tubular trusses cloumn purlin including special shaped washer nut bolt etc. , s and f prepainted galvalume aluminum zinc coating gi based plain steel sheet 0.50mm thick , m and l for preparation of steel surfaces of any description over 10 cm , m and l for machine pressed precast concrete interlocking paver block any shape and size confirming to is 156582006 , providing and laying at or near ground level factory made kerb stone of m25 grade , m and l for preparation of concrete kerb stone or plaster surface of any description not otherwise described over 10cm , s and f 4pole 630 amp changeover switch with enclosure suitable for 415 v ac 3phase 4 wire , wrecking crow bar or claw bar as per is 706 (q3), supply, laying, testing and connecting xlpe sheathed,pvc insulated screened pvc bedded,galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 volt grade of size 3.5 core 240 sqmm complete all as specified and as directed., supply, installation testing and commissioning of silent type diesel engine driven generating set with governing class g2 including sound reducing canopy (sound level not more than 75db at a distance of 1 mtr) 14 guage as per guidelines issued by central pollution control board (cpcb ivplus, 4plus), 415 volts, 3 phase, 50 hz supply complete, control panel suitable for giving an output of 250 kva and alternator of suitable capacity and rpm coupled with each other with flexible coupling mounted on anti vibration pads on foundation as recommended by manufacturer. the dg set shall comprise of self starter with batteries, turbocharger, water cooler and comprising all standard fittings, fixtures & all piping etc. as below (a) alternator directly coupled with engine and suitable to produce 415 volts, 3 phase, 4 wire system, 50 hz, 0.8 pf 1500 rpm of capacity 250 kva all as per is 13364 and upto date amendments with h class insulation, self excited, self regulated, screen protected drip proof type with two end shield ball / roller bearing with damper winding in each pole, complete all as specified and directed. (b) engine water cooled diesel engine (cpcb norms iv compliance) developing 105 bhp having self start engine (including batteries with provision of charging the batteries and leads) suitable to drive above specified alternator complete with foundation (foundation design as per oem) as per is 10001/10002, coupled directly through flexible coupling, multi cylinder four stroke, cold starting, 1500 rpm industrial type as per bs 649 or is 1601 with ai electronic governor suitable to regulate speed of dg set from no load to full load complete with fuel tank of capacity as per manufacturer s recommendation, fuel lines, exhaust pipe duly insulated with asbestos rope and with support and silencer muffiers etc. for continuous operation and standard accessories, sump pre heaters, cold start kit etc., m&l earthing complete with gi steel earth plate electrode of size 600mm x 600mm x 6mm thick, burried directly in ground, earth pit not less than 2.25mtr deep below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to the galvanised iron strip of size 25x4mm by means of bolts, nuts, check nuts and washers of galvanised steel and earth lead protected by provision of 40mm bore gi pipe medium grade and including provision of concrete pit in pcc 1 2 4 type b 1 (using 20mm grade crushed stone aggregate) with 40mm thcik rcc (type b 1) cover reinforced with 8mm dia tmt bar both ways with 12mm dia round bar handle and frame of angle iron 25x25x3mm with lugs 02 nos and 20mm bore gi light grade watering pipe with funnel and wiremesh and filling common salt and charcol and test point with fixing arrangements and including necessary excavation in any type of soil, returning filling in and removing excavated soil to a distance of 50mtr from the site, complete all as shown on electrical plate no 3 of mes ssr part i and directed., excavating in trenches not exc. 1.50 mtr wide and not exc. 1.50 mtr in depth, getting out in soft / loose soil, complete all as specified and as directed., returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 250mm in soft/loose soil, complete all as specified and as directed., removing excavated materials (soils) not exc. 50.00 mtr and depositing where directed at a level not exc. 1.50 mtr above the starting point in soil, complete all as specified and as directed., m&l sand cushioning (dry) in trenches for protection of ug cables (below, above and around the ug cable laid in trenches) of 230mm spread thickness and consolidated (punned) upto 180mm thickness, complete all as specified and as directed. (note for the purpose of payment, punned thickness of sand cushioning only shall be measured and paid)., m&l for fly ash bricks locally available laid dry width wise across the line of cable in trenches for protection of ug cable, complete all as specified and as directed., s&f galvanised iron pipe 80mm bore (dia) light grade for protection of ug cable, laid in floors/ road crossing, fixing