Sales : +917069661818
Sign In
Register Now
Sample Tenders

Filters By:

T18 Ref No
Keyword
State
City
Agency
Tender ID
Due Date
Tender Source
Tender Type
Reset

Air column gauge Tenders List

▼

Latest Air column gauge Tenders in India – Verified Leads & Real-Time Insights by Tender18

Finding the right Air column gauge tenders in India’s competitive e-procurement ecosystem requires more than just access—it demands accurate data, real-time monitoring, and expert analysis.

At Tender18 Infotech Private Limited, we bring deep industry experience in government procurement to help businesses identify, evaluate, and win Air column gauge tenders efficiently. With a centralized platform aggregating 1100+ live tenders, we provide a single, trusted source for opportunities from central, state, and PSU departments.


Real-Time Air column gauge Tender Intelligence & Monitoring

Our advanced dashboard delivers actionable insights and structured tender data, enabling you to make faster and smarter bidding decisions.

We categorize Air column gauge tenders into:

  • Supply Tenders – BOQs and specifications sourced from GeM and PSUs
  • Service Tenders – NITs and scope of work from CPPP and state portals
  • EPC Projects – Large-scale infrastructure tenders with financial and design data

✔ This structured approach ensures complete transparency and deeper bid analysis before submission.


Comprehensive Sources of Air column gauge Tenders

Tender18 acts as a centralized gateway by aggregating tenders from trusted and official sources:

  • Central Government Portals – CPPP, NIC, and Government e-Marketplace (GeM)
  • Railways & Transport – IREPS and Metro Rail projects
  • Power & Energy PSUs – NTPC, ONGC, NHPC, PowerGrid
  • Defense & Strategic Sectors – MES and DRDO tenders
  • State e-Procurement Portals – Gujarat, Maharashtra, Tamil Nadu, UP, and more

✔ Every listing is verified and regularly updated to maintain data accuracy and trust.


Step-by-Step Guide to Participate in Air column gauge Tenders

1. Eligibility & Prequalification

Before bidding, ensure compliance with:

  • Financial turnover requirements (30–50% of tender value)
  • Past experience (2–3 similar projects)
  • Valid solvency certificate

2. Mandatory Documentation Checklist

Prepare the following to avoid disqualification:

  • Digital Signature Certificate (Class 3 DSC)
  • GST, PAN, MSME/Udyam registration
  • EMD (Earnest Money Deposit) or exemption proof
  • Technical bid with execution methodology

3. BOQ Analysis & Financial Bidding

The BOQ (Bill of Quantities) is the most critical component:

  • Analyze item-wise pricing
  • Ensure competitive yet sustainable quotes
  • Avoid underbidding risks (L1 pressure)

✔ Expert analysis can significantly improve your bid success ratio.


Why Tender18 is a Trusted Platform for Air column gauge Tenders

✔ Proven Expertise in Government Procurement

We combine industry knowledge with practical bidding experience.

✔ Verified & Reliable Data

All Air column gauge tenders are sourced from official portals and cross-checked for accuracy.

✔ Advanced Filtering Tools

Filter tenders by value, EMD, location, and category for precise targeting.

✔ Corrigendum & Update Tracking

Get instant alerts on deadline changes and specification updates.

✔ Historical Data Insights

Analyze past tender results to understand pricing trends and competition.

✔ End-to-End Bidding Support

From discovery to submission, including GeM onboarding and strategy.


Growth of Air column gauge Sector in 2026

With the Government of India focusing on digital procurement and infrastructure expansion, the Air column gauge sector has seen significant growth in e-tendering opportunities.

The rise of GeM-based procurement models like:

  • L1 Purchase
  • Direct Procurement
  • MSME-friendly policies

…has made it easier for startups and SMEs to participate and win contracts


Frequently Asked Questions (SEO Optimized)

How can I get daily Air column gauge tender alerts?

You can register on Tender18 and select your preferred category. You will receive daily email alerts with all new Air column gauge tenders.

Is EMD mandatory for all Air column gauge tenders?

No, MSME and Udyam-registered businesses may get exemptions. Always check the NIT for specific conditions.

What is the difference between a Air column gauge work tender and supply tender?

A supply tender involves delivering goods, while a work tender includes execution, labor, and project completion.

Can I access private Air column gauge tenders on Tender18?

Yes, we also track major private sector and EPC tenders along with government opportunities.