to pole with mild steel clamps, nuts, bolts, etc., complete all as specified and as directed., s & f hdpe dwc (double walled corrugated) of diameter 90 mm including disconnection and connection of cable near panel/oh for pipe fixing including joints complete all as directed., material and labour for manufacturing, installation testing and commissioning of factory made and tested, cpri approved amf panel for 250 kva dg set, indoor type, weather, vermin proof, free standing floor mounting type mounted of floor/over the duct, with required mounting channel, cable alley for all the feeders, suitable for 440 volts, 3 phase 4 wire 50hz ac supply system, conforming to is 5039, ip54 class protection and made of 3mm crca mild steel sheet with 50x 50x6mm angle iron frame, hinged doors, front & rear opeing and locking arrangement with necessary bus bar arrangment with insulated al. bus bar 1000 amps rating for phase & neutral, 4 strips, installed on epoxy insulators housed in separated bus chambers covered with heat shrinkable sleeves with necessary bus bar tapings for mccb with suitable capacity of al. bus bar strips including heat shrinkable sleeves, and providing extended bus bars with chember arrangement for outgoing cables, copper control wiring of required size for instruments including necessary pcc in 1 2 4 type b1 using 20mm graded stone aggregate for platform of suitable size , prewired with copper cable of suitable size all as standard practice of manufacturer specifications with the following acessories incomer1 & 2 (main & dg) (a) busbars 1000a tpn 415volts 3phase 4 wire color coaded aluminium busbars 1 lot (b) mccb 630a fp edo 50ka microprocessor based ( o/c, s/c & e/f) release with motor, closing & shunt, aux. contact 4noplus4nc 2 nos. (c) amf relay (econ) 1 nos. (i) digital ammeter 1 nos. (ii) digital voltmeter 1 nos. (iii) ct 1000/5a cl1 10va 1 nos (iv) phase indication light red 230v ac 1 nos. (v) phase indication light yellow 230v ac 1 nos. (vi) phase indication light blue 230v ac 1 nos. (vii) indication lamp 22mm dia color red 240v ac (on) 2 nos. (viii) indication lamp 22mm dia color green 240v ac (off) 2 nos. (ix) indication lamp 22mm dia color amber 240v ac (trip) 2 nos. etc., m&l for surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed., m&l for hardcore using broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, all as specified and as directed., m&l for cement concrete in foundations, filling and mass concrete type d2 1 4 8 (using 40mm grade aggregate), m&l for pcc 1 2 4 type b1 (using 20mm grade aggregate) as in coping for pole inclduing form work and finishing the surfaces even and smooth etc complete all as specified and directed., m&l for excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/loose soil complete all as specified and as directed., s & f for steel work in tubular trusses, cloumn, purlin including special shaped washer, nut, bolt etc. complete using erw or induction butt welded tubes conforming to i.s.1161 1979 grade st.240 complete all as specified., s&f prepainted galvalume aluminum zinc coating gi based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, m & l for preparation of steel surfaces of any description over 10 cm in width or girth not otherwise described and two coat of synthetic enamel paint over one coat of red oxide complete all as specified, m&l for machine pressed precast concrete interlocking paver block any shape and size confirming to is 156582006 of 60 mm thickness, m35 grade with grey cement and pigment all as specified and directed., providing and laying at or near ground level factory made kerb stone of m25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1 3 (1 cement 3 coarse sand), including marking joints with or without grooves (thickness of joints except at sharp curve shall not more that 5mm), including making drainage opening wherever required complete as specified and as directed., m&l for preparation of concrete kerb stone or plaster surface of any description not otherwise described over 10cm width or girth and applying two coat of water based floor coat paint emulsion over one coat of self priming coat emulsion by diluting with 30% to 40% water complete all as specified and directed by engrincharge., s&f 4pole, 630 amp changeover switch with enclosure, suitable for 415 v ac, 3phase, 4wire, 50 hz system, for changeover between main supply and dg set. the switch shall be heavyduty, onload type conforming to is/iec 609473, with silver alloy contacts and adequate breaking capacity. the unit shall be mounted on a sturdy angle iron frame fixed over pcc block with necessary nuts, bolts and support structure. terminals shall be suitable for cable/busbar connection and provision for safe manual operation (or motorised operation, if required) shall be included complete with all accessories, mounting hardware all as specified and directed.
Agency / Dept :
indian army
Due Date :
Jul 17, 2026
Tender Value :
Refer Document
View Documents