Get Expert Support for Air column gauge Tenders

Tender18 is more than a listing platform—we are your strategic partner in winning tenders.

Our services include:

  • Tender discovery & analysis
  • Documentation support
  • Bid strategy & submission
  • GeM registration & OEM onboarding

📞 Call / WhatsApp: +91 7069661818
🌐 Website: www.tender18.com

T18 Ref No : 15206602
Location : mangalore , karnataka
Source : GEM Tenders

tender for 3000026535 1000189938 , 1000189939 , 1000189940 , 1000189941 , 1000189942 , 1000173050 , 1000189943 , 1000189944 , 1000184181 , 1000184192 , 1000184268 , 1000184258 , 1000184243 , 1000189947 , 1000189948 , 1000189949 , 1000189951 , 1000189954 , 1000189960 , 1000189961 , 1000189965 , 1000189966 , 1000189967 , 1000189972 , 1000189973 , 1000189975 , 1000189982 , 1000189983 , 1000189984 , 1000184254 , 1000189985 , 1000189987 , 1000189988 , 1000189989 , 1000189991 , 1000189992 , 1000189993 , 1000189996 , 1000189997 , 1000189998 , 1000189999 , 1000190000 , 1000190002 , 1000184217 , 1000190367 , 1000190005 , 1000184187 , 1000164447 , 1000126572 , 1000126573 , 1000126574 , 1000190051 , 1000190052 , 1000126577 , 1000036781 , 1000190010 , 1000190054 , 1000189974 , 1000190018 , 1000190020 , 1000190021 , 1000190022 , 1000190024 , 1000190025 , 1000190028 , 1000190029 , 1000190030 , 1000126575 , 1000126576 , 1000126578 , 1000126579 , 1000126580 , 1000190033 , 1000190034 , 1000190036 , 1000190037 , 1000190038 , 1000190040 , 1000184245 , 1000184252 , 1000184253 , 1000190045 , 1000190047 , 1000190048 , 1000190050 , 1000184270 , 1000184271 , 1000184273 , 1000184274 , 1000190368 , 1000190003 , 1000190014 , 1000190015 , 1000190016 , 1000190017 , 1000190027 , 1000189937 , 1000189955 , 1000189950 , 1000189956 , 1000189957 , 1000189958 , 1000189959 , 1000189962 , 1000189978 , 1000189979 , 1000189986 , 1000189990 , 1000189994 , 1000190004 , 1000190013 , 1000190026 , 1000190039 , 1000190055 , 1000190370 , 1000190371 , 1000164762 , 1000190444 , 1000190445 , 1000190446, a2b block z9352000371 rt880, ac mcp sen. ag. sf. 32 40 mt 3p. cb z9352000368 rt880, tera7 full out dash en1500 z9352000366 rt880, trasd.pres.450bar z9352000370 rt880, harness lmi junction box cobo w6512000708 rt880, relay 24v 20 amps p n 7750000710, relay socket 7826000079 rt880, rear view mirror z2162400051 rt880, treadle valve 7683000069 hydra 830m, wiper arm & blade pantograph 8315281 hydra 830m, motor wiper 24v 17w z763200000 hydra 830m, fan 24v z7425000001 hydra 830m, cabin lamp x7581000204 hydra 830m, megasonic horn ht. 24v x7025000013 rt880, switch steering column z7872000005 rt880, wiper motor bracket 8314490 rt880, clamp gear shifter x7300000075 rt880, terminal strip 12 way z7860000006 rt880, recept dt 8 way z7892000133 rt880, wedge lock 8 way recept z7892000138 rt880, priority valve ols120 152b8142 w7926000132 rt880, pressure switch 7872100121 rt880, solenoid valve 8340241 rt880, sol coil z9926001636 rt880, coil 8342379 rt880, 19mmx229m 18x19 h rope x7780000006 rt880, compressor r9976 ac w4165200126 rt880, condenser w rec. drier r9720 3 24p w4167200054 rt880, hyd. oil cooler w7726000053 rt880, temperature switch x7872000122 hydra 830m, valve seal kit o r jack z9372005623 rt880, dirt alarm gauge z9726000021 rt880, filter element x7437000054 rt880, mcb 70a z7482000065 rt880, battery