Every year, central and state government departments release thousands of high-value contracts specifically dedicated to All Electric Bus. Whether it involves bulk material supply, executing specialized operational services, or end-to-end turnkey project execution, the demand for capable vendors in the All Electric Bus sector is massive.

At Tender18, we help businesses cut through the noise and exclusively target the exact work categories they specialize in. Instead of browsing through generic procurement sites, our platform isolates high-potential opportunities that match your specific industry capabilities.

Work Dynamics in the All Electric Bus Sector

Government requirements for this specific vertical generally fall into distinct procurement patterns:

  • Product & Material Supply: Tenders focused strictly on sourcing, testing, and delivering high-quality items that meet the exact technical specifications of the buyer.
  • Service Level Agreements (SLAs): Long-term hiring of expert agencies for routine maintenance, manpower deployment, or continuous operational management.
  • Execution & Turnkey Projects: Comprehensive contracts where the bidder is responsible for everything from raw material procurement to final site installation and testing.

By focusing purely on your core strength in All Electric Bus, you can build a highly profitable and stable pipeline of government clients.

Stop wasting time filtering through irrelevant notices. Our All Electric Bus Tender Information Service is engineered for precision. We track exact product codes, service names, and specialized work terms across all government portals nationwide. When a buyer publishes a requirement that matches your specific business profile, our system alerts you instantly.

Deep Technical Insights & Documentation For All Electric Bus Tenders

Bidding for specific works requires studying strict technical parameters. We provide immediate access to the core documents you need to evaluate the project:

  • Detailed Specifications & Drawings: Download the exact engineering guidelines, material testing standards, and quality benchmarks demanded by the buyer for All Electric Bus.
  • Financial BOQ Spreadsheets: Access the official blank pricing formats where you need to input your unit rates, tax configurations, and total bid value.
  • Real-Time Technical Amendments: If the buying department changes the product specifications, alters the service scope, or shifts the delivery timeline, we instantly update the parent file so you are never caught off-guard.

Winning a contract for All Electric Bus depends entirely on how perfectly your technical capabilities match the buyer’s demands. Even if you have the best product or service, a poorly formatted document or a missing compliance certificate will lead to instant technical rejection. Tender18’s Tender Bidding Service eliminates this risk by taking complete ownership of your digital submission.

Flawless Compliance & Portal Execution For All Electric Bus Tenders

Under this service, Tender18 assigns a Dedicated Experienced Technical Person to your profile. This expert handles the heavy lifting of the entire bidding cycle:

  • Capability Mapping: We thoroughly cross-check your past completion certificates, ISO standard proofs, and financial turnover against the strict eligibility criteria required for All Electric Bus bids.
  • Secure System Integration: Our technical desk seamlessly links your Class III Digital Signature Certificate (DSC) with the required e-procurement servers to securely encrypt your technical and financial envelopes.
  • Error-Free Financial Uploads: We audit your quoted BOQ pricing sheets for any formula or formatting errors before the final upload, ensuring your bid is successfully locked before the portal's closing hours.

Government buyers are aggressively using the Government e-Marketplace (GeM) for the direct procurement of All Electric Bus. If your business profile is not accurately mapped on this portal, you remain practically invisible to these purchasing officers. Recognized as a trusted and expert GeM consultant, Tender18 offers specialized support to build, optimize, and maintain a highly visible vendor account for your business.

With an industry-leading support success ratio of over 95%, we handle the complex marketplace compliance so you can focus entirely on executing your orders

Expert Profile Management & Catalogue

Our dedicated consultants ensure your GeM presence is structurally perfect:

  • Precise Catalogue Listing: We upload and categorize your specific offerings under the exact search terms and parameters used by government buyers looking for All Electric Bus, ensuring maximum search visibility.
  • OEM Dashboard & Assessment: For original manufacturers and creators, we guide you through the mandatory Quality Council of India (QCI) vendor assessments to successfully unlock your official OEM panel.
  • Profile Compliance & Caution Money: We manage your statutory documentation, brand approvals, and caution money limits to keep your account immune from technical suspensions.

Strategic Live Bid Participation

Beyond setup, we actively drive your market participation. Our team expertly handles the digital paperwork and rate configurations for GeM Custom Bids and Reverse Auctions (RA) related to All Electric Bus, maximizing your chances of securing L1 status.

1.

How do I find government contracts exclusively matching my work in All Electric Bus?

The easiest way is through the Tender18 platform. Instead of searching department by department, our system uses advanced keyword matching to gather all live supply, service, and execution tenders related directly to your core business in one place.

2.

Do I need specific testing or quality certificates to apply for these contracts?

It heavily depends on the nature of the work. For supply contracts, buyers often ask for ISO certifications, BIS marks, or specific lab testing reports. For service contracts, they may ask for labor licenses or past performance certificates (work orders).

3.

What is a BOQ and why is it important for my bid?

The Bill of Quantities (BOQ) is the official financial Excel sheet where you enter your competitive prices. Any mistake in this file—like adding extra rows, changing formulas, or saving it in the wrong format—will cause the portal server to reject your entire bid.

4.

Are samples required to be submitted physically before the digital bid opens?

For many product-based All Electric Bus tenders, buying departments do ask bidders to submit physical samples to their office before the digital technical evaluation date. This requirement is always clearly mentioned in the official NIT document.

5.

How does the Dedicated Tender Expert from Tender18 help me?

Our assigned expert manages your total portal compliance. They extract the hidden rules from long tender PDFs, create a precise document checklist for your team, map your digital signature, and securely upload your technical and financial files onto the government servers.

6.

What is the role of a Digital Signature Certificate (DSC)?

A Class III DSC is a secure USB device that contains your digital identity. You cannot upload a bid without it. It is used to securely encrypt and lock your sensitive price data and technical documents so no one can view them before the official opening date.

7.

As an MSME, can I get financial benefits when bidding for All Electric Bus?

Yes, the government strongly supports MSMEs. By uploading a valid Udyam Registration Certificate in the technical envelope, small businesses are frequently exempted from paying the initial Tender Document Fee and the Earnest Money Deposit (EMD).

8.

Why should I list my services or products on GeM for this category?

GeM is now the primary digital marketplace for all government agencies. If you are properly cataloged for All Electric Bus, officers can view your profile and generate direct purchase orders or invite you to participate in exclusive Custom Bids.

9.

What makes Tender18 a reliable GeM support partner?

As a highly trusted and expert GeM consultant, Tender18 holds a proven support success ratio of over 95%. From flawless profile creation and complex catalogue mapping to OEM panel approvals and live Reverse Auction (RA) support, we handle it all seamlessly.

10.

What does "L1" mean in these government contracts?

"L1" stands for "Lowest Bidder 1". In government procurement, after all technical envelopes are approved, the financial sheets (BOQs) are opened. The bidder who has quoted the lowest compliant price for All Electric Bus is declared L1 and is generally awarded the contract

GeM Registration & Consultant Services By State

View All

GeM Registration & Consultant Services By City

View All

Tender Bidding Service & Consultancy By Authorities

View All

Explore Government Tenders and GeM Portal Blogs

View All