disconnect switch x7872000192 rt880, seal kit z9364000429 rt880, str 7447101001 rt880, seal kit z9372011686 rt880, brake pad assembly z9049001753 rt880, brake wiper & seal kit z9049001939 rt880, transmission filter 7437100235 rt880, fuel tank level gauge x7486000086 rt880, seal kit for lock valve derrick z9372011541 rt880, joystick w7926001540 hydra 830m, 90 deg elbow 7447040603 rt880, o ring 7755225000 rt880, o ring 7755222000 hydra 830m, seal kit lift cyl rt880 z9372011540, 80t crane oil filter p n 21913334, 80t crane water separator p n 21538975, 80t crane engine mounted fine fuel filter p n 22296415, fuel filter insert 889419 rt880, filter kit 21535312 rt880, 80t crane air filter insert p n 21377909, shock mount p n x7638000006, temperature sender switch trans z7486000166 rt880, orfs kit 9999100855 rt880, repair kit 9926105109 rt880, drive shaft kit u joint 9364101773 rt880, cap screw 9364101528 rt880, lockwasher 7950180050 rt880, fitting 1 8 straight grease 7440000000 rt880, pin weld 6689100093 rt880, pin weld 6689100094 rt880, end assy tie rod rh 9049112121 rt880, nut 9049112116 rt880, cotter pin 9049112117 rt880, 80t crane fuel filter insert pn 3838852, 80tcrane element filter 18ls7 18lz10 pn 9437100485, 80t crane filter element p n 332302, 80tcrane grease xhp222 p n c316268 can, 80t crane grease p n s 01032 63, temp. dial gauge x7486000123 rt880, tank mounted filter w7437000048 rt880, trans oil temp gauge 24v 50 150deg c z7486000094 rt880, a.c installation kit rd 5 13098 op w4165400012 rt880, air conditioner r8545 14 24p w4167400019 rt880, lift cylinder wipro u7372000190 rt880, 360 degree visual alarm x7581000238 hydra 830m, switch head side lamp x7872000097 hydra 830m, hazard switch x7872000117 hydra 830m, temp sender 150deg c m14x1.5 z7486000099 rt880, fuel gauge 24v 0 1 1 adj z7486000178 rt880, fuel sender reed switch type vdo 291 000 2234 800 z7486000180 rt880, o ring tubeless tyre 325t z7754000001 rt880, toggle switch mom on off on mom z7872000174 hydra 830m, toggle switch on off on mom z7872000175 hydra 830m, toggle switch off none on z7872000218 hydra 830m, toggle switch off none on mom z7872000219 hydra 830m, power relay 02309790 rt880, solenoid coil sh. z9926001659 rt880, yoke assy 9364100140 rt880, bearing 9364101160 rt880, kit u joint 90015249 rt880, bearing assy u joint 90061980 rt880, end assy tie rod lh 90046919 rt880, sheave assembly 6718000452 rt880, plug dt 6 way z7709000030 rt880, xmsn shifter fnr transmission shifter 7872001734 rt880, recept dt 6 way z7892000132 rt880, wedge lock 6 way recept z7892000137 rt880, plug dt 8 way z7709000031 rt880, wedge lock 8 way plug z7709000036 rt880, operator seat v7798000023 rt880, switch actuating cam x4165200133 rt880, solenoid valve z9926001601 rt880, str adapter male ors thd to male str thd 7447081201 rt880, bracket battery isolation switch w6184000314 rt880, kit u joint 9364101527 rt880, 90 deg elbow 7447040403 rt880, flange output o ring 9904110194 rt880, screw hx 1 2 unf x1 inch lg sae 5 7105180850 rt880, hydraulic piping ac cab w2165600077 rt880, seal kit v7974000035 sk rt880, electrical swivel 44 way z7753000024 rt880, seal kit w7974000049 sk rt880, w7576000120 kit lmi system rt880, sensor length z9352000079 rt880, lg cable z9352000218 rt880, angle sensor wgc 090 z9352000219 rt880

Agency / Dept : mangalore refinery and petrochemicals limited MRPL
Tender Value : 0
Due Date : May 11, 2026
View Documents
T18 Ref No : 14920859
Location : vemula , andhra pradesh
Source : GEM Tenders

tender for earth work in excavation , filling available excavated earth excluding rock , demolishing rcc work , providing and laying in position cement concrete , providing and laying in position specified grade of reinforced cement concrete , supplying and filling in plinth with sand under floors , steel reinforcement for rcc work , centering and shuttering including strutting lif in foundations footings bases of columns , centering and shuttering including strutting lif columns pillars piers abutments posts and struts , dry stone pitching 22 point 5 cm thick , neat cement punning , demolishing brick work , brick work with non modular fly ash bricks , finishing walls with textured exterior paint , finishing walls with 100 percentage premium acrylic emulsion paint , 15 mm cement plaster , random rubble masonry with hard stone , structural steel work riveted bolted or welded in built up , surface dressing of the ground including removing vegetation , removing white or colour wash by scrapping , providing and fixing glass panes with putty and glazing clips in steel doors , providing and fixing glazing in aluminium door window ventilator shutters , providing and fixing aluminium work for doors windows ventilators , providing and fixing gi chain link fabric fencing , providing and fixing ist quality ceramic glazed wall floor tiles , grading roof for water proofing treatment with cement concrete , repair to plaster of thickness 12mm to 20 mm in patche , providing and laying water proofing treatment on roofs of slabs , 0 mm thick factory made polyvinyl chloride pvc door shutter , providing and fixing factory made panel pvc door shutter consisting of frame , providing and fixing on wall face unplasticised rigid pvc rain water pipes , providing mixing and applying sbr polymer , providing and injecting approved grout 2 percentage of weight of cement used modified cement slurry made with non shrink compound in concrete rcc work , providing and injecting approved grout cement slurry made with shrinkage compensating cement in concrete rcc work , providing and injecting approved grout epoxy injection grout in concrete rcc work of approved make , providing laying spreading and compacting graded stone aggregate, repair works at intake well intermediate pumping station at parnapalle of tummalapalle, earth work in excavation by mechanical means hydraulic excavator manual means over areas exceeding 30 cm in depth 1 point5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth lead upto 50 m and lift upto 1 point 5 m as directed by engineer in charge all kinds of soil, filling available excavated earth excluding rock in trenches plinth sides of foundations etc in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering lead up to 50 m and lift upto 1 point 5 m as per direction of engineer in charge, demolishing rcc work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1 isto3 isto 6 1 cement 3 coarse sand zone iii 6 graded stone aggregate 20 mm nominal size as per direction of engineer in charge, providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement all work up to plinth level 1 isto1 point 5 isto 3 1 cement 1 point 5 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size, supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete, steel reinforcement for rcc work including straightening cutting bending placing in position and binding all complete above plinth level and below plinth level thermo mechanically treated bars of grade fe 500d or more, centering and shuttering including strutting propping etc and removal of form as per directions of engineer in charge at all leads and lif in foundations footings bases of columns all the below plinth level etc, centering and shuttering including strutting propping etc and removal of form as per directions of engineer in charge at all leads and lif columns pillars piers abutments posts and struts all the above plinth level, dry stone pitching 22 point 5 cm thick including supply of stones and preparing surface complete, neat cement punning, demolishing brick work manually by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer in charge15 point 7 point 4 in cement mortar, brick work with non modular fly ash bricks conforming to is12894 class designation 10 average compressive strength in super structure above plinth level up to floor v level in, finishing walls with textured exterior paint of required shade 13 point 45 point 1 new work two or more coats applied 3 point 28 ltr per10 sqm over and including priming coat of exterior primer applied 2 point 20kg 10 sqm, finishing walls with 100 percentage premium acrylic emulsion paint having voc less than 50 gm per litre and uv resistance as per is 15489 2004 alkali and fungal resistance dirt resistance exterior paint of required shade company depot tinted with silicon additive new work two or more coats applied 1 point 43 litre per10 sqm over and including priming coat of exterior primer applied 0 point 90 litre per10 sqm, 15 mm cement plaster with mix 1isto 6 1 cement 6 fine sand at all heights and lead as per directions of engineer in charge, random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1isto 6isto12 1 cement 6 coarse sand 12 graded stone aggregate 20 mm nominal size upto plinth level with 1 cement mortar 1 isto 6 1 cement 6 coarse sand, structural steel work riveted bolted or welded in built up sections trusses and framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete, surface dressing of the ground including removing vegetation and in equalities not exceeding 15 cm deep and disposal of rubbish lead up to 500m all kinds of soil up to all lead and lift including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc complete including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing glass panes with putty and glazing clips in steel doors windows clerestory windows all complete with 4 point 0 mm thick glass panes including cost of labor tools and tackles taxes etc complete as per the architectural drawings including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing glazing in aluminium door window ventilator shutters and partitions etc with epdm rubber neoprene gasket etc with float glass panes of 4 point 0 mm thickness weight not less than 10 kg per sqm including cost of labor tools and tackles taxes etc complete as per the architectural drawings and the directions of engineer in charge, providing and fixing aluminium work for doors windows ventilators and partitions with extruded built up standard tubular sections appropriate z sections and other sections of approved make conforming to is 733 and is 1285 fixing with dash fasteners of required dia and size including necessary filling up the gaps at junctions ie at top bottom and sides with required epdm rubber neoprene gasket etc aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle aluminium snap beading for glazing paneling cp brass stainless steel screws all complete as per architectural drawings glazing paneling and dash fasteners to be paid for separately anodised aluminium anodised transparent or dyed to requied shade according to is 1868 minimum anodic coating of grade ac 15 including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing gi chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts bolts and washers as required complete as per the direction of engineer in charge made of gi wire of dia 4 mm including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing ist quality ceramic glazed wall floor tiles conforming to is 15622 thickness to be specified by the manufacturer of approved make, in all colours shades except burgundy bottle green black of any size as approved by engineer in charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1 isto 3 1 cement 3 coarse sand and jointing with grey cement slurry 3 point 3kg per sqm including pointing in white cement mixed with pigment of matching shade complete at all leads and lifts as per directions of engineer in charge, grading roof for water proofing treatment with cement concrete 1 ratio 2 ratio4 1 cement 2 coarse sand 4 graded stone aggregate 20mm nominal size including mixing water proofing compound as per manufacturers specifications and directions of engineer in charge, repair to plaster of thickness 12mm to 20 mm in patches of area 2 point 5 sqm and under including cutting the patch in proper shape raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar including disposal of rubbish all complete as per the direction of engineer in charge, providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying a after surface preparation first layer of slurry of cement 0 point 488 kg per sqm mixed with water proofing cement compound 0 point 253 kg per sqm\nb laying second layer of fibre glass cloth when the first layer is still green overlaps of joints of fibre cloth should not be less\nthan 10 cm\nc third layer of 1 point 5 mm thickness consisting of slurry of cement 1 point 289 kg per sqm mixed with water proofing cement compound 0 point 670 kg per sqm and coarse sand 1 point 289 kg per sqm this will be allowed to air cure for 4 hours followed by water curing for 48 hours the entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around\nd fourth and final layer of brick tiling with cement mortar which will be paid for separately\nfor the purpose of measurement the entire treated surface will be measured, 30 mm thick factory made polyvinyl chloride pvc door shutter made of styles and rails of a upvc hollow section of size 60x30 mm and wall thickness 2 mm pluse or minus 0 point 2 mm with inbuilt decorative moulding edging on one side the styles and rails mitred and joint at the corners by means of ms galvanised plastic brackets of size 75x220 mm having wall thickness 1 point 0 mm and stainless steel screws the styles of the shutter reinforced by inserting galvanised ms tube of size 25x20 mm and 1 mmpluse or minus 0 point 1 mm wall thickness the lock rail made up of h section a upvc hollow section of size 100x30 mm and 2 mm pluse or minus 0 point 2 mm wall thickness fixed to the shutter styles by means of plastic galvanised ms u cleats the shutter frame filled with a upvc multi chambered single panel of size not less than 620 mm having over all thickness of 20 mm and 1 mm pluse or minus 0 point 1 mm wall thickness the panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised ms rod and fastened with nuts and washers complete as per manufacturers specification including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing factory made panel pvc door shutter consisting of frame made out of ms tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top and bottom rails ms frame shall have a coat of steel primers of approved make and manufacture ms frame covered with 5 mm thick heat moulded pvc c channel of size 30 mm thickness 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick 95 mm wide pvc sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide pvc sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail top bottom and lock rails shall be provided both side of the panel 10 mm 5 mm x 2 thick 20 mm wide cross pvc sheet be provided as gap insert for top rail and bottom rail paneling of 5 mm thick both side pvc sheet to be fitted in the ms frame welded sealed to the styles and rails with 7 mm 5 mm 2 mm thick x 15 mm wide pvc sheet beading on inner side and joined together with solvent cement adhesive an additional 5 mm thick pvc strip of 20 mm width is to be stuck on the interior side of the c channel using pvc solvent adhesive etc complete as per direction of engineer in charge manufacturers specification and drawing 30 mm thick plain pvc door shutters including cost of labor tools and tackles taxes etc complete as per direction of engineer in charge, providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is 13592 type including jointing with seal ring conforming to is 5382 leaving 10 mm gap for thermal expansion\ni single socketed pipes, providing mixing and applying sbr polymer of approved make modified cement mortar in proportion of 1 isto 4 1 cement 4 graded coarse sand with polymer minimum 2 percentage by wt of cement used as per specifications and directions of engineer in charge note measurement and payment the pre measurement of thickness shall be done just after the surface preparation is completed and payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding tapping with a blunt metal instrument and or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 n per sqmm2 25 mm average thickness in 2 layers, providing and injecting approved grout in proportion recommended by the manufacturer into cracks honey comb area of concrete masonry by suitable gun pump at required pressure including cutting of nipples after curing etc complete as per directions of engineer incharge the payment shall be made on the basis of actual weight of approved grout injected stirrer mixed acrylic polymer of approved make 2 percentage of weight of cement used modified cement slurry made with non shrink compound in concrete rcc work, providing and injecting approved grout in proportion recommended by the manufacturer into cracks honey comb area of concrete masonry by suitable gun pump at required pressure including cutting of nipples after curing etc complete as per directions of engineer incharge the payment shall be made on the basis of actual weight of approved grout injected stirrer mixed sbr polymer of approved make modified cement slurry made with shrinkage compensating cement in concrete rcc work, providing and injecting approved grout in proportion recommended by the manufacturer into cracks honey comb area of concrete masonry by suitable gun pump at required pressure including cutting of nipples after curing etc complete as per directions of engineer incharge the payment shall be made on the basis of actual weight of approved grout injected epoxy injection grout in concrete rcc work of approved make, providing laying spreading and compacting graded stone aggregate size range 53 mm to 0 point 075 mm to wet mix macadam wmm specification including premixing the material with water at omc in for all leads and lifts laying in uniform layers with mechanical paverfinisher in sub base base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density complete as per specifications and directions of engineer incharge

Agency / Dept : uranium corporation of india limited UCIL
Tender Value : 4584011.75
Due Date : Apr 24, 2026
View Documents
T18 Ref No : 14909381
Location : etah , uttar pradesh
Source : GEM Tenders

corrigendum tender for surface dressing of the ground , earth work in excavation , excavating, supplying and filling of local earth , cement concrete of specified grade , brick work with common burnt clay f.p.s. , treatment of soil , specified grade of reinforced cement concrete , centering and shuttering including strutting etc , centering and shuttering including propping etc , steel reinforcement for r.c.c. , structural steel work in single section , steel work in built up tubular , cement concrete , corrugated g.s. sheet roofing , 40 cm overall width plain g.s. sheet , 12 or 15 mm cement plaster , cement concrete flooring , 60mm thick factory made interlocking paver block of m -30 , providing and laying vitrified floor tiles , ceramic glazed floor tiles of size 300x300 mm , insulated sandwich puf panels , insulated sandwich puf panels, having tongue and groove joinery system , precoated galvanised steel sheet roofing accessories , providing wood work in frames of doors, windows , chromium polished iron fittings with screw , aluminium tower bolts , door stopper , stainless steel wire gauge , upvc casement cum fixed glazed window , upvc white fixed glazed window or ventilators , nickel plated m.s. pipe curtain rods with nickel plated brackets , providing and applying white cement based putty , finishing walls with acrylic smooth exterior paint , false ceiling at all height , painting with synthetic enamel paint , wall face unplasticised rigid pvc rain water pipes , moulded unplasticised rigid pvc rain water pipes , rigid pvc rain water pipes , cpvc pipes , cpvc pipes having thermal stability , stainless steel kitchen sink , polyethylene water storage tank , ball valve brass of 25 mm nominal bore , pvc nahani trap of heavy quality , c.p. brass long body bib cock , gun metal non return valve , wiring for light point fan point exhaust fan point , gi box with modular plate , gi box wih modular plate , 3 pin 5 a ceiling rose bulb holder , wiring for light power plug , wiring for circuit submain wiring , 2 x 6 sq. mm plus 1 x 6 sq. mm earth wire , 9w b22 led white lamp , 24watt led batten tube light , 300mm high speed 12 inches air exhaust fan , single pole and neutral sheet steel mcb , c curve miniature circuit breaker , 5 a to 32 a rating miniature circuit breaker , double pole 240 v rccb , 3.5 core aluminium armoured cable , supply and termination of cable lugs , 25 mm x 5 mm copper strip, surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m. - all kinds of soil, earth work in excavation by mechanical means (hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. all kinds of soil, excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete., providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level -1/4/8 (1 cement /4 coarse sand (zone-iii) / 8 graded stone aggregate 40 mm nominal size), brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in- cement mortar 1/4 (1 cement / 4 coarse sand), treatment of soil under existing floors using chemical emulsion - one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 /2 (1 cement /2 coarse sand) to match the existing floor/ with hlorpyriphos/lindane e.c. 20 percent with percent concentration, providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level - 1/1.5/3 (1 cement /1.5 coarse sand /3 graded stone aggregate 20 mm nominal size), centering and shuttering including strutting, propping etc. and removal of form for all heights foundations, footings, bases of columns, etc. for mass concrete, centering and shuttering including strutting, propping etc. and removal of form for - lintels, beams, plinth beams, girders, bressumers and cantilevers, steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level and above plinth, structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete., steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. hot finished welded type tubes, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level- 1/2/4 (1 cement /2 coarse sand (zone-iii) / 4 graded stone aggregate 20 mm nominal size), providing corrugated g.s. sheet roofing including vertical / curved surface fixed with polymer coated j or l hooks, bolts and nuts 8 mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm per sqm, providing and fixing of 40 cm overall width plain g.s. sheet fixed with polymer coated j or l hooks, bolts and nuts, g.l. limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1/3 (1 cement / 3 coarse sand). 1.00 mm thick with zinc coating not less than 275 gm/sqm, 12 mm cement plaster of mix or 15 mm cement plaster on rough side of single or half brick wall of mix - 1/4 (1 cement/ 4 coarse sand), cement concrete flooring 1/2/4 (1 cement / 2 coarse sand/ 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. - 40 mm thick with 20 mm nominal size stone aggregate, providing and laying 60mm thick factory made cement concrete interlocking paver block of m -30 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of engineer-in-charge., providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08 percent and conforming to is - 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1-4 (1 cement - 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600 mm, providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to is -15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1/4 (1 cement / 4 coarse sand), jointing with grey cement slurry at 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete., providing and fixing of insulated sandwich puf panels, having tongue and groove joinery system, made out from continuous line automatic machine. total wall thickness 50 mm and width 1.0 mtr with micro ribs at 100mm c/c on both sides of panel. panel has 0.50 mm pre coated gi sheet on both side of polyurethane foam confirming to is 12436-1988 .the pre coated sheet shall be minimum 240 mpa steel grade confirming to is 14246-1995 and have zinc coating of minimum 120 gsm as per is 277-1992, 5 to7 microns epoxy primer on both side of the sheet and polyester top coat 15 to18 micron. the ppgi sheet have plastic protective guard film of minimum 25 micron to avoid scratches while transportation. the panels will be vertically joined together by tongue and groove joints. the pu foam will be self extinguishing, fire retardant type having minimum density of 40 plus/minus 2 kg /m3., providing and fixing of insulated sandwich puf panels, having tongue and groove joinery system, made out from continuous line automatic machine. total roof thickness 30/70 mm and width 1.0 mtr, where top side of panel having high ribs of 40mm, having 250 mm c/c pitch and bottom side of panel having micro ribs of at 100mm c/c. panel has 0.50 mm pre coated gi sheet on both side of polyurethane foam with external face being corrugated in shape for gi and pu foam both materials. the pre coated sheet shall be minimum 240 mpa steel grade confirming to is 14246-1995 and have zinc coating of minimum 120 gsm as per is 277-1992, 5 to7 microns epoxy primer on both side of the sheet and polyester top coat 15 to 18 micron. the ppgi sheet have plastic protective guard film of minimum 25 micron to avoid scratches while transportation. the roof panels are laid over existing frame work of trusses, columns and purlins fixed using self-drilling bolt with rubber washer including all type of flashing. the pu foam shall be self extinguishing, fire retardant type having minimum density of 40 plus/minus 2 kg /m3., providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (plus 0.05 percent) total coated thickness, zinc coating 120 grams per sqm as per is- 277, in 240 mpa steel grade, 5 to7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete - flashings/ aprons.( upto 600 mm) in ppgi, providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately) sal wood ., supply and fixing of chromium polished iron fittings with screw for doors and windows etc.l-drop 16 mm dia 10 inch long, providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is - 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete - 200x10 mm, supply and fixing of chromium polished iron fittings with screw for doors and windows etc. handle 6 inch long, providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc, providing and fixing stainless steel wire gauge (grade304) aperture 1.4mm and 0.50mm dia wire mosquito net over aluminium barfi jali with opening of grill approx 2 inches duly fixed in aluminium rectangular frame 40x18mm with 10mm groove at one side 1.25mm thick section with necessary screws over existing pvc windows including all labour, tandp etc required for proper completion of work., upvc casement cum fixed glazed window, providing and fixing factory made upvc white colour fixed glazed windows/ventilators comprising of upvc multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 plus or minus 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape and size according to upvc profile), upvc extruded glazing beads of appropriate dimension, epdm gasket, g.i fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing and direction of engineer-in-charge. (single / double glass panes and silicon sealant shall be paid separately)., providing and fixing nickel plated m.s. pipe curtain rods with nickel plated brackets - 20 mm dia (heavy type) or 25 mm dia (heavy type), providing and applying white cement based putty of average thickness i mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete., finishing walls with acrylic smooth exterior paint of required shade - new work (two or more coat applied at 1.67 ltr/10 sqm over and including priming coat of exterior primer applied at 2.20 kg/10 sqm)., as per item specification document

Agency / Dept : uttar pradesh rajya vidyut utpadan nigam limited UPRVUNL
Tender Value : 2147599.95
Due Date : Apr 04, 2026
View Documents
T18 Ref No : 15329557
Location : north 24 paraganas , west bengal
Source : GEM Tenders

tender for kraz mt 1611 adaptor part no nk , air pipe part no 255b13506214 , cab fan assy part no 214b8104010a , cab floor sheet for foot rest part no nk , cab floor sheet middle rh aps part no nk , channel allu double bedding 1 is equal to 2 1by2 part no nk , clamp stand frt board corner lh and rh part no nk , data plate part no nk , e channel aluminium double row part no nk , fog head lamp halogen bulb aps part no nk , front convoy light bracket part no nk , gasket part no 2361704017a2 , gasket cover aps part no nk , gasket fuel tank cap part no nk , gasket steering knuckle part no nk , hose part no 255b312506001 , hose air horn aps part no nk , hose assy part no 2503506085 , hose drain rear part no 256b3408046 , monogram part no nk , oil seal part no nk , pipe assy to lh front brake cyl part no 255b13506281 , pipe to pressure gauge part no 255b1383004410 , pipe rear brake valve to fwd r by axle brak part no 255b13506295 , pneumatic horn part no nk , ring part no n122x182 , s by glass b by cabin 11 point 5 x 16 with hole part no nk , seal by seal worm part no 5003401042 , sealing floor steering column part no 255b5107030b , sealing strip cover part no 2145304030 , sliding glass back cabin 11 point 5 part no nk , tool box weather strip large part no nk , tool box weather strip small part no nk, kraz mt 1611, adaptor, air pipe, cab fan assy, cab floor sheet for foot rest, cab floor sheet middle rh aps, channel allu double bedding 1 is equal to 2 1 by 2, clamp stand frt board corner lh & rh, data plate, e channel aluminium double row, fog head lamp halogen bulb aps, front convoy light bracket, gasket, gasket cover aps, gasket fuel tank cap, gasket steering knuckle, hose, hose air horn aps, hose assy, hose drain rear, monogram, oil seal, pipe assy to lh front brake cyl, pipe to pressure gauge, pipe rear brake valve to fwd r by axle brak, pneumatic horn, ring, s/glass b by cabin 11 point 5 x 16 with hole, seal by seal worm, sealing floor steering column, sealing strip cover, sliding glass back cabin 11 point 5, tool box weather strip large, tool box weather strip small

Agency / Dept : indian army
Tender Value : 167461
Due Date : May 21, 2026
View Documents
GeM Registration Services By State
GeM Andhra Pradesh|GeM Assam|GeM Chandigarh|GeM Delhi|GeM Gujarat|GeM Himachal Pradesh|GeM Jharkhand|GeM Ladakh|GeM Maharashtra|GeM Puducherry|View All
GeM Registration Services By City
GeM Ahmedabad|GeM Mumbai|GeM New Delhi|GeM Hyderabad|GeM Chennai|GeM Kolkata|GeM Pune|GeM Jaipur|GeM Kanpur|GeM Indore|GeM Patna|GeM Nashik|GeM Varanasi|GeM Ranchi|GeM Coimbatore|GeM Amritsar|GeM Hubli|